Preparation of black-pearl reduced graphene oxide–sodium alginate hydrogel microspheres for adsorbing organic pollutants

Revolutionizing wastewater treatment: A review on the role of advanced functional bio-based hydrogels

Water contamination poses a significant challenge to environmental and public health, necessitating sustainable wastewater treatment solutions. Adsorption is one of the most widely used techniques for purifying water, as it effectively removes contaminants by transferring them from the liquid phase to a solid surface. Bio-based hydrogel adsorbents are gaining popularity in wastewater treatment due to their versatility in fabrication and modification methods, which include blending, grafting, and crosslinking. Owning to their unique structure and large surface area, modified hydrogels containing reactive groups like amino, hydroxyl, and carboxyl, or functionalized hydrogels with inorganic nanoparticles particularly graphene nanomaterials, have demonstrated promising adsorption capabilities for both inorganic and organic contaminants. Bio-based hydrogels have excellent physicochemical properties and are non-toxic, environmentally friendly, and biodegradable, making them extremely effective at removing contaminants like heavy metal ions, dyes, pharmaceutical pollutants, and organic micropollutants. The versatility of hydrogels allows for various forms to be used, such as films, beads, and nanocomposites, providing flexibility in handling different contaminants like dyes, radionuclides, and heavy metals. Additionally, researchers also have shown the potential for recycling and regenerating post-treatment hydrogels. This approach not only addresses the challenges of wastewater treatment but also offers sustainable and effective solutions for mitigating water pollution.

Waste treats waste: Facile fabrication of porous adsorbents from recycled PET and sodium alginate for efficient dye removal

Dye-contaminated water and waste plastic both pose enormous threats to human health and the ecological environment, and simultaneously solving these two issues in a sustainable and resource-saving way is highly important. In this work, a sodium alginate-polyethylene terephthalate-sodium alginate (SA@PET) composite adsorbent for efficient dye removal is fabricated using wasted PET bottle and marine plant-based SA via simple and energy-efficient nonsolvent-induced phase separation (NIPS) method. Benefiting from its porous structure and the abundant binding sites, SA@PET shows an excellent methylene blue (MB) adsorption capacity of 1081 mg g-1. The Redlich-Peterson model more accurately describes the adsorption behavior, suggesting multiple adsorption mechanisms. In addition to the electrostatic attractions of SA to MB, polar interactions between the PET matrix and MB are also identified as adsorption mechanisms. It is worth mentioning that SA@PET could be recycled 7 times without a serious decrease in performance, and the trifluoroacetic acid-dichloromethane solvent involved in the NIPS process has the possibility of reuse and stepwise recovery. Finally, the discarded adsorbent could be completely degraded under mild conditions. This work provides not only a composite adsorbent with excellent cationic dye removal performance for wastewater treatment, but also an upcycling strategy for waste PET.

Functionalized Carbon Nanotubes Encapsulated Alginate Beads for the Removal of Mercury Ions: Design, Synthesis, Density Functional Theory Calculation, and Demonstration in a Batch and Fixed-Bed Process

Various nanomaterials have been envisaged mainly through batch studies for environmental remediation application. The real utilization of these new generation adsorbents in large scale pose a difficulty due to its low density and small size which makes it difficult for isolation after application. In this context, nanoadsorbents polymer composite beads can be seen as a way out. Here, functionalized CNTs (carbon nanotubes) have been fabricated into micro beads with sodium alginate. The alginate-functionalized CNT (Alg-f-CNT) beads were then comprehensively evaluated for batch and fixed-bed column separation of divalent mercury ions from an aqueous medium. The effects of process parameters such as pH, contact time, feed Hg2+ concentration, and temperature were studied. Simulation of the experimental data suggested that adsorption is an endothermic spontaneous process which follows the pseudo-second-order kinetic and Langmuir isotherm model. The desorption of the Hg2+ ion from used adsorbent was possible with 1 M HNO3. The breakthrough curves at different process parameters were investigated during fixed-bed column separation and found to be in good agreement with Thomas model. The regeneration and reusability of the adsorbent were tested up to five cycles without a significant decrease in the removal performance. Density functional theory studies revealed stronger interaction of Alg-f-CNT with Hg compared to free alginic acid and established the role of carboxyl and oxo groups present in the adsorbent in the coordination of the Hg2+ ions. The experimental results demonstrate that functionalized CNT-encapsulated alginate beads are a promising alternate material, which can be used to remove mercury in the fixed-bed column mode of the operation.

