Reusable electrospun mesoporous ZnO nanofiber mats for photocatalytic degradation of polycyclic aromatic hydrocarbon dyes in wastewater

Kinetics analysis of PAHs degradation using SiO2-ZnO nanoparticles and evaluating their antibacterial and antibiofilm efficacy

The adsorption of Polycyclic aromatic hydrocarbons (PAHs) using nanoparticles is gaining significant attention due to the rapid removal or treatment rates. In this study, Silicon Dioxide-Zinc Oxide nanoparticles (SiO2-ZnO NPs) were synthesized to adsorb pyrene. Physicochemical characterization of SiO2-ZnO NPs showed plasmon resonance at 323 nm, agglomeration, irregular dispersion, and diameters of 90-100 nm. FT-IR analysis identified major functional groups on SiO2-ZnO NPs, including alkyne, amine, and isothiocyanate. SiO2-ZnO NPs demonstrated significant pyrene adsorption at pH 5, with 10 μg/mL of SiO2-ZnO NPs and 2 μg/mL of PAHs, performing better under UV irradiation. Two isotherm models, adsorption isotherm and kinetics adsorption, were used to analyze the PAHs adsorption by SiO2-ZnO NPs. Additionally, SiO2-ZnO NPs were tested for antibacterial and antibiofilm activities against both Gram-negative and Gram-positive bacteria. At a concentration of 150 μg/mL, SiO2-ZnO NPs produced inhibition zones of 21.57 mm, 20.30 mm, 19.30 mm, and 11.30 mm against Staphylococcus aureus, Escherichia coli, Bacillus subtilis, and Klebsiella pneumoniae, respectively. They also inhibited and disrupted biofilms of Micrococcus luteus and Acinetobacter baumannii. Furthermore, SiO2-ZnO NPs exhibited photocatalytic degradation of lead, achieving 68.24% degradation within 5 h of treatment. Therefore, SiO2-ZnO NPs are efficient candidates for multiple applications, including pyrene adsorption, bacterial biofilm disruption, and lead degradation under sunlight.

A review on recent advancements in the treatment of polyaromatic hydrocarbons (PAHs) using sulfate radicals based advanced oxidation process

Polyaromatic hydrocarbons (PAHs) are the most persistent compounds that get contaminated in the soil and water. Nearly 16 PAHs was considered to be a very toxic according US protection Agency. Though its concentration level is low in the environments but the effects due to it, is enormous. Advanced Oxidation Process (AOP) is an emergent methodology towards treating such pollutants with low and high molecular weight of complex substances. In this study, sulfate radical (SO4‾•) based AOP is emphasized for purging PAH from different sources. This review essentially concentrated on the mechanism of SO4‾• for the remediation of pollutants from different sources and the effects caused due to these pollutants in the environment was reduced by this mechanism is revealed in this review. It also talks about the SO4‾• precursors like Peroxymonosulfate (PMS) and Persulfate (PS) and their active participation in treating the different sources of toxic pollutants. Though PS and PMS is used for removing different contaminants, the degradation of PAH due to SO4‾• was presented particularly. The hydroxyl radical (•OH) mechanism-based methods are also emphasized in this review along with their limitations. In addition to that, different activation methods of PS and PMS were discussed which highlighted the performance of transition metals in activation. Also this review opened up about the degradation efficiency of contaminants, which was mostly higher than 90% where transition metals were used for activation. Especially, on usage of nanoparticles even 100% of degradation could be able to achieve was clearly showed in this literature study. This study mainly proposed the treatment of PAH present in the soil and water using SO4‾• with different activation methodologies. Particularly, it emphasized about the importance of treating the PAH to overcome the risk associated with the environment and humans due to its contamination.

Photocatalytic degradation of dyes by novel electrospun nanofibers: A review

Textile industry is a significant contributor of wastewater, which contains pollutants including dye and other chemical substances. The release of thousands of tons of dye used in textile processing and finishing into natural streams and aquatic bodies present dire harm to the environment. In response to environmental concerns, a number of research have been done using low-cost technology to produce absorbents that can remove dyes from water bodies. Distinct techniques such as adsorption, enzymatic and photocatalytic degradation, etc. have been employed to remove dyes. In the last few decades, photocatalysis, a simple and green strategy, has emerged as the most valuable and recent principle that deals with wastewater treatment, using uniquely fabricated nanomaterials. Among them, rapid and versatile electrospinning methods have been used for the construction of a large surface area, hierarchical and reusable nanofibers for environmental remediation. As a flexible and fast fabrication method, reviewing the use of electrospun photocatalytic nanofibers, influential parameters in electrospinning and their effectiveness in the generation of oxidizing agents are a promising platform for the fabrication of novel nanomaterials in photocatalytic degradation of dyes. This review discusses techniques for dye removal, electrospun nanofibers, their fabrication and application in photocatalysis; mechanism of photocatalytic degradation, and challenges and suggested remedies for electrospun nanofibers in photocatalysis.

