Preparation of platinum-decorated porous graphite nanofibers, and their hydrogen storage behaviors

Recent Developments in Materials for Physical Hydrogen Storage: A Review

The depletion of reliable energy sources and the environmental and climatic repercussions of polluting energy sources have become global challenges. Hence, many countries have adopted various renewable energy sources including hydrogen. Hydrogen is a future energy carrier in the global energy system and has the potential to produce zero carbon emissions. For the non-fossil energy sources, hydrogen and electricity are considered the dominant energy carriers for providing end-user services, because they can satisfy most of the consumer requirements. Hence, the development of both hydrogen production and storage is necessary to meet the standards of a "hydrogen economy". The physical and chemical absorption of hydrogen in solid storage materials is a promising hydrogen storage method because of the high storage and transportation performance. In this paper, physical hydrogen storage materials such as hollow spheres, carbon-based materials, zeolites, and metal-organic frameworks are reviewed. We summarize and discuss the properties, hydrogen storage densities at different temperatures and pressures, and the fabrication and modification methods of these materials. The challenges associated with these physical hydrogen storage materials are also discussed.

Carbon-Based Sorbents for Hydrogen Storage: Challenges and Sustainability at Operating Conditions for Renewable Energy

It is estimated that all fossil fuels will be depleted by 2060 if we continue to use them at the present rate. Therefore, there is an unmet need for an alternative source of energy with high calorific value. In this regard, hydrogen is considered the best alternative renewable fuel that could be used in practical conditions. Accordingly, researchers are looking for an ideal hydrogen storage system under ambient conditions for feasible applications. In many respects, carbon-based sorbents have emerged as the best possible hydrogen storage media. These carbon-based sorbents are cost-effective, eco-friendly, and readily available. In this Review, the present status of carbon-based materials in promoting solid-state hydrogen storage technologies at the operating temperature and pressure was reported. Experimental studies have shown that some carbon-based materials such as mesoporous graphene and doped carbon nanotubes may have hydrogen storage uptake of 3-7 wt %, while some theoretical studies have predicted up to 13.79 wt % of hydrogen uptake at ambient conditions. Also, it was found that different methods used for carbon materials synthesis played a vital role in hydrogen storage performance. Eventually, this Review will be helpful to the scientific community for finding the competent material and methodology to investigate the existing hydrogen uptake issues at operating conditions.

Recent Progress Using Solid-State Materials for Hydrogen Storage: A Short Review

With the rapid growth in demand for effective and renewable energy, the hydrogen era has begun. To meet commercial requirements, efficient hydrogen storage techniques are required. So far, four techniques have been suggested for hydrogen storage: compressed storage, hydrogen liquefaction, chemical absorption, and physical adsorption. Currently, high-pressure compressed tanks are used in the industry; however, certain limitations such as high costs, safety concerns, undesirable amounts of occupied space, and low storage capacities are still challenges. Physical hydrogen adsorption is one of the most promising techniques; it uses porous adsorbents, which have material benefits such as low costs, high storage densities, and fast charging–discharging kinetics. During adsorption on material surfaces, hydrogen molecules weakly adsorb at the surface of adsorbents via long-range dispersion forces. The largest challenge in the hydrogen era is the development of progressive materials for efficient hydrogen storage. In designing efficient adsorbents, understanding interfacial interactions between hydrogen molecules and porous material surfaces is important. In this review, we briefly summarize a hydrogen storage technique based on US DOE classifications and examine hydrogen storage targets for feasible commercialization. We also address recent trends in the development of hydrogen storage materials. Lastly, we propose spillover mechanisms for efficient hydrogen storage using solid-state adsorbents.

Palladium clusters, free and supported on surfaces, and their applications in hydrogen storage

Palladium is a late transition metal element in the 4d row of the periodic table. Palladium nanoparticles show efficient catalytic activity and selectivity in a number of chemical reactions. In this paper, we review the structural and electronic properties of palladium nanoclusters, both isolated and deposited on the surface of different substrates. Careful experiments and extensive calculations have been performed for small Pd clusters which provide ample information on their properties. Work on large Pd clusters is less abundant and more difficult to perform and interpret. Cluster deposition is a method to modify material surfaces for different applications, and we report the known results for the deposition of Pd clusters on the surfaces of a number of interesting substrates: carbonaceous substrates like graphene and some layered novel materials related to graphene, metal oxide substrates, silicon and silicon-related substrates and metallic alloy substrates. Emphasis is placed on revealing how the structural, electronic and magnetic properties change when the clusters are deposited on the substrate surfaces. Some examples of chemical reactions catalyzed by supported Pd clusters and nanoparticles are reported. An issue discussed in detail is the influence of Pd on the storage of hydrogen in porous materials. Experimental work shows that the amount of stored hydrogen increases when the absorbing material is doped with Pd atoms, clusters and nanoparticles, and a spillover mechanism from the metal particle to the substrate is usually accepted as the explanation. To shed light on this issue, a critical analysis based on density functional simulations of the mechanisms of hydrogen spillover in perfect and defective graphene doped with palladium clusters is presented.

