Optimizing the formation of biocompatible gold nanorods for cancer research: Functionalization, stabilization and purification

Coating Gold Nanorods with Self-Assembling Peptide Amphiphiles Promotes Stability and Facilitates in vivo Two-Photon Imaging

Gold nanorods (GNRs) are versatile asymmetric nanoparticles with unique optical properties. These properties makes GNRs ideal agents for applications such as photothermal cancer therapy, biosensing, and in vivo imaging. However,...

Impact of Kapitza resistance on the stability and efficiency of photoacoustic conversion from gold nanorods

Plasmonic particles have been proposed for a broad variety of optical and hybrid applications, including the photothermal ablation and photoacoustic imaging of cancer, or their integration in photonic sensors. Here, we address the effect of thermal resistance at the gold-water interface, or Kapitza resistance, on the performance of photoacoustic conversion of gold nanorods. Our findings point to possible strategies for the optimization of plasmonic particles as contrast agents for imaging, or even as transducers for biosensing. We perform numerical simulations that project a simultaneous increase of efficiency and stability of photoacoustic conversion with a decrease of Kapitza resistance. We suggest an effective approach to modulate Kapitza resistance by including underresolved features as roughness or the presence of adsorbates. Inspired by this idea, we synthesize a rough variant of gold nanorods by the deposition and galvanic replacement of a silver shell, where roughness provides higher photoacoustic signals by about 70% and damage thresholds by 120%. In addition, we coat our particles with a protein corona and find a decrease of photoacoustic signals with shell thickness, which may inspire new solutions for biosensors based on a mechanism of photoacoustic transduction. Both our findings are consistent with an effective modulation of Kapitza resistance, which decreases upon roughening, due to an underlying increase of specific surface area, and increases upon coating with a protein shell that may act as a thermal insulation. We discuss possible directions to gain more advantage of our concept for topical applications at the crossroads of plasmonics, biomedical optics and biosensing.

Highly hydrophilic cationic gold nanorods stabilized by novel quaternary ammonium surfactant with negligible cytotoxicity

The photothermal cancer therapy using cationic gold nanorods (GNRs) stabilized by quaternary ammonium salts (QAS) have a great potential to enhance conventional cancer treatment as it promises the effective eradication of cancer cells including cells resistant to radio- and chemo-therapy and the stimulation of anti-tumor immune response. However, as the cytotoxicity of the conventional alkanethiol-QAS compounds limits their utility in medicine, here we developed GNRs modified by novel highly hydrophilic cationic surfactant composed of the quaternary ammonium group and ethylene glycol chain N,N,N-trimethyl-3,6,9,12,15-pentaoxaheptadecyl-17-sulfanyl-1-ammonium bromide (POSAB) showing insignificant cytotoxicity in the free state. Surface modification of GNRs by POSAB allowed to prepare nanoparticles with good stability in water, high cellular uptake and localization in lysosomes that are a promising alternative to alkanethiol-stabilized GNRs especially for biomedical applications.

In vivo comparison of the biodistribution and long-term fate of colloids – gold nanoprisms and nanorods – with minimum surface modification

Aim: To study the difference in biodistribution of gold nanoprisms (NPr) and nanorods (NR), PEGylated to ensure colloidal stability. Materials & methods: Surface changes were studied for nanoparticles in different media, while the biodistribution was quantified and imaged in vivo. Results: Upon interaction with the mouse serum, NR showed more abrupt changes in surface properties than NPr. In the in vivo tests, while NPr accumulated similarly in the spleen and liver, NR showed much higher gold presence in the spleen than in liver; together with some accumulation in kidneys, which was nonexistent in NPr. NPr were cleared from the tissues 2 months after administration, while NR were more persistent. Conclusion: The results suggest that the differential biodistribution is caused by size-/shape-dependent interactions with the serum.

In situ crystal growth of gold nanocrystals on upconversion nanoparticles for synergistic chemo-photothermal therapy

A multifunctional cancer therapy nanocomposite was proposed and synthesized by linking the pH-responsive SH-PEG-DOX prodrug onto gold nanocrystals that were grown in situ on the surface of upconversion nanoparticles (UCNPs). In the structure of the SH-PEG-DOX prodrug, a hydrazone bond was utilized for subsequent pH-responsive drug release in the intracellular acidic microenvironment of cancer cells. This innovative assembly method is facile and mild, and can be used to obtain nanocomposites of UCNPs and gold, which show excellent photostability and biocompatibility. The final UCNPs@Au-DOX nanocomposites offer efficient treatment effects in vitro under irradiation with an 808 nm laser due to the synergistic effect of chemotherapy and photothermal therapy. In addition, the UCNPs@Au-DOX nanocomposites show excellent intracellular locating ability via upconversion luminescence (UCL) imaging with Er³⁺ ions and magnetic resonance imaging (MRI) with Gd³⁺ ions, indicating that they have potential as a visual tracking agent in cancer treatment. Therefore, the presented bioimaging-guided multifunctional synergistic therapy nanocomposites are promising tools for imaging-guided cancer therapy.

