Non-metal photocatalyst nitrogen-doped carbon nanotubes modified mpg-C(3)N(4):facile synthesis and the enhanced visible-light photocatalytic activity

Enhanced photocatalytic performance of CuS/O,N-CNT composite for solar-driven organic contaminant degradation

Herein, a hydrothermal etching approach was used to generate an innovative CuS/O,N-CNT composite. The hydrothermal etching of g-C3N4 led to the creation of O,N-CNT, with ethanol as the oxygen source. The SEM and TEM characterizations confirmed the formation of CNT, whereas the XPS analysis proved the doping of oxygen and nitrogen in the CNT matrix along with the incorporation of CuS. Under sun irradiation, the produced CuS/O,N-CNT showed outstanding photocatalytic efficiency, eliminating methyl orange and methylene blue dyes with 97.21% and 98.11% efficacy, respectively. Adding hydrothermally etched O,N-CNT increased light absorption and charge migration kinetics, as can be studied from the UV-DRS and PL analysis; hence, the observed improvements in light absorption and charge transfer pathways contributed to the CuS/O,N-CNT composite's enhanced photocatalytic activity, indicating its potential for efficient elimination of organic contaminants under solar irradiation. The catalyst demonstrated high reusability performance up to six cycles and significantly degraded other dyes. Scavenger analysis, along with VB-XPS and UV-DRS analysis, aid in developing a photocatalytic mechanism that confirms the participation of hydroxyl and superoxide radicals in the degradation process.

Surface-Activated Ti3C2Tx Adsorption of Acetylene Black Coupled with Polyaniline as a Signal Tag for the Detection of the ESAT-6 Antigen of Mycobacterium tuberculosis

Early secretory antigenic target-6 (ESAT-6) is regarded as the most immunogenic protein produced by Mycobacterium tuberculosis, whose detection is of great clinical significance for tuberculosis diagnosis. However, the detection of the ESAT-6 antigen has been hampered by the expensive cost and complex experimental procedures, resulting in low sensitivity. Herein, we developed a titanium carbide (Ti3C2Tx)-based aptasensor for ESAT-6 detection utilizing a triple-signal amplification strategy. First, acetylene black (AB) was immobilized on Ti3C2Tx through a cross-linking reaction to form the Ti3C2Tx-AB-PAn nanocomposite. Meanwhile, AB served as a conductive bridge, and Ti3C2Tx can synergistically promote the electron transfer of PAn. Ti3C2Tx-AB-PAn exhibited outstanding conductivity, high electrochemical signals, and abundant sites for the loading of ESAT-6 binding aptamer II (EBA II) to form a novel signal tag. Second, N-CNTs were adsorbed on NiMn layered double hydride (NiMn LDH) nanoflowers to obtain NiMn LDH/N-CNTs, exhibiting excellent conductivity and preeminent stability to be used as electrode modification materials. Third, the biotinylated EBA (EBA I) was immobilized onto a streptavidin-coated sensing interface, forming an amplification platform for further signal enhancement. More importantly, as a result of the synergistic effect of the triple-signal amplification platform, the aptasensor exhibited a wide detection linear range from 10 fg mL-1 to 100 ng mL-1 and a detection limit of 4.07 fg mL-1 for ESAT-6. We envision that our aptasensor provides a way for the detection of ESAT-6 to assist in the diagnosis of tuberculosis.

Hexagonal-borocarbonitride (h-BCN) based heterostructure photocatalyst for energy and environmental applications: A review

Formulation of heterojunction with remarkable high efficiency by utilizing solar light is promising to synchronously overcome energy and environmental crises. In this concern, hexagonal-borocarbonitride (h-BCN) based Z-schemes have proved potential candidates due to their spatially separated oxidation and reduction sites, robust light-harvesting ability, high charge pair migration and separation, and strong redox ability. H-BCN has emerged as a hotspot in the research field as a metal-free photocatalyst with a tunable bandgap range of 0-5.5 eV. The BCN photocatalyst displayed synergistic benefits of both graphene and boron nitride. Herein, the review demonstrates the current state-of-the-art in the Z-scheme photocatalytic application with a special emphasis on the predominant features of their photoactivity. Initially, fundamental aspects and various synthesis techniques are discussed, including thermal polymerization, template-assisted, and template-free methods. Afterward, the reaction mechanism of direct Z-scheme photocatalysts and indirect Z-scheme (all-solid-state) are highlighted. Moreover, the emerging Step-scheme (S-scheme) systems are briefly deliberated to understand the charge transfer pathway mechanism with an induced internal electric field. This review critically aims to comprehensively summarize the photo-redox applications of various h-BCN-based heterojunction photocatalysts including CO₂ photoreduction, H₂ evolution, and pollutants degradation. Finally, some challenges and future direction of h-BCN-based Z-scheme photocatalyst in environmental remediation are also proposed.

