Rheological investigation of thermal transitions in vesicular dispersion

A scalable route to quaternary ammonium-functionalized AgCl colloidal antimicrobials inhibiting food pathogenic bacteria and biofilms

This study explores how a simple argentometric titration-like approach could be evolved into a versatile, scalable, fast, and robust strategy for the production of AgCl/quaternary ammonium compounds (QACs) colloidal nanoantimicrobials (NAMs). These systems, which are green, stable, cost-effective, and reproducible are found to be effective against a wide range of food pathogenic bacteria and biofilms. The option of a large-scale production for such colloidal suspensions was explored via the use of a peristaltic pump. The utilization of various types of biosafe QACs and a wide range of solvents including aqueous and organic ones renders this system green and versatile. Nanocolloids (NCs) were characterized using UV-Vis, X-ray photoelectron and Fourier transform infrared (FTIR) spectroscopies. Their morphology and crystalline nature were investigated by transmission electron microscopy (TEM) and selected area diffraction pattern (SAED). Nanoparticle (NP) size distribution and hydrodynamic radius were measured by dynamic light scattering (DLS), while the ζ-potential was found to be highly positive, thus indicating significant colloidal stability and antimicrobial activity. In fact, the higher the NP surface charge, the stronger was their bioactivity. Furthermore, the antibacterial and antibiofilm effects of the as-prepared NCs were tested against Gram-positive bacteria, such as Staphylococcus aureus (ATCC 29213) and Listeria monocytogenes 46, and Gram-negative bacteria, such as Escherichia coli (ATCC 25922) and Pseudomonas aeruginosa (ATCC 27853). The results clearly indicate that AgCl/QACs provide pronounced antibiofilm activity with long-term bacteriostatic effects against foodborne pathogenic bacteria rendering them an ideal choice for active food packaging systems.

Effect of salts on size and morphology of extruded dimethyldioctadecylammonium bromide or chloride vesicle for polymeric nanocapsules synthesis via templating emulsion polymerization

In preparing polymer capsules by vesicle templated emulsion polymerization, the initial size and morphology of the biomimetic vesicle template dictate the final size and morphology of the capsules. The presence of salts (NaCl, NaBr and LiCl) influences the size, dispersity (PDI) and morphology of dimethyldioctadecylammonium bromide or chloride (DODAX, X  = Br^- or Cl^-) vesicles, prepared via membrane extrusion. DODAX vesicles in pure water exhibit broad size distributions with PDI of 0.5 and 0.3 for DODAB and DODAC, respectively. Addition of salts in water before (pre-addition) and after (post-addition) extrusion reduces the size and PDI of the vesicles significantly and results in various morphology investigated with cryo-TEM. It is observed that at low salt concentration (≤0.5 mM) in pre-addition, DODAX exists as a nice quasi spherical unilamellar vesicle, suitable for vesicle templated polymerization whereas in post-addition of salt at any concentration, the morphology is dominated by structures not suitable for templating application. The information obtained here is crucial for vesicle templated emulsion polymerization and it will be shown that there is a relationship between vesicle template morphology and final polymer capsule morphology.

A Roadmap towards Successful Nanocapsule Synthesis via Vesicle Templated RAFT-Based Emulsion Polymerization

Vesicle templated emulsion polymerization is a special form of emulsion polymerization where the polymer is grown from the outside of the vesicle, leading to nanocapsules. Cost effective nanocapsules synthesis is in high demand due to phasing out of older methods for capsule synthesis. Although the first indications of this route being successful were published some 10 years ago, until now a thorough understanding of the parameters controlling the morphologies resulting from the template emulsion polymerization was lacking. Most often a mixture of different morphologies was obtained, ranging from solid particles to pro-trusion structures to nanocapsules. A high yield of nanocapsules was not achieved until now. In this paper, the influence of initial vesicle dispersion, choice of the Reversible Addition-Fragmentation chain Transfer (RAFT) species and oligomer, monomer and crosslinker have been investigated. It turns out that good initial vesicle dispersion, molecular control of the RAFT process, a not too hydrophobic monomer and some crosslinking is needed to result in high yield of nanocapsules. In previous work, the level of RAFT control was often suboptimal and not properly verified and although nanocapsules were shown, other morphologies were also present. We now believe we have a full understanding of vesicle templated nanocapsules synthesis, relevant to many applications.

