High internal phase CO2-in-water emulsions stabilized with a branched nonionic hydrocarbon surfactant

High Internal Phase Emulsion Stabilization through Restricted Interdrop Fusion across Water Drainage Channels

This study introduces a promising approach to stabilize high internal phase emulsions (HIPEs) in which droplets are enveloped by octadecane (C18)-grafted bacterial cellulose nanofibers (BCNF_diC18), which are mainly surrounded by carboxylate anions and hydrophobically modified with C18 alkyl chains. For this purpose, BCNF_diC18, in which two octadecyl chains were grafted onto each of several cellulose unit rings on 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-mediated oxidized BCNFs, was fabricated using the Schiff base reaction. The wettability of BCNF_diC18 was adjusted by controlling the amount of the grafted C18 alkyl chain. Interfacial rheological analysis revealed that BCNF_diC18 enhanced the membrane modulus at the oil-water interface. We figured out that such a resilient interfacial membrane substantially prevented interdrop fusion across the water drainage channel formed between the jammed oil droplets, which was confirmed theoretically using the modified Stefan-Reynolds equation. These findings highlight that the use of surfactants in the form of nanofibers to form a rigid interfacial film plays a key role in hindering the interfusion of the internal phase and the collapse of the emulsion, which is essential for HIPE stabilization.

The role of excess attractive particles in the elasticity of high internal phase Pickering emulsions

A high internal phase emulsion (HIPE), which has a volume fraction of dispersed phase of over 74%, shows a solid-like property because of concentrated polyhedral droplets. Although many studies have proposed theoretical and empirical models to explain the rheological properties of HIPEs, most of them are only limited to the emulsions stabilized by surfactants. In the case of high internal phase Pickering emulsions (HIPPEs), much greater values of elastic modulus have been reported, compared to those of surfactant-stabilized HIPEs, but so far, there have been no clear explanations for this. In this study, we investigate how colloidal particles attribute to the significantly high elasticity of HIPPEs, specifically considering two different contributions, namely, interfacial rheological properties and bulk rheological properties. Our results reveal that the flocculated structures of colloidal particles that possess a significant elasticity can be interconnected between dispersed droplets. Furthermore, this elastic structure is a crucial factor in the high elasticity of HIPPEs, which is also supported by a simple theoretical model.

Deciphering the Structural Network That Confers Stability to High Internal Phase Pickering Emulsions by Cross-Linked Soy Protein Microgels and Their In Vitro Digestion Profiles

High internal phase Pickering emulsions (HIPPEs) stabilized by food-grade particles have received much attention in recent years. However, the stabilizing mechanism (e.g., structural network) in the continuous phase of HIPPEs stabilized by proteins is not well understood. In this work, we deciphered the stabilizing mechanisms that confer stability to HIPPEs produced from sunflower oil and soy protein microgels (SPMs). HIPPEs were fabricated at the protein concentrations of 1.50-2.00 wt % and oil volume fraction of 0.78-0.82. The cryo-scanning electron microscopy (cryo-SEM) observations indicated that there were two possible stabilizing mechanisms for HIPPEs at the protein concentrations of 1.50-2.00 wt %: the first is a stabilization provided by the shared monolayer of SPMs (at a protein concentration of 1.50%), and the other is stabilization provided by the distinct monolayer of SPMs (at protein concentrations of 1.75 and 2.00 wt %). The latter protein concentration created a thick network, formed by interacting SPMs, which trapped oil droplets. Results also confirmed that HIPPEs have an open-cell porous structure, forming a sponge-like morphology, where the internal phase was located. This study also investigated the digestibility of HIPPEs, suggesting a slower free fatty acid-releasing profile in in vitro intestinal digestion.

A Novel Supercritical CO2 Foam System Stabilized With a Mixture of Zwitterionic Surfactant and Silica Nanoparticles for Enhanced Oil Recovery

In order to improve the CO₂ foam stability at high temperature and salinity, hydrophilic silica nanoparticles (NPs) were added into a dilute zwitterionic surfactant solution to stabilize supercritical CO₂ (SC-CO₂) foam. In the present paper, the foaming capacity and stability of SC-CO₂ foam were investigated as a function of NP concentration at elevated temperatures and pressures. It was observed that the drainage rate of SC-CO₂ foam was initially fast and then became slower with NPs adsorption at the gas-liquid interface. The improved foam stability at high temperature was attributed to the enhanced disjoining pressure with addition of NPs. Furthermore, an obvious increase in the foam stability was noticed with the increasing salinity due to the screening of NP charges at the interface. The rheological characteristics including apparent viscosity and surface elasticity, resistance factor, and microstructures of SC-CO₂ foam were also analyzed at high temperature and pressure. With addition of 0.7% NPs, SC-CO₂ foam was stabilized with apparent viscosity increased up to 80 mPa·s and resistance factor up to 200. Based on the stochastic bubble population (SBP) model, the resistance factor of SC-CO₂ foam was simulated by considering the foam generation rate and maximum bubble density. The microstructural characteristics of SC-CO₂ foam were detected by optical microscopy. It was found that the effluent bubble size ranged between 20 and 30 μm and the coalescence rate of SC-CO₂ foam became slow with the increasing NP concentration. Oscillation measurements revealed that the NPs enhanced surface elasticity between CO₂ and foam agents for resisting external disturbances, thus resulting in enhanced film stability and excellent rheological properties.