Biocarbons Obtained from Fennel and Caraway Fruits as Adsorbents of Methyl Red Sodium Salt from Water System

The aim of this study was to prepare biocarbons by biomass activation with carbon(IV) oxide. Fennel and caraway fruits were used as the precursors of bioadsorbents. The impact of the precursor type and temperature of activation on the physicochemical properties of the obtained biocarbons and their interaction with methyl red sodium salt upon adsorption process have been checked. The obtained bioadsorbents were characterized by determination of-low temperature nitrogen adsorption/desorption, elemental analysis, ash content, Boehm titration, and pH of water extracts. The biocarbons have surface area varying from 233-371 m2/g and basic in nature with acidic/basic oxygen-containing functional groups (3.23-5.08 mmol/g). The adsorption capacity varied from 63 to 141 mg/g. The influence of different parameters, such as the effectiveness of methyl red sodium salt adsorption, was evaluated. The adsorption kinetics was well fitted using a pseudo-second-order model. The Freundlich model best represented the equilibrium data. The amount of adsorbed dye was also found to increase with the increasing temperature of the process.

Versatile Carbon Nanofiber-Based Sensors

Carbon nanofibers (CNFs) display colossal potential in different fields like energy, catalysis, biomedicine, sensing, and environmental science. CNFs have revealed extensive uses in various sensing platforms due to their distinctive structure, properties, function, and accessible surface functionalization capabilities. This review presents insight into various fabrication methods for CNFs like electrospinning, chemical vapor deposition, and template methods with merits and demerits of each technique. Also, we give a brief overview of CNF functionalization. Their unique physical and chemical properties make them promising candidates for the sensor applications. This review offers detailed discussion of sensing applications (strain sensor, biosensor, small molecule detection, food preservative detection, toxicity biomarker detection, and gas sensor). Various sensing applications of CNF like human motion monitoring and energy storage and conversion are discussed in brief. The challenges and obstacles associated with CNFs for futuristic applications are discussed. This review will be helpful for readers to understand the different fabrication methods and explore various applications of the versatile CNFs.

Bioremediation and decontamination potentials of metallic nanoparticles loaded nanohybrid matrices - A review

The current nanotechnological advancements provide an astonishing insight to fabricate nanomaterials for nano-bioremediation purposes. Exciting characteristics possessed by hybrid matrices at the nanoscale knock endless opportunities to nano-remediate environmentally-related pollunanomaterials tants of emerging concern. Nanometals are considered among the oldest generation of the world has ever noticed. These tiny nanometals and nanometal oxides showed enormous potential in almost every extent of industrial and biotechnological domains, including their potential multipurpose approach to deal with water impurities. In this manuscript, we discussed their role in the diversity of water treatment technologies used to remove bacteria, viruses, heavy metals, pesticides, and organic impurities, providing an ample perspective on their recent advances in terms of their characteristics, attachment strategies, performance, and their scale-up challenges. Finally, we tried to explore their futuristic contribution to nano-remediate environmentally-related pollutants of emerging concern aiming to collect treated yet safe water that can be reused for multipurpose.

Fabrication of High Surface Area Microporous ZnO from ZnO/Carbon Sacrificial Composite Monolith Template

Fabrication of porous materials from the standard sacrificial template method allows metal oxide nanostructures to be produced and have several applications in energy, filtration and constructing sensing devices. However, the low surface area of these nanostructures is a significant drawback for most applications. Here, we report the synthesis of ZnO/carbon composite monoliths in which carbon is used as a sacrificial template to produce zinc oxide (ZnO) porous nanostructures with a high specific surface area. The synthesized porous oxides of ZnO with a specific surface area of 78 m2/g are at least one order of magnitude higher than that of the ZnO nanotubes reported in the literature. The crucial point to achieving this remarkable result was the usage of a novel ZnO/carbon template where the carbon template was removed by simple heating in the air. As a high surface area porous nanostructured ZnO, these synthesized materials can be useful in various applications including catalysis, photocatalysis, separation, sensing, solar energy harvest and Zn-ion battery and as supercapacitors for energy storage.

