A slender-body micromechanical model for viscoelasticity of magnetic colloids: Comparison with preliminary experimental data

Particle Size in Secondary Particle and Magnetic Response for Carrageenan Magnetic Hydrogels

The relation between the number of magnetic particles and the change in storage modulus induced by a magnetic field was investigated for weak hydrogels containing carbonyl iron, iron oxide, and barium ferrite particles with different diameters in primary particles while maintaining the magnetization of magnetic particles. The change in storage modulus exhibited a power dependency against the number of magnetic particles, which was nearly independent of the magnetic particles. The change in storage modulus was successfully scaled by the reduced number of magnetic particles using the diameter of secondary particles. Microphotographs revealed that iron oxide and barium ferrite particles form aggregations while carbonyl iron particles are well dispersed in carrageenan gels. The diameter of secondary particles determined by a relation between the change in storage modulus and the reduced number of magnetic particles showed similar values with those observed in microphotographs.

Probing of field-induced structures and tunable rheological properties of surfactant capped magnetically polarizable nanofluids

Oil-based nanofluid containing surfactant-capped magnetite nanoparticles are synthesized by a simple coprecipitation approach, and their magnetorheological properties are studied for different magnetic field strengths and volume fractions. We observe a distinct "plateau-like region" in the shear thinning viscosity curve, under an external magnetic field, possibly due to a peculiar alignment of the chains with respect to the field direction where the structure is stable against fragmentation. The observed plateau regime is reminiscent to that of kinetically arrested gel networks. Interestingly, such a plateau regime has been observed only above certain critical magnetic field when the dipolar interaction strength is much greater than the thermal energy where the aggregation becomes a nonequilibrium transport-limited process. The good collapse of specific viscosity data against Mason number for different magnetic field strengths onto a single curve suggests the dominance of hydrodynamic and magnetic forces on thermal force above a certain magnetic field strength. The observed increase in both static and dynamic yield stresses under the magnetic field confirms the formation of columnar structures that hinder the flow behavior. The hysteresis observed in the magnetic sweep experiments shows the inability of the chains to relax within the measurement time. The dynamic measurements confirm that the field-induced structures impart elastic behavior to the dispersion, which is found to increase with magnetic field and saturates at higher field strengths.

Small-amplitude oscillatory shear magnetorheology of inverse ferrofluids

A comprehensive investigation is performed on highly monodisperse silica-based inverse ferrofluids under small-amplitude oscillatory shear in the presence of external magnetic fields up to 1 T. The effect of particle volume fraction and continuous medium Newtonian viscosity is thoroughly investigated. Experimental results for storage modulus are used to validate existing micromechanical magnetorheological models assuming different particle-level field-induced structures.

Effect of friction between particles in the dynamic response of model magnetic structures

A simple particle-level simulation model that takes into account interparticle friction forces is developed to describe the dynamic response of magneto-rheological fluids. The results obtained for single-width particle chains are found to be in good agreement with slender body theory predictions [J. de Vicente, M.T. López-López, J.D.G. Durán, G. Bossis, J. Colloid Interface Sci. 282 (2005) 193]. The addition of side chains to a single-width one results in one order of magnitude increase of storage modulus and relaxation. The double logarithmic plot of storage and loss moduli vs frequency gives a limiting slope of one when including friction forces between particles. Simulation results are found to be in agreement with experimental measurements on an iron/kerosene model MR-fluid.

Colloidal stability of magnetite/poly(lactic acid) core/shell nanoparticles

In this work, we describe an experimental investigation on the colloidal stability of suspensions of three kinds of particles, including magnetite, poly(lactic acid) (PLA), and composite core/shell colloids formed by a magnetite core surrounded by a PLA shell. The experiments were performed with dilute suspensions, so that recording the optical absorbance with time gives a suitable indication of the aggregation and sedimentation of the suspensions. The method allowed us to distinguish very accurately between the different surface and magnetic forces responsible for the structures acquired by particle aggregates. Thus, the pure PLA suspensions are very sensitive to ionic strength and almost unaffected by pH changes. On the contrary, the stability of magnetite systems is mainly controlled by pH. The effect of vertical magnetic fields on the stability of magnetite and magnetite/PLA suspensions is also investigated. The PLA shell reduces the magnetic responsiveness of magnetite, but it is demonstrated that the mixed particles can also form structures induced by the field, despite their lower magnetization, and they can be considered in magnetically targeted biomedical applications.