On the origin of colloidal particles in the dispersion polymerization of aniline

Polyaniline derived carbon membrane and its in-situ membrane fouling mitigation performance in MBR based on metal-free electro-Fenton

An electro-enhanced membrane bioreactor (EMBR) was constructed with polyaniline-based carbon (PAC) separation membrane as the membrane-electrode, which could realize the in-situ electro-generation and activation of H₂O₂ to ·OH depending on the graphitic and pyridinic N as active sites without metal catalyst. After the continuous operation of the bioreactor for 74 days, approximately 77.41% irreversible membrane fouling occurred on the electrochemically enhanced membrane, which was less than that on the control membrane (85.96%). The ·OH oxidation combined with electrostatic barrier formed by -1.0 V enhanced PAC membrane suppressed the extracellular polymeric substances deposition on membrane. After operation, the strength of total cell, proteins, β-polysaccharides and α-polysaccharides on the membrane without bias were 5.17, 4.32, 9.65 and 16.31, respectively. In EMBR, the corresponding strength were 2.03, 3.35, 2.15 and 6.73. After calculation, the unblocked pores accounted for 35.3% and 78.5% of the total membrane surface in MBR and EMBR, respectively, indicating the fouling was alleviated obviously. Meanwhile, the EMBR owned a satisfactory wastewater treatment effect with average effluent chemical oxygen demand and NH₄⁺-N around 18.98 mg/L and 0.68 mg/L. The successful implementation of this strategy achieved a green and metal-free method for ·OH production with electrochemical effect for membrane fouling control in MBR.

Application of Polyaniline for Flexible Semiconductors

“In situ” polymerization method was used to develop PANI-PSSA /textile. Polyaniline doped with polystyrene sulfonic acid (PANI-PSSA) used as coatings for textiles were obtained by aqueous and emulsion route. The emulsion route uses chloroform as solvent. Polymerization has been achieved in one step on the wool or polyamide textiles. For coated and uncoated textiles, dried at room temperature, were characterized structurally by Infrared Spectroscopy with Attenuated Total Reflectance (ATR), morphologically by Scanning Electron Microscopy (SEM), and by Atomic Force Microscopy (AFM) and electrically. The synthesis methods lead to differences in structure, morphology and properties of the coated polyamide and wool textiles.

Cu2+-modified hollow carbon nanospheres: an unusual nanozyme with enhanced peroxidase-like activity

A Cu²⁺-modified carboxylated hollow carbon nanospheres (Cu²⁺-HCNSs-COOH) was designed with enhanced peroxidase-like activity for the detection of hydrogen peroxide (H₂O₂) and degradation of methylene blue (MB). Hollow polymer nanospheres were fabricated from aniline, pyrrole, Triton-100, and ammonium persulfate via confined interfacial copolymerization reaction, which can be pyrolyzed to create HCNSs with the hollow gap diameter of about 20 nm under high temperature. Combining the synergistic effect of coordination and electrostatic interaction, Cu²⁺-HCNSs-COOH was constructed by anchoring Cu²⁺ on the surface of HCNSs-COOH. Furthermore, Cu²⁺-HCNSs-COOH has higher affinity for 3,3',5,5'-tetramethylbenzidine and H₂O₂ of 0.20 mM and 0.88 mM, respectively. Based on the rapid response of Cu²⁺-HCNSs-COOH to H₂O₂, we constructed a colorimetric sensing platform by detecting the absorbance of the 3,3',5,5'-tetramethylbenzidine-H₂O₂ system at 652 nm for quantifying H₂O₂, which holds good linear relationship between 1 and 150 μM and has a detection limit of 0.61 μM. We also investigated the degradation of MB in the presence of Cu²⁺-HCNSs-COOH and H₂O₂, which can degrade 80.7% pollutants within 30 min. This research developed an unusual nanozyme for bioassays and water pollution treatment, which broadened the way for the rapid development of clinical diagnostics and water pollution treatment.

Cell-compatible conducting polyaniline films prepared in colloidal dispersion mode

Conducting polyaniline can be prepared and modified using several procedures, all of which can significantly influence its applicability in different fields of biomedicine or biotechnology. The modifications of surface properties are crucial with respect to the possible applications of this polymer in tissue engineering or as biosensors. Innovative technique for preparing polyaniline films via in-situ polymerization in colloidal dispersion mode using four stabilizers (poly-N-vinylpyrrolidone; sodium dodecylsulfate; Tween 20 and Pluronic F108) was developed. The surface energy, conductivity, spectroscopic features, and cell compatibility of thin polyaniline films were determined using contact-angle measurement, the van der Pauw method, Fourier-transform infrared spectroscopy, and assay conducted on mouse fibroblasts, respectively. The stabilizers significantly influenced not only the surface and electrical properties of the films but also their cell compatibility. Sodium dodecylsulfate seems preferentially to combine both the high conductivity and good cell compatibility. Moreover, the films with sodium dodecylsulfate were non-irritant for skin, which was confirmed by their in-vitro exposure to the 3D-reconstructed human tissue model.

Nano-functionalized filamentous fungus hyphae with fast reversible macroscopic assembly & disassembly features

Hyphae help polyaniline nanoparticles to assemble & disassemble macroscopically.

