Wormlike micelles in poly(oxyethylene) surfactant solution: Growth control through hydrophilic-group size variation

Oil-Tolerant Nonionic Worm-like Micellar Solution

The goal of this work is to study the effect of crude oil on worm-like micelles and identify any oil-tolerant systems. A new class of nonionic surfactants was synthesized that forms viscous worm-like micelles under a wide range of temperature and salinity conditions. Aqueous stability, rheology, cryogenic transmission electron microscopy imaging, and dynamic-light-scattering measurements were performed to understand properties, shape, and size of the micelles formed using these surfactants under different temperatures and salinity conditions and in the presence of hydrocarbons. These micellar solutions maintained high viscosity in the presence of small amounts (up to 8 vol %) of crude oils and pure hydrocarbons. Similar experiments were performed with conventional surfactant systems that were known to form worm-like micelles; they did not show oil tolerance. Larger alkanes and viscous crude oils affect the viscosity and transformation of cylindrical micelles less. These new surfactants are useful for oil and gas operations such as hydraulic fracturing, conformance control, and mobility control as they form viscous worm-like micelles in the presence of small amounts of crude oils.

Demonstration of a Novel Charge-Free Reverse Wormlike Micelle System

We demonstrate a novel charge-free reverse wormlike micelle (RWLM) consisting of a ternary mixture of a nonionic amphiphilic block copolymer, fatty acid alkyl ester oil, and water under ambient conditions. Nonionic amphiphile tetra-[poly(oxyethylene)-poly(oxybutylene)]pentaerythrityl ether (TEBPE) self-assembled into spheroid-type micelles in nonaqueous media isopropyl myristate (IPM) with viscosity comparable to that of IPM. The addition of water increases viscosity only slightly up to a certain concentration of water and then drastically, demonstrating the sphere-to-wormlike micelle transition as confirmed by small-angle X-ray scattering. Further increase in water decreases the viscosity after attaining a maximum value. The zero shear viscosity (η₀) of the 10 wt % TEBPE/IPM system reached the maximum at 2.6 wt % water and ca. 56 Pa·s, which is ∼fivefold higher than that of water. Dynamic rheological measurements on the highly viscous solutions confirmed the viscoelastic behavior and could be described by the Maxwell model. Conductivity, measured in the presence of a conductive probe, 1-ethyl-3-methylimidazolium tetrafluoroborate, was found to be higher for viscous samples compared to the nonviscous samples, suggesting the static percolation caused by the RWLM formation. Decrease in η₀ and conductivity beyond a maximum suggests the shortening of reverse micelles. A similar behavior has been observed in other fatty acid alkyl ester oils of different alkyl chain lengths. Note that most of the RWLM systems previously reported are based on phosphatidylcholine (PC). Formulation and structure-properties related to non-PC-based RWLMs have been rarely explored. Non-PC-based RWLMs using chemically stable and low-cost synthetic molecules can be applied not only in pharmaceuticals and cosmetics but also in a wide range of applications including drag reduction agents for nonaqueous fluids and as a template for nanomaterial synthesis.

Nanoprecipitation of polymeric nanoparticle micelles based on 2-methacryloyloxyethyl phosphorylcholine (MPC) with 2-(diisopropylamino)ethyl methacrylate (DPA), for intracellular delivery applications

Biodistribution of nanoparticle-based intracellular delivery systems is mediated primarily by particle size and physicochemical properties. As such, overcoming the rapid removal of these by the reticuloendothelial system remains a significant challenge. To date, a number of copolymer nanoparticle systems based on 2-methacryloyloxyethyl phosphorylcholine (MPC) with 2-(diisopropylamino)ethyl methacrylate (DPA), displaying biomimetic and pH responsive properties, have been published, however these have been predominately polymersome based, whilst micelle systems have remained relatively unexplored. This study utilised nanoprecipitation to investigate the effects of solvent and buffer choice upon micelle size and polydispersity, and found using methanol produced monodisperse micelles of circa 70 nm diameter, whilst ethanol produced polydisperse systems with nanoparticles of circa 128 nm diameter. The choice of aqueous buffer, dialysis of the systems, extended storage, and exposure to a wide temperature range (5-70 °C) had no significant effect on micelle size, and the systems were highly resistant to dilution, indicating excellent colloidal stability. Optimisation of the nanoprecipitation process, post precipitation, was investigated, and model drugs successfully loaded whilst maintaining system stability. Subsequent in vitro studies suggested that the micelles were of negligible cellular toxicity, and an apparent cellular uptake was observed via confocal laser scanning microscopy. This paper presents the first report of an optimised nanoprecipitation methodology for the formation of MPC-DPA nanoparticle micelles, and in doing so achieved monodisperse systems with the size and physicochemical characteristics seen as desirable for long circulating therapeutic delivery vehicles.

Wormlike micelles formed using Gemini surfactants with quaternary hydroxyethyl methylammonium headgroups

The aggregation behavior of Gemini surfactants with hydroxyl groups in their headgroups, butane-1,4-bis(hydroxyethyl methylalkylammonium) bromides hereafter abbreviated as m-4-m MEA (m = 12, 14, 16), has been investigated in aqueous solution. Each formed a viscous fluid in water at low concentration in the absence of a salt. In solutions of 14-4-14 MEA, the formation of highly viscoelastic wormlike micelles could be detected using steady and dynamic rheological measurements. The existence of these long column micelles has also been confirmed using cryo-transmission electron microscopy (cryo-TEM) and small angle X-ray scattering (SAXS). Compared with conventional bis(dimethylalkylammonium) bromide Gemini molecules with the same spacer (14-4-14), 14-4-14 MEA demonstrated a better ability to fabricate wormlike micelles because of the change in the headgroup structure. As for 16-4-16 MEA, which has longer alkyl chains, its aqueous solutions behave more like elastic gels at a concentration of 80 mmol L(−1). The unique viscoelastic behavior of m-4-m MEA in water can be attributed to the synergistic interactions of hydrophobic attraction and hydrogen bonding. The obtained results are believed to be an important addition to the effect that the headgroups of Gemini surfactants have on their aggregation behavior in dilute solutions.

