Lanthanum(III) and gadolinium(III) separation by cloud point extraction

Total Reflection X-ray Fluorescence Spectrometric Analysis of Ten Lanthanides at the Ultratrace Level Having a High Degree of Overlap in the Emission Lines

The extensive use of lanthanide elements in the medical, electrical, agricultural, and nuclear fields has increased their contamination in the environment. The detrimental effect of lanthanides on human health can be reduced or eliminated by their fast determination in the concerned specimen. For this purpose, an offline conjugation of the cloud point extraction (CPE) process with total reflection X-ray fluorescence (TXRF) spectrometry was done. This process was found to provide simple, quick, and precise simultaneous determination of ten lanthanides whose emission lines have a high degree of overlap at the ultratrace level. N,N,N',N'-tetra-octyl-diglycolamide in triton X-114 micelles was found to offer a selective CPE of all of the lanthanides in the presence of higher concentrations of naturally abundant cations and anions. A multivariative partial least-squares regression (PLSR) calibration approach was preferred due to the complex overlapped spectra of L lines of the lanthanides. Ten lanthanides, viz., La, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Tm, and Lu, were simultaneously determined by this method, having concentrations in the range from 10 to 5 × 103 μg L-1. The proposed method was validated by analyzing three certified reference materials (CRMs), viz., NASS-7 seawater, SRLS-6 river water, and NIST 1640a natural water, via standard addition with the relative standard deviations of ≤10%.

A centrifuge-less cloud point extraction-spectrophotometric determination of copper(II) using 6-hexyl-4-(2-thiazolylazo)resorcinol

A simple, cheap, and environmentally friendly centrifuge-less cloud point extraction procedure was developed for the preconcentration of traces of Cu(II) before its spectrophotometric determination. It is based on a complexation reaction with the hydrophobic azo reagent 6-hexyl-4-(2-thiazolylazo)resorcinol (HTAR), in which a complex with a stoichiometric ratio of 1:1 and an absorption maximum at 535 nm is formed. The experimental conditions for Cu(II) determination were found: HTAR concentration (8 × 10^-6 mol mL^-1), mass fraction of the surfactant Triton X-114 (2.2%), pH (5.9, ammonium acetate buffer), and incubation time (10 min at 60 °C). The linear range, limit of detection, molar absorption coefficient and preconcentration factor were calculated to be 4.5-254 ng mL^-1, 1.34 ng mL^-1, 2.54 × 10⁵ L mol^-1 cm^-1, and 10, respectively. The effect of foreign ions was studied, and the proposed procedure was applied to the analysis of water samples and a saline solution for intravenous infusion.

Crown Ether-Immobilized Cellulose Acetate Membranes for the Retention of Gd (III)

This study presents a new, revolutionary, and easy method of separating Gd (III). For this purpose, a cellulose acetate membrane surface was modified in three steps, as follows: firstly, with aminopropyl triethoxysylene; then with glutaraldehyde; and at the end, by immobilization of crown ethers. The obtained membranes were characterized by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS), through which the synthesis of membranes with Gd (III) separation properties is demonstrated. In addition, for the Gd (III) separating process, a gadolinium nitrate solution, with applications of moderator poison in nuclear reactors, was used. The membranes retention performance has been demonstrated by inductively coupled plasma mass spectrometry (ICP-MS), showing a separation efficiency of up to 91%, compared with the initial feed solution.