Synthesis and Characterization of Novel Hybrid Flocculants Based on Potato Starch Copolymers with Hollow Carbon Spheres

Novel carbon nanofiller-based starch-g-polyacrylamide hybrid flocculation materials (St-PAM-CS) were in situ prepared using potato starch (St), acrylamide (AM), and hollow mesoporous carbon spheres (CSs; diameters of 300–400 nm). Structures of different St-PAM-CS systems were characterized by Fourier transform infrared (FTIR) spectroscopy, X-Ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), laser scanning microscopy (LSM), and particle size analysis. The flocculation tests were evaluated by removing high turbidity kaolin suspension—initial absorbance 1.84. The effect of the St to AM molar ratio, doses, and content of CSs in hybrids on flocculation efficiency were examined. Satisfactory flocculation efficiency was obtained for all hybrids with 1 wt.% of the CS component. The highest reduction of the kaolin suspension absorbance (to 0.06) was observed for a 3 mL dose of the starch hybrid with the highest AM content. Additionally, St-PAM-CS showed a reduction in the sludge volume in time. The hybrids reached better flocculation efficiency in relation to the reference systems without CSs. The proposed flocculation mechanism (considering bridging, patching, and formation of hydrogen bonds) has been confirmed by the recorded results.

Photocatalytic Hydrogen Evolution via Water Splitting: A Short Review

Photocatalytic H2 generation via water splitting is increasingly gaining attention as a viable alternative for improving the performance of H2 production for solar energy conversion. Many methods were developed to enhance photocatalyst efficiency, primarily by modifying its morphology, crystallization, and electrical properties. Here, we summarize recent achievements in the synthesis and application of various photocatalysts. The rational design of novel photocatalysts was achieved using various strategies, and the applications of novel materials for H2 production are displayed herein. Meanwhile, the challenges and prospects for the future development of H2-producing photocatalysts are also summarized.

Advances in Pd Nanoparticle Size Decoration of Mesoporous Carbon Spheres for Energy Application

Pd nanoparticles with different sizes and diameter distributions were successfully deposited on the surface of disordered mesoporous carbon spheres (DMHCS). The size and diameter distribution of the Pd particles were controlled by the application of different experimental conditions. Two methods of synthesis (reflux and impregnation) and two Pd precursors (palladium (II) acetyloacetonate (Pd(acac) 2) and palladium (II) acetate (Pd(OAc)2)) were investigated and compared for the preparation of Pd-decorated DMHCS. The hydrogen storage properties of the pristine DMHCS and Pd-modified DMHCS at 40 °C and a pressure range of 0-45 bar were studied. The results showed that Pd-supported carbon samples synthesized in the presence of Pd(OAc)2 exhibited enhanced hydrogen storage capacity in respect to the pristine DMHCS. The maximum hydrogen storage of 0.38 wt.% exhibited the sample with the Pd nanoparticle diameter distribution of 2-14 nm and the average Pd crystallite size of 7.6 nm. It was found that the Pd nanoparticle content, size, and diameter distribution have a noticeable influence on H2 storage capacity.

H-Spillover through the Catalyst Saturation: An Ab Initio Thermodynamics Study

The spillover phenomenon, which essentially involves transfer of H from a metal catalyst to a graphitic receptor, has been considered promising for efficient hydrogen storage. An open question about the spillover mechanism is how a H atom binds to graphene instead of forming the thermodynamically preferred H(2). Using ab initio calculations, we show that the catalyst saturation provides a way to the adsorption of hydrogen on the receptor by increasing the H chemical potential to a spillover favorable range. Although it is energetically unfavorable for the spillover to occur on a pristine graphene surface, presence of a phase of hydrogenated graphene facilitates the spillover by significantly improving the C-H binding. We show that thermodynamic spillover can occur, both from the free-standing and from the receptor-supported clusters. Further, the computed energy barrier of the motion of a H from the catalyst to the hydrogenated graphene is small (0.7 eV) and can be overcome at operational temperatures.