Influence of ionic strength on poly(diallyldimethylammonium chloride) macromolecule conformations in electrolyte solutions

PDDA induced step-pyramidal growth of nickel-platinum (Ni-Pt) nanoparticles for enhanced 4-nitrophenol reduction

Herein, we report the synthesis of novel platinum-based nanoparticles with step-pyramidal growth induced by poly(diallyldimethylammonium chloride) (PDDA). The complex stepped pyramidal shape became the central point for outstanding catalytic reduction of 4-nitrophenol, overcoming the activity of bare Pt nanoparticles. These results are valuable for the catalytic degradation of reactive molecules.

A Comparison of Interpolyelectrolyte Complexes (IPECs) Made from Anionic Block Copolymer Micelles and PDADMAC or q-Chitosan as Polycation

Block copolymers synthesized via Atom Transfer Radical Polymerization from alkyl acrylate and t-butyl acrylate and the subsequent hydrolysis of the t-butyl acrylate to acrylic acid were systematically varied with respect to their hydrophobic part by the variation in the alkyl chain length and the degree of polymerisation in this block. Depending on the architecture of the hydrophobic part, they had a more or less pronounced tendency to form copolymer micelles in an aqueous solution. They were employed for the preparation of IPECs by mixing the copolymer aggregates with the polycations polydiallyldimethylammonium chloride (PDADMAC) or q-chit. The IPEC structure as a function of the composition was investigated by Static Light and Small Angle Neutron Scattering. For weakly-associated block copolymers (short alkyl chain), complexation with polycation led to the formation of globular complexes, while already existing micelles (long alkyl chain) grew further in mass. In general, aggregates became larger upon the addition of further polycation, but this growth was much more pronounced for PDADMAC compared to q-chit, thereby leading to the formation of clusters of aggregates. Accordingly, the structure of such IPECs with a hydrophobic block depended largely on the type of complexing polyelectrolyte, which allowed for controlling the structural organisation via the molecular architecture of the two oppositely charged polyelectrolytes.

Biocompatible Macroion/Growth Factor Assemblies for Medical Applications

Growth factors are a class of proteins that play a role in the proliferation (the increase in the number of cells resulting from cell division) and differentiation (when a cell undergoes changes in gene expression becoming a more specific type of cell) of cells. They can have both positive (accelerating the normal healing process) and negative effects (causing cancer) on disease progression and have potential applications in gene therapy and wound healing. However, their short half-life, low stability, and susceptibility to degradation by enzymes at body temperature make them easily degradable in vivo. To improve their effectiveness and stability, growth factors require carriers for delivery that protect them from heat, pH changes, and proteolysis. These carriers should also be able to deliver the growth factors to their intended destination. This review focuses on the current scientific literature concerning the physicochemical properties (such as biocompatibility, high affinity for binding growth factors, improved bioactivity and stability of the growth factors, protection from heat, pH changes or appropriate electric charge for growth factor attachment via electrostatic interactions) of macroions, growth factors, and macroion-growth factor assemblies, as well as their potential uses in medicine (e.g., diabetic wound healing, tissue regeneration, and cancer therapy). Specific attention is given to three types of growth factors: vascular endothelial growth factors, human fibroblast growth factors, and neurotrophins, as well as selected biocompatible synthetic macroions (obtained through standard polymerization techniques) and polysaccharides (natural macroions composed of repeating monomeric units of monosaccharides). Understanding the mechanisms by which growth factors bind to potential carriers could lead to more effective delivery methods for these proteins, which are of significant interest in the diagnosis and treatment of neurodegenerative and civilization diseases, as well as in the healing of chronic wounds.

Chitosan characteristics in electrolyte solutions: Combined molecular dynamics modeling and slender body hydrodynamics

Molecular dynamics modeling was applied to predict chitosan molecule conformations, the contour length, the gyration radius, the effective cross-section and the density in electrolyte solutions. Using various experimental techniques the diffusion coefficient, the hydrodynamic diameter and the electrophoretic mobility of molecules were determined. This allowed to calculate the zeta potential, the electrokinetic charge and the effective ionization degree of the chitosan molecule as a function of pH and the temperature. The chitosan solution density and zero shear dynamic viscosity were also measured, which enabled to determine the intrinsic viscosity increment. The experimental results were quantitatively interpreted in terms of the slender body hydrodynamics exploiting molecule characteristics derived from the modeling. It is also confirmed that this approach can be successfully used for a proper interpretation of previous literature data obtained under various physicochemical conditions.