Magnetic Nanohydrometallurgy Applied to Lanthanide Separation

Lanthanides play an important role in modern technology because of their outstanding optical, electronic, and magnetic properties. Their current hydrometallurgical processing involves lixiviation, leading to concentrates of elements whose separation requires exhaustive procedures because of their similar chemical properties. In this sense, a new nanotechnological approach is here discussed, involving the use of iron oxide nanoparticles functionalized with complexing agents, such as diethylenetriaminepentaacetic acid (DTPA), for carrying out the magnetic extraction and separation of the lanthanide ions in aqueous solution. This strategy, also known as magnetic nanohydrometallurgy (MNHM), was first introduced in 2011 for dealing with transition metal recovery in the laboratory, and has been recently extended to the lanthanide series. This technology is based on lanthanide complexation and depends on the chemical equilibrium involved. It has been better described in terms of Langmuir isotherms, considering a uniform distribution of the metal ions over the nanoparticles surface, as evidenced by high angle annular dark field microscopy. The observed affinity parameters correlate with the lanthanide ion contraction series, and the process dynamics have been studied by monitoring the nanoparticles migration under an applied magnetic field (magnetophoresis). The elements can be reversibly captured and released from the magnetically confined nanoparticles, allowing their separation by a simple acid-base treatment. It can operate in a circular scheme, facilitated by the easy magnetic recovery of the extracting agents, without using organic solvents and ionic exchange columns. MNHM has been successfully tested for the separation of the lanthanide elements from monazite mineral, and seems a promising green nanotechnology, particularly suitable for urban mining.

Cloud point extraction-flame atomic absorption spectrometry for pre-concentration and determination of trace amounts of silver ions in water samples

A cloud point extraction (CPE) method was used as a pre-concentration strategy prior to the determination of trace levels of silver in water by flame atomic absorption spectrometry (FAAS) The pre-concentration is based on the clouding phenomena of non-ionic surfactant, triton X-114, with Ag (I)/diethyldithiocarbamate (DDTC) complexes in which the latter is soluble in a micellar phase composed by the former. When the temperature increases above its cloud point, the Ag (I)/DDTC complexes are extracted into the surfactant-rich phase. The factors affecting the extraction efficiency including pH of the aqueous solution, concentration of the DDTC, amount of the surfactant, incubation temperature and time were investigated and optimized. Under the optimal experimental conditions, no interference was observed for the determination of 100 ng·mL⁻¹ Ag⁺ in the presence of various cations below their maximum concentrations allowed in this method, for instance, 50 μg·mL⁻¹ for both Zn²⁺ and Cu²⁺, 80 μg·mL⁻¹ for Pb²⁺, 1000 μg·mL⁻¹ for Mn²⁺, and 100 μg·mL⁻¹ for both Cd²⁺ and Ni²⁺. The calibration curve was linear in the range of 1–500 ng·mL⁻¹ with a limit of detection (LOD) at 0.3 ng·mL⁻¹. The developed method was successfully applied for the determination of trace levels of silver in water samples such as river water and tap water.

Metal and Metalloid Size-Fractionation Strategies in Spatial High-Resolution Sediment Pore Water Profiles

Sediment water interfaces (SWIs) are often characterized by steep biogeochemical gradients determining the fate of inorganic and organic substances. Important transport processes at the SWI are sedimentation and resuspension of particulate matter and fluxes of dissolved materials. A microprofiling and micro sampling system (missy), enabling high resolution measurements of sediment parameters in parallel to a direct sampling of sediment pore waters (SPWs), was combined with two fractionation approaches (ultrafiltration (UF) and cloud point extraction (CPE)) to differentiate between colloidal and dissolved fractions at a millimeter scale. An inductively coupled plasma-quadrupole mass spectrometry method established for volumes of 300 μL enabled the combination of the high resolution fractionation with multi-element analyzes. UF and CPE comparably indicated that manganese is predominantly present in dissolved fractions of SPW profiles. Differences found for cobalt and iron showed that the results obtained by size-dependent UF and micelle-mediated CPE do not necessarily coincide, probably due to different fractionation mechanisms. Both methods were identified as suitable for investigating fraction-related element concentrations in SPW along sediment depth profiles at a millimeter scale. The two approaches are discussed with regard to their advantages, limitations, potential sources of errors, further improvements, and potential future applications.

