High electrocapacitive performance of bowl-like monodispersed porous carbon nanoparticles prepared with an interfacial self-assembly process

The chloroperoxidase immobilized on porous carbon nanobowls for the detection of trichloroacetic acid by electroenzymatic synergistic catalysis

Trichloroacetic acid (TCA), as a by-product of chlorination disinfection, is a highly carcinogenic chemical. Due to the widespread use of chlorination disinfection, it is critical to detect TCA in drinking water to decrease the incidence of disease. In this work, we developed an efficient TCA biosensor via electroenzymatic synergistic catalysis. The porous carbon nanobowls (PCNB) are prepared and wrapped by an amyloid like proteins formed by phase-transitioned lysozyme (PTL-PCNB), then, chloroperoxidase (CPO) is abounding to PTL-PCNB owing to its strong adhesion. The ionic liquid of 1-ethyl-3-methylimidazolium bromide (ILEMB) is co-immobilized on PTL-PCNB to from CPO-ILEMB@PTL-PCNB nanocomposite to assist the direct electron transfer (DET) of CPO. The PCNB plays two roles here. In addition, to increasing the conductivity, it serves as an ideal support for holding CPO; The CPO-ILEMB@PTL-PCNB nanocomposite modified electrode presents high efficiency for sensing TCA. Through electroenzymatic synergistic catalysis, a wide detection range of 33 μmol L-1 to 98 mmol L-1 can be achieved with a low detection limit of 5.9 μmol L-1, and high stability, selectivity as well as reproducibility, which ensures its potential practical applicability. This work provides a new platform for the electro-enzyme synergistic catalysis in one pot.

Tandem Efficient Bromine Removal and Silver Recovery by Resorcinol-Formaldehyde Resin Nanoparticles

Halogen wastewater greatly threatens the health of human beings and aquatic organisms due to its severe toxicity, corrosiveness, and volatility. Efficient bromine removal is therefore urgently required, while existing Br₂-capture materials often face challenges from limited water stability and possible halogen leaking. We report a facile and efficient aqueous Br₂ removal method using submicron resorcinol-formaldehyde (RF) resin nanoparticles (NPs). The abundant aromatic groups dominate the Br₂ removal by substitution reactions. An excellent Br₂ conversion capacity of 7441 mg g_RF^-1 was achieved by RF NPs that outperform state-of-the-art materials by ∼2-fold, along with advantages including good water stability, low cost, and easy fabrication. Two recycling-coupled (electrochemical or H₂O₂-involved) Br₂ removal routes further reveal the feasibility of in-depth halogen removal by RF NPs. The brominated resin can be downstream upcycled for silver recovery, realizing the harvesting of precious metal, reducing of heavy-metal pollution, and resource utilization of brominated resin.

Recent Progress on Asymmetric Carbon- and Silica-Based Nanomaterials: From Synthetic Strategies to Their Applications

HIGHLIGHTS

The synthetic strategies and fundamental mechanisms of various asymmetric carbon- and silica-based nanomaterials were systematically summarized. The advantages of asymmetric structure on their related applications were clarified by some representative applications of asymmetric carbon- and silica-based nanomaterials. The future development prospects and challenges of asymmetric carbon- and silica-based nanomaterials were proposed.

ABSTRACT

Carbon- and silica-based nanomaterials possess a set of merits including large surface area, good structural stability, diversified morphology, adjustable structure, and biocompatibility. These outstanding features make them widely applied in different fields. However, limited by the surface free energy effect, the current studies mainly focus on the symmetric structures, such as nanospheres, nanoflowers, nanowires, nanosheets, and core–shell structured composites. By comparison, the asymmetric structure with ingenious adjustability not only exhibits a larger effective surface area accompanied with more active sites, but also enables each component to work independently or corporately to harness their own merits, thus showing the unusual performances in some specific applications. The current review mainly focuses on the recent progress of design principles and synthesis methods of asymmetric carbon- and silica-based nanomaterials, and their applications in energy storage, catalysis, and biomedicine. Particularly, we provide some deep insights into their unique advantages in related fields from the perspective of materials’ structure–performance relationship. Furthermore, the challenges and development prospects on the synthesis and applications of asymmetric carbon- and silica-based nanomaterials are also presented and highlighted. [Image: see text]

Interfacial Assembly of Nanowire Arrays toward Carbonaceous Mesoporous Nanorods and Superstructures

