Polymer grafted magnetic nanoparticles for delivery of anticancer drug at lower pH and elevated temperature

Smart nanozymes coupled with dynamic magnet field and laser exposures for cancer therapy

Developing nanozymes for cancer therapy has attracted great attention from researchers. However, enzymes-loaded magnetic particles triggered by both a low-frequency vibrating magnetic field (VMF) and laser for inhibiting tumor growth have never been reported. Herein, we developed a magnetic nanozyme with 3D flower-like nanostructures for cancer therapy. Specifically, the flower-like nanozymes exposed to a VMF could efficiently damage the mitochondrial membrane and cell structure, and inhibit tumor growth through magneto-mechanical force. In parallel, magnetic nanozymes in a weak acid environment containing glucose could generate abundant hydrogen peroxide through glucose oxidase-catalyzed oxidation of glucose, and further significantly promote the Fenton reaction. Interestingly, both glucose oxidase- and Fenton-based catalytic reactions were significantly promoted by the VMF exposure. Flower-like magnetic nanospheres upon a near-infrared laser irradiation could also damage cancer cells and tumor tissues through photothermal effect. The cell-killing efficiency of magnetic nanozymes triggered by the VMF or laser significantly increased in comparison with that of nanozymes without exposures. Mouse tumors grown after injection with magnetic nanozymes was inhibited in a significant way or the tumors disappeared after exposure to a VMF and laser due to the synergistic effect of four major stimuli, viz., magneto-mechanical force, photothermal conversion, improved Fenton reaction, and intratumoral glucose consumption-based starvation effect. This is a great platform that may be suitable for treating many solid tumors.

Di-aldehyde tunicate cellulose nanocrystal (D-tCNC) aerogels for drug delivery: Effect of D-tCNC composition on aerogel structure and release properties

Aerogels as drug carriers have the characteristics of a large specific surface area, high porosity and an elastic skeleton structure. Compared with traditional drug carriers, the use of aerogels as drug carriers can avoid the complexity of drug delivery and improve the efficiency of drug loading. In this work, the oxidation of tunicate cellulose nanocrystals (tCNCs) with NaIO4 was used to prepare di-aldehyde tunicate cellulose nanocrystals (D-tCNCs). Tetracycline (TC) was used as a drug model and pH-responsive drug-loaded aerogels were prepared by the Schiff base reaction between TC and the aldehyde group on D-tCNCs. The chemical structure, crystallinity, morphology, compression properties, porosity, swelling rate and drug loading properties were investigated by FT-IR, XRD, SEM and universal testing machines. The results showed that the porosity and equilibrium swelling ratio of the D-tCNC-TC aerogels were 95.87 % and 17.52 g/g, respectively. The stress of the D-tCNC-TC aerogel at 15 % compression was 0.07 MPa. Moreover, the analysis of drug-loaded aerogels indicated that the drug loading and encapsulation rates of D-tCNC-TC aerogels were 16.86 % and 78.75 %, respectively. In in vitro release experiments, the cumulative release rate of drug-loaded aerogel at pH = 1.2 and pH = 7.4 was 87.5 % and 79.3 %, respectively. These results indicated that D-tCNC-TC aerogels have good drug loading capacity and are pH-responsive in the pH range of 1.2 to 7.4. The prepared D-tCNC-TC aerogels are expected to be applied in drug delivery systems.

Recent Advances in Applications of Oxidases and Peroxidases Polymer-Based Enzyme Biocatalysts in Sensing and Wastewater Treatment: A Review

Oxidase and peroxidase enzymes have attracted attention in various biotechnological industries due to their ease of synthesis, wide range of applications, and operation under mild conditions. Their applicability, however, is limited by their poor stability in harsher conditions and their non-reusability. As a result, several approaches such as enzyme engineering, medium engineering, and enzyme immobilization have been used to improve the enzyme properties. Several materials have been used as supports for these enzymes to increase their stability and reusability. This review focusses on the immobilization of oxidase and peroxidase enzymes on metal and metal oxide nanoparticle-polymer composite supports and the different methods used to achieve the immobilization. The application of the enzyme-metal/metal oxide-polymer biocatalysts in biosensing of hydrogen peroxide, glucose, pesticides, and herbicides as well as blood components such as cholesterol, urea, dopamine, and xanthine have been extensively reviewed. The application of the biocatalysts in wastewater treatment through degradation of dyes, pesticides, and other organic compounds has also been discussed.