Dendronization-induced phase-transfer, stabilization and self-assembly of large colloidal Au nanoparticles

The phase-transfer of CTAB-coated aqueous, spherical gold nanoparticles, with metallic core diameters ranging from ca. 27 to 54 nm, into organic solvents by exchanging the primitive polar bilayer with lipophilic, disulfide dendritic ligands is reported. The presence of such a thick nonpolar organic shell around these large nanoparticles enhances their stabilization against aggregation, in addition to enabling their transfer into a variety of solvents such as chloroform, toluene or tetrahydrofuran. Upon the slow evaporation of a chloroform suspension deposited on a solid support, the dendronized hybrids were found to self-assemble into ring structures of various diameters. Moreover, their self-assembly at the liquid-air interface affords the formation of fairly long-range ordered monolayers, over large areas, that can then be entirely transferred onto solid substrates.

Multivalency of PEG-thiol ligands affects the stability of NIR-absorbing hollow gold nanospheres and gold nanorods

In this work the effect of multivalency on the stability of NIR-absorbing HAuNSs and AuNRs functionalized by mono-, bi- and tridentate polyethyleneglycol (PEG) thiol ligands is reported.

Quantitative characterization of the colloidal stability of metallic nanoparticles using UV-vis absorbance spectroscopy

Plasmonic nanoparticles are used in a wide variety of applications over a broad array of fields including medicine, energy, and environmental chemistry. The continued successful development of this material class requires the accurate characterization of nanoparticle stability for a variety of solution-based conditions. Although many characterization methods exists, there is an absence of a unified, quantitative means for assessing the colloidal stability of plasmonic nanoparticles. We present the particle instability parameter (PIP) as a robust, quantitative, and generalizable characterization technique based on UV-vis absorbance spectroscopy to characterize colloidal instability. We validate PIP performance with both traditional and alternative characterization methods by measuring gold nanorod instability in response to different salt (NaCl) concentrations. We further measure gold nanorod stability as a function of solution pH, salt, and buffer (type and concentration), nanoparticle concentration, and concentration of free surfactant. Finally, these results are contextualized within the literature on gold nanorod stability to establish a standardized methodology for colloidal instability assessment.

Tissue distribution and efficacy of gold nanorods coupled with laser induced photoplasmonic therapy in ehrlich carcinoma solid tumor model

Gold nanorods (GNR) within tumor microregions are characterized by their ability to absorb near IR light and emit heat in what is called photoplasmonic effect. Yet, the efficacy of nanoparticles is limited due to intratumoral tissue distribution reasons. In addition, distribution of GNRs to normal tissue might result in non specific toxicity. In the current study, we are assessing the intratumoral and tissue distribution of PEGylated GNRs on the top of its antitumor characteristics when given intravenously or intratumoral to solid tumor bearing mice and coupled with laser photoplasmonic sessions. PEGylated GNRs with a longitudinal size of less than 100 nm were prepared with aspect ratio of 4.6 showing strong surface plasmon absorption at wavelength 800 nm. Pharmacokinetics of GNR after single I.V. administration (0.1 mg/kg) showed very short systemic circulating time (less than 3 h). On the other hand, tissue distribution of I.V. GNR (0.1 mg/kg) to normal animals showed preferential deposition in spleen tissue. Repeated administration of I.V. GNR resulted in preferential accumulation in both liver and spleen tissues. In addition, I.V. administration of GNR to Ehrlich carcinoma tumor bearing mice resulted in similar tissue distribution; tumor accumulation and anti-tumor effect compared to intratumoral administration. In conclusion, the concentration of GNR achieved within tumors microregions after I.V. administration was comparable to I.T. administration and sufficient to elicit tumoral growth arrest when coupled with laser-aided photoplasmonic treatment.

Laser exposure of gold nanorods can increase neuronal cell outgrowth

The usage of gold nanoparticles (Au NPs) in biological applications has risen significantly over the last 10 years. With the wide variety of chemical and biological functionalization available and their distinctive optical properties, Au NPs are currently used in a range of biological applications including sensing, labeling, drug delivery, and imaging applications. Among the available particles, gold nanorods (Au NRs) are particularly useful because their optical absorption can be tuned across the visible to near infrared region. Here, we present a novel application of Au NRs associated with low power laser exposure of NG108-15 neuronal cells. When cells were irradiated with a 780 nm laser, the average number of neurons with neurites increased. A similar stimulatory effect was observed for cells that were cultured with poly-(4-styrenesulfonic acid)-coated and silica-coated Au NRs. Furthermore, when the NG108-15 cells were cultured with both bare and coated Au NRs and then irradiated with 1.2-7.5 W/cm(2) at 780 nm, they showed a neurite length increase of up to 25 µm versus control. To the best of our knowledge, this effect has never been reported before. While the pathways of the stimulation is not yet clear, the data presented here demonstrates that it is linked to the absorption of light by the Au NRs. These initial results open up new opportunities for peripheral nerve regeneration treatments and for novel approaches to addressing central nervous system axons following spinal cord injury.