Preparation of fluoropolymer materials with different porous morphologies by an emulsion template method using supercritical carbon dioxide as a medium

The choice of a suitable surfactant is key to the formation of a stable water-in-CO2 (W/C) or CO2-in-water (C/W) emulsion. It is even more critical in stabilization of the emulsion containing carbon dioxide (CO2). In this study, the successful preparation of W/C emulsion was achieved by using the amphiphilic block polymer poly(ethylene glycol) methyl ether-b-poly(trifluoroethyl methacrylate) (mPEG45-b-(TFEMA) n ) as a surfactant, in which CO2 was used as a solvent for the fluoromonomer, trifluoroethyl methacrylate (TFEMA). In the case of the W/C emulsion, CO2 and TFEMA were used as the continuous phase and water as the internal phase of the emulsion system. It has been found that in the length of the block polymer mPEG45-b-(TFEMA) n , the fluorine-containing chain end has a significant effect on the morphology of the polymer and the type of emulsion formed. The morphology of the polymer was observed by scanning electron microscopy which confirmed the type of emulsion formed. With the fluorine-containing end segment, the morphology of the polymer changes from a small hollow sphere in a large hollow sphere to a hollow spherical to a porous structure. Correspondingly, it could be concluded that the type of emulsion could go through the process from water-in-CO2-in-water-in-CO2 (W/C/W/C) emulsion to water-in-CO2-in-water (W/C/W) emulsion to water-in-CO2 (W/C) emulsion. Also, suitable co-surfactants were identified in this study. Investigations were also attempted to check the effect of the amount of surfactant, cross-linker and water/CO2 ratio on the type of emulsion formed as well as the morphology of the resultant polymer.

High-internal-phase emulsions stabilized by metal-organic frameworks and derivation of ultralight metal-organic aerogels

To design high-internal-phase emulsion (HIPE) systems is of great interest from the viewpoints of both fundamental researches and practical applications. Here we demonstrate for the first time the utilization of metal-organic framework (MOF) for HIPE formation. By stirring the mixture of water, oil and MOF at room temperature, the HIPE stabilized by the assembly of MOF nanocrystals at oil-water interface could be formed. The MOF-stabilized HIPE provides a novel route to produce highly porous metal-organic aerogel (MOA) monolith. After removing the liquids from the MOF-stabilized HIPE, the ultralight MOA with density as low as 0.01 g·cm(-3) was obtained. The HIPE approach for MOA formation has unique advantages and is versatile in producing different kinds of ultralight MOAs with tunable porosities and structures.

Ultradry Carbon Dioxide-in-Water Foams with Viscoelastic Aqueous Phases

For foams with ultra low water contents, the capillary pressure is very large and induces rapid drainage that destabilizes the aqueous lamellae between the gas bubbles. However, we show that high-pressure CO2-in-water foams can be stabilized with a viscoelastic aqueous phase composed of entangled wormlike micelles, even for extremely high CO2 volume fractions ϕ of 0.95 to 0.98; the viscosity of these ultradry foams increased by up to 3-4-fold, reaching more than 100 cP relative to foams formed with conventional low viscosity aqueous phases. The foam morphology consisted of fine ∼20 μm polyhedral-shaped CO2 bubbles that were stable for hours. The wormlike micelles were formed by mixing anionic sodium lauryl ether sulfate (SLES) with salt and a protonated cationic surfactant, as shown by cryogenic transmission electron microscopy (cryo-TEM) and large values of the zero-shear viscosity and the dynamic storage and loss moduli. With the highly viscous continuous aqueous phases, the foam lamella drainage rates were low, as corroborated by confocal microscopy. The preservation of viscous thick lamellae resulted in lower rates of Ostwald ripening relative to conventional foams as shown by high-pressure optical microscopy. The ability to stabilize viscous ultra high internal phase foams is expected to find utility in various practical applications, including nearly "waterless" fracturing fluids for recovery of oil and gas in shale, offering the possibility of a massive reduction in the amount of wastewater.