Effects of Electrospinning Parameters on the Microstructure of PVP/TiO2 Nanofibers

Titanium dioxide has excellent chemical, electrical, and optical properties, as well as good chemical stability. For that reason, it is widely used in many fields of study and industry, such as photocatalysts, organic solar cells, sensors, dental implants, and other applications. Many nanostructures of TiO₂ have been reported, and electrospinning is an efficient practical technique that has a low cost and high efficiency. In various studies on improving performance, the researchers created nanofibers with suitable microstructures by changing various properties and the many process parameters that can be controlled. In this study, PVP/TiO₂ nanofibers were fabricated by the electrospinning process. The diameters of the nanofibers were controlled by various parameters. To understand the effects on the diameter of the nanofibers, various process parameters were controlled: the molecular weight and concentration of the polymers, deionized water, applied voltage, fluid velocity, and concentration of titanium precursor. The average diameter of the PVP nanofibers was controlled in a range of 42.3 nm to 633.0 nm. The average diameter of the PVP/TiO₂ nanofibers was also controlled in a range of 63.5 nm to 186.0 nm after heat treatment.

Multifunctional Oil Absorption with Macroporous Polystyrene Fibers Incorporating Silver-Doped ZnO

Hydrophobic microporous polystyrene (PS) fibers are fabricated by a solvent-induced phase-separation-assisted electrospinning method. Zinc oxide (ZnO) and silver-doped zinc oxide (Ag-ZnO) nanomaterials with variable morphologies are added to the PS fibers, to investigate the influence of multifunctional nanofiller addition on the porosity and consequent oil-adsorbing properties for different oil types. The doping of silver as well as the uniformity in particle distribution are confirmed by scanning electron microscopy and the energy-dispersive spectral analyses. The porosity of the fibers and their crystallinity effect depend on the hydrophobicity and surface properties of these microporous nanofilled fibers. Ag-ZnO, specifically in 2 wt %, enhanced the pore size and distribution in PS porous fibers, thereby enhancing the oil-adsorbing property and its hydrophobicity. In-depth analysis of the oil adsorption mechanism is done for the fibers, both qualitatively and quantitatively, to demonstrate its correlation with the structural integrity of the fibers. The PS/2Ag-ZnO composite also exhibits the highest antibacterial performance against Staphylococcus aureus, a general indication of antibiological fouling properties of these oil-separating films. The antifouling/antibacterial activity of the nanoparticles and high oil sorption capacity of the highly porous PS composites show great potential for use in water-treatment-related applications.

Photocatalysis for Organic Wastewater Treatment: From the Basis to Current Challenges for Society

Organic pollutants such as dyes, antibiotics, analgesics, herbicides, pesticides, and stimulants become major sources of water pollution. Several treatments such as absorptions, coagulation, filtration, and oxidations were introduced and experimentally carried out to overcome these problems. Nowadays, an advanced technique by photocatalytic degradation attracts the attention of most researchers due to its interesting and promising mechanism that allows spontaneous and non-spontaneous reactions as they utilized light energy to initiate the reaction. However, only a few numbers of photocatalysts reported were able to completely degrade organic pollutants. In the past decade, the number of preparation techniques of photocatalyst such as doping, morphology manipulation, metal loading, and coupling heterojunction were studied and tested. Thus, in this paper, we reviewed details on the fundamentals, common photocatalyst preparation for coupling heterojunction, morphological effect, and photocatalyst’s characterization techniques. The important variables such as catalyst dosage, pH, and initial concentration of sample pollution, irradiation time by light, temperature system, durability, and stability of the catalyst that potentially affect the efficiency of the process were also discussed. Overall, this paper offers an in-depth perspective of photocatalytic degradation of sample pollutions and its future direction.

Application of PANI/TiO2 Composite for Photocatalytic Degradation of Contaminants from Aqueous Solution

Polyaniline (PANI) is a promising conducting polymer for surface modification of TiO2 to achieve extended photoresponse to visible light and increased photocatalytic efficiency. In this study, we report the synthesis of a PANI/TiO2 composite with different weight ratios of PANI, which was subsequently employed for photocatalytic degradation of methylene blue (MB), bisphenol A (BPA), and bacteriophage MS2 under visible-light irradiation. The functional groups, morphology, and light response of the composite were characterized by Fourier-transform infrared spectroscopy, field-emission transmission electron microscopy, and diffuse reflectance UV–visible spectroscopy, respectively. The PANI/TiO2 composite containing 4% by weight ratio of PANI was most suitable for MB degradation, and this photocatalyst was very stable even after repeated use (four cycles). The degradation of BPA and bacteriophage MS2 by PANI/TiO2 composite reached 80% in 360 min and 96.2% in 120 min, respectively, under visible-light irradiation. Therefore, the PANI/TiO2 composite with enhanced visible-light photocatalytic efficiency and stability can be widely used for the degradation of water contaminants.

