Effects of interfacial layer wettability and thickness on the coating morphology and sirolimus release for drug-eluting stent

Wettability of Amino Acid-Functionalized PSMA Electrospun Fibers for the Modulated Release of Active Agents and Its Effect on Their Bioactivity

The ideal treatment for chronic wounds is based on the use of bioactive dressings capable of releasing active agents. However, the control of the rate at which these active agents are released is still a challenge. Bioactive polymeric fiber mats of poly(styrene-co-maleic anhydride) [PSMA] functionalized with amino acids of different hydropathic indices and L-glutamine, L-phenylalanine and L-tyrosine levels allowed obtaining derivatives of the copolymers named PSMA@Gln, PSMA@Phe and PSMA@Tyr, respectively, with the aim of modulating the wettability of the mats. The bioactive characteristics of mats were obtained by the incorporation of the active agents Calendula officinalis (Cal) and silver nanoparticles (AgNPs). A higher wettability for PSMA@Gln was observed, which is in accordance with the hydropathic index value of the amino acid. However, the release of AgNPs was higher for PSMA and more controlled for functionalized PSMA (PSMAf), while the release curves of Cal did not show behavior related to the wettability of the mats due to the apolar character of the active agent. Finally, the differences in the wettability of the mats also affected their bioactivity, which was evaluated in bacterial cultures of Staphylococcus aureus ATCC 25923 and methicillin-resistant Staphylococcus aureus ATCC 33592, an NIH/3T3 fibroblast cell line and red blood cells.

Laminin 332-functionalized coating to regulate the behavior of keratinocytes and gingival mesenchymal stem cells to enhance implant soft tissue sealing

Peri-implant epithelial sealing is the first line of defense against external pathogens or stimuli; hence, an essential process to prevent peri-implantitis. Laminin 332 (LN332) is the main component of the internal basal lamina and participates in peri-implant epithelial sealing by forming hemidesmosomes (HDs) with integrin α6β4. In this work, poly (D, L-lactide) (PDLLA)-LN332 composite coating was successfully constructed by a method similar to layer-by-layer assembly, displaying staged LN332 release for as long as 28 days. The PDLLA-LN332 composite coating can activate the intracellular PI3K-Akt pathway via binding to cellular integrin α6β4, which can promote adhesion, migration and proliferation of HaCaT cells and further enhance the expression of keratinocyte HD-related molecules, including integrin α6β4, LN332 and plectin. Furthermore, the PDLLA-LN332 composite coating can promote the adhesion, spreading and proliferation of gingival mesenchymal stem cells and accelerate their epithelial differentiation. Therefore, the PDLLA-LN332 composite coating can enhance implant soft tissue sealing, warranting further in vivo study.

Biodegradable shape memory alloys: Progress and prospects

Shape memory alloys (SMAs) have a wide range of potential novel medical applications due to their superelastic properties and ability to restore and retain a 'memorised' shape. However, most SMAs are permanent and do not degrade in the body when used in implantable devices. The use of non-degrading metals may lead to the requirement for secondary removal surgery and this in turn may introduce both short and long-term health risks, or additional waste disposal requirements. Biodegradable SMAs can effectively eliminate these issues by gradually degrading inside the human body while providing the necessary support for healing purposes, therefore significantly alleviating patient discomfort and improving healing efficiency. This paper reviews the current progress in biodegradable SMAs from the perspective of biodegradability, mechanical properties, and biocompatibility. By providing insights into the status of SMAs and biodegradation mechanisms, the prospects for Mg- and Fe-based biodegradable SMAs to advance biodegradable SMA-based medical devices are explored. Finally, the remaining challenges and potential solutions in the biodegradable SMAs area are discussed, providing suggestions and research frameworks for future studies on this topic.

Heparin-Tagged PLA-PEG Copolymer-Encapsulated Biochanin A-Loaded (Mg/Al) LDH Nanoparticles Recommended for Non-Thrombogenic and Anti-Proliferative Stent Coating

Drug-eluting stents have been widely implanted to prevent neointimal hyperplasia associated with bare metal stents. Conventional polymers and anti-proliferative drugs suffer from stent thrombosis due to the non-selective nature of the drugs and hypersensitivity to polymer degradation products. Alternatively, various herbal anti-proliferative agents are sought, of which biochanin A (an isoflavone phytoestrogen) was known to have anti-proliferative and vasculoprotective action. PLA-PEG diblock copolymer was tagged with heparin, whose degradation releases heparin locally and prevents thrombosis. To get a controlled drug release, biochanin A was loaded in layered double hydroxide nanoparticles (LDH), which are further encapsulated in a heparin-tagged PLA-PEG copolymer. LDH nanoparticles are synthesized by a co-precipitation process; in situ as well as ex situ loading of biochanin A were done. PLA-PEG-heparin copolymer was synthesized by esterification reaction, and the drug-loaded nanoparticles are coated. The formulation was characterized by FTIR, XRD, DSC, DLS, and TEM. In vitro drug release studies, protein adhesion, wettability, hemocompatibility, and degradation studies were performed. The drug release was modeled by mathematical models to further emphasize the mechanism of drug release. The developed drug-eluting stent coating is non-thrombogenic, and it offers close to zero-order release for 40 days, with complete polymer degradation in 14 weeks.