Recent Advances in g-C3N4-Based Materials and Their Application in Energy and Environmental Sustainability

Graphitic carbon nitride (g-C₃N₄), with facile synthesis, unique structure, high stability, and low cost, has been the hotspot in the field of photocatalysis. However, the photocatalytic performance of g-C₃N₄ is still unsatisfactory due to insufficient capture of visible light, low surface area, poor electronic conductivity, and fast recombination of photogenerated electron-hole pairs. Thus, different modification strategies have been developed to improve its performance. In this review, the properties and preparation methods of g-C₃N₄ are systematically introduced, and various modification approaches, including morphology control, elemental doping, heterojunction construction, and modification with nanomaterials, are discussed. Moreover, photocatalytic applications in energy and environmental sustainability are summarized, such as hydrogen generation, CO₂ reduction, and degradation of contaminants in recent years. Finally, concluding remarks and perspectives on the challenges, and suggestions for exploiting g-C₃N₄-based photocatalysts are presented. This review will deepen the understanding of the state of the art of g-C₃N₄, including the fabrication, modification, and application in energy and environmental sustainability.

Supramolecular Precursor Strategy to Construct g-C3N4/Silica Hybrid Nanosheets for Photocatalytic Degradation of Dye and Antibiotic Pollutants

To construct a highly active g-C₃N₄ (CN)/silica hybrid nanosystem, the supramolecular precursor strategy of introducing melamine-cyanuric acid (MCA) by synergistically using micromolecular melamine (m) and urea (u) for CN nanostructure construction on the silica nanosheets (SiNSs) surface was researched. The results showed that the introduction of MCA supramolecular aggregates promoted the generation of ordered CN nanostructures attached to SiNSs, and the morphology of the CN nanostructure could be regulated through the m/u mass ratio. When the ratio is equal to 1/30, a typical g-C₃N₄/silica hybrid nanosheet (mu-CN/SiNSs-3) was successfully prepared, which showed the ultra-high photocatalytic activity for Rhodamine B dye degradation within 25 min with an apparent rate constant of 0.186 min^-1, owing to the large surface area of highly dispersed and ordered CN nanosheets, a strong interaction between CN and SiNSs, high photogenerated carriers separation efficiency, and the more negative conduction band potential offering more active species of ¹O₂ and ^•O₂^-. Unexpectedly, the mu-CN/SiNSs-2 composite (m/u = 1/10) exhibited the highest activity for tetracycline antibiotic degradation, mainly due to the morphological advantage of a certain number of nanotubes generated on the CN/SiNSs hybrid nanosheets. It indicates that the supramolecular precursor strategy by synergistically using melamine and urea is highly efficient for the nanostructure construction of the CN/SiNSs hybrid system, enabling an appropriate nanostructure for the photodegradation of various pollutants.

Constructing novel graphitic carbon nitride-based nanocomposites - From the perspective of material dimensions and interfacial characteristics

Two-dimensional (2D) graphitic carbon nitride (g-C₃N₄), a fascinating metal-free conjugated polymer, has garnered immense interest in the fields of solar power generation and environmental remediation. The construction of g-C₃N₄-based nanocomposites with materials of various dimensions can further improve their photocatalytic activities by surface area enlargement, bandgap tuning, heterojunction formation, etc. In this paper, we comprehensively reviewed the design, synthesis, and functionalities of g-C₃N₄-based nanocomposites based on their applications in hydrogen evolution, CO₂ reduction, and pollutants removal. We provided detailed analyses on the integration of 2D g-C₃N₄ with zero-, one-, two-, and three-dimensional materials with a focus on their interfacial characteristics and functional improvement. This review aims to stimulate fresh ideas on the interfacial engineering of g-C₃N₄-based nanocomposites to broaden their future applications.