Photocatalytic Methylene Blue Degradation of Electrospun Ti-Zn Complex Oxide Nanofibers

Photocatalysts are the most important technology in air pollution removal and the detoxification of organic materials. Doping and complexation are among the most used methods to improve the efficiency of photocatalysts. Titanium dioxide and zinc oxide nanomaterials are widely used materials for photocatalysts and the degradation of toxic materials. Their mixed structure can be fabricated by many methods and the structure affects their properties. Nanofibers are efficient materials for photocatalysts due to their vertically formed structure, which improves the charge separation of photoelectrons. We fabricated them by an electrospinning process. A precursor consisting of titanium 4-isopropoxide, zinc acetate dihydrate and polyvinylpyrrolidone was used as a spinning solution for a mixed structure of titanium dioxide and zinc oxide with different molar ratios. They were then calcined, crystallized by heat treatment and analyzed by thermogravimetric-differential thermal analysis (TG-DTA), X-ray diffractometer (XRD), field emission scanning electron microscope (FE-SEM) and energy-dispersive spectroscope (EDS). After annealing, the average diameters of the Ti-Zn complex oxide nanofibers were 237.6-278.6 nm with different salt ratios, and multiple crystalline structures were observed, namely TiO₂, ZnO, ZnTiO₃ and Zn₂TiO₄. We observed the photocatalytic performance of the samples and compared them according to the photodegradation of methylene blue. The methylene blue concentration decreased to 0.008-0.650 after three hours, compared to an initial concentration of 1, with different metal oxide structures.

Development of ZnO Nanoflake Type Structures Using Silk Fibres as Template for Water Pollutants Remediation

We have fabricated ZnO nanoflake structures using degummed silk fibers as templates, via soaking and calcining the silk fibers bearing ZnO nanoparticles at 150 °C for 6 h. The obtained ZnO nanostructures were characterized using scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), and UV-vis and fluorescence spectroscopic analysis. The size (~500–700 nm) in length and thicknesses (~60 nm) of ZnO nanoflakes were produced. The catalysis performances of ZnO nanoflakes on silk fibers (ZnSk) via photo-degradation of naphthalene (93% in 256 min), as well as Rose Bengal dye removal (~1.7 mM g⁻¹) through adsorption from aqueous solution, were practically observed. Further, ZnSk displayed superb antibacterial activity against the tested model gram-negative Escherichia coli bacterium. The produced ZnSk has huge scope to be used for real-world water contaminants remediation applications.

Enhanced Visible Light Photocatalytic Reduction of Cr(VI) over a Novel Square Nanotube Poly(Triazine Imide)/TiO2 Heterojunction

Hexavalent chromium Cr(VI) pollution makes has a harmful impact on human health and the ecological environment. Photocatalysis reduction technology exhibits low energy consumption, high reduction efficiency and stable performance, and is playing an increasingly important role in chromium pollution control. Graphite-phase carbon nitride has been used to reduce Cr(VI) to the less harmful Cr(III) due to its visible light catalytic activity, chemical stability and low cost. However, it has a low specific surface area and fast recombination of electron–hole pairs, which severely restrict its practical application. In this work, a TiO2-modified poly(triazine imide) (PTI) square nanotube was prepared by the one-step molten salts method. The results showed the PTI had a square hollow nanotube morphology, with an about 100–1000 nm width and 60–70 nm thickness. During the formation of the PTI square tube, TiO2 nanoparticles adhere to the surface of the square tube wall by strong adsorption, and eventually form a PTI/TiO2 heterojunction. The PTI/TiO2-7 wt% heterojunction exhibited very good Cr(VI) reduction efficiency within 120 min. The enhanced photocatalytic activity was mainly attributed to the efficient separation and transport of photo-induced electron–hole pairs and the high specific surface area in the heterojunction structure.

Synthesis, Characterization and Photocatalytic Activity of Nanocrystalline First Transition-Metal (Ti, Mn, Co, Ni and Zn) Oxisde Nanofibers by Electrospinning

In this work, five nanocrystalline first transition-metal (Ti, Mn, Co, Ni and Zn) oxide nanofibers were prepared by electrospinning and controlled calcination. The morphology, crystal structure, pore size distribution and specific surface area were systematically studied by scanning electron microscope (SEM), transmission electron microscope (TEM), surface and pore analysis, and thermo gravimetric analyzer (TGA). The results reveal that the obtained nanofibers have a continuously twisted three-dimensional scaffold structure and are composed of neat nanocrystals with a necklace-like arrangement. All the samples possess high specific surface areas, which follow the order of NiO nanofiber (393.645 m2/g) > TiO2 nanofiber (121.445 m2/g) > ZnO nanofiber (57.219 m2/g) > Co3O4 nanofiber (52.717 m2/g) > Mn2O3 nanofiber (18.600 m2/g). Moreover, the photocatalytic degradation of methylene blue (MB) in aqueous solution was investigated in detail by employing the five kinds of metal oxide nanofibers as photocatalysts under ultraviolet (UV) irradiation separately. The results show that ZnO, TiO2 and NiO nanofibers exhibit excellent photocatalytic efficiency and high cycling ability to MB, which may be ascribed to unique porous structures and the highly efficient separation of photogenerated electron-hole pairs. In brief, this paper aims to provide a feasible approach to achieve five first transition-metal oxide nanofibers with excellent performance, which is important for practical applications.

