Fabrication of oriented poly-l-lysine/bacteriorhodopsin-embedded purple membrane multilayer structure for enhanced photoelectric response

Protein-based polyelectrolyte multilayers

The immobilization of proteins to impart specific functions to surfaces is topical for chemical engineering, healthcare and diagnosis. Layer-by-Layer (LbL) self-assembly is one of the most used method to immobilize macromolecules on surfaces. It consists in the alternate adsorption of oppositely charged species, resulting in the formation of a multilayer. This method in principle allows any charged object to be immobilized on any surface, from aqueous solutions. However, when it comes to proteins, the promises of versatility, simplicity and universality that the LbL approach holds are unmet due to the heterogeneity of protein properties. In this review, the literature is analyzed to make a generic approach emerge, with a view to facilitate the LbL assembly of proteins with polyelectrolytes (PEs). In particular, this review aims at guiding the choice of the PE and the building conditions that lead to the successful growth of protein-based multilayered self-assemblies.

Nanohybrid Structures Based on Plasmonic or Fluorescent Nanoparticles and Retinal-Containing Proteins

Rhodopsins are light-sensitive membrane proteins enabling transmembrane charge separation (proton pump) on absorption of a light quantum. Bacteriorhodopsin (BR) is a transmembrane protein from halophilic bacteria that belongs to the rhodopsin family. Potential applications of BR are considered so promising that the number of studies devoted to the use of BR itself, its mutant variants, as well as hybrid materials containing BR in various areas grows steadily. Formation of hybrid structures combining BR with nanoparticles is an essential step in promotion of BR-based devices. However, rapid progress, continuous emergence of new data, as well as challenges of analyzing the entire data require regular reviews of the achievements in this area. This review is devoted to the issues of formation of materials based on hybrids of BR with fluorescent semiconductor nanocrystals (quantum dots) and with noble metal (silver, gold) plasmonic nanoparticles. Recent data on formation of thin (mono-) and thick (multi-) layers from materials containing BR and BR/nanoparticle hybrids are presented.

Controllable stationary photocurrents generated from a bacteriorhodopsin/upconversion nanoparticle-based bionanosystem under NIR illumination

In the past few decades, tremendous effort has been dedicated to develop bacteriorhodopsin (bR)-based photo-electronic devices for generating a stationary photocurrent and further for use as a component of artificial retinas in constant illumination sensing. However, an IR-triggered stationary photocurrent with controllable amplitudes has never been realized to date. Herein, NaYF₄:Yb,Er and NaYF₄:Yb,Tm upconversion nanoparticles (UCNPs) with green and blue emissions, respectively, were synthesized and further incorporated with bR to build a bionanosystem. Under 980 nm NIR irradiation the UCNPs function as internal green and blue light sources to initiate the photocycle and speed up the transition of bR from M₄₁₀ to the ground state, consequently accelerating the bR photocycle for the generation of a stationary photocurrent. Moreover, the photocurrent profile could be tailored by changing the blue/green emission intensity ratio. The mechanism is analysed to explore the scientific insights. The system consisting of controllable blue and green light sources may not only hold great promise to construct new types of bR-based optical devices, but also offers a useful setup to investigate the fundamental science underlying the bR photoresponse.

Integration of bacteriorhodopsin with upconversion nanoparticles for NIR-triggered photoelectrical response

Transient spikes from bacteriorhodopsin (bR) are triggered with NIR irradiation for the first time by integrating bR with upconversion nanoparticles.

Templated globules--applications and perspectives

Polyelectrolyte capsules represent a class of particles composed of an internal core and an external polymer matrix shell. In recent years, it has become clear that the manufacture of polyelectrolyte capsule is likely to have a significant role in several areas including medicine and biology. Many distinct methodologies for the fabrications of templated globules have been reported. Despite the huge availability of knowledge used to obtain such globules, the choice of the appropriate technology for the desired applications demands a deeper appreciation of this issue. Furthermore, the extent to which the applications of polyelectrolyte capsule may be actively involved in the practical biomedical field is still a fascinating challenge. Here, we review the recipes for the globule assembly with their own benefits and limitations and how different templates could affect the final globule features, with a particular focus on the Layer by Layer (LbL) procedure. The latest applications in biological, therapeutical and diagnostic areas are also discussed and some outlooks for the strategic development of polymer globule are highlighted.

