New sustainable hybrid material as adsorbent for dye removal from aqueous solutions

Anionic Dye Removal with a Thin Cationic Polyaniline Coating on Cellulosic Biomaterial

This paper reports the development of novel adsorbent materials using polyaniline (PANI) grafted onto Posidonia (POS) fibers, aimed at efficiently removing phenol red (PSP), an anionic dye, from aqueous solutions. The synthesis involved the copolymerization of aniline grafted on the surface of the POS and aniline monomer in solution, resulting in a chemically bound thin PANI layer on the POS bioadsorbent. Structural characteristics and binding affinities of these adsorbents with PANI under its emeraldine salt (POS@PANI-ES) or emeraldine base (POS@PANI-EB) forms are reported. The rapid adsorption kinetics observed are attributed to enhanced accessibility to PANI adsorption sites on the POS surface. The binding percentages of PSP to POS@PANI-ES and POS@PANI-EB materials were found to be 97 and 50%, respectively, after 15 min of contact time. The Langmuir model for localized adsorption sites and the Volmer model for nonlocalized adsorption as a mobile layer were fitted to the experimental adsorption isotherms of PSP to POS@PANI-EB and POS@PANI-ES, yielding the thermodynamic parameters of adsorption. The adsorption capacities of PSP on POS@PANI-EB and POS@PANI-ES were 37.8 and 71.5 μmol g-1, respectively. The adsorption of PSP remained above 80% at moderate salt concentrations of around 0.1 mol L-1; however, higher concentrations of NaCl and CaCl2 in PSP solutions significantly reduced the adsorption on POS@PANI-ES.

Synthesis and adsorption performance of functionalized chitosan and carboxyethylsilanetriol hybrids

A novel adsorbent from cationic chitosan derivative and anionic silica precursor was fabricated to remove methylene blue (MB). The hybrid material was prepared from N-guanidinium chitosan acetate (GChi) and carboxyethylsilanetriol sodium salt by a simple ionic interaction followed by sol-gel approach. Multiple characterization methods were used to analyze the morphology and the structure of the well-prepared functionalized material. Batch experiments were conducted to optimize the various operational parameters. The Langmuir isotherm was used to fit the data, and it predicted monolayer adsorption with a maximum capacity of 334 mg g^-1. A pseudo-second-order equation fit the adsorption process well. Chitosan/silica hybrids containing carboxylic groups are efficient and cost-effective adsorbents for cationic dyes adsorption from aqueous solutions.

A Review on the Potential Bioactive Components in Fruits and Vegetable Wastes as Value-Added Products in the Food Industry

The food production industry is a significant contributor to the generation of millions of tonnes of waste every day. With the increasing public concern about waste production, utilizing the waste generated from popular fruits and vegetables, which are rich in high-added-value compounds, has become a focal point. By efficiently utilizing food waste, such as waste from the fruit and vegetable industries, we can adopt a sustainable consumption and production pattern that aligns with the Sustainable Development Goals (SDGs). This paper provides an overview of the high-added-value compounds derived from fruit and vegetable waste and their sources. The inclusion of bioactive compounds with antioxidant, antimicrobial, and antibrowning properties can enhance the quality of materials due to the high phenolic content present in them. Waste materials such as peels, seeds, kernels, and pomace are also actively employed as adsorbents, natural colorants, indicators, and enzymes in the food industry. Therefore, this article compiles all consumer-applicable uses of fruit and vegetable waste into a single document.

Turning Food Protein Waste into Sustainable Technologies

For each kilogram of food protein wasted, between 15 and 750 kg of CO2 end up in the atmosphere. With this alarming carbon footprint, food protein waste not only contributes to climate change but also significantly impacts other environmental boundaries, such as nitrogen and phosphorus cycles, global freshwater use, change in land composition, chemical pollution, and biodiversity loss. This contrasts sharply with both the high nutritional value of proteins, as well as their unique chemical and physical versatility, which enable their use in new materials and innovative technologies. In this review, we discuss how food protein waste can be efficiently valorized not only by reintroduction into the food chain supply but also as a template for the development of sustainable technologies by allowing it to exit the food-value chain, thus alleviating some of the most urgent global challenges. We showcase three technologies of immediate significance and environmental impact: biodegradable plastics, water purification, and renewable energy. We discuss, by carefully reviewing the current state of the art, how proteins extracted from food waste can be valorized into key players to facilitate these technologies. We furthermore support analysis of the extant literature by original life cycle assessment (LCA) examples run ad hoc on both plant and animal waste proteins in the context of the technologies considered, and against realistic benchmarks, to quantitatively demonstrate their efficacy and potential. We finally conclude the review with an outlook on how such a comprehensive management of food protein waste is anticipated to transform its carbon footprint from positive to negative and, more generally, have a favorable impact on several other important planetary boundaries.