Photocatalytic degradation of naphthalene using calcined FeZnO/ PVA nanofibers

Recently, the incorporation of metal oxide nanoparticles into polymers has gained great attention owing to their ample of applications. The green mediated synthesis Fe-doped ZnO nanoparticles have been incorporated into PVA nanofibers through electro spinning for the application of photocatalytic degradation. The PVA polymer concentration was optimized to obtain uniform fibers without beads. The Fe-doped ZnO nanofibers were characterized by various analyzing techniques. The results show that good physicochemical with high surface area, uniformity in fiber with an average diameter ranges from 150 to 300 and 50-200 nm for un-calcined and calcined Fe-doped ZnO nanofiber respectively. The photocatalytic activity of nanofibers was examined by the degradation of naphthalene. The efficiency was observed 96 and 81% for calcined and un-calcined nanofibers, respectively. The reusable efficacy of Fe-doped ZnO calcined nanofiber as a catalyst was studied. These studies corroborated that the calcined Fe-doped ZnO nanofiber as promising material for catalytic applications.

Chitosan Membrane Embedded With ZnO/CuO Nanocomposites for the Photodegradation of Fast Green Dye Under Artificial and Solar Irradiation

Fast Green (FCF) dye is commonly used in both cytology and histology applications. Previous studies have found that it can cause mutagenic and tumorigenic effects in experimental human and animal populations. It can also be a source of skin, eye, respiratory, and digestive irritation. The purpose of this study was to examine the use of thin film membranes to degrade FCF. A thin film membrane of chitosan (CS) was fabricated and subsequently filled with zinc oxide nanoparticles (ZnO) or ZnO/CuO-heterostructured nanocomposites. The CS membrane was used as a matrix, and the nanomaterials were used as photocatalysts. The prepared membranes were characterised by four analytical techniques: atomic force microscopy, scanning electron microscopy, X-ray diffraction, and energy-dispersive X-ray analyses. The photocatalytic activity of the fabricated membranes was evaluated by performing experiments in which aqueous solutions of FCF dye that contained the fabricated membrane were irradiated with solar light or UV light. The photodegradation percentage was spectrophotometrically determined by monitoring the maximum wavelengths (λ_max) of FCF at 623 nm for different irradiation times. The decolourisation percentages of the dye under solar light were 57.90% and 60.23% using the CS-ZnO and CS-ZnO/CuO membranes, respectively. When UV light irradiation was employed as the source of irradiation, the photodegradation percentages of FCF were 71.45% and 91.21% using the CS-ZnO and CS-ZnO/CuO membranes, respectively. These results indicated that the best photocatalytic system for the degradation of FCF dye was CS-ZnO/CuO membrane in combination with UV light irradiation. The study also found that it was easy to separate the prepared membranes after the reaction without the need for a centrifuge or magnet. The results demonstrate the potential for CS-ZnO and CS-ZnO/CuO membranes for use as effective sorbents during the process of photodegradation of harmful dyes within waste water recycling practices.

Design and application of Au decorated ZnO/TiO2 as a stable photocatalyst for wide spectral coverage

A ternary nanostructured photocatalyst consisting of ZnO/TiO₂/Au was designed to achieve an enhanced solar absorption due to the coupling of surface enhanced plasmonic absorption of metal and semiconductor excitons. TiO₂ coated ZnO rods with an aspect ratio of 8-12 were decorated with citrate capped gold nanoparticles for photocatalytic degradation of organic pollutants in simulated waste water under solar irradiation. Simulated waste water was prepared so as to get a mixture exhibiting a wide range of spectral distribution in the UV-visible region by deliberately mixing congo red, methylene blue and malachite green. Photo-oxidation of few phenolic compounds such as phenol, 4-chlorophenol and polycyclic aromatic hydrocarbons viz. anthracene and phenanthrene were also investigated in order to rule out the visible light sensitization of the dye molecules and confirm the photocatalytic efficacy of the ternary composite for a wide range of water pollutants under simulated solar irradiation. The composite exhibited enhanced photocatalytic activity and photoelectrochemical stability upon UV and visible light exposure. This enhanced efficiency was also corroborated with the photocarrier lifetime and chronoamperometric studies. Under simulated solar irradiation, UV light induced well separated charge carriers coupled with the visible light induced local surface plasmon resonance of AuNPs to exert significantly enhanced photocatalytic activity in a broad spectral region. This type of material may evolve as a novel photocatalyst for the efficient removal of organic contaminants in waste water and photoelectrochemical water splitting under the solar spectrum.