Poly-L-Arginine Molecule Properties in Simple Electrolytes: Molecular Dynamic Modeling and Experiments

Physicochemical properties of poly-L-arginine (P-Arg) molecules in NaCl solutions were determined by molecular dynamics (MD) modeling and various experimental techniques. Primarily, the molecule conformations, the monomer length and the chain diameter were theoretically calculated. These results were used to interpret experimental data, which comprised the molecule secondary structure, the diffusion coefficient, the hydrodynamic diameter and the electrophoretic mobility determined at various ionic strengths and pHs. Using these data, the electrokinetic charge and the effective ionization degree of P-Arg molecules were determined. In addition, the dynamic viscosity measurements for dilute P-Arg solutions enabledto determine the molecule intrinsic viscosity, which was equal to 500 and 90 for ionic strength of 10⁻⁵ and 0.15 M, respectively. This confirmed that P-Arg molecules assumed extended conformations and approached the slender body limit at the low range of ionic strength. The experimental data were also used to determine the molecule length and the chain diameter, which agreed with theoretical predictions. Exploiting these results, a robust method for determining the molar mass of P-Arg samples, the hydrodynamic diameter, the radius of gyration and the sedimentation coefficient was proposed.

Vesicle-Based Gel via Polyelectrolyte-Induced Adhesion: Structure, Rheology, and Response

We describe an experimental study of soft solids composed of micron-scale lipid bilayer vesicles that adhere to one another through electrostatic attraction to an oppositely charged polymer (PDADMAC). As the polymer concentration was increased, we found a fluid phase, a solid gel phase, and a gel composed of internally reorganized vesicles. Optical microscopy images showed a nearly close-packed structure of adhered vesicles that retained their closed-cell morphology. Shear rheology measurements showed that the gel phase is a solid with a modulus at the Pa scale and with linear response up to 70% strain. We found that the modulus depends on the energy per area of membrane-membrane adhesion but does not depend on the vesicle size. We further found that the gels survived osmotic stress or dilution of the adhering polymer but could be rapidly disrupted in response to the addition of strongly binding silica nanoparticles. These results demonstrate the potential for cell-sized lipid vesicles to form a solid platform that maintains the responsive properties of the membranes. Such materials may find applications as triggerable, protective coatings of delicate surfaces.

Electrostatic interaction governed solute transport in forward osmosis

Electrolytes are commonly employed as draw solutes in forward osmosis (FO). This work demonstrates that electrostatic interactions play a key role in ion transport in the FO process. The difference in diffusivity between the constituent ions of the draw electrolyte significantly impact the forward transport of the feed ions. Draw electrolyte composed of low-diffusivity cations and high diffusivity anions promoted forward transport of the feed anions and retarded that of the feed cation, and vice versa. The effects were remarkable even for the most commonly used draw electrolytes (NaCl or MgCl₂), where the forward flux of NO₃^- and NO₂^- was found to increase by a few folds and that of NH₄⁺ was reduced by similar magnitudes than that observed in a nonelectrolyte draw solute (glucose) system. More profound increase/reduction (up to 10 times) was observed for draw electrolytes composed of highly asymmetric cations and anions. An analytical model is developed by considering the electrostatic interaction between the draw and the feed ions, to predict its effect on the forward transport of the feed ions. The normalized diffusivity difference (θD) between the constituent ions of the draw electrolyte is found as a key factor that determines the transport behaviors of the feed ions. These results may have important implications in enhancing our understanding of bidirectional ion transport in FO. The findings may also be useful in the design and development of FO processes for enhanced removal of charged pollutants via draw solute selection and formulation.

Atomistic simulation of PDADMAC/PSS oligoelectrolyte multilayers: overall comparison of tri- and tetra-layer systems

By employing large-scale molecular dynamics simulations of atomistically resolved oligoelectrolytes in aqueous solutions, we study in detail the first four layer-by-layer deposition cycles of an oligoelectrolyte multilayer made of poly(diallyl dimethyl ammonium chloride)/poly(styrene sulfonate sodium salt) (PDADMAC/PSS). The multilayers are grown on a silica substrate in 0.1 M NaCl electrolyte solutions and the swollen structures are then subsequently exposed to varying added salt concentration. We investigated the microscopic properties of the films, analyzing in detail the differences between three- and four-layer systems. Our simulations provide insights into the early stages of growth of a multilayer, which are particularly challenging for experimental observations. We found rather strong complexation of the oligoelectrolytes, with fuzzy layering of the film structure. The main charge compensation mechanism is for all cases intrinsic, whereas extrinsic compensation is relatively enhanced for the layer of the last deposition cycle. In addition, we quantified other fundamental observables of these systems, such as the film thickness, water uptake, and overcharge fractions for each deposition layer.