Complexation of Cu(II) by original tartaric acid-based ligands in nonionic micellar media: thermodynamic study and applications

The complexation of Cu(II) with original alkylamidotartaric acids (C(x)T) is investigated in homogeneous aqueous medium and in the presence of nonionic micelles of Brij 58 (C16EO20), thanks to various analytical techniques such as NMR self-diffusion experiments, CD and UV-vis spectroscopy, ESI mass spectrometry, pHmetry and micellar-enhanced ultrafiltration (MEUF). First, a complete speciation study proves the formation of dimeric complexes in water and provides their formation constants. Second, a similar study is led in the presence of nonionic micelles. It underlines a modification of the apparent equilibrium constants in micellar medium and demonstrates that the structure of the complexes is slightly modified in the presence of micelles. This thermodynamic and structural study is applied to modelize the evolution of the extraction yields of Cu(II) by the micelles as a function of pH and to identify the complexes extracted in the micelles. The effects of the chain length of the ligand (C3T vs C8T) on the solubilization properties are put into relief and discussed. Anionic species are proved to be more incorporated in the nonionic micelles than the cationic species. The extracting system constituted of octylamidotartaric acid (CsT) solubilized in nonionic micelles of Brij 58 is demonstrated to be very efficient for the extraction of Cu(II) by MEUF, this technique being an interesting green alternative to traditional solvent extraction.

Combination of cloud point extraction and flame atomic absorption spectrometry for preconcentration and determination of trace iron in environmental and biological samples

In the presented work, the conditions for cloud point extraction of iron from aqueous solutions using 7-iodo-8-hydroxyquinolin-5-sulphonic acid (Ferron) was investigated and optimized. The procedure is based on the separation of its ferron complex into the micellar media by adding the surfactant Triton X-114. After phase separation, the surfactant-rich phase was dissolved with 1.0 M HNO3 in methanol. Iron was determined by flame atomic absorption spectrometry. Optimization of the pH, ligand and surfactant quantities, incubation time, temperature, viscosity, sample volume, and interfering ions were investigated. The effects of the matrix ions were also examined. The detection limits for three times the standard deviations of the blank for iron was 0.4 ng m L-1, enrichment factor of 19.6 and preconcentration factor of 30 could be achieved. The validity of cloud point extraction was checked by employing real samples including soil, blood, spinach, milk, meat, liver and orange juice samples using the standard addition method, which gave satisfactory results.In the presented work, the conditions for cloud point extraction of iron from aqueous solutions using 7-iodo-8-hydroxyquinolin-5-sulphonic acid (Ferron) was investigated and optimized. The procedure is based on the separation of its ferron complex into the micellar media by adding the surfactant Triton X-114. After phase separation, the surfactant-rich phase was dissolved with 1.0 M HNO3 in methanol. Iron was determined by flame atomic absorption spectrometry. Optimization of the pH, ligand and surfactant quantities, incubation time, temperature, viscosity, sample volume, and interfering ions were investigated. The effects of the matrix ions were also examined. The detection limits for three times the standard deviations of the blank for iron was 0.4 ng m L−1, enrichment factor of 19.6 and preconcentration factor of 30 could be achieved. The validity of cloud point extraction was checked by employing real samples including soil, blood, spinach, milk, meat, liver and orange juice samples using the standard addition method, which gave satisfactory results.

Lyophilic properties of surfactant-rich phases of polyethoxylated alkylphenols formed at cloud point temperature

The influence of the concentration conditions, solutions acidity, and electrolyte additions on the lyophilic properties of the surfactant-rich phases of polyethoxylated alkylphenols OP-7 and OP-10 formed at cloud point temperature were studied. The lyophilic properties of surfactant-rich phases were determined by estimating of their effective hydration values and solvation free energy of methylene and carboxyl groups at cloud point extraction of aliphatic monocarboxylic acids. It was shown that the surfactant-rich phases formed from the dilute surfactant solutions have more hydrophobic properties than the phases formed from the high concentrated solutions. The possibility of changing the lyophilic properties of surfactant-rich phases by electrolyte additions was shown: complex formation between electrolyte cation and the polyoxyethylene chain of the surfactant increases the hydrophilic properties of the surfactant-rich phases. Calculations of the solvation free energy of methylene and carboxylic fragments of the aliphatic carboxylic acids at micellar extraction showed the uniqueness of the surfactant-rich phases which are able to energetically advantageously extract both hydrophilic and hydrophobic molecules of substrates.