Investigation on visible-light photocatalytic performance and mechanism of zinc peroxide for tetracycline degradation and Escherichia coli inactivation

In this study, zincperoxide (ZnO₂) with broad energy gap was firstly used for visible-light-induced photocatalytic degradation of tetracycline (TC) and inactivation of Escherichia coli (E. coli). A small amount of ZnO₂ (10 mg) could efficiently degrade 100 mL of 50 mg/L TC in a wide pH range (4-12), and the degradation performance was rarely suppressed by common matrix species and natural water sources. Also, 100 mg/L ZnO₂ could inactivate around 7-log E. coli cells within 60 min under visible-light irradiation. Quenching experiments and electron paramagnetic resonance (EPR) results confirmed that superoxide radical (•O₂^-) and singlet oxygen (¹O₂) were the main reactive oxygen species (ROS), which were attributed to the self-sensitization of TC and the photoexcitation of released H₂O₂ under the catalysis of Zn(OH)₂ from the hydrolysis of partial ZnO₂, respectively. The pathways of TC degradation and processes of visible-light-induced TC degradation and E. coli inactivation were proposed and deduced in detail. This work presented the enhanced visible-light photocatalytic activities of ZnO₂ for antibiotic degradation and bacterial inactivation, and provided a deep insight into the mechanisms of visible-light-induced TC degradation andE. coli inactivation over ZnO₂.

The Synthesis of h-BN-Modified Z-Scheme WO3/g-C3N4 Heterojunctions for Enhancing Visible Light Photocatalytic Degradation of Tetracycline Pollutants

The photocatalytic performance of common photocatalysts is limited by their low surface area, insufficient absorption of light energy, and fast photogenerated electron-hole recombination rate. The introduction of Z-scheme photocatalysts decorated with hexagonal boron nitride (h-BN) has already been confirmed to be an effective way to extend the surface area and increase the charge separation, thereby enhancing the photocatalytic performance. In this study, a hexagonal boron nitride (h-BN)-decorated WO₃/g-C₃N₄ heterojunction photocatalyst was successfully synthesized via an in situ method using tungstic acid, melamine, and hexagonal boron nitride as the precursors. The physical and chemical properties of the resulting samples were thoroughly characterized. The surface, morphological, and optical properties of the resulting materials were thoroughly characterized by XRD, XPS, SEM, TEM, UV-vis DRS, BET surface areas, PL, and ESR analysis. The WO₃/g-C₃N₄/BN composite exhibited a much higher photocatalytic activity for tetracycline degradation under visible light irradiation than pure g-C₃N₄, WO₃, and BN. The favorable photocatalytic activity of WO₃/g-C₃N₄/BN composites can be ascribed to the increased surface area and enhanced separation efficiency of photogenerated electron-hole pairs by adding h-BN nanosheets and forming the WO₃/g-C₃N₄ heterojunction. This work indicates that the WO₃/g-C₃N₄/BN photocatalyst is a promising material in wastewater treatment.

Facile preparation of graphitic carbon nitride nanosheet/agar composite hydrogels for removal of tetracycline via the synergy of adsorption and photocatalysis

Compared with the BCN/agar composite hydrogel, the CNNS/agar 4 composite hydrogel exhibited a much higher photocatalytic activity for tetracycline degradation due to suppressive recombination of electrons and holes.

Impact of piezoelectric effect on the heterogeneous visible photocatalysis of g-C3N4/Ag/ZnO tricomponent

In recent years, the piezophotocatalytic mechanism had been intensively recognized as a potential and promising route to sewage treatment. Here we report the piezoelectric effect improved heterogeneous photocatalysis of g-C₃N₄/Ag/ZnO (g-CN/A/Z) tricomponent in rhodomine B (RhB) degradation. Initially, the nanomaterials were characterized for their physico-chemical and optoelectronic properties using analytical techniques such as x-ray diffraction (XRD), scanning & transmission electron microscopes (SEM & TEM), UV-vis spectrophotometer and photoluminescence spectroscopy (PL). In addition, the photoelectrochemical activity of determining the photocurrent density and electrochemical impendence response were also been conducted. The catalytic properties of the tricomponent, g-CN/A/Z was studied with the degradation of RhB with visible photons irradiation and ultrasonication. In piezophotocatalysis, degradation up to 89% of RhB was achieved with 1.26 folds synergetic effect on par to the photocatalysis and piezocatalysis.

Impact of Doping and Additive Applications on Photocatalyst Textural Properties in Removing Organic Pollutants: A Review

The effect of ion doping and the incorporation of additives on photocatalysts’ textural properties have been reviewed. Generally, it can be summarised that ion doping and additives have beneficial effects on photocatalytic efficiency and not all have an increase in the surface area. The excessive amount of dopants and additives will produce larger aggregated particles and also cover the mesoporous structures, thereby increasing the pore size (Pd) and pore volume (Pv). An excessive amount of dopants also leads to visible light shielding effects, thus influence photocatalytic performance. Ion doping also shows some increment in the surface areas, but it has been identified that synergistic effects of the surface area, porosity, and dopant amount contribute to the photocatalytic performance. It is therefore important to understand the effect of doping and the application of additives on the textural properties of photocatalysts, thus, their performance. This review will provide an insight into the development of photocatalyst with better performance for wastewater treatment applications.