Kinetics of Poly-l-lysine Adsorption on Mica and Stability of Formed Monolayers: Theoretical and Experimental Studies

Various physicochemical parameters of poly-l-lysine (PLL) solutions comprising the diffusion coefficient, the electrophoretic mobility, the density, and the intrinsic viscosity were determined for the pH range 3.0-9.2. This allowed us to calculate derivative parameters characterizing the PLL molecule such as: zeta potential, the number of electrokinetic charges, ionization degree, contour length, and cross section area. These data were exploited in theoretical calculations of PLL adsorption kinetics on solid substrates under diffusion transport. A hybrid approach was used comprising a blocking function derived from the random sequential adsorption (RSA) model. In experiments, the PLL adsorption on mica was studied using the streaming potential measurements and interpreted in terms of a general electrokinetic model. This confirmed a side-on adsorption mechanism of the macroion molecules at the examined pH range. Additionally, using this method, the stability of PLL monolayers was determined performing in situ desorption kinetic experiments. In this way, the equilibrium adsorption constant and the energy minimum depth were determined. It was confirmed that the monolayer stability decreases with pH following the decrease in the number of electrokinetic charges per molecule. This confirmed the electrostatic interaction driven adsorption mechanism of PLL. It is also predicted that at pH 5.7-7.4 the monolayers were stable under diffusion-controlled desorption over the time exceeding 100 h. In addition to their significance for basic science, the results obtained in this work can be exploited for developing procedures for preparing stable PLL monolayers of well controlled coverage and electrokinetic properties.

Interactions between Metal Oxides and Biomolecules: from Fundamental Understanding to Applications

Metallo-oxide (MO)-based bioinorganic nanocomposites promise unique structures, physicochemical properties, and novel biochemical functionalities, and within the past decade, investment in research on materials such as ZnO, TiO₂, SiO₂, and GeO₂ has significantly increased. Besides traditional approaches, the synthesis, shaping, structural patterning, and postprocessing chemical functionalization of the materials surface is inspired by strategies which mimic processes in nature. Would such materials deliver new technologies? Answering this question requires the merging of historical knowledge and current research from different fields of science. Practically, we need an effective defragmentation of the research area. From our perspective, the superficial accounting of material properties, chemistry of the surfaces, and the behavior of biomolecules next to such surfaces is a problem. This is particularly of concern when we wish to bridge between technologies in vitro and biotechnologies in vivo. Further, besides the potential practical technological efficiency and advantages such materials might exhibit, we have to consider the wider long-term implications of material stability and toxicity. In this contribution, we present a critical review of recent advances in the chemistry and engineering of MO-based biocomposites, highlighting the role of interactions at the interface and the techniques by which these can be studied. At the end of the article, we outline the challenges which hamper progress in research and extrapolate to developing and promising directions including additive manufacturing and synthetic biology that could benefit from molecular level understanding of interactions occurring between inanimate (abiotic) and living (biotic) materials.

Ability of the Poisson-Boltzmann equation to capture molecular dynamics predicted ion distribution around polyelectrolytes

Here, we examine polyelectrolyte (PE) and ion chemistry specificity in ion condensation via all-atom molecular dynamics (MD) simulations and assess the ability of the Poisson-Boltzmann (PB) equation to describe the ion distribution predicted by the MD simulations. The PB model enables the extraction of parameters characterizing ion condensation. We find that the modified PB equation which contains the effective PE radius and the energy of the ion-specific interaction as empirical fitting parameters describes ion distribution accurately at large distances but close to the PE, especially when strongly localized charge or specific ion binding sites are present, the mean field description of PB fails. However, the PB model captures the MD predicted ion condensation in terms of the Manning radius and fraction of condensed counterions for all the examined PEs and ion species. We show that the condensed ion layer thickness in our MD simulations collapses on a single master curve for all the examined simple, monovalent ions (Na⁺, Br⁺, Cs⁺, Cl^-, and Br^-) and PEs when plotted against the Manning parameter (and consequently the PE line charge density). The significance of this finding is that, contrary to the Manning radius extracted from the mean field PB model, the condensed layer thickness in the all atom detail MD modelling does not depend on the PE chemistry or counterion type. Furthermore, the fraction of condensed counterions in the MD simulations exceeds the PB theory prediction. The findings contribute toward understanding and modelling ion distribution around PEs and other charged macromolecules in aqueous solutions, such as DNA, functionalized nanotubes, and viruses.