The effect of an oligonucleotide on the structure of cationic DODAB vesicles

The effect of a small single-stranded oligonucleotide (ODN) on the structure of cationic DODAB vesicles was investigated by means of differential scanning calorimetry (DSC), small angle X-ray scattering (SAXS) and electron spin resonance (ESR) spectroscopy. ODN adsorption induced coalescence of vesicles and formation of multilamellar structures with close contact between lamellae. It also increased the phase transition temperature by 10 °C but decreased transition cooperativity. The ODN rigidified and stabilized the gel phase. In the fluid phase, a simultaneous decrease of ordering close to the bilayer surface and increase in bilayer core rigidity was observed in the presence of the ODN. These effects may be due not only to electrostatic shielding of DODAB head groups but also to superficial dehydration of the bilayers. The data suggest that oligonucleotides may induce the formation of a multilamellar poorly hydrated coagel-like phase below phase transition. These effects should be taken into account when planning ODN delivery employing cationic bilayer carriers.

Thermal and structural behavior of dioctadecyldimethylammonium bromide dispersions studied by differential scanning calorimetry and X-ray scattering

Dioctadecyldimethylammonium bromide (DODAB) is a double chain cationic lipid, which assembles as bilayer structures in aqueous solution. The precise structures formed depend on, e.g., lipid concentration and temperature. We here combine differential scanning calorimetry (DSC) and X-ray scattering (SAXS and WAXS) to investigate the thermal and structural behavior of up to 120 mM DODAB in water within the temperature range 1–70°C. Below 1 mM, this system is dominated by unilamellar vesicles (ULVs). Between 1 and 65 mM, ULVs and multilamellar structures (MLSs) co-exist, while above 65 mM, the MLSs are the preferred structure. Depending on temperature, DSC and X-ray data show that the vesicles can be either in the subgel (SG), gel, or liquid crystalline (LC) state, while the MLSs (with lattice distance d  = 36.7 Å) consist of interdigitated lamellae in the SG state, and ULVs in the LC state (no Bragg peak). Critical temperatures related to the thermal transitions of these bilayer structures obtained in the heating and cooling modes are reported, together with the corresponding transition enthalpies.

Aggregation behavior of aqueous dioctadecyldimethylammonium bromide/monoolein mixtures: a multitechnique investigation on the influence of composition and temperature

A recently described non-viral gene delivery system [dioctadecyldimethylammonium bromide (DODAB)/monoolein (MO)] has been studied in detail to improve knowledge on the interactions between lamellar (DODAB) and non-lamellar-forming (MO) lipids, as a means to enhance their final cell transfection efficiency. Indeed, the morphology, fluidity, and size of these cationic surfactant/neutral lipid mixtures play an important role in the ability of these systems to complex nucleic acids. The different techniques used in this work, namely dynamic light scattering (DLS), fluorescence spectroscopy, differential scanning calorimetry (DSC), cryogenic transmission electron microscopy (cryo-TEM), light microscopy (LM), and surface pressure-area isotherms, allowed fully characterization of the phase behavior and aggregate morphology of DODAB/MO mixtures at different molar ratios. Overall, the results indicate that the final morphology of DODAB/MO aggregates depends on the balance between the tendency of DODAB to form zero-curvature bilayer structures and the propensity of MO to form non-bilayer structures with negative curvature. These results also show that in the MO-rich region, an increase in temperature has a similar effect on aggregate morphology as an increase in MO concentration.