Surface Characteristics of Electrospun p-Sulphonated Calix[4]Arene Functionalized Cellulose Acetate Nanofiber and Its Behaviour towards Methylene Blue Adsorption

p-sulphonated calix[4]arene (p-SOCX) functionalized cellulose acetate/graphene oxide (CA/GO) nanofibers were successfully prepared via the electrospinning technique. The presence of p-SOCX within the fiber matrix was ascertained using Fourier Transform Infrared spectroscopy and Carbon-Hydrogen-Nitrogen-Sulphur elemental analyses. Apparent changes in morphology of the samples were observed under scanning electron microscope where fiber diameters increased with increasing p-SOCX content. Preliminary dye removal test at different pH, dosage, and temperature of functionalized CA/GO nanofiber demonstrates enhanced adsorption capacity of methylene blue in presence of p-SOCX compared to pristine CA nanofiber and CA/GO nanofiber at an optimum pH 8. The highest removal efficiency obtained was 88.84% with initial methylene blue dye concentration of 10 mg/L, adsorbent dosage of 20 mg/10 mL, contact time of 30 min at room temperature ca. 293 K.

Coupling of 3-Aminopropyl Sulfonic Acid to Cellulose Nanofibers for Efficient Removal of Cationic Dyes

A novel anionic nanostructured cellulose derivate was prepared through the coupling of TEMPO-oxidized cellulose nanofibers with 3-aminopropyl sulfonic acid (3-APSA). 3-APSA grafting was variously investigated by FT-IR spectroscopy and transmission electron microscopy (TEM) analysis, confirming a high reaction degree. The surface morphology investigated via scanning electron microscopy (SEM) revealed a more uniform organization of the nanofibers after the 3-APSA coupling, with improvements in terms of fiber packing and pore interconnectivity. This peculiar morphology contributes to improving methylene blue (MB) adsorption and removal efficiency at different operating conditions (pH, initial time, and initial concentration). The results indicated a maximum adsorption capacity of 526 mg/g in the case of 3-APSA grafted nanofibers, over 30% more than that of non-grafted ones (370 mg/g), which confirm a relevant effect of chemical modification on the adsorbent properties of cellulose nanofibers. The adsorption kinetics and isotherms of the current adsorbents match with the pseudo-second-order kinetic and Langmuir isotherm models. This study suggests the use of chemical grafting via 3-APSA is a reliable and facile post-treatment to design bio-sustainable and reusable nanofibers to be used as high-performance adsorbent materials in water pollutant remediation.

Conversion of Industrial Sludge into Activated Biochar for Effective Cationic Dye Removal: Characterization and Adsorption Properties Assessment

This paper presents an in-depth characterization of a raw industrial sludge (IS-R) and its KOH-activated biochar pyrolyzed at 750 °C (IS-KOH-B) followed by their application to remove a cationic dye from aqueous solution. Materials characterization shows that compared to the IS-R, the IS-KOH-B has improved structural, textural, and surface chemical properties. In particular, the IS-KOH-B’s BET surface area and total pore volume are about 78 and 6 times higher than those found for the IS-R, respectively. The activated biochar efficiently retained the cationic dye under wide experimental conditions. Indeed, for an initial dye concentration of 50 mg L−1, removal yields were assessed to be more than 92.5%, 93.5%, and 97.8% for a large pH range (4–10), in the presence of high contents of competing cations (3000 mg L−1 of Ca2+, Mg2+, Na+, and K+), and a low used adsorbent dose (1 g L−1), respectively. The Langmuir’s adsorption capacities were 48.5 and 65.9 mg g−1 for of IS-R and IS-KOH-B, respectively, which are higher than those reported for various adsorbents in the literature. The dye removal was found to be monolayer, spontaneous, and endothermic for both the adsorbents. Moreover, this removal process seems to be controlled by chemical reactions for IS-KOH-B whereas by both physico–chemical reactions for IS-R. This study demonstrates that the raw industrial sludge and especially its KOH-activated derived biochar could be considered as promising adsorbents for the removal of dyes from aqueous solutions.