Deposition of bacteriorhodopsin protein in a purple membrane form on nitrocellulose membranes for enhanced photoelectric response

Bacteriorhodopsin protein (bR)-based systems are one of the simplest known biological energy converters. The robust chemical, thermal and electrochemical properties of bR have made it an attractive material for photoelectric devices. This study demonstrates the photoelectric response of a dry bR layer deposited on a nitrocellulose membrane with indium tin oxide (ITO) electrodes. Light-induced electrical current as well as potential and impedance changes of dried bR film were recorded as the function of illumination. We have also tested bR in solution and found that the electrical properties are strongly dependent on light intensity changing locally proton concentration and thus pH of the solution. Experimental data support the assumption that bR protein on a positively charged nitrocellulose membrane (PNM) can be used as highly sensitive photo- and pH detector. Here the bR layer facilitates proton translocation and acts as an ultrafast optoelectric signal transducer. It is therefore useful in applications related to bioelectronics, biosensors, bio-optics devices and current carrying junction devices.

Thin films and assemblies of photosensitive membrane proteins and colloidal nanocrystals for engineering of hybrid materials with advanced properties

The development and study of nano-bio hybrid materials engineered from membrane proteins (the key functional elements of various biomembranes) and nanoheterostructures (inorganic colloidal nanoparticles, transparent electrodes, and films) is a rapidly growing field at the interface of materials and life sciences. The mainspring of the development of bioinspired materials and devices is the fact that biological evolution has solved many problems similar to those that humans are attempting to solve in the field of light-harvesting and energy-transferring inorganic compounds. Along this way, bioelectronics and biophotonics have shown considerable promise. A number of proteins have been explored in terms of bioelectronic device applications, but bacteriorhodopsin (bR, a photosensitive membrane protein from purple membranes of the bacterium Halobacterium salinarum) and bacterial photosynthetic reaction centres have received the most attention. The energy harvesting in plants has a maximum efficiency of 5%, whereas bR, in the absence of a specific light-harvesting system, allows bacteria to utilize only 0.1-0.5% of the solar light. Recent nano-bioengineering approaches employing colloidal semiconductor and metal nanoparticles conjugated with biosystems permit the enhancement of the light-harvesting capacity of photosensitive proteins, thus providing a strong impetus to protein-based device optimisation. Fabrication of ultrathin and highly oriented films from biological membranes and photosensitive proteins is the key task for prospective bioelectronic and biophotonic applications. In this review, the main advances in techniques of preparation of such films are analyzed. Comparison of the techniques for obtaining thin films leads to the conclusion that the homogeneity and orientation of biomembrane fragments or proteins in these films depend on the method of their fabrication and increase in the following order: electrophoretic sedimentation < Langmuir-Blodgett and Langmuir-Schaefer methods < self-assembly and layer-by-layer methods. The key advances in the techniques of preparation of the assemblies or complexes of colloidal nanocrystals with bR, purple membranes, or photosynthetic reaction centres are also reviewed. Approaches to the fabrication of the prototype photosensitive nano-bio hybrid materials with advanced photovoltaic, energy transfer, and optical switching properties and future prospects in this field are analyzed in the concluding part of the review.

Bidirectional mediation of TiO2 nanowires field effect transistor by dipole moment from purple membrane

Bacteriorhodopsin-embedded purple membrane (bR-PM) is one of the most promising biomaterials for various bioelectronics applications. In this work, we demonstrate that a dipole bio-originated from bR-PM can bidirectionally mediate the performance of a bottom-contact TiO(2) nanowire field effect transistor (FET) for performance improvement. When negative gate voltage is applied, both transfer and output characteristics of the TiO(2) nanowire FET are enhanced by the bR-PM modification, resulting in a hole mobility increased by a factor of 2. The effect of the number of the deposited bR-PM layers on the normalized DeltaI(D) of the FET suggests that the additional electric field generated by the dipole moment natively existing in bR-PM actually boosts the performance of the TiO(2) nanowires FET.