Synthesis of anisotropic carbonaceous nano- and micro-materials with well-ordered mesoporous structures has attracted increasing attention for a broad scope of applications. Although hard-templating method has been widely employed, overcoming the viscous forces to prepare anisotropic mesoporous materials is particularly challenging via the universal soft-templating method, especially from sustainable biomass as a carbon resource. Herein, the synthesis of biomass-derived nanowire-arrays based mesoporous nanorods and teeth-like superstructures is reported, through a simple and straightforward polyelectrolyte assisted soft-templating hydrothermal carbonization (HTC) approach. A surface energy induced interfacial assembly mechanism with the synergetic interactions between micelles, nanowire, nanorods, and polyelectrolyte is proposed. The polyelectrolyte acts not only as a stabilizer to decrease the surface energy of cylindrical micelles, nanowires and nanorods, but also as a structure-directing agent to regulate the oriented attachment and anisotropic assembly of micelles, nanowires, and nanorods. After a calcination treatment, the carbon nanorod and teeth-like superstructure are successfully coupled with Ru to directly produce supported catalysts for the hydrogen evolution reaction, exhibiting much better performance than the isotropic nanospheres based catalyst. This HTC approach will open up new avenues for the synthesis of anisotropic materials with various morphologies and dimensions, expanding the palette of materials selection for many applications.

0.2 V Electrolysis Voltage-Driven Alkaline Hydrogen Production with Nitrogen-Doped Carbon Nanobowl-Supported Ultrafine Rh Nanoparticles of 1.4 nm

The development of highly effective and low-cost electrocatalysts for energy-saving hydrogen production via water splitting is still a great challenge. Herein, porous nitrogen-doped carbon nanobowls (N-CBs) have been designed and used for the controlled growth of ultrafine rhodium (Rh) nanoparticles. With the aid of interfacial bonding of Rh and N, ultrafine Rh nanoparticles with an average size of 1.4 nm have been successfully immobilized on the N-CBs. This Rh/N-CB electrocatalyst shows superior activity and high stability for the hydrogen evolution reaction (HER) and the hydrazine oxidation reaction (HzOR). More importantly, the Rh/N-CBs exhibit high activity for hydrogen production from water electrolysis, marking with a cell voltage of 0.2 V to achieve a current density of 20 mA cm^-2 when they serve as cathodic electrocatalysts for the HER and anodic electrocatalysts for the HzOR in 1 M KOH with 0.5 M hydrazine. The density functional theory calculations demonstrate that a near-zero hydrogen adsorption free energy produced by the chemical bonding of Rh with the pyrrole-N doped in N-CBs is responsible for the excellent HER activity of Rh/N-CBs electrocatalysts.

Direct Laser Writing-Assisted Method for Template-Free Fabrication of Biomass-Based Porous Carbon Platelets with Uniform Size and Arbitrarily Designed Shapes

Because of a wide range of applications of porous carbon platelets (PCPs), a robust method for their facile synthesis/fabrication with controlled porous structure, size, and shape is constantly needed. Herein, we report a simple and scalable method for producing PCPs with uniform size and arbitrarily designed shapes. This approach relies on CO₂ laser irradiation to induce carbonization of a biomass composite sheet formed by the infusion of sodium lignosulfonate into a cellulose paper to create porous carbon features with arbitrarily designed shapes. Upon subsequent water immersion treatment, the laser-written carbon features could spontaneously detach to form freestanding PCPs. The PCPs of different shapes were fabricated, characterized, and demonstrated for their potential applications in dye adsorption, as flexible sensors, and as miniaturized supercapacitors. Our method is expected to make great impacts in multiple fields, such as environment, energy storage, sensing, catalysis, and so forth.

Interface self-assembly preparation of multi-element doped carbon nanobowls with high electrocatalysis activity for oxygen reduction reaction

Developing an efficient, stable and low cost oxygen reduction reaction electrocatalyst is desirable for fuel cells and metal-air batteries. Here, we have successfully prepared multi-element doped carbon nanobowls by simply mixing the porous carbon nanobowls and sulfur doped graphitic carbon nitride quantum dots in FeCl₃ solution and subsequent high temperature treatment processes. Compared with the commercial Pt/C electrocatalyst, the multi-element doped carbon nanobowls display a comparable half-wave potential of 0.82 V, much larger limiting diffusion current density (0.4-0.8 V), better methanol-tolerance and higher long-term stability for the oxygen reduction reaction in alkaline media. The robust three-dimensional porous structure of carbon nanobowls and multiple active centers derived from Fe, N, S and O co-doping are responsible for the excellent performance. This work suggests that such multi-element doped carbon nanobowls can be a promising alternative for Pt-based catalysts in fuel cells.

Facile synthesis of mesoporous carbon microspheres/graphene composites in situ for application in supercapacitors

MCMG were in situ synthesized via a soft template method and subsequent thermal reduction by using CTAB as structure-directing agent, AMP and GO as carbon sources. As-prepared MCMG samples exhibited excellent electrochemical performances.