Cellular and molecular investigations of the adhesion and mechanics of Listeria monocytogenes lineages' I and II environmental and epidemic strains

Listeria monocytogenes Assessment in a Ready-to-Eat Salad Shelf-Life Study Using Conventional Culture-Based Methods, Genetic Profiling, and Propidium Monoazide Quantitative PCR

Listeriosis is almost entirely transmitted through foods contaminated with Listeria monocytogenes. Ready-to-eat foods present a particular challenge due to their long refrigerated shelf-life, not requiring any heat treatment before consumption. In this work, a shelf-life assessment of an industrially produced ready-to-eat salad was performed using conventional culture-based and molecular methods. L. monocytogenes isolates were confirmed and serogrouped using multiplex PCR, and genetic subtyping was performed by pulsed-field gel electrophoresis (PFGE). PMAxx-qPCR was used as an alternative method for L. monocytogenes quantification in foods. Salad samples were kept at 4 °C, 12 °C, and 16 °C for eight days and analysed. At 4 °C, acceptable results were obtained considering hygiene indicators, i.e., Enterobacteriaceae (ranging from 3.55 ± 0.15 log cfu/g to 5.39 ± 0.21 log cfu/g) and aerobic mesophilic colony counts (5.91 ± 0.90 log cfu/g to 9.41 ± 0.58 log cfu/g) throughout the study, but the same did not happen at 12 °C and 16 °C. L. monocytogenes culture-based quantification exhibited low numbers (<1 log cfu/g) for all temperatures. From 30 presumptive isolates, 10 (33.3%) were confirmed as L. monocytogenes with the majority belonging to serogroup IVb. PFGE subtyping showed that 7 of the 10 L. monocytogenes isolates had 100% of pulsotype similarity, suggesting a possible common contamination source. PMAxx-qPCR revealed a statistically higher L. monocytogenes quantification (>3 log cfu/g) when compared to the conventional culture-based method, suggesting viable but non-culturable forms. Taken together, results underline the need to combine conventional methods with more sensitive, specific, and rapid ones for L. monocytogenes assessment in ready-to-eat foods shelf-life studies to reduce the potential risk for consumers.

Force-Averaging DLVO Model Predictions of the Adhesion Strengths Quantified for Pathogenic Listeria monocytogenes EGDe Grown under Variable pH Stresses

The roles of the bacterial surface biopolymers of pathogenic Listeria monocytogenes EGDe grown under variable pH conditions in governing their adhesion to a model surface of silicon nitride were investigated using atomic force microscopy under water. Our results indicated that the adhesion forces were the highest for cells cultured in media adjusted to pH 7 followed by 1.39, 1.49, 1.57, and 2.18-fold reductions at pH 6, 8, 9, and 5, respectively. Adhesion energies followed the same trends with 1.35, 1.67, 2.20, and 2.79-fold reductions in energies at pH 6, 8, 9, and 5, respectively, compared to the energy measured at pH 7. Furthermore, the structural properties of the bacterial surface biopolymer brush represented by the biopolymer brush thickness (L_o) and the molecular density (Γ) were determined by fitting a steric model of repulsion to the approach force-distance data. The L_o values followed the same trends as adhesion forces and energies, with thickness being highest at pH 7 followed by 1.82, 2.99, 3.11, and 4.66-fold reductions at pH 6, 8, 9, and 5, respectively. Γ was the highest at pH 5 and was followed by 1.26, 1.27, 1.70, and 2.82-fold reductions at pH 8, 9, 6, and 7, respectively. Our results indicated that bacterial adhesion forces and energies increased linearly with the product of L_o and Γ representing the number of biopolymers per unit length of the bacterial surface. To predict the adhesion forces and energies measured, a force-averaging model of the soft-particle analysis of the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory was used. In addition to the standard parameters accounted for in the soft-particle analysis of the DLVO theory such as surface potential, hydrophobicity, and size, this averaging model incorporates in it structural bacterial parameters such as L_o and Γ as well as a surface coverage factor (ϕ) that represents the fraction of the bacterial surface covered by biopolymers. When the soft-particle analysis of DLVO was considered, repulsive hydrogen bond strengths were predicted at close distances of approach (<0.3 nm). In comparison, the force-averaging model predicted that attractive hydrogen bonds dominate the bacterial adhesion strengths quantified. The highest adhesion quantified for cells grown at pH 7 was related to longer and more spaced biopolymers, higher contents of cellular carbohydrates, and more hydrophilic biopolymers, each of which contributes to higher possibilities for hydrogen bonding formation. These results are significant in designing new strategies that aim at controlling bacterial adhesion to surfaces.