Rapid degradation of unmanageable polycyclic aromatic hydrocarbons by a C-ZnO solid solution nanocatalyst

Unmanageable polycyclic aromatic hydrocarbons (PAHs) were rapidly degraded by a C atom-doped ZnO solid solution (C-ZnO SS) nanocatalyst due to the sucker effect.

Enhanced mechanical, thermal, and UV-shielding properties of poly(vinyl alcohol)/metal–organic framework nanocomposites

Metal–organic framework (HKUST-1) nanoparticles were successfully synthesized, and poly(vinyl alcohol) (PVA)/HKUST-1 nanocomposite films were fabricated by a simple solution casting method. Our results showed that the addition of HKUST-1 caused a remarkable enhancement in both thermal stability and mechanical properties of the PVA nanocomposites, due to the homogeneous distribution of HKUST-1 and the strong interfacial interactions between PVA and HKUST-1. With incorporation of 2 wt% HKUST-1, the degradation temperature of the nanocomposites was about 33 °C higher than that of pure PVA. At the same time, the Young's modulus and tensile strength of the nanocomposites was approximately 137% and 32% higher than those of pure PVA, respectively. Moreover, the PVA/HKUST-1 nanocomposites also showed strikingly enhanced UV-shielding ability as well as satisfactory visible light transmittance, which revealed that HKUST-1 nanoparticles could act as a good UV absorber in nanocomposites. This work provides a novel and simple method for producing UV-shielding materials with simultaneously enhanced thermal and mechanical properties, which have potential applications in UV protection areas.

PVA/HKUST-1 nanocomposites prepared by a simple solution casting method displayed significantly enhanced thermal stability, mechanical and UV-shielding properties.

Nanofibrous photocatalysts from electrospun nanocapsules

We present the design of multicompartment metal oxide/silica nanofibrous photocatalysts by colloid-electrospinning and subsequent calcination. During the calcination process, silica nanomaterials are cemented to form the fibrous framework and metal oxide precursors are crystallized inside and onto the fibers. This multicompartment nanofibrous structure, constructed with nanoparticles and core-shell nanocapsules, is therefore beneficial for the separation of the materials and the light utilization due to the multiple reflections and scattering of incident light in the cavities. The photocatalytic activity of the fibers was verified by the successful degradation of a model dye rhodamine B. This synthetic methodology is a universal approach for the fabrication of nanomaterials with hierarchical hollow structures, which are emerging in energy and environmental related applications.

ZnO Nanoparticle Fortified Highly Permeable Carbon/Silica Monoliths as a Flow-Through Media

We demonstrate a facile one-pot synthesis of porous "flow-through" ZnO nanoparticle impregnated carbon/silica monoliths with high mechanical strength and interconnected end-to-end pores decorated with functional and catalytic nanoparticles. The materials and conditions for the synthesis were tailored to achieve the desired properties of high mechanical strength, good flow-through permeability, and crack-free morphology. Monoliths were prepared from a resorcinol formaldehyde rout but with the addition of tetraethyl-orthosilicate and a metal oxide precursor, ZnCl₂. The monoliths were ambient dried and carbonized under optimized conditions to suppress cracks. Compressive tests of both the resin and carbonized monoliths were performed to examine the effect of the metal oxide precursor on the mechanical properties. The permeability of the monoliths was determined to verify their utility as a flow-through material. The monoliths exhibited a high compressive modulus of ∼30 MPa compared with conventional carbon aerogels and a permeability of ∼10^-12 m². Various characterization techniques were used to analyze the surface morphology, pore texture, and chemical composition of the monoliths. Finally, Ag nanoparticles were incorporated in the monoliths to demonstrate an example of a "flow-through" catalysis application where controlled catalytic conversion of para-nitrophenol into para-aminophenol could be achieved in a continuous flow reactor mode.