Amphiphile self-assemblies in supercritical CO2 and ionic liquids

Supercritical (sc) CO2 and ionic liquids (ILs) are very attractive green solvents with tunable properties. Using scCO2 and ILs as alternatives of conventional solvents (water and oil) for forming amphiphile self-assemblies has many advantages. For example, the properties and structures of the amphiphile self-assemblies in these solvents can be easily modulated by tuning the properties of solvents; scCO2 has excellent solvation power and mass-transfer characteristics; ILs can dissolve both organic and inorganic substances and their properties are designable to satisfy the requirements of various applications. Therefore, the amphiphile self-assemblies in scCO2 and ILs have attracted considerable attention in recent years. This review describes the advances of using scCO2 or/and ILs as amphiphile self-assembly media in the last decade. The amphiphile self-assemblies in scCO2 and ILs are first reviewed, followed by the discussion on combination of scCO2 and ILs in creating microemulsions or emulsions. Some future directions on the amphiphile self-assemblies in scCO2 and ILs are highlighted.

Amphiphiles for supercritical CO2

A semi-fluorinated hybrid amphiphile, pentadecafluoro-5-dodecyl (F7H4) sulfate, has been shown to form reversed micelles in dense CO(2); the aggregates evolve to form water-in-CO(2) (w/c) microemulsion droplets on addition of water. Aggregation structures in these w/c phases have been characterised by small-angle neutron scattering (SANS), showing the presence of cylindrical droplets, which change into dispersed lamellar phases at even higher water loadings. Other systems are also introduced, being high internal phase emulsions (HIPEs) with brine, and liquid and supercritical CO(2), stabilized by certain commercially available nonylphenol ethoxylates (Dow Tergitol NP-, and Huntsman Surfonic N- amphiphiles). These dispersions have been characterised by SANS for the first time. Quantitative analyses of the HIPEs SANS profiles show that they behave similarly to hydrocarbon-water emulsion analogues, with regard to total interfacial areas and the effects of amphiphile concentration on the underlying structures. Finally, the advantages and disadvantages of both approaches for controlling the physico-chemical properties of liquid/supercritical CO(2) in potential applications are compared and contrasted. These results highlight the importance of using specially designed CO(2)-philic amphiphiles for generating self-assembly structures in dense CO(2).

Universal surfactant for water, oils, and CO2

A trichain anionic surfactant sodium 1,4-bis(neopentyloxy)-3-(neopentyloxycarbonyl)-1,4-dioxobutane-2-sulfonate (TC14) is shown to aggregate in three different types of solvent: water, heptane, and liquid CO(2). Small-angle neutron scattering (SANS) has been used to characterize the surfactant aggregates in water, heptane, and dense CO(2). Surface tension measurements, and analyses, show that the addition of a third branched chain to the surfactant structural template is critical for sufficiently lowering the surface energy, tipping the balance between a CO(2)-incompatible surfactant (AOT) and CO(2)-philic compounds that will aggregate to form micelles in dense CO(2) (TC14). These results highlight TC14 as one of the most adaptable and useful surfactants discovered to date, being compatible with a wide range of solvent types from high dielectric polar solvent water to alkanes with low dielectrics and even being active in the uncooperative and challenging solvent environment of liquid CO(2).

Morphology and stability of CO2-in-water foams with nonionic hydrocarbon surfactants

The morphologies, stabilities, and viscosities of high-pressure carbon dioxide-in-water (C/W) foams (emulsions) formed with branched nonionic hydrocarbon surfactants were investigated by in situ optical microscopy and capillary rheology. Over two dozen hydrocarbon surfactants were shown to stabilize C/W foams with Sauter mean bubble diameters as low as 1 to 2 microm. Coalescence of the C/W foam bubbles was rare for bubbles larger than about 0.5 microm over a 60 h time frame, and Ostwald ripening became very slow. By better blocking of the CO(2) and water phases with branched and double-tailed surfactants, the interfacial tension decreases, the surface pressure increases, and the C/W foams become very stable. For branched surfactants with propylene oxide middle groups, the stabilities were markedly lower for air/water foams and decane-water emulsions. The greater stability of the C/W foams to coalescence may be attributed to a smaller capillary pressure, lower drainage rates, and a sufficient surface pressure and thus limiting surface elasticity, plus small film sizes, to hinder spatial and surface density fluctuations that lead to coalescence. Unexpectedly, the foams were stable even when the surfactant favored the CO(2) phase over the water phase, in violation of Bancroft's rule. This unusual behavior is influenced by the low drainage rate, which makes Marangoni stabilization of less consequence and the strong tendency of emerging holes in the lamella to close as a result of surfactant tail flocculation in CO(2). The high distribution coefficient toward CO(2) versus water is of significant practical interest for mobility control in CO(2) sequestration and enhanced oil recovery by foam formation.