A Versatile Surface Modification Method via Vapor-phase Deposited Functional Polymer Films for Biomedical Device Applications

For last two decades, the demand for precisely engineered three-dimensional structures has increased continuously for the developments of biomaterials. With the recent advances in micro- and nano-fabrication techniques, various devices with complex surface geometries have been devised and produced in the pharmaceutical and medical fields for various biomedical applications including drug delivery and biosensors. These advanced biomaterials have been designed to mimic the natural environments of tissues more closely and to enhance the performance for their corresponding biomedical applications. One of the important aspects in the rational design of biomaterials is how to configure the surface of the biomedical devices for better control of the chemical and physical properties of the bioactive surfaces without compromising their bulk characteristics. In this viewpoint, it of critical importance to secure a versatile method to modify the surface of various biomedical devices. Recently, a vapor phase method, termed initiated chemical vapor deposition (iCVD) has emerged as damage-free method highly beneficial for the conformal deposition of various functional polymer films onto many kinds of micro- and nano-structured surfaces without restrictions on the substrate material or geometry, which is not trivial to achieve by conventional solution-based surface functionalization methods. With proper structural design, the functional polymer thin film via iCVD can impart required functionality to the biomaterial surfaces while maintaining the fine structure thereon. We believe the iCVD technique can be not only a valuable approach towards fundamental cell-material studies, but also of great importance as a platform technology to extend to other prospective biomaterial designs and material interface modifications for biomedical applications.

Biocompatible and functional inorganic magnesium ceramic particles for biomedical applications

Magnesium ceramics hold promise for numerous biological applications. This review covers the synthesis of magnesium ceramic particles with specific morphologies and potential modification techniques. Magnesium ceramic particles possess multiple characteristics directly applicable to human biology; they are anti-inflammatory, antibacterial, antiviral, and offer anti-cancer effects. Based on these advantages, magnesium hydroxide nanoparticles have been extensively utilized across biomedical fields. In a vascular stent, the incorporation of magnesium ceramic nanoparticles enhances re-endothelialization. Additionally, tissue regeneration for bone, cartilage, and kidney can be promoted by magnesium ceramics. This review enables researchers to identify the optimum synthetic conditions to prepare magnesium ceramics with specific morphologies and sizes and select the appropriate modification protocols. It is also intended to elucidate the desirable physicochemical properties and biological benefits of magnesium ceramics.

Persulfated flavonoids accelerated re-endothelialization and improved blood compatibility for vascular medical implants

Drug-eluting stents (DESs) have been used for the treatment of cardiovascular diseases including stenosis. However, in-stent restenosis, thrombosis, and delayed re-endothelialization represent challenges for their clinical applications. Here, we demonstrate a novel work to overcome these limitations through surface modification technology. The cobalt-chromium (Co-Cr) surface was modified with antioxidants such as gallic acid (GA) and rutin (Ru) and the corresponding persulfates derivatives (i.e., GAS, and RuS) through a simple conjugation procedure. Various analyses tools such as ATR-FTIR, XPS, water contact angle, SEM, and AFM characterized the functionalized surface. The surface characterization confirmed that the antioxidant and the additional persulfates were successfully bonded to the Co-Cr surface. The results of in vitro endothelial cells proved that the persulfates derivatives showed the highest tendency to get rapid re-endothelialization especially RuS. In addition, it showed inhibition to smooth muscle cells (SMCs) as compared to control Co-Cr substrate. The persulfates modified substrates reduced the amount of adsorbed fibrinogen and albumin with higher stability to fetal bovine serum. Moreover, platelet study also demonstrated that Ru and RuS presented lower platelet adhesion with round shape morphology, whereas the control Co-Cr adhere and activate many platelets with pseudopodium morphology. Moreover, these modification processes did not cause any inflammatory responses. In conclusion, it is believed that the persulfates flavonoids have a great potential in the field of drug-eluting stents and blood contacting medical implants to improve blood compatibility, suppress SMCs, and get rapid re-endothelialization.