Noble metal-doped TiO2 thin films in the efficient removal of Mordant Orange-1: insights of degradation process

Nanocomposite Ag⁰(NPs)/TiO₂ is synthesised in a facile template method enabling nanoparticles of reduced Ag evenly distributed within the titania network. The morphological studies of nanocomposites were extensively performed employing SEM/EDX (scanning electron microscopy/energy dispersive X-ray), TEM (transmission electron microscopy) and AFM (atomic force microscopy). Moreover, the bandgap energies of materials were obtained using the diffuse reflectance spectrometer (DRS). The newer insights in the photocatalytic elimination of Mordant Orange-1 (MO1) was obtained using the nanocomposite thin film for various parametric studies utilising the UV-A and LED illuminations. The kinetics of degradation of MO1 was performed, and the rate constant was favoured at lower concentrations of MO1. Moreover, the elimination efficiency of MO1 was favoured with a decrease in solution pH. The NPOC results inferred that a fairly good extent of MO1 was mineralised using a thin-film catalyst for both the UV-A and LED illuminations. The minimal effect of several co-ions demonstrated the applicability of thin films in the elimination of MO1, and the stability of the thin film has shown the potential applicability of thin-film catalysts. Further, the mechanism of photocatalytic degradation was demonstrated with the radical scavenger studies and ascertained the reaction pathways.

Valorization of food waste as adsorbents for toxic dye removal from contaminated waters: A review

Industrial contaminants such as dyes and intermediates are released into water bodies, making the water unfit for human use. At the same time large amounts of food wastes accumulate near the work places, residential complexes etc. polluting the air due to putrefaction. The need of the hour lies in finding innovative solutions for dye removal from wastewater streams. In this context, the article emphasizes adoption or conversion of food waste materials, an ecological nuisance, as adsorbents for the removal of dyes from wastewaters. Adsorption, being a well-established technique, the review critically examines the specific potential of food waste constituents as dye adsorbents. The efficacy of food waste-based adsorbents is examined, besides addressing the possible adsorption mechanisms and the factors affecting phenomenon such as pH, temperature, contact time, adsorbent dosage, particle size, and ionic strength. Integration of information and communication technology approaches with adsorption isotherms and kinetic models are emphasized to bring out their role in improving overall modeling performance. Additionally, the reusability of adsorbents has been highlighted for effective substrate utilization. The review makes an attempt to stress the valorization of food waste materials to remove dyes from contaminated waters thereby ensuring long-term sustainability.

Cellulose-Silver Composites Materials: Preparation and Applications

Cellulose has received great attention owing to its distinctive structural features, exciting physico-chemical properties, and varied applications. The combination of cellulose and silver nanoparticles currently allows to fabricate different promising functional nanocomposites with unique properties. The current work offers a wide and accurate overview of the preparation methods of cellulose-silver nanocomposite materials, also providing a punctual discussion of their potential applications in different fields (i.e., wound dressing, high-performance textiles, electronics, catalysis, sensing, antimicrobial filtering, and packaging). In particular, different preparation methods of cellulose/silver nanocomposites based on in situ thermal reduction, blending and dip-coating, or additive manufacturing techniques were thoroughly described. Hence, the correlations among the structure and physico-chemical properties in cellulose/silver nanocomposites were investigated in order to better control the final properties of the nanocomposites and analyze the key points and limitations of the current manufacturing approaches.

Nanocellulose-Based Materials for Water Treatment: Adsorption, Photocatalytic Degradation, Disinfection, Antifouling, and Nanofiltration

Nanocelluloses are promising bio-nano-materials for use as water treatment materials in environmental protection and remediation. Over the past decades, they have been integrated via novel nanoengineering approaches for water treatment processes. This review aims at giving an overview of nanocellulose requirements concerning emerging nanotechnologies of waster treatments and purification, i.e., adsorption, absorption, flocculation, photocatalytic degradation, disinfection, antifouling, ultrafiltration, nanofiltration, and reverse osmosis. Firstly, the nanocellulose synthesis methods (mechanical, physical, chemical, and biological), unique properties (sizes, geometries, and surface chemistry) were presented and their use for capturing and removal of wastewater pollutants was explained. Secondly, different chemical modification approaches surface functionalization (with functional groups, polymers, and nanoparticles) for enhancing the surface chemistry of the nanocellulose for enabling the effective removal of specific pollutants (suspended particles, microorganisms, hazardous metals ions, organic dyes, drugs, pesticides fertilizers, and oils) were highlighted. Thirdly, new fabrication approaches (solution casting, thermal treatment, electrospinning, 3D printing) that integrated nanocelluloses (spherical nanoparticles, nanowhiskers, nanofibers) to produce water treatment materials (individual composite nanoparticles, hydrogels, aerogels, sponges, membranes, and nanopapers) were covered. Finally, the major challenges and future perspectives concerning the applications of nanocellulose based materials in water treatment and purification were highlighted.