Control of cell adhesion and neurite outgrowth by patterned gold nanoparticles with tunable attractive or repulsive surface properties

Guiding of neuronal cells on surfaces is required for the investigation of fundamental aspects of neurobiology, for tissue engineering, and for numerous bioelectronic applications. A modular method to establish nanostructured chemical templates for local deposition of gold nanoparticles is presented. A process comprising nanoimprint lithography, silanization, lift-off, and gold nanoparticle immobilization is used to fabricate the particle patterns. The chemical composition of the surface can be modified by in situ adsorption of cell-binding ligands to locally addressed particles. The versatility of this approach is demonstrated by inverting the binding affinity between rat cortical neurons and nanopatterned surfaces via wet-chemical means and thereby reversing the pattern of guided neurons.

Role of gold nanoparticles capping density on stability and surface reactivity to design drug delivery platforms

Five-nanometer sized gold nanoparticles (Au NPs) stabilized with citrate ions have been reacted with various amounts of dihydrolipoic acid (DHLA) (×28, ×56, ×140, ×222, relative to Au NPs). Ligand exchange between citrate and the dithiol resulted in DHLA-capped Au NPs, whose degree of inertia was found to be related to the density of capping. The results revealed the importance of DHLA coating density to enhance the colloidal stability and modulate the reactivity toward free radicals and proteins of biological relevance. Thus, Au NPs capped with the highest amount of DHLA were found to be the ones that were, first, the most resistant to environmental changes, then characterized by the lowest residual catalytic reactivity of their metallic core, and finally the lowest interacting with proteins through nonspecific adsorption. The physicochemical properties conferred to Au NPs prepared with the ×222 excess should be valuable for further pharmaceutical development of nanoparticle platforms.

Functional gold nanorods: synthesis, self-assembly, and sensing applications

Gold nanorods have received much attention due to their unique optical and electronic properties which are dependent on their shape, size, and aspect ratio. This article covers in detail the synthesis, functionalization, self-assembly, and sensing applications of gold nanorods. The synthesis of three major types of rods is discussed: single-crystalline and pentahedrally-twinned rods, which are synthesized by wet chemistry methods, and polycrystalline rods, which are synthesized by templated deposition. Functionalization of these rods is usually necessary for their applications, but can often be problematic due to their surfactant coating. Thus, general strategies are provided for the covalent and noncovalent functionalization of gold nanorods. The review will then examine the significant progress that has been made in controllable assembly of nanorods into various arrangements. This assembly can have a large effect on measurable properties of rods, making it particularly applicable towards sensing of a variety of analytes. Other types of sensing not dependent on nanorod assembly, such as refractive-index based sensing, are also discussed.

Preparation of Super-Stable Gold Nanorods via Encapsulation into Block Copolymer Micelles

Gold nanorods (GNRs) have the potential to be used as imaging and hyperthermia agents for cancer theranostics. Clinical applications of as-synthesized GNRs (i.e., cetyl trimethylammonium bromide (CTAB)-coated GNRs) are currently limited by their cytotoxicity and insufficient colloidal stability. With an aim to address these problems, we developed a self-assembly processing technique for encapsulating GNRs in poly(ethylene oxide)-poly(n-butyl acrylate) (PEO-PnBA) block copolymer (BCP) micelles. This technique uses simple steps of solvent exchange processes, based on the known principles of block copolymer self-assembly. The resultant BCP-encapsulated GNRs were found to be stable against aggregation under physiological salt conditions for indefinite periods of time, which has rarely previously been achieved by other means of encapsulation.

Optical method for predicting the composition of self-assembled monolayers of mixed thiols on surfaces coated with silver nanoparticles

With a simple optical method, based on UV-vis absorption spectra on glass slides, it is possible to predict the composition of self-assembled monolayers of mixed thiols, grafted on monolayers of silver nanoparticles. Glass slides are modified with the layer-by-layer technique, first forming a monolayer of mercaptopropyltrimethoxysilane, then grafting a monolayer of silver nanoparticles on it. These surfaces are further coated by single or mixed thiol monolayers, by dipping the slides in toluene solutions of the chosen thiols. Exchange constants are calculated for the competitive deposition between the colorless 1-dodecanethiol or PEG5000 thiol and BDP-SH, with the latter being a thiol-bearing molecule containing the strongly absorbing BODIPY (4,4-difluoro-4-bora-3a,4a-diaza-s-indacene) moiety, synthesized on purpose. The constants are calculated by determining the fraction of BDP-SH deposited on the surface from a solution with a given molar fraction, directly measuring the absorption spectra of BDP-SH on the slides. Then, the exchange constant for the competitive deposition between 1-dodecanethiol and PEG5000 thiol is calculated by combining their exchange constants with BDP-SH. This allows to predict the fraction of the two colorless thiols coating the silver nanoparticles slides obtained from a toluene solution with a given molar fraction, for example, of PEG5000 thiol. The correctness of the calculated surface fraction is verified by studying the coating competition between 1-dodecanethiol and a PEG5000 thiol remotely modified with a strongly absorbing fluorescein fragment.