Toward an understanding of the formation of conducting polymer nanofibers

Introducing small amounts of additives into polymerization reactions to produce conducting polymers can have a profound impact on the resulting polymer morphology. When an oligomer such as aniline dimer is added to the polymerization of aniline, the nanofibers produced are longer and less entangled than those typically observed. The addition of aniline dimer can even induce nanofiber formation under synthetic conditions that generally do not favor a nanofibrillar morphology. This finding can be extended to both the synthesis of polythiophene and polypyrrole nanofibers. The traditional oxidative polymerization of thiophene or pyrrole only produces agglomerated particles. However, when minute amounts of thiophene or pyrrole oligomers are added to the reaction, the resulting polymers possess a nanofibrillar morphology. These results reveal important insights into a semirigid rod nucleation phenomenon that has hitherto been little explored. When polyaniline nucleates homogeneously, surface energy requirements necessitate the formation of ordered nuclei which leads to the directional polymerization of aniline. This ultimately leads to the one-dimensional nanofibrillar morphology observed in the final product. The synthetic procedures developed here are simple, scalable, and do not require any templates or other additives that are not inherent to the polymer.

Wires, plates, flowers, needles, and core-shells: diverse nanostructures of gold using polyaniline templates

A simple and versatile method for the synthesis of a wide range of polyaniline (PANI)-based 1D and 2D gold nanostructures of uniform size distribution with high colloidal stability is demonstrated. All the nanostructures were synthesized from oligoaniline-coated gold nanoparticle precursors. The nanostructures include nanowires of various sizes, nanoplates, and flower-like nanoparticles. These nanowires showed a pH-dependent shape transformation. Needle-like aggregates of Au/PANI were formed as the pH of the nanowire solution changed to 2.5. At higher pH (10.2), nanowires converted into spherical nanoparticles. Core-shell particles of Au/PANI composites have been achieved by the reversal of the pH of the nanowire from 10.2 to 2.9. The morphology of the nanostructures was studied by TEM and SEM. FTIR, UV-vis, XRD, and LDI MS were utilized for the characterization of the chemical composition of the nanostructures. A mechanism for the nanowire growth is proposed.

Synthesis of poly(2-hydroxypropyl methacrylate) latex particles via aqueous dispersion polymerization

Poly(2-hydroxypropyl methacrylate) latexes were prepared by aqueous dispersion polymerization at 60 °C using poly(-vinylpyrrolidone) [PNVP] as a steric stabilizer. The mean latex diameter can be controlled over a wide range by varying the synthesis parameters (initiator type, stabilizer concentration, addition of co-surfactant or comonomer), and narrow size distributions were observed in most cases. These sterically-stabilized latex particles were characterized by electron microscopy, dynamic light scattering, Malvern Mastersizer and FT-IR spectroscopy. The presence of the PNVP stabilizer at the surface of the latex particles was confirmed by X-ray photoelectron spectroscopy and the stabilizer content was assessed by H NMR spectroscopy and nitrogen microanalyses. Colloidally stable surfactant-stabilized poly(2-hydroxypropyl methacrylate) latexes could also be prepared in the absence of any PNVP stabilizer. Since 2-hydroxypropyl methacrylate contains a small amount of dimethacrylate impurity, these latexes are actually lightly cross-linked; their degree of swelling in DO, d-methanol and d-pyridine was investigated using dynamic light scattering and H NMR spectroscopy. Finally, three ionic water-soluble comonomers were successfully copolymerized with 2-hydroxypropyl methacrylate under aqueous dispersion conditions, as judged by aqueous electrophoresis studies.

pH- and thermosensitive polyaniline colloidal particles prepared by enzymatic polymerization

Polyaniline colloids were prepared by enzymatic polymerization using chitosan and poly(N-isopropylacrylamide) as steric stabilizers. The resulting nanoparticles undergo flocculation by changing the pH or temperature of the aqueous dispersions. The environmentally responsive behavior of these colloids contrasts with that of polyaniline colloids synthesized using poly(vinyl alcohol) as the steric stabilizer. The colloid size was a function of the steric stabilizers and ranged from approximately 50 nm for polyaniline particles prepared in the presence of chitosan and partially hydrolyzed poly(vinyl alcohol) up to 350 nm for the particles synthesized using poly(N-isopropylacrylamide). UV-visible and Fourier transform infrared spectroscopic studies indicate that polyaniline colloids are spectroscopically similar to those obtained by traditional dispersion polymerization of aniline by chemical oxidation. These polyaniline colloids have potential applications in thermochromic windows and smart fluids.

Shape and aggregation control of nanoparticles: not shaken, not stirred

The aggregation of nanoparticles during synthesis, particularly the effect of mechanical agitation, is investigated from a viewpoint of nucleation using a conjugated polymer, polyaniline, as an example. Homogeneous nucleation of polyaniline results in nanofibers, while heterogeneous nucleation leads to granular particulates. Mechanical agitation, which is a common method for disrupting aggregates, instead dramatically triggers aggregation during the synthetic process and favors the formation of granular particulates. Correlating the shape and aggregation of polyaniline nanoparticles with the mode of nucleation, a new aggregation mechanism is proposed in which aggregation is triggered by heterogeneous nucleation. The mechanism may be quite general as indicated by experiments with other materials such as silica nanoparticles. Highly dispersible polyaniline nanofibers can now be reproducibly prepared from a conventional reaction simply by not mechanically agitating the reaction and carrying it out at an elevated temperature. This work may prove to be of great value in reproducibly synthesizing nanoparticles with well-controlled sizes and shapes and in effectively preventing aggregation in chemical, pharmaceutical, and materials production processes.

Processable stabilizer-free polyaniline nanofiber aqueous colloids

Aqueous polyaniline colloids can be readily prepared by purifying polyaniline nanofibers and controlling the pH and self-stabilized via electrostatic repulsions without the need for any chemical modification or steric stabilizer, thus providing a simple and environmentally friendly way to process the conducting polymer in its conductive state both in bulk and at the nanometre level.

Synthesis of polyaniline–gold nanocomposites using “grafting from” approach

Polyaniline-gold nanocomposites containing polyaniline nanostructures attached to well-dispersed uniform-size gold nanoparticles were obtained using a surface initiation approach.