Tin dioxide decorated on Ni-encapsulated nitrogen-doped carbon nanotubes for anodic electrolysis and persulfate activation to degrade cephalexin: Mineralization and degradation pathway

In this study, bamboo-shaped carbon nanotubes exhibiting high nitrogen content and Ni encapsulation (Ni@NCNT) were effectively synthesized by a simple pyrolysis method. The catalytic peroxydisulfate activation for cephalexin (CPX) degradation was investigated using the prepared material. SnO₂ was further decorated and fabricated on the anode material (SnO₂/Ni@NCNT) for electrochemical degradation of CPX in an aqueous solution. Transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy indicated that the SnO₂ nanoparticles were uniformly distributed on the surface of Ni@NCNT. Electrochemical characterization employing cyclic voltammetry and linear sweep voltammetry demonstrated that SnO₂/Ni@NCNT displayed higher oxygen evolution potential and electrocatalytic activity than Ni@NCNT. Mineralization of CPX in wastewater was performed using electrolysis coupled with persulfate oxidation. The analysis revealed a synergistic strengthening effect. The electropersulfate oxidation resulted in higher total organic carbon (TOC) removal (70.3%) than the sum of electrooxidation (48.1%) and persulfate oxidation (9.2%) toward CPX. This phenomenon might result from the regeneration of sulfate radicals (SO₄^•-) on the anode and complementary oxidation by SO₄^•- and OH. Persulfate oxidation alone was shown to result in low TOC removal, although CPX was mostly degraded. Additionally, the CPX degradation pathway involving electropersulfate oxidation was proposed and it is indicated that CPX molecules were completed decomposed by the examination of short chain acids, mineralized ions, and ecotoxicity evolution indicated that the antibiotic was completely degraded. This study provides a new approach for the design and preparation of novel electrode materials and electrochemical degradation facilities for the removal of pollutants via persulfate activation.

Nitrogen-doped Carbon Nanospheres-Modified Graphitic Carbon Nitride with Outstanding Photocatalytic Activity

Metals and metal oxides are widely used as photo/electro-catalysts for environmental remediation. However, there are many issues related to these metal-based catalysts for practical applications, such as high cost and detrimental environmental impact due to metal leaching. Carbon-based catalysts have the potential to overcome these limitations. In this study, monodisperse nitrogen-doped carbon nanospheres (NCs) were synthesized and loaded onto graphitic carbon nitride (g-C₃N₄, GCN) via a facile hydrothermal method for photocatalytic removal of sulfachloropyridazine (SCP). The prepared metal-free GCN-NC exhibited remarkably enhanced efficiency in SCP degradation. The nitrogen content in NC critically influences the physicochemical properties and performances of the resultant hybrids. The optimum nitrogen doping concentration was identified at 6.0 wt%. The SCP removal rates can be improved by a factor of 4.7 and 3.2, under UV and visible lights, by the GCN-NC composite due to the enhanced charge mobility and visible light harvesting. The mechanism of the improved photocatalytic performance and band structure alternation were further investigated by density functional theory (DFT) calculations. The DFT results confirm the high capability of the GCN-NC hybrids to activate the electron-hole pairs by reducing the band gap energy and efficiently separating electron/hole pairs. Superoxide and hydroxyl radicals are subsequently produced, leading to the efficient SCP removal.

Photophysical and photochemical insights of the photodegradation of norfloxacin: The rate-limiting step and the influence of Ca2+ ion

Photodegradation is one of the major degradation paths for antibiotics as aquatic micropollutants in surface water. The photodegradation involves a number of complicated photophysical and photochemical processes. Exploration for the rate-limiting step among these processes can be essential for the elimination of antibiotics. In this work norfloxacin was selected as a target compound. The rate constants of photophysical transitions and their competitions were discussed under the framework of Fermi Golden rule and time-depended perturbation theory. Using density functional theory, the reaction paths in triplet state were searched. The competitions among the photophysical transitions and photochemical reaction paths indicate the intersystem crossing (ISC) from the S₁ state to T₁ state is the rate-limiting step in the aquatic photodegradation of norfloxacin. Ca²⁺ ion significantly accelerates this bottleneck by coordinating with the carbonyl and carboxyl groups of norfloxacin. The coordination creates more ISC paths to triplet states and increases the spin-orbit coupling, Huang-Rhys factors, and the vibrational coupling of the ISCs.