Nano silver-embedded electrospun nanofiber of poly(4-chloro-3-methylphenyl methacrylate): use as water sanitizer

Water contaminated with microorganisms causes numerous diseases and is a major concern for public health. In search of a simple material which can provide clean water free from pathogens, nanofibers of poly(4-chloro-3-methylphenyl methacrylate, abbreviated as CMPMA, and nano Ag-doped poly(CMPMA) composite nanofibers were used to decontaminate water from microorganisms such as Escherichia coli and Bacillus subtilis. Nanofibers were prepared by electrospinning. X-ray diffraction (XRD) and transmission electron microscopy (TEM) provide the diameters of the Ag nanoparticles which are in the range 18-21 and 13-18 nm. The diameter of the poly(CMPMA) and nano Ag-doped poly(CMPMA) composite nanofiber is seen to vary between 400 and 700 nm with the change of the processing parameters. Optimum parameters for uniform nanofibers have been obtained. The morphology of the fibers is derived from scanning electron microscopy (SEM). The superiority of the nano Ag-doped poly(CMPMA) composite nanofiber was established.

Engineering Ceramic Fiber Nanostructures Through Polymer-Mediated Electrospinning

Electrospinning is increasingly used as a simple and straightforward technique to fabricate one-dimensional fibers from both organic and inorganic materials. These one-dimensional fibers with controlled sizes possess some unique features such as large surface area to volume ratio, high porosity, and low density. Compared to other conventional materials, these features make them attractive for applications such as energy harvesting, energy storage, super-hydrophobic membranes, and sensors. This chapter provides an overview on the synthesis of inorganic fibers through polymer-mediated electrospinning. Some of the common techniques employed by many researchers, such as solgel combined with electrospinning, emulsion electrospinning, and electrospinning combined with solid–gas reaction, to fabricate metal oxide fibers are discussed. In addition, techniques to fabricate ceramic and metal oxide fibers having different morphologies and hierarchical structures are described. Recent applications of electrospun metal oxide fibers are finally highlighted with a focus on filtration, sensors, photocatalysis, and energy.

Shape-Enhanced Photocatalytic Activities of Thoroughly Mesoporous ZnO Nanofibers

1D mesoporous materials have attracted extensive interest recently, owning to their fascinating properties and versatile applications. However, it remains as a grand challenge to develop a simple and efficient technique to produce oxide nanofibers with mesoporous architectures, controlled morphologies, large surface areas, and optimal performances. In this work, a facile foaming-assisted electrospinning strategy with foaming agent of tea saponin is used to produce thoroughly mesoporous ZnO nanofibers with high purity and controlled morphology. Interestingly, mesoporous fibers with elliptical cross-section exhibit the significantly enhanced photocatalytic activity for hydrogen production, as compared to the counterparts with circular and rectangular cross-sections, and they also perform better than the commercial ZnO nanopowders. The unexpected shape dependence of photocatalytic activities is attributed to the different stacking modes of the mesoporous fibers, and a geometrical model is developed to account for the shape dependence. This work represents an important step toward producing thoroughly mesoporous ZnO nanofibers with tailored morphologies, and the discovery that fibers with elliptical cross-section render the best performance provides a valuable guideline for improving the photocatalytic performance of such mesoporous nanomaterials.

Enhanced Soil Remediation via Plant-Based Surfactant Compounds from Acanthophyllum Laxiusculum

In the present study, an aqueous root-extract of Acanthophyllum laxiusculum (AREAL) was evaluated for phenanthrene removal from two samples of contaminated soil. AREAL showed a linear solubilization enhancement for phenanthrene with a weight solubilization ratio of 0.05. Batch soil washing experiments caused the removal of phenanthrene with efficiencies of 96.7 % and 78 % from soils with 0.78 % and 2.73 % organic carbon, respectively. Desorption kinetics of phenanthrene exhibited a two-phase pattern, namely, a rapid release as the initial phase and a slower removal as a subsequent phase. A two-compartment exponential model could adequately represent the two phases of the kinetic pattern of phenanthrene desorption. The rise of pH from acidic to basic levels, decreased phenanthrene removal due to changes in the micelle number of the surfactant phase. Maximum achievable yield of removal was 82 % phenanthrene in a column experiment at defined operational conditions. High removal efficiencies show the potential application of AREAL for improving the bioremediation of polycyclic aromatic hydrocarbons (PAHs) from contaminated soils.

