Liquid-liquid extraction combined with online cleanup for the simultaneous determination of PAHs by GC-MS/MS and their hydroxylated metabolites by LC-MS/MS in human fingernails

Length-controlled hydrophobic CF3-COF as a highly efficient absorbent coating for dual-mode solid-phase microextraction of sixteen polycyclic aromatic hydrocarbons in water samples

Polycyclic aromatic hydrocarbons (PAHs), a group of seriously hazardous environmental contaminants, have attracted extensive attention due to their carcinogenicity, genotoxicity, mutagenicity, and ubiquity. In this work, the excellent hydrophobic trifluoromethyl-enriched covalent organic framework (CF3-COF) was designed and synthesized as coating of solid-phase microextraction (SPME). The CF3-COF offered a high adsorption selectivity for PAHs, which could be attributed to the multiple interactions between the CF3-COF and PAHs, including hydrophobicity interaction, π-π and H bond interactions. Furthermore, headspace (HS) and direct immersion (DI) dual-mode solid-phase microextraction (HS/DI-SPME) were innovatively integrated as a dual-mode extraction by varying the length of SPME coating on stainless-steel, which could simultaneously and efficiently extract 16 PAHs with different volatile. Amazingly, the proposed strategy achieved fast adsorption for PAHs and shortened the adsorption equilibrium time to 15 min. By further integrating with gas chromatography tandem mass spectrometry (GC-MS/MS), PAHs could be detected in the range of 0.008-0.16 ng mL-1 with a quantitative limit of 0.029-0.47 ng mL-1, respectively. The recoveries of PAHs in water samples ranged from 80.84 to 117.67 %. This work indicates that the dual-mode CF3-COF-SPME is a promising candidate for the enrichment of multiple hazardous substances in complicated samples.

Fabrication and application of Zn5 functionalized copolymer monolithic column for pipette tip micro-solid phase extraction of 4 polycyclic aromatic hydrocarbons in edible oil

The contamination of polycyclic aromatic hydrocarbons (PAHs) in edible oil is a health threat. Thus, trace analysis of PAHs is of high necessity. Based on the efficient adsorption of PAHs on Zn₅ metal cluster, a Zn₅ functionalized copolymer monolithic column was rationally designed for pipette tip micro-solid phase extraction (μ-SPE). The modified Zn₅ improved the adsorption selectivity and capacity of the monolith for naphthalene, phenanthrene, fluoranthene and pyrene. Chemical doping and copolymerization stabilized the monolith with a long life. Under optimal extraction conditions, a μ-SPE-high performance liquid chromatography with ultraviolet detector method was established for the detection of 4 PAHs in edible oils. The method yielded detection ranges of 0.15-250 μg L^-1 (R² > 0.997), detection limits of 0.050-1.5 μg L^-1, satisfactory recoveries (86.3-101.5 %), and high precisions (RSDs < 7.9 %). The results indicated that the Zn₅ functionalized copolymer monolithic column was an ideal separation medium for the detection of PAHs residues in edible oils.

Analytical method for the determination of usually prescribed antibiotics in human nails using UHPLC-MS/MS. Comparison of the efficiency of two extraction techniques

Antibiotics are a group of drugs used for the treatment of bacterial diseases. They are used in both human and veterinary medicine and, although they are not permitted, they are sometimes used as growth promoters. The present research compares two extraction techniques: ultrasound-assisted extraction (UAE) and microwave-assisted extraction (MAE) in order to evaluate their efficiency in the determination of 17 usually prescribed antibiotics in human nails. The extraction parameters were optimized using multivariate techniques. Once both techniques were compared, MAE was selected as optimal due to its greater experimental practicability together with the better extraction efficiencies it provides. Target analytes were detected and quantified by ultra-high performance liquid chromatography with tandem mass spectrometry detection (UHPLC-MS/MS). The run time was 20 min. The methodology was then successfully validated, obtaining acceptable analytical parameters according to the guide used. Limits of detection were between 0.3 and 3 ng g^-1 and limits of quantification were in the range from 1.0 to 4.0 ng g^-1. Recovery percentages ranged from 87.5% to 114.2%, and precision (in terms of standard deviation) was less than 15% in all cases. Finally, the optimized method was applied to nails taken from 10 volunteers and the results revealed the presence of one or more antibiotics in all the samples examined. The most commonly found antibiotic was sulfamethoxazole, followed by danofloxacin and levofloxacin. The results demonstrated, on the one hand, the presence of these compounds in the human body and, on the other hand, the suitability of nails as a non-invasive biomarker of exposure.

Atomically Dispersed ZnN5 Sites Immobilized on g-C3 N4 Nanosheets for Ultrasensitive Selective Detection of Phenanthrene by Dual Ratiometric Fluorescence

Ultrasensitively selective detection of trace polycyclic aromatic hydrocarbons (PAHs) like phenanthrene (PHE) is critical but remains challenging. Herein, atomically dispersed Zn sites on g-C₃ N₄ nanosheets (sZn-CN) are constructed by thermal polymerization of a Zn-cyanuric acid-melamine supramolecular precursor for the fluorescence detection of PHE. A high amount (1.6 wt%) of sZn is grafted in the cave of CN with one N vacancy in the form of unique Zn(II)N₅ coordination. The optimized sZn-CN achieves a wide detection range (1 ng L^-1 to 5 mg L^-1 ), ultralow detection limit (0.35 ng L^-1 , with 5-order magnitude improvement over CN), and ultrahigh selectivity toward PHE even among typical PAHs based on the built PHE-CN dual ratiometric fluorescence method. By means of in situ Fourier transform infrared spectroscopy, time-resolved absorption and fluorescence spectroscopy, and theoretical calculations, the resulting superior detection performance is attributed to the favorable selective adsorption of PHE on as-constructed atomic Zn(II)N₅ sites via the ionic cation-π interactions (Zn^δ+ C₂ ^δ- type), and the fluorescence quenching is dominated by the inner filter effect (IFE) from the multilayer adsorption of PHE at low concentrations, while it is done by the protruded photogenerated electron-transfer process, as well as IFE from the monolayer adsorption of PHE at ultralow concentration.

New insight into human health risk from polycyclic aromatic hydrocarbons on surfaces of buildings and facilities for industrial legacy regeneration

Although many industrial heritage sites have been repurposed into attractive landscapes, the contamination and health risks from polycyclic aromatic hydrocarbons (PAHs) on industrial legacy surfaces remain unexplored. We collected 441wiping surface samples from 95 buildings and facilities at Beijing coking plant in China and found that the concentrations of 16 US EPA priority PAHs (∑₁₆PAHs) ranged from ND-982.16 and ND-4262.20 mg/m² on the surfaces of buildings and facilities, respectively. The main source of PAHs was the coking process, and spatial distribution of PAHs was consistent with ∑₁₆PAHs in the soil. The carcinogenic risks of BaP, DBA, BbF, BaA, Ind of the facilities remained as industrial heritage relics, and those of Bap, DBA and BbF in the buildings with commercial uses exceeded the acceptable level (10^-6). The hazard quotient of 9 PAHs was below the acceptable level (1.0). The remedial goals for BaP and DBA (0.11 mg/m²) and BbF, BaA and Ind (1.14 mg/m²) at the facility heritage relics were derived. Similarly, the RGs for the buildings with commercial uses of BaP, DBA and BbF were 0.16, 0.16, and 1.64 mg/m², respectively. Overall, we determined that carcinogenic PAHs on the surfaces of industrial legacy should be regulated for regeneration.