Study on Doxorubicin Loading on Differently Functionalized Iron Oxide Nanoparticles: Implications for Controlled Drug-Delivery Application

Nanoplatforms applied for the loading of anticancer drugs is a cutting-edge approach for drug delivery to tumors and reduction of toxic effects on healthy cells. In this study, we describe the synthesis and compare the sorption properties of four types of potential doxorubicin-carriers, in which iron oxide nanoparticles (IONs) are functionalized with cationic (polyethylenimine, PEI), anionic (polystyrenesulfonate, PSS), and nonionic (dextran) polymers, as well as with porous carbon. The IONs are thoroughly characterized by X-ray diffraction, IR spectroscopy, high resolution TEM (HRTEM), SEM, magnetic susceptibility, and the zeta-potential measurements in the pH range of 3-10. The degree of doxorubicin loading at pH 7.4, as well as the degree of desorption at pH 5.0, distinctive to cancerous tumor environment, are measured. Particles modified with PEI were shown to exhibit the highest loading capacity, while the greatest release at pH 5 (up to 30%) occurs from the surface of magnetite decorated with PSS. Such a slow release of the drug would imply a prolonged tumor-inhibiting action on the affected tissue or organ. Assessment of the toxicity (using Neuro2A cell line) for PEI- and PSS-modified IONs showed no negative effect. In conclusion, the preliminary evaluation of the effects of IONs coated with PSS and PEI on the rate of blood clotting was carried out. The results obtained can be taken into account when developing new drug delivery platforms.

Multifunctional Iron Oxide Magnetic Nanoparticles for Biomedical Applications: A Review

Due to their good magnetic properties, excellent biocompatibility, and low price, magnetic iron oxide nanoparticles (IONPs) are the most commonly used magnetic nanomaterials and have been extensively explored in biomedical applications. Although magnetic IONPs can be used for a variety of applications in biomedicine, most practical applications require IONP-based platforms that can perform several tasks in parallel. Thus, appropriate engineering and integration of magnetic IONPs with different classes of organic and inorganic materials can produce multifunctional nanoplatforms that can perform several functions simultaneously, allowing their application in a broad spectrum of biomedical fields. This review article summarizes the fabrication of current composite nanoplatforms based on integration of magnetic IONPs with organic dyes, biomolecules (e.g., lipids, DNAs, aptamers, and antibodies), quantum dots, noble metal NPs, and stimuli-responsive polymers. We also highlight the recent technological advances achieved from such integrated multifunctional platforms and their potential use in biomedical applications, including dual-mode imaging for biomolecule detection, targeted drug delivery, photodynamic therapy, chemotherapy, and magnetic hyperthermia therapy.

Superparamagnetic iron oxide nanoparticles functionalized with a binary alkoxysilane array and poly(4-vinylpyridine) for magnetic targeting and pH-responsive release of doxorubicin

The reported supramolecular arrangement offers an attractive strategy for the pH-sensitive and magnetically-guided release of doxorubicin, which could allow exploring novel therapeutic schemes against cancer.

Enhanced magnetic heating efficiency at acidic pH for magnetic nanoemulsions stabilized with a weak polyelectrolyte

HYPOTHESIS

Magnetic fluid hyperthermia has attracted considerable attention for cancer therapeutics. Magnetic nanoemulsions are potential candidates for multi-modal hyperthermia due to the possibility of volumetric loading with suitable chemo/photo-therapy agents. Often, the nanocarriers are stabilized using organic molecules that behave differently under varying pH and hence, an understanding of their interfacial behaviour is important for practical applications.

EXPERIMENTS

We probe the magnetic heating efficiency of poly acrylic acid (PAA) stabilized oil-in-water magnetic nanoemulsions, as a function of pH, where the conformational changes of the PAA molecules are studied using dynamic light scattering and inter-droplet force measurements.

FINDINGS

A ~50% enhanced heating efficiency is observed when solution pH is reduced from ~9 to 3, which is attributed to the coil-to-globule conformational changes of the PAA molecules. The increased ionization of the carboxylic acid groups, at higher pH, leads to reduced hydrophobicity that results in an increase in the interfacial thermal resistance causing a lower magneto-thermal heating efficiency at higher pH. The proposed interfacial heat transfer hypothesis is experimentally verified using thermal imaging, where a lower rate of heat transfer is obtained at higher pH. The observed enhanced hyperthermia efficiency at low pH is beneficial for designing efficient pH-responsive nano-carriers for multi-modal hyperthermia.