QCM-D Investigation of Swelling Behavior of Layer-by-Layer Thin Films upon Exposure to Monovalent Ions

Polyelectrolyte multilayers and layer-by-layer assemblies are susceptible to structural changes in response to ionic environment. By altering the salt type and ionic strength, structural changes can be induced by disruption of intrinsically bound ion pairs within the multilayer network via electrostatic screening. Notably, high salt concentrations have been used for the purposes of salt-annealing and self-healing of LbL assemblies with KBr, in particular, yielding a remarkably rapid response. However, to date, the structural and swelling effects of various monovalent ion species on the behavior of LbL assemblies remain unclear, including a quantitative view of ion content in the LbL assembly and thickness changes over a wide concentration window. Here, we investigate the effects of various concentrations of KBr (0 to 1.6 M) on the swelling and de-swelling of LbL assemblies formed from poly(diallyldimethylammonium) polycation (PDADMA) and poly(styrene sulfonate) polyanion (PSS) in 0.5 M NaCl using quartz-crystal microbalance with dissipation (QCM-D) monitoring as compared to KCl, NaBr, and NaCl. The ion content after salt exchange is quantified using neutron activation analysis (NAA). Our results demonstrate that Br^- ions have a much greater effect on the structure of as-prepared thin films than Cl^- at ionic strengths above assembly conditions, which is possibly caused by the more chaotropic nature of Br^-. It is also found that the anion in general dominates the swelling response as compared to the cation because of the excess PDADMA in the multilayer. Four response regimes are identified that delineate swelling due to electrostatic repulsion, slight contraction, swelling due to doping, and film destruction as ionic strength increases. This understanding is critical if such materials are to be used in applications requiring submersion in chemically dynamic environments such as sensors, coatings on biomedical implants, and filtration membranes.

Macroion adsorption-electrokinetic and optical methods

Recent studies on macroion adsorption at solid/liquid interfaces evaluated by electrokinetic and optical methods are reviewed. In the first section a description of electrokinetic phenomena at a solid surface is briefly outlined. Various methods for determining both static and dynamic properties of the electrical double layer, such as the appropriate location of the slip plane, are presented. Theoretical approaches are discussed concerning quantitative interpretation of streaming potential/current measurements of homogeneous macroscopic interfaces. Experimental results are presented, involving electrokinetic characteristics of bare surfaces, such as mica, silicon, glass etc. obtained from various types of electrokinetic cells. The surface conductivity effect on zeta potential is underlined. In the next section, various theoretical approaches, proposed to determine a distribution of electrostatic potential and flow distribution within macroion layers, are presented. Accordingly, the influence of the uniform as well as non-uniform distribution of charges within macroion layer, the dissociation degree, and the surface conductance on electrokinetic parameters are discussed. The principles, the advantages and limits of optical techniques as well as AFM are briefly outlined in Section 4. The last section is devoted to the discussion of experimental data obtained by streaming potential/current measurements and optical methods, such as reflectometry, ellipsometry, surface plasmon resonance (SPR), optical waveguide lightmode spectroscopy (OWLS), colloid enhancement, and fluorescence technique, for mono- and multilayers of macroions. Results of polycations (PEI, PAMAM dendrimers, PAH, PDADMAC) and polyanions (PAA, PSS) adsorption on mica, silicon, gold, and PTFE are quantitatively interpreted in terms of theoretical approaches postulating the three dimensional charge distribution or the random sequential adsorption model (RSA). Macroion bilayer formation, experimentally examined by streaming current measurements, and theoretically interpreted in terms of the comprehensive formalism is also reviewed. The utility of electrokinetic measurements, combined with optical methods, for a precise, in situ characteristics of macroion mono- and multilayer formation at solid/liquid interfaces is pointed out.

Mapping single macromolecule chains using the colloid deposition method: PDADMAC on mica

Monolayers of the cationic polyelectrolyte poly(diallyldimethylammonium chloride) (PDADMAC) on mica were thoroughly characterized using the streaming potential and the colloid deposition methods. Initially, the stability of the monolayers was determined by performing desorption experiments carried out under diffusion-controlled regime. It was shown that the desorption of the polyelectrolyte at the ionic strength range 0.01-0.15 M is negligible over the time of 20 h. The structure of PDADMAC monolayers and orientation of molecules were evaluated using the colloid deposition measurements involving negatively charged polystyrene latex microspheres, 820 nm in diameter. The functional relationships between the polyelectrolyte coverage and latex coverage deposited within 20 h were acquired by direct optical microscope. In this way the influence of ionic strength varied in the range 0.15-0.01 M on the molecule orientation in monolayers was determined. It was shown that for ionic strength of 0.15 M nearly one to one mapping of polyelectrolyte chains by colloid particles can be achieved for PDADMAC coverage below 0.1%. In this way, because of a considerable surface area ratio between the macromolecule and the colloid particle, an enhancement factor of 10(3) can be attained. This behavior was quantitatively interpreted in terms of the random site adsorption model whereas the classical mean-field theory proved inadequate. On the other hand, for lower ionic strength, it was confirmed that an irreversible immobilization of latex particles can only occur at a few closely spaced PDADMAC chains. It was shown that these experimental results were consistent with the side-on adsorption mechanisms of PDADMAC at mica for the above ionic strength.