Photodegradation of polycyclic aromatic hydrocarbons in soils under a climate change base scenario

The photodegradation of polycyclic aromatic hydrocarbons (PAHs) in two typical Mediterranean soils, either coarse- or fine-textured, was here investigated. Soil samples, spiked with the 16 US EPA priority PAHs, were incubated in a climate chamber at stable conditions of temperature (20 °C) and light (9.6 W m(-2)) for 28 days, simulating a climate change base scenario. PAH concentrations in soils were analyzed throughout the experiment, and correlated with data obtained by means of Microtox(®) ecotoxicity test. Photodegradation was found to be dependent on exposure time, molecular weight of each hydrocarbon, and soil texture. Fine-textured soil was able to enhance sorption, being PAHs more photodegraded than in coarse-textured soil. According to the EC50 values reported by Microtox(®), a higher detoxification was observed in fine-textured soil, being correlated with the outcomes of the analytical study. Significant photodegradation rates were detected for a number of PAHs, namely phenanthrene, anthracene, benzo(a)pyrene, and indeno(123-cd)pyrene. Benzo(a)pyrene, commonly used as an indicator for PAH pollution, was completely removed after 7 days of light exposure. In addition to the PAH chemical analysis and the ecotoxicity tests, a hydrogen isotope analysis of benzo(a)pyrene was also carried out. The degradation of this specific compound was associated to a high enrichment in (2)H, obtaining a maximum δ(2)H isotopic shift of +232‰. This strong isotopic effect observed in benzo(a)pyrene suggests that compound-specific isotope analysis (CSIA) may be a powerful tool to monitor in situ degradation of PAHs. Moreover, hydrogen isotopes of benzo(a)pyrene evidenced a degradation process of unknown origin occurring in the darkness.

Controlled synthesis of porous Co3O4 nanofibers by spiral electrospinning and their application for formaldehyde oxidation

Porous cobaltosic oxide (Co₃O₄) nanofiber mats were mass-produced by spiral electrospinning and controlled calcination, after which the three-dimensional scaffold still existed and consisted of well-twisted continuous nanofibers.

Recent advances in the synthesis and application of photocatalytic metal–metal oxide core–shell nanoparticles for environmental remediation and their recycling process

Metal–metal oxide core–shell nanoparticles have received enormous research attention owing to their fascinating physicochemical properties and extensive applications. In this review we have discussed the challenges and recent advances in their synthesis and application.

Synthesis of novel ZnO/ZnAl2O4 multi co-centric nanotubes and their long-term stability in photocatalytic application

Based on the Kirkendall effect, novel double, triple and quadruple co-centric nanotubes of ZnO/ZnAl₂O₄ have been successfully fabricated by combining the two techniques of electrospinning and atomic layer deposition.

Recent advances in electrospun metal-oxide nanofiber based interfaces for electrochemical biosensing

Synthesis of various electrospun metal-oxide nanofibers and their application towards electrochemical enzymatic and enzyme-free biosensor platforms has been critically discussed.

Anti-epidermal growth factor receptor conjugated mesoporous zinc oxide nanofibers for breast cancer diagnostics

We report the fabrication of an efficient, label-free, selective and highly reproducible immunosensor with unprecedented sensitivity (femto-molar) to detect a breast cancer biomarker for early diagnostics. Mesoporous zinc oxide nanofibers (ZnOnFs) are synthesized by electrospinning technique with a fiber diameter in the range of 50-150 nm. Fragments of ZnOnFs are electrophoretically deposited on an indium tin oxide glass substrate and conjugated via covalent or electrostatic interactions with a biomarker (anti-ErbB2; epidermal growth factor receptor 2). Oxygen plasma treatment of the carbon doped ZnOnFs generates functional groups (-COOH, -OH, etc.) that are effective for the conjugation of anti-ErbB2. ZnOnFs without plasma treatment that conjugate via electrostatic interactions were also tested for comparison. Label-free detection of the breast cancer biomarker by this point-of-care device is achieved by an electrochemical impedance technique that has high sensitivity (7.76 kΩ μM(-1)) and can detect 1 fM (4.34 × 10(-5) ng mL(-1)) concentration. The excellent impedimetric response of this immunosensor provides a fast detection (128 s) in a wide detection test range (1.0 fM-0.5 μM). The oxy-plasma treated ZnOnF immunoelectrode shows a higher association constant (404.8 kM(-1) s(-1)) indicating a higher affinity towards the ErbB2 antigen compared to the untreated ZnOnF immunoelectrode (165.6 kM(-1) s(-1)). This sensor is about an order of magnitude more sensitive than the best demonstrated in the literature based on different nanomaterials and about three orders of magnitude better than the ELISA standard for breast cancer biomarker detection. This proposed point-of-care cancer diagnostic offers several advantages, such as higher stability, rapid monitoring, simplicity, cost-effectiveness, etc., and should prove to be useful for the detection of other bio- and cancer markers.

Electrospun hollow ZnO/NiO heterostructures with enhanced photocatalytic activity

ZnO/NiO hollow nanofibers with excellent photocatalytic activity were fabricated via the electrospinning and using PES as template. The formation and the photocatalytic mechanisms of ZnO/NiO hollow nanofibers were studied.