Thermal and microwave synthesized SPIONs: Energy effects on the efficiency of nano drug carriers

Superparamagnetic iron oxide nanoparticles (SPIONs) were optimally synthesized employing two energy sources viz. thermal and microwave using low temperature co-precipitation process. Both methods yielded particles with optimum physicochemical properties for biomedical applications like smaller size (~6--7 nm), narrow size distribution (standard deviation ~1.6-1.7 nm) and good magnetic parameters (saturation magnetisation ~53 emu/g at 9 T). Simplified process made use of domestic oven. After coating by amino acid serine, successful loading (>8 wt%) of drug Doxorubicin was achieved for both SPIONs. Microwave sample showed equivalently efficient drug loading despite half the serine coating. Findings were confirmed by various techniques like X-ray diffraction (XRD), transmission electron microscopy (TEM), Vibrating sample magnetometer (VSM) and thermo gravimetric analysis (TGA) etc. Differences in thermal homogeneities and efficiency of heat transfer between two energy modes affected the properties of synthesized SPIONs. Differences were observed in amount of serine coating, drug release behaviour and in vitro experiments on A549 cells like internalisation and cell viability data. About 59 and 39% pH and time dependent drug release at pH 5 was obtained for thermal and microwave sample respectively. In vitro experiments confirmed the successful internalisation and cell death, supporting the suitability of SPIONS as efficient targeted drug carriers. Despite lesser drug release, microwave sample showed comparable in vitro results. Study emphasizes the role and importance of energy in affecting the efficiency and functional behaviour of SPIONs as nano drug carriers. Being biocompatible and magnetic these particles can be applied successfully as efficient targeted drug delivery agents.

A physical approach for the estimation of the SERS enhancement factor through the enrichment and separation of target molecules using magnetic adsorbents

The controllable synthesis of nanosized Fe₃O₄ (10–20 nm) encapsulated in different numbers of graphene layers (1–5 layers) (Fe₃O₄@DGL NPs) was realized through a facile and green hydrothermal reaction at a temperature as low as 200 °C.

AMF-responsive doxorubicin loaded β-cyclodextrin-decorated superparamagnetic nanoparticles

An alternating magnetic field (AMF)-responsive controlled release system has been developed by the binding of mono-6-deoxy-6-(p-tolylsulfonyl)-β-cyclodextrin (βCD-Ts) onto amine-modified superparamagnetic iron oxide nanoparticles (MNP-NH₂), resulting in a MNP-βCD nanocarrier.

Environmental implications and applications of engineered nanoscale magnetite and its hybrid nanocomposites: A review of recent literature

This review focuses on environmental implications and applications of engineered magnetite (Fe3O4) nanoparticles (MNPs) as a single phase or a component of a hybrid nanocomposite that exhibits superparamagnetism and high surface area. MNPs are synthesized via co-precipitation, thermal decomposition and combustion, hydrothermal process, emulsion, microbial process, and green approaches. Aggregation/sedimentation and transport of MNPs depend on surface charge of MNPs and geochemical parameters such as pH, ionic strength, and organic matter. MNPs generally have low toxicity to humans and ecosystem. MNPs are used for constructing chemical/biosensors and for catalyzing a variety of chemical reactions. MNPs are used for air cleanup and carbon sequestration. MNP nanocomposites are designed as antimicrobial agents for water disinfection and flocculants for water treatment. Conjugated MNPs are widely used for adsorptive/separative removal of organics, dyes, oil, arsenic, phosphate, molybdate, fluoride, selenium, Cr(VI), heavy metal cations, radionuclides, and rare earth elements. MNPs can degrade organic/inorganic contaminants via chemical reduction or catalyze chemical oxidation in water, sediment, and soil. Future studies should further explore mechanisms of MNP interactions with other nanomaterials and contaminants, economic and green approaches of MNP synthesis, and field scale demonstration of MNP utilization.

Stimuli-responsive poly(N-isopropyl acrylamide)-co-tyrosine@gadolinium: Iron oxide nanoparticle-based nanotheranostic for cancer diagnosis and treatment

In this paper, we have prepared a stimuli-responsive polymer modified gadolinium doped iron oxide nanoparticle (poly@Gd-MNPs) as cancer theranostic agent. The responsive polymer is composed of the poly(N-isopropyl acrylamide)-co-tyrosine unit, which shows excellent loading for the anti-cancer drug (methotrexate) and stimuli dependent release (change in pH and temperature). The in vitro experiment revealed that the poly@Gd-MNPs exhibited T1-weighted MRI capability (r1=11.314mM(-1)s(-1)) with good in-vitro hyperthermia response. The prepared poly@Gd-MNPs has generated quick heating (45°C in 2min) upon exposure to an alternating magnetic field and able to travel a distance of 35cm in 1min in the presence of an external magnet. The poly@Gd-MNPs shows 86% of drug loading capacity with 70% drug release in first 2h. The cytotoxic assay (MTT) demonstrated that the nanoparticle did not affect the viability of normal human fibroblast and efficiently kill the MCF7 cancer cells in the presence of an external magnetic field. To explore the uptake of poly@Gd-MNPs in the cells, bright field cell imaging study was also performed. This study provides a valuable approach for the design of highly sensitive polymer modified gadolinium doped iron oxide-based T1 contrast agents for cancer theranostics.

Magnetic-responsive microparticles with customized porosity for drug delivery

One step engineering of drug-loaded magnetic porous particles for controlled release and targeting.