Fabrication and characterization of a water purification system using activated carbon and graphene nanoplatelets: Toward the development of a nanofiltration matrix

Researchers are trying to tackle water scarcity in numerous ways. One of those ways is the use of nanotechnology in water processing and purification. The current work involves the fabrication and optimization of activated carbon and graphene-based hybrid water purification system. Five different concentrations of methylene blue and deionized water (DI) dye solutions were used, and they were filtered in three different cycles. For the potential usage on the consumer side, a small-scale, low-cost water filter is developed using activated carbon, commercial filter paper, and graphene nanoplatelets. The filter paper is used to hold mixtures of the activated carbon and graphene nanoplatelets within the water filter. The conductivity, TDS, and pH are measured for the feed water and the processed water using an Oakton EcoTestr and Apera Instruments PH60 Premium Pocket pH meter, respectively. A UV-Vis spectrometer is used to measure the absorption of solutions. The distribution and adsorption of the dye particles were observed by scanning electron microscopy. PRACTITIONER POINTS: These results show the effectiveness of the system in the removal of dye particles above a given particle size. The concentration of the dye solution decreased after every cycle. The GnPs filtration system more effectively dye particles as compared to the filtration system containing only Activated carbon. UV-Vis spectroscopy results showed that the methylene blue dye particles decreased after every cycle. This research can open a broad area of projects toward waste/wastewater practice for particles above a certain particle size.

Ionic chitosan/silica nanocomposite as efficient adsorbent for organic dyes

A new adsorbent from chitosan and anionic silica was prepared by ionic interaction followed by sol-gel process. The obtained nanocomposite was characterized by different techniques: FTIR, XRD, SEM/EDX, TGA, and TEM. The results showed that silica precursor interacts with chitosan and deposits as regular spherical nanoparticles. The methylene blue (MB) adsorption by chitosan/silica nanocomposite achieved the adsorption equilibrium within 60 min. The adsorption method is fitted to the pseudo-second-order kinetic model and the Langmuir adsorption model with a maximum adsorption capacity of 847.5 mg/g at slight alkaline solution. Chitosan/silica composite displayed high regeneration capability and recovery of MB up to five cycles without the loss of the adsorption efficiency. The current study showed that as-prepared chitosan/silica nanocomposite is an appropriate material for the adsorption of organic pollutants from wastewater.

Recent progress in preparation and applications of chitosan/calcium phosphate composite materials

Studying the development of unique materials from sustainable and renewable resources has gained increasing concern due to the depletion of fossil resources. Chitosan and its derivatives have been considered as versatile candidates for preparing attractive materials. The fabrication of chitosan/calcium phosphate composite compounds has received much attention for the development of numerous promising products in different fields. In this short review, recent preparation strategies for chitosan/calcium phosphate composites such as freeze casting, vacuum-assisted filtration, and biomimetic mineralization were discussed. The review presented their advances for diverse applications such as bone tissue engineering implants, drug delivery, wound healing, dental caries, as well adsorption of organic and heavy metals from polluted water. The challenges and future perspectives for the application of chitosan/calcium phosphate materials in biomedical and environmental applications were also involved in this review article.

Microcrystalline Cellulose from Groundnut Shell as Potential Adsorbent of Crystal Violet and Methylene Blue. Kinetics, Isotherms and Thermodynamic Studies

The isolation of microcrystalline cellulose from a groundnut shell is reported. Adsorption experiments were carried out for the removal of cationic crystal violet and methylene blue and it follows Langmuir model. Positive enthalpy and negative free energy changes have shown endothermic and favorable processes. The results reflect good adsorption process.

Effective adsorption of methylene blue by biodegradable superabsorbent cassava starch-based hydrogel

Superabsorbent hydrogels were synthesized from cassava starch (CS) and polyacrylamide (PAM) via radical polymerization. Scanning electron microscope revealed the porous structure of the hydrogels. Pore size was smaller at higher CS contents. Hydrogel containing 50 wt% CS (CS50) showed excellent water absorbency of >8000%, which was much greater than that of CS0 (pure PAM) hydrogel. This CS50 hydrogel removed >85% of methylene blue (MB) in <10 h with the greatest adsorption capacity of 2000 mg MB/g. The experimental results fitted the Freundlich and pseudo-second order models. After 4 cycles of use, the hydrogel could still remove >50% of MB in solution. Interestingly, the hydrogels were photodegradable and biodegradable. Buried in soil, the CS50 hydrogel was 80% degraded within 30 days whereas pure PAM was only 22% degraded.