Solubilization of oils or addition of monoglycerides drives the formation of wormlike micelles with an elliptical cross-section in cholesterol-based surfactants: a study by rheology, SANS, and cryo-TEM

We report the formation of wormlike micelles (WLM) in poly(oxyethylene) cholesteryl ether (ChEO(10)) aqueous solutions by the addition of lipophilic monoglycerides at room temperature (monolaurin (ML), monocaprin (MC), and monocaprylin (MCL)) bearing 12-, 10-, and 8-carbon alkyl chains, respectively. A combination of rheology, small-angle neutron scattering (SANS), and cryo-TEM was used to study their viscoelastic properties and structure. With the successive addition of cosurfactant, a significant increase in viscosity and a clear solidlike behavior is obtained, suggesting the formation of a viscoelastic network of wormlike micelles. Only for MCL is typical Maxwellian behavior obtained. The onset of micellar growth, as detected by the occurrence of solidlike behavior and a significant increase in viscosity, is obtained for 0.30 (1 wt%), 0.34 (1 wt%), and 0.60 (1.5 wt%) cosurfactant/ChEO(10) molar ratios with ML, MC, and MCL, respectively. With ML and MC, extremely long relaxation times (exceeding 20 s) compared to those of MCL are obtained, and zero-shear viscosity values are more than 1 order of magnitude higher than with MCL. These results show that cosurfactants with longer alkyl chain lengths (ML and MC) induce the formation of longer wormlike micelles and do so at lower concentrations. SANS measurements on dilute solutions confirm that the viscoelastic behavior correlates with an increase in contour length and reveals an elliptical cross-section with an axial ratio of around 2. Cryo-TEM images provide visual evidence of the wormlike micelles and confirm the elliptical shape of the cross-section. The addition of small amounts of aliphatic oils (ethyl butyrate, EB, and ethyl caprylate, EC) and cyclic oils (peppermint, PP, and tea tree, TT, oils) to ChEO(10) solutions induces wormlike micelle formation at a lower cosurfactant concentration or even in its absence (for PP, TT, and EC) because of their probable localization in the palisade layer. The viscosity peak and height of the plateau modulus occur at increasing monoglyceride concentration following the order PP ≈ TT > EC > EB > no oil.

Determination of an ion exchange constant by the use of a kinetic probe: a new semiempirical kinetic approach involving the effects of 3-F- and 4-F-substituted benzoates on the rate of piperidinolysis of anionic phenyl salicylate in aqueous cationic micelles

Pseudo-first-order rate constants (k(obs)) for the nucleophilic substitution reaction of piperidine (Pip) with ionized phenyl salicylate (PS(-)), obtained at a constant [Pip](T) (= 0.1 M), [PS(-)](T) (= 2 x 10(-4) M), [CTABr](T) (cetyltrimethylammonium bromide), < or = 0.06 M NaOH, and a varying concentration of MX (= 3-FC(6)H(4)CO(2)Na, 3-FBzNa and 4-FC(6)H(4)CO(2)Na, 4-FBzNa), follow the kinetic relationship k(obs) = (k(0) + thetaK(X/S)[MX])/(1 + K(X/S)[MX]) which is derived by the use of the pseudophase micellar (PM) model coupled with an empirical equation. The empirical equation explains the effects of [MX] on CTABr micellar binding constant (K(S)) of PS(-) that occur through X(-)/PS(-) ion exchange. Empirical constants theta and K(X/S) give the parameters F(X/S) and K(X/S), respectively. The magnitude of F(X/S) gives the measure of the fraction of micellized PS(-) transferred to the aqueous phase by the limiting concentration of X(-) through X(-)/PS(-) ion exchange. The values of F(X/S) and K(X/S) have been used to determine the usual thermodynamic ion exchange constant (K(X)(Y)) for ion exchange process X(-)/Y(-) on the CTABr micellar surface. The values of K(X)(Br) (where Br = Y) have been calculated for X = 3-FBzNa and 4-FBzNa. The mean values of K(X)(Br) are 12.8 +/- 0.9 and 13.4 +/- 0.6 for X(-) = 3-FBz(-) and 4-FBz(-), respectively. Nearly 3-fold-larger values of K(X)(Br) for X = 3-FBz(-) and 4-FBz(-) than those for X = Bz(-), 2-ClBz(-), 2-CH(3)Bz(-), and the 2,6-dichlorobenzoate ion (2,6-Cl(2)Bz(-)) are attributed to the presence of wormlike micelles in the presence of > 50 mM 3-FBz(-) and 4-FBz(-) in the [CTABr](T) range of 5-15 mM. Rheological properties such as shear thinning behavior of plots of shear viscosity versus the shear rate at a constant [3-FBz(-)] or [4-FBz(-)] as well as shear viscosity (at a constant shear rate) maxima as a function of the concentrations of 3-FBz(-) and 4-FBz(-) support the conclusion, derived from the values of K(X)(Br), for the probable presence of wormlike/viscoelastic micellar solutions under the conditions of the present study.