Variations in the Morphology, Mechanics and Adhesion of Persister and Resister E. coli Cells in Response to Ampicillin: AFM Study

Persister bacterial cells are great at surviving antibiotics. The phenotypic means by which they do that are underexplored. As such, atomic force microscope (AFM) was used to quantify the contributions of the surface properties of the outer membrane of multidrug resistance (MDR)-Escherichia coli Strains (A5 and A9) in the presence of ampicillin at minimum inhibitory concentration (MIC) (resistant cells) and at 20× MIC (persistent cells). The properties quantified were morphology, root mean square (RMS) roughness, adhesion, elasticity, and bacterial surface biopolymers' thickness and grafting density. Compared to untreated cells, persister cells of E. coli A5 increased their RMS, adhesion, apparent grafting density, and elasticity by 1.2, 3.4, 2.0, and 3.3 folds, respectively, and decreased their surface area and brush thickness by 1.3 and 1.2 folds, respectively. Similarly, compared to untreated cells, persister cells of E. coli A9 increased their RMS, adhesion and elasticity by 1.6, 4.4, and 4.5 folds, respectively; decreased their surface area and brush thickness by 1.4 and 1.6 folds, respectively; and did not change their grafting densities. Our results indicate that resistant and persistent E. coli A5 cells battled ampicillin by decreasing their size and going through dormancy. The resistant E. coli A9 cells resisted ampicillin through elongation, increased surface area, and adhesion. In contrast, the persistent E. coli A9 cells resisted ampicillin through increased roughness, increased surface biopolymers' grafting densities, increased cellular elasticities, and decreased surface areas. Mechanistic insights into how the resistant and persistent E. coli cells respond to ampicillin's treatment are instrumental to guide design efforts exploring the development of new antibiotics or renovating the existing antibiotics that may kill persistent bacteria by combining more than one mechanism of action.

Using Atomic Force Microscopy To Illuminate the Biophysical Properties of Microbes

Since its invention in 1986, atomic force microscopy (AFM) has grown from a system designed for imaging inorganic surfaces to a tool used to probe the biophysical properties of living cells and tissues. AFM is a scanning probe technique and uses a pyramidal tip attached to a flexible cantilever to scan across a surface, producing a highly detailed image. While many research articles include AFM images, fewer include force-distance curves, from which several biophysical properties can be determined. In a single force-distance curve, the cantilever is lowered and raised from the surface, while the forces between the tip and the surface are monitored. Modern AFM has a wide variety of applications, but this review will focus on exploring the mechanobiology of microbes, which we believe is of particular interest to those studying biomaterials. We briefly discuss experimental design as well as different ways of extracting meaningful values related to cell surface elasticity, cell stiffness, and cell adhesion from force-distance curves. We also highlight both classic and recent experiments using AFM to illuminate microbial biophysical properties.

Persistent Listeria monocytogenes Isolates from a Poultry-Processing Facility Form more Biofilm but Do Not Have a Greater Resistance to Disinfectants Than Sporadic Strains

Some strains of Listeria monocytogenes can persist in food-processing environments, increasing the likelihood of the contamination of foodstuffs. To identify traits that contribute to bacterial persistence, a selection of persistent and sporadic L. monocytogenes isolates from a poultry-processing facility was investigated for biofilm-forming ability (crystal violet assay). The susceptibility of sessile cells to treatments (five minutes) with sodium hypochlorite having 10% active chlorine (SHY: 10,000 ppm, 25,000 ppm, and 50,000 ppm) and benzalkonium chloride (BZK: 2500 ppm, 10,000 ppm, and 25,000 ppm) was also studied. All isolates exhibited biofilm formation on polystyrene. Persistent strains showed larger (p < 0.001) biofilm formation (OD580 = 0.301 ± 0.097) than sporadic strains (OD580 = 0.188 ± 0.082). A greater susceptibility to disinfectants was observed for biofilms of persistent strains than for those of sporadic strains. The application of SHY reduced biofilms only for persistent strains. BZK increased OD580 in persistent strains (2500 ppm) and in sporadic strains (all concentrations). These results indicate that the use of BZK at the concentrations tested could represent a public health risk. Findings in this work suggest a link between persistence and biofilm formation, but do not support a relationship between persistence and the resistance of sessile cells to disinfectants.