Sustained drug release using cobalt oxide nanowires for the preparation of polymer-free drug-eluting stents

Polymer-based drug-eluting stents (DESs) represented attractive application for the treatment of cardiovascular diseases; however, polymer coating has caused serious adverse responses to tissues such as chronic inflammation due to acidic by-products. Therefore, polymer-free DESs have recently emerged as promising candidates for the treatment; however, burst release of drug(s) from the surface limited its applications. In this study, we focused on delivery of therapeutic drug from polymer-free (or -less) DESs through surface modification using cobalt oxide nanowires (Co₃O₄ NWs) to improve and control the drug release. The results demonstrated that Co₃O₄ NWs could be simply fabricated on cobalt-chromium substrate by ammonia-evaporation-induced method. The Co₃O₄ NWs were uniformly arrayed with diameters of 50-100 nm and lengths of 10 µm. It was found that Co₃O₄ NWs were comparatively stable without any delamination or change of the morphology under in vitro long-term stability using circulating system. Sirolimus was used as a model drug for studying in vitro release behavior under physiological conditions. The sirolimus release behavior from flat cobalt-chromium showed an initial burst (over 90%) after one day. On the other hand, Co₃O₄ NWs presented a sustained sirolimus release rate for up to seven days. Similarly, the polymer-less specimens on Co₃O₄ NWs substrates sustained sirolimus release for a longer-period of time when compared to flat Co-Cr substrates. In summary, the current approach of using Co₃O₄ NWs-based substrates might have a great potential to sustain drug release for drug-eluting implants and medical devices including stents.

Recent advances to accelerate re-endothelialization for vascular stents

Cardiovascular diseases are considered as one of the serious diseases that leads to the death of millions of people all over the world. Stent implantation has been approved as an easy and promising way to treat cardiovascular diseases. However, in-stent restenosis and thrombosis remain serious problems after stent implantation. It was demonstrated in a large body of previously published literature that endothelium impairment represents a major factor for restenosis. This discovery became the driving force for many studies trying to achieve an optimized methodology for accelerated re-endothelialization to prevent restenosis. Thus, in this review, we summarize the different methodologies opted to achieve re-endothelialization, such as, but not limited to, manipulation of surface chemistry and surface topography.

Photo Initiated Chemical Vapour Deposition To Increase Polymer Hydrophobicity

Apple growers face new challenges to produce organic apples and now many cover orchards with high-density polyethylene (HDPE) nets to exclude insects, rather than spraying insecticides. However, rainwater- associated wetness favours the development of apple scabs, Venturia inaequalis, whose lesions accumulate on the leaves and fruit causing unsightly spots. Treating the nets with a superhydrophobic coating should reduce the amount of water that passes through the net. Here we treat HDPE and polyethylene terephthalate using photo-initiated chemical vapour deposition (PICVD). We placed polymer samples in a quartz tube and passed a mixture of H2 and CO through it while a UVC lamp (254 nm) illuminated the surface. After the treatment, the contact angle between water droplets and the surface increased by an average of 20°. The contact angle of samples placed 70 cm from the entrance of the tube was higher than those at 45 cm and 20 cm. The PICVD-treated HDPE achieved a contact angle of 124°. Nets spray coated with a solvent-based commercial product achieved 180° but water ingress was, surprisingly, higher than that for nets with a lower contact angle.

Fabrication and characteristics of dual functionalized vascular stent by spatio-temporal coating

Stent implantation with balloon angioplasty is a widely used treatment for coronary artery diseases. Stents have been developed from bare metal stent (BMS) to advanced forms such as drug-eluting stent (DES). However, modern DES still causes thrombosis and/or in-stent restenosis as long-term outcomes. For effective prevention of these problems, we fabricated a dual functionalized stent using spatio-temporal coating, which has two different surfaces, as a novel type of DES. Hyaluronic acid conjugated with dopamine (HA-DA) was applied to a bare cobalt-chromium (CC) stent prior to abluminal coating of sirolimus (SRL)-in-polymer such as poly(d,l-lactide). The SRL-in-polymer (P+S) coated on the abluminal surface of the HA-DA modified stent showed highly stable coating layer and prevented the crack formation after ballooning. In the blood- and cyto-compatibility tests, HA-DA coating displayed suppressive effects on adhesion and activation of platelets and maintained the cell viability and proliferation of human coronary artery endothelial cells even under the existence of SRL. In in vivo study using porcine restenosis model, the neointimal area and inflammation score of the dual functionalized stent with HA-DA and P+S were significantly reduced than those of BMS. It is expected that this novel type of DES can be effectively applied to utilize diverse anti-proliferative drugs and bioactive polymers.

STATEMENT OF SIGNIFICANCE

Stents have been developed from bare metal stent to advanced forms such as drug-eluting stents (DESs). However, even DESs can still cause in-stent restenosis as long-term outcomes. This paper demonstrated a novel DES using spatio-temporal coating by dopamine-mediated hyaluronic acid coating (HA-DA) before asymmetric coating of sirolimus-in-poly(d,l-lactide) (P+S). It showed stable coating surface and prevented crack formation after ballooning. HA-DA coating also had an inhibitive effect on adhesion of platelets and maintained cell viability of endothelial cells even under the existence of sirolimus. Additionally, in vivo neointima area and inflammation score of HA-DA/P+S stent significantly decreased than those of BMS. We expected that this novel type of DES can be effectively applied to introduce diverse anti-proliferative drugs and bioactive molecules.