Hydrostatic pressure reveals bilayer phase behavior of dioctadecyldimethylammonium bromide and chloride

Bilayer phase transitions of dioctadecyldimethylammonium bromide (2C(18)Br) and chloride (2C(18)Cl) were observed by differential scanning calorimetry and high-pressure light-transmittance measurements. The 2C(18)Br bilayer membrane showed different kinds of transitions depending on preparation methods of samples under atmospheric pressure. Under certain conditions, the 2C(18)Br bilayer underwent three kinds of transitions, the metastable transition from the metastable lamellar crystal (L(c(2))) phase to the metastable lamellar gel (L(β)) phase at 35.4 °C, the metastable main transition from the metastable L(β) phase to the metastable liquid crystalline (L(α)) phase at 44.5 °C, and the stable transition from the stable lamellar crystal (L(c(1))) phase to the stable L(α) phase at 52.8 °C. On the contrary, the 2C(18)Cl bilayer underwent two kinds of transitions, the stable transition from the stable L(c) phase to the stable L(β) phase at 19.7 °C and the stable main transition from the stable L(β) phase to the stable L(α) phase at 39.9 °C. The temperatures of the phase transitions of the 2C(18)Br and 2C(18)Cl bilayers were almost linearly elevated by applying pressure. It was found from the temperature (T)-pressure (p) phase diagram of the 2C(18)Br bilayer that the T-p curves for the main transition and the L(c(1))/L(α) transition intersect at ca. 130 MPa because of the larger slope of the former transition curve. On the other hand, the T-p phase diagram of the 2C(18)Cl bilayer took a simple shape. The thermodynamic properties for the main transition of the 2C(18)Br and 2C(18)Cl bilayers were comparable to each other, whereas those for the L(c(1))/L(α) transition of the 2C(18)Br bilayer showed considerably high values, signifying that the L(c(1)) phase of the 2C(18)Br bilayer is extremely stable. These differences observed in both bilayers are attributable to the difference in interaction between a surfactant and its counterion.

Interaction between Pluronic F127 and dioctadecyldimethylammonium bromide (DODAB) vesicles studied by differential scanning calorimetry

A number of fundamental studies on the interactions between lipid bilayers and (ethylene oxide)-b-(propylene oxide)-b-(ethylene oxide) copolymers (PEO-PPO-PEO, Pluronics) have been carried out recently as model systems for the complex behavior of cell membranes with this class of polymers often employed in pharmaceutical formulations. We report here a study by differential scanning calorimetry (DSC) of the interactions in water between Pluronic F127 (F127), and the cationic vesicles of di-n-octadecyldimethylammonium bromide (DODAB), as a function of concentration of the two components (DODAB 0.1 and 1.0 mM; F127 0.1 to 5.0 mM) and of the sample preparation protocol. The DSC studies follow the critical micellization temperature (cmt ≈ 27 °C at 1.0 mM) of F127 and the gel-liquid crystal transition (T(m) ≈ 45 °C) of the DODAB bilayer and of F127/DODAB mixtures. Upon heating past T(m), vesicle/polymer mixtures undergo an irreversible conversion into mixed DODAB/F127 micelles and/or F127-bearing vesicles, depending on the relative amount of each component, together with, in some cases, residual intact F127 micelles or DODAB vesicles. Sample preparation protocol is shown to have little impact on the composition of mixed systems once they are heated above T(m).

Molecular structure of the dioctadecyldimethylammonium bromide (DODAB) bilayer

Dioctadecyldimethylammonium bromide (DODAB) is a double-chained quaternary ammonium surfactant that assembles in water into bilayer structures. This letter reports the molecular dynamics (MD) computer simulations of the DODAB bilayer at 25 °C. The simulations show that the surfactant membrane arranges spontaneously into the rippled phase (P(β)(')) at that temperature. The ordering within the chain fragment closest to the hydrophilic head (carbon atoms 1-5) is relatively low. It grows significantly for the carbon atoms located in the center of the membrane (atoms 6-17). The C6-C17 chain fragments are well aligned and tilted by ca. 15° with respect to the bilayer normal.