Characterization of Listeria Monocytogenes Originating from the Spanish Meat-Processing Chain

Using agglutination techniques, 118 Listeria monocytogenes isolates from red meat and poultry were serotyped. Strains were ascribed to the serotypes 4b/4e (44.1% of the strains), 1/2 (a, b or c; 28.0%), 4c (6.8%), 4d/4e (5.9%) and 3 (a, b or c; 2.5%). Among these are the serotypes most frequently involved in cases of human listeriosis. The susceptibility of 72 strains to 26 antibiotics of clinical importance was determined by disc diffusion (Clinical and Laboratory Standards Institute; CLSI). High levels of resistance were observed to cefoxitin (77.8% of the strains showed resistance), cefotaxime (62.5%), cefepime (73.6%), and nalidixic acid (97.2%), nitrofurantoin (51.4%) and oxacillin (93.1%). Less than 3% of the strains showed resistance to the antibiotic classes used in human listeriosis therapy (i.e., ampicillin, gentamicin, rifampicin, chloramphenicol, enrofloxacin, vancomycin, trimethoprim-sulfamethoxazole, erythromycin, and tetracycline). The influence of species and serotype on the growth kinetics (modified Gompertz equation) and on the adhesion ability (crystal violet staining) of nine isolates of L. monocytogenes (serotypes 1/2a, 1/2b, 1/2c, 3a, 3b, 3c, 4a, 4b, and 4d), and one strain of Listeria ivanovii were investigated. The maximum growth rate (ΔOD420-580/h) varied between 0.073 ± 0.018 (L. monocytogenes 1/2a) and 0.396 ± 0.026 (L. monocytogenes 4b). The isolates of L. monocytogenes belonging to serotypes 3a and 4a, as well as L. ivanovii, showed a greater (p < 0.05) biofilm-forming ability than did the remaining strains, including those that belong to the serotypes commonly implied in human listeriosis (1/2a, 1/2b, 1/2c and 4b). The need for training in good hygiene practices during the handling of meat and poultry is highlighted to reduce the risk of human listeriosis.

Responses of Acinetobacter baumannii Bound and Loose Extracellular Polymeric Substances to Hyperosmotic Agents Combined with or without Tobramycin: An Atomic Force Microscopy Study

In this work, contributions of extracellular polymeric substances (EPS) to the nanoscale mechanisms through which the multidrug-resistant Acinetobacter baumannii responds to antimicrobial and hyperosmotic treatments were investigated by atomic force microscopy. Specifically, the adhesion strengths to a control surface of silicon nitride (Si₃N₄) and the lengths of bacterial surface biopolymers of bound and loose EPS extracted from A. baumannii biofilms were quantified after individual or synergistic treatments with hyperosmotic agents (NaCl and maltodextrin) and an antibiotic (tobramycin). In the absence of any treatment, the loose EPS were significantly longer in length and higher in adhesion to Si₃N₄ than the bound EPS. When used individually, the hyperosmotic agents and tobramycin collapsed the A. baumannii bound and loose EPS. The combined treatment of maltodextrin with tobramycin collapsed only the loose EPS and did not alter the adhesion of both bound and loose EPS to Si₃N₄. In addition, the combined treatment was not as effective in collapsing the EPS molecules as when tobramycin was applied alone. Finally, the effects of treatments were dose-dependent. Altogether, our findings suggest that a sequential treatment could be effective in treating A. baumannii biofilms, in which a hyperosmotic agent is used first to collapse the EPS and limit the diffusion of nutrients into the biofilm, followed by the use of an antibiotic to kill the bacterial cells that escape from the biofilm because of starvation.

Genetic Characterization of Listeria monocytogenes Isolates from Industrial and Retail Ready-to-Eat Meat-Based Foods and Their Relationship with Clinical Strains from Human Listeriosis in Portugal

Listeria monocytogenes isolates (n = 81) recovered from ready-to-eat meat-based food products (RTEMP) collected in industrial processing plants and retail establishments were genetically characterized for comparison with those from human clinical cases of listeriosis (n = 49). The aim was to assess RTEMP as a possible food source for human infection. L. monocytogenes was detected in 12.5% of the RTEMP samples, and in some cases, counts were above the European food safety criteria. All isolates were assessed by multiplex PCR for serogroup determination and detection of virulence-associated genes inlA, inlB, inlC, inlJ, plcA, hlyA, actA, and iap. Serogroups IIb and IVb dominated in RTEMP and human isolates, and all were positive for the assessed virulence genes. Antibiotic susceptibility testing by the disk diffusion method revealed a low level of resistance among the isolates. Pulsed-field gel electrophoresis (PFGE) of L. monocytogenes isolates, using restriction enzymes ApaI and AscI, revealed genetic variability and differentiated the isolates in five clusters. Although some pulsed-field gel electrophoresis profiles of particular RTEMP and human isolates seemed to be highly related, exhibiting more than 90% similarity, which suggests a possible common source, in most cases the strains were not genetically or temporally matched. The close genetic relatedness of RTEMP and human listeriosis strains stressed the importance of preventive measure implementation throughout the food chain.