Facile patterning of upconversion NaYF4:Yb,Er nanoparticles

Calcination-free micropatterning of rare-earth-ion-doped nanoparticle films on wettability-patterned surfaces of plastic sheets

We demonstrate a patterning technique of rare-earth-ion-doped (RE) nanoparticle films directly on wettability-patterned surfaces fabricated on plastic sheets in one step. Self-assembled monolayers consisting of silane-coupling agent with hydrophobic groups were fabricated on plastic sheets. UV-ozone treatments were performed through a metal mask to selectively remove the self-assembled monolayers in a patterned manner, resulting in the formation of wettability-patterned surfaces on plastic sheets. Using a water dispersion of Er(3+) and Yb(3+)-codoped Y2O3 nanoparticles at a diameter of 100 nm, RE-nanoparticle films were fabricated on the wettability-patterned surfaces by a dip-coating technique. By adjusting the concentration of RE-nanoparticle dispersion, withdrawal speed, and withdrawal angle, amount of RE-nanoparticles, we were able to control the structures of the RE-nanoparticle films. Fluorescence microscope observations demonstrate that visible upconversion luminescence and near-infrared fluorescence were emitted from the RE-nanoparticle films on the wettability-patterned surfaces. This technique allows for the fabrication of flexible emitting devices with long-operating life time with minimized material consumption and few fabrication steps, and for the application to sensors, emitting devices, and displays in electronics, photonics, and bionics in the future.

3D assembly of upconverting NaYF4 nanocrystals by AFM nanoxerography: creation of anti-counterfeiting microtags

Formation of 3D close-packed assemblies of upconverting NaYF4 colloidal nanocrystals (NCs) on surfaces, by Atomic Force Microscopy (AFM) nanoxerography is presented. The surface potential of the charge patterns, the NC concentration, the polarizability of the NCs and the polarity of the dispersing solvent are identified as the key parameters controlling the assembly of NaYF4 NCs into micropatterns of the desired 3D architecture. This insight allowed us to fabricate micrometer sized Quick Response (QR) codes encoded in terms of upconversion luminescence intensity or color. Topographically hidden messages could also be readily incorporated within these microtags. This work demonstrates that AFM nanoxerography has enormous potential for generating high-security anti-counterfeiting microtags.

Micromolding in capillaries for calcination-free fabrication of flexible inorganic phosphor films consisting of rare-earth-ion-doped nanoparticles

We discuss the micromolding in capillaries technique for the direct fabrication of calcination-free rare earth ion-doped (RE) phosphor films consisting of RE nanoparticles on plastic sheets. We synthesized two types of RE nanoparticles consisting of Y2O3 matrix doped with Er and Yb ions. Green upconversion luminescence, red upconversion luminescence, and near-infrared fluorescence appeared from the RE nanoparticles under excitation of near-infrared light. Adjusting the channel width and depth of polydimethylsiloxane molds led to control of the density of nanoparticles in the patterned RE nanoparticle films. Adjusting concentration of the RE nanoparticle dispersion and size of the RE nanoparticles allowed for the control of the density of nanoparticles in the patterned RE nanoparticle films. The density of nanoparticles in the patterned RE films on plastic sheets increased with an increase in the number of injection and drying of the RE nanoparticle dispersion. These results demonstrate that this technique enables us to directly fabricate the patterned RE phosphor films on plastic sheets, leading to the fabrication of inorganic flexible devices with small fabrication steps and material consumptions.

Fabrication and characterization of rare-earth-doped nanostructures on surfaces

This article presents a simple and practical means to produce rare-earth-based nanostructures, as well as a combined characterization of structure and optical properties in situ. A nanosphere lithography strategy combined with surface chemistry enables the production of arrays of β-NaYF(4):Yb,Er nanorings inlaid in an octadecyltrichlorosilane matrix. These arrays of nanorings are produced over the entire support, such as a 1 cm(2) glass coverslip. The dimension of nanorings can be varied by changing the deposition conditions. A home-constructed, multifunctional microscope integrating atomic force microscopy, near-field scanning optical microscopy, and far-field optical microscopy and spectroscopy is utilized to characterize the nanostructures. This in situ and combined characterization is important for rare-earth-containing nanomaterials in order to correlate local structure with upconversion photoluminescence. Knowledge gained from the investigation should facilitate materials design and optimization, for instance, in the context of photovoltaic devices and biofluorescent probes.

Honeycomb-structured films by multifunctional amphiphilic biodegradable copolymers: surface morphology control and biomedical application as scaffolds for cell growth

Recently, fabrication of functional porous polymer films with patterned surface structures at the scale from nanometer to micrometer has been attracting increasing interests in material science and nanobiotechnology. In this work, we present new preparation of two series of multifunctional amphiphilic copolymers and preparation of their microporous thin films on solid substrates. First, diblock dendritic poly(l-lysine)-b-poly(l-lactide)s and triblock dendritic poly(l-lysine)-b-poly(l-lactide)-b-dendritic poly(l-lysine)s (C1-C6) were synthesized through 4-dimethylaminopyridine (DMAP)-catalyzed living ring-opening polymerization of (l-)-lactide with (l-)-lysine dendron initiators, and their structures were characterized by nuclear magnetic resonance spectrometer (NMR), gel permeation chromatography (GPC) and matrix-assisted laser desorption/ionization Fourier-transformed mass spectra (MALDI-FTMS). Employing the breath-figure (BF) fabrication strategy, thin films of the synthesized amphiphiles (C1-C6) were drop-cast, and their surface topologies were examined by scanning electron microscopy (SEM) and atomic force microscopy (AFM), and the effects of new amphiphile structure and drop-casting parameters of amphiphile concentration, humidity and temperature on self-assembly of ordered porous surface were studied. Furthermore, the influence of surface energy of drop-casting substrates was additionally investigated. With a human cervical epithelial carcinoma cell line (HeLa), cytotoxicity of the prepared honeycomb-structured films by new amphiphile C6 was evaluated by thiazoyl-blue-tetrazolium-bromide (MTT) assay, and HeLa cell growth behavior with microporous amphiphile films as the scaffolds was also examined. It was found that tunable micropore diameter sizes and well ordered surface topologies of BF films could be achieved for the new prepared amphiphiles, and utilization of the honeycomb-like microporous films as scaffolds indicated favorable enhancement in cell proliferation. Therefore, the honeycomb-structured films by these biocompatible multifunctional amphiphiles may provide new materials as 3D-scaffold materials for potential application in tissue engineering and regeneration.