Cross-linking of poly(dimethylaminoethyl methacrylate) by phytic acid: pH-responsive adsorbent for high-efficiency removal of cationic and anionic dyes

A new high-efficiency adsorbent for cationic and anionic dyes named PAGD was synthesized via polymerization of dimethylaminoethyl methacrylate by employing glycidyl-methacrylate-modified phytic acid as a cross-linker. The experiment demonstrated that PAGD is pH-sensitive, and the maximum adsorption capacities of anionic dye Reactive Red 24 (RR24) and cationic dye Fuchsin Basic (FB) were 1871.23 and 482.54 mg g⁻¹, respectively. To the best of our knowledge, there has been no previous report on a dye adsorbent possessing an adsorption capacity of over 465 mg g⁻¹ for RR24. The excellent adsorption abilities toward RR24 are due to the introduced phytic acid groups, which could promote protonation of tertiary amine groups under acid pH conditions. Moreover, PAGD is able to selectively remove RR24 in a mixed solution of cationic dye and RR24. The adsorption isotherms and kinetics of PAGD fit well with the Langmuir isotherm and pseudo-second-order kinetic model, respectively. These results imply that PAGD is a promising adsorbent for removal of both cationic and anionic dyes.

The adsorbent PADG based on phytic acid and DMAEMA was synthesized and tested, which is pH-sensitive and shows high adsorption capacities for anionic and cationic dyes.

New chitosan/silica/zinc oxide nanocomposite as adsorbent for dye removal

Chitosan/silica hybrid was used for zinc oxide (ZnO) nanoparticles immobilization to form chitosan/silica/ZnO nanocomposite. This nanocomposite was utilized to eliminate methylene blue (MB) from wastewater. The effect of ZnO immobilization on the adsorption properties of the nanocomposite was studied in details. The best interpretation for the equilibrium data was given by Langmuir isotherm, and the highest adsorption capacity of MB reached to 293.3 mg/g in slight basic medium. As an effective and low-cost adsorbent, chitosan/silica/ZnO nanocomposite is expected to have a promising future for adsorption of organic dyes from their aqueous solutions.

Fabrication of a cost-effective lemongrass (Cymbopogon citratus) membrane with antibacterial activity for dye removal

Dye wastewater has attracted much attention due to its severe environmental and health problems. The main challenge of separating dyes from wastewater, using adsorption, is developing a functional adsorbent that is cost-effective and sustainable. In this work, we have fabricated a novel low-cost membrane with antibacterial properties from naturally sustainable lemongrass (LG). Lemongrass was cut and milled into powder, then dissolved to prepare a lemongrass membrane. Graphene oxide (GO) was also included to prepare a LG/GO composite membrane. The physiochemical and antibacterial properties of membranes were evaluated and their dye adsorption capability was examined using methylene blue (MB) dye at different concentrations. The kinetic study revealed that the MB adsorption process complied with the pseudo second-order model. The lemongrass membrane showed a rough surface morphology, high reduced modulus and hardness, yet comparable dye adsorption to the LG/GO composite membrane. Considering the natural sustainability of lemongrass as an abundant cellulosic resource, its excellent dye adsorption, antibacterial properties and low cost as well as the facile fabrication technology, the lemongrass membrane could be a promising candidate for dye removal from wastewater with easy separation after use.

Dye wastewater has caused severe environmental and health problems. In this work, we have fabricated a novel low-cost membrane with good methylene blue dye adsorption and antibacterial property from naturally sustainable lemongrass (Cymbopogon citratus).

Synergistic effects of ion exchange and complexation processes in cysteine-modified clinoptilolite nanoparticles for removal of Cu(ii) from aqueous solutions in batch and continuous flow systems

In this work, clinoptilolite tuff was pre-treated and converted to microparticles (CMP) and nanoparticles (CNP) by a mechanical method.

In situ synthesis of hierarchical structured cotton fibers/MnO2 composites: a versatile and recyclable device for wastewater treatment

Hierarchical structured cotton fiber–MnO₂ composites were prepared by a new two-step strategy “ion exchange–redox reaction”.