Facile assembly of novel g-C3N4@expanded graphite and surface loading of nano zero-valent iron for enhanced synergistic degradation of tetracycline

The two-stage removal process of tetracycline (TC) in aqueous solutions using a novel photocatalyst based on nano-zero-valent iron (NZVI), g-C₃N₄ and expanded graphite by carbon layer (EGC) is reported for the first time. The composite (NZVI/g-C₃N₄@EGC) exhibits remarkable adsorption, reduction ability and visible light activity over the reaction course. Compared with pristine g-C₃N₄ (25.9%) and pure NZVI (45.9%), NZVI/g-C₃N₄@EGC achieves high degradation efficiency of TC (98.5%) due to the formation of a heterogeneous photo-Fenton system. This study shows that synergistic effects are achieved in the reaction system, including maintaining the reduction ability of NZVI and enhancing the photocatalytic activity of g-C₃N₄ by facilitating the separation of photogenerated electrons (e⁻) and holes (h⁺). TC removal involved a two-stage process of adsorption–reduction and photo-degradation. The quencher experiments determined that holes (h⁺) and superoxide radicals (˙O₂⁻) are the major reactive species in the degradation of TC. The degradation pathways of TC were proposed based on the analysis of the intermediates. In addition, NZVI/g-C₃N₄@EGC revealed a high stability in a five-cycle test and good magnetic properties for facile separation from aqueous solutions. From an application viewpoint, NZVI/g-C₃N₄@EGC has favorable prospects in the direction of the photocatalytic degradation of antibiotic wastewater.

The two-stage removal process of tetracycline (TC) in aqueous solutions using a novel photocatalyst based on nano-zero-valent iron (NZVI), g-C₃N₄ and expanded graphite by carbon layer (EGC) is reported for the first time.

Recyclable Visible Light-Driven O-g-C3N4/Graphene Oxide/N-Carbon Nanotube Membrane for Efficient Removal of Organic Pollutants

Organic pollutants are harmful to human health, which creates a global need for the development of novel and effective materials for efficiently removing contaminants. Accordingly, an efficient visible light-driven heterostructured membrane combined with oxygen-modified monolayer g-C₃N₄, graphene oxide, and nitrogen-doped carbon nanotubes (CNTs) (O-g-C₃N₄/GO/N-CNT) was successfully fabricated through electrostatic interactions and subsequent vacuum filtration. The results suggested that the O-g-C₃N₄/GO/N-CNT membrane exhibited higher degradation rate than those of O-g-C₃N₄/GO and pure O-g-C₃N₄ under visible light exposure. This enhanced photocatalytic performance was attributed to the introduction of GO and N-CNT, which acted as electronic acceptors for monolayer O-g-C₃N₄ that effectively inhibited recombination of photogenerated electron-hole pairs, thus enhancing visible light photocatalytic activity. Furthermore, the enrichment and degradation rates of O-g-C₃N₄/GO/N-CNT membranes were demonstrated for tetracycline hydrochloride, which were found to be 96.64 and 94.30%, respectively, and no distinct enrichment or catalytic activity reduction was observed when their reusability was measured. These results suggested that these recyclable O-g-C₃N₄/GO/N-CNT membranes provide a new strategy for the highly efficient removal of environmental pollutants.

The Promoting Role of Different Carbon Allotropes Cocatalysts for Semiconductors in Photocatalytic Energy Generation and Pollutants Degradation

Semiconductor based photocatalytic process is of great potential for solving the fossil fuels depletion and environmental pollution. Loading cocatalysts for the modification of semiconductors could increase the separation efficiency of the photogenerated hole-electron pairs, enhance the light absorption ability of semiconductors, and thus obtain new composite photocatalysts with high activities. Kinds of carbon allotropes, such as activated carbon, carbon nanotubes, graphene, and carbon quantum dots have been used as effective cocatalysts to enhance the photocatalytic activities of semiconductors, making them widely used for photocatalytic energy generation, and pollutants degradation. This review focuses on the loading of different carbon allotropes as cocatalysts in photocatalysis, and summarizes the recent progress of carbon materials based photocatalysts, including their synthesis methods, the typical applications, and the activity enhancement mechanism. Moreover, the cocatalytic effect among these carbon cocatalysts is also compared for different applications. We believe that our work can provide enriched information to harvest the excellent special properties of carbon materials as a platform to develop more efficient photocatalysts for solar energy utilization.