Alginate magnetic graphene oxide biocomposite synthesis for removal of aromatic amines from aqueous samples

In the present work, alginate magnetic graphene oxide biocomposite was synthesized for the removal and extraction of aromatic amines (aniline, p-chloroaniline (PCA), and p-nitroaniline (PNA)) from water samples. The biocomposite was investigated for its physiochemical characteristics such as surface morphology, functional groups, phase determination, and elemental composition. The results revealed that the functional groups of graphene oxide and alginate retained in biocomposite with magnetic properties. The biocomposite was applied to water samples for the removal and extraction of aniline, p-chloroaniline, and p-nitroaniline through adsorption process. The adsorption process was studied under various experimental conditions like time, pH, concentration, dose, and temperature, and all the parameters were optimized. The maximum adsorption capacities at room temperature have an optimum pH = 4 for aniline = 18.39 mg g^-1, for PCA = 17.13 mg g^-1, and for PNA = 15.24 mg g^-1. Kinetic and isotherm models showed that the experimental data is best fitted to pseudo-second-order kinetic model and the Langmuir isotherm model. Thermodynamic study suggested that the adsorption process is exothermic and spontaneous. Ethanol was found to be the best eluent for the extraction of all the three analytes suggested by the extraction study. The maximum percent recoveries from spiked water samples were calculated for aniline = 98.82%, PCA = 96.65%, and PNA = 93.55% which showed that alginate magnetic graphene oxide biocomposite could be a useful and ecofriendly adsorbent for the removal of organic pollutants in water treatment processes.

Efficient and selective use of functionalized material in the decontamination of water: removal of emerging micro-pollutants from aqueous wastes

The contamination of the aquatic environment with emerging micro-pollutants is a serious global concern. The aim of this investigation was to synthesize novel functionalized material (BNAPTES) precursor to natural bentonite in a single pot facile synthetic route. The material was utilized for efficient and selective removal of tetracycline (TC) and triclosan (TCS) in aqueous wastes. The grafting of silane was confirmed with the FT-IR (Fourier Transform Infra-Red) analysis and the EDX (Energy Dispersive X-ray) analysis showed the incorporation of amino group with the bentonite. The structural changes of clay due to silane grafting were studied with the help of XRD (X-ray Diffraction) and BET (Brunner-Emmett-Teller) surface area analyses. Batch adsorption studies showed that functionalized clay significantly increased the selectivity and adsorption capacity of bentonite for TC and TCS. The Langmuir monolayer adsorption capacity was found to be 15.36 and 17.15 mg/g for TC and TCS, respectively. The rapid uptake of TC and TCS by functionalized material followed pseudo-second-rate kinetics. Further, a total of 78% of TC and 73% of TCS were removed within 5 min of contact and the adsorption equilibrium was achieved within 120  min. The influence of background electrolytes and co-existing ions indicated that TC and TCS were selective towards BNAPTES. The loading capacities of the column packed with BNAPTES were found to be 56.00 and 44.42 mg/g for TC and TCS, respectively. Further, BNAPTES was found efficient even in real water treatment since the attenuation of TC and TCS was not affected significantly in the real water matrix.

Precise Printing of Microfiber Scaffold with Gelatin Methacryloyl (GelMA)/Polyethylene Oxide (PEO) Bioink

Gelatin methacryloyl scaffolds with microscale fiber structures own great significance because they can effectively mimic the extracellular matrix environment. Compared with extruding bioprinting, electrospinning technology is more suitable for establishing accurate hydrogel microfibers. However, electrospinning accurate gelatin methacryloyl microfiber remains a big challenge restricted by its bad spinnability. In this paper, polyethylene oxide, which owns promising spinnability, is added into gelatin methacryloyl hydrogel precursor to improve the spinnability of gelatin methacryloyl bioink. A three-dimensional motion platform for electrospinning is designed and built and the spinning process of microfibers under far-electric-field and near-electric-field conditions is systematically studied, respectively. As a result, scaffolds consisted of unordered and ordered microfibers are successfully fabricated under far-electric-field and near-electric field, respectively. In vitro culture experiments of human umbilical vein endothelial cells are carried out using the prepared gelatin methacryloyl microfiber scaffolds. The results show that the cells can easily attach to the microfibers and grow well. Moreover, the gelatin methacryloyl/ polyethylene oxide microfiber scaffold was directly spun on the polycaprolactone mesh scaffold printed by fused modeling printing method. The results showed that the macroscopic ordered and microscopic disordered microfiber scaffold could be successfully established, which could lead to directed cell growth. We believe that this method can effectively solve the problem of hydrogel spinnability and be a powerful tool for various biomedical engineering methods in the future.

Cellulose-based thermosensitive supramolecular hydrogel for phenol removal from polluted water

Pollution of phenolic effluent from spice and plastics factories has become increasingly serious. Thus, developing a green and highly efficient adsorbent to remove phenolic compounds from wastewater is of urgent need. In this study, cellulose graft copolymer was synthesized through grafting 4-vinylpyridine monomer and polyethylene glycol methacrylate to a molecular skeleton of cellulose by free radical polymerization. The supramolecular hydrogel was successfully synthesized by physical cross-linking of cellulose graft copolymer and α-cyclodextrin. These supramolecular hydrogels were thoroughly characterized and the adsorption performance (adsorption isotherms and adsorption kinetics) of phenol on the supramolecular hydrogel were investigated in batch operation. The supramolecular hydrogel not only exhibited excellent adsorption of phenol, but also demonstrated increased mechanical strength due to the introduction of a modified cellulose base material. The adsorption kinetics of phenol on the supramolecular hydrogel followed a quasi-second-order reaction, with a correlation coefficient of 0.9909. The adsorption isotherm conformed to the Langmuir adsorption isotherm, and the maximum adsorption capacity of phenol can reach 80.71 mg g^-1, which was 2-3 times higher than traditional carbon-based materials. The results demonstrate the great promise of the waste-derived supramolecular hydrogel to be used as an efficient adsorbent in wastewater treatment.

Adsorption of anionic dyes from textile wastewater utilizing raw corncob

Toxic dyes are irrefutable effluent components of textile wastewater, so they have become a major economic and health concern. With the purpose of efficient removal of textile dyes, multiple nature-inspired adsorbents have been applied. Herein, raw corncob is proposed as a novel highly efficient, low-price, and abundantly attainable adsorbent with the potential for uptake of methyl red and methyl orange. Multiple experiments were carried out to optimize parameters including pH, primary concentration, adsorbent dosage, temperature, and contact time. The adsorption was raised with the mounting of the contact time and it was alleviated with the addition of initial concentration. The foremost uptake of dye was apperceived at an acidic medium pH 4 for methyl red and pH 1 for methyl orange. Scanning Electron Microscopy and Fourier Transform Infrared Spectroscopy were employed to characterize the surfaces of corncobs. The well-fitted Langmuir and Freundlich models (methyl red: R² = 0.9956 and methyl orange: R² = 0.9883) confirmed the homogeneous monolayer adsorption process on the raw corncob surface. The obtained results disclose that corncob is an effectual biosorbent for eliminating anionic dyes without the necessity for any prior modifications.

Preparation of carboxymethyl cellulose/graphene composite aerogel beads and their adsorption for methylene blue

Carboxymethyl cellulose/ graphene composite aerogel beads (CMC/GAs) were prepared by the easily scaling-up method, i.e., wet spinning- environmental pressure drying method. The influences of the type and concentration of coagulating bath on the formation of aerogel beads were discussed, and the forming mechanism was analyzed. The CMC/GAs was characterized through SEM, XRD, FI-IR, Raman, XPS, electronic universal testing machine and other methods. The CMC/GAs-30 has an average particle size and a mean pore diameter of 3.83 mm and 82 μm, respectively. The analysis results indicated that the adsorption mechanisms of CMC/GAs on methylene blue (MB) are mainly through the electrostatic interaction. The adsorption process conforms to the Langmuir model (R² = 0.9964) and pseudo-second-order kinetic model (R² is higher than 0.99). When the particle size of CMC/GAs-30 decreases, the equilibrium adsorption capacity for MB increases. Under the experimental conditions explored, the Langmuir maximum adsorption capacity of CMC/GAs-30 for MB is 222.72 mg.g^-1. The CMC/GAs-30 show good recycle performance in MB adsorption. The removal rate of MB from water by CMC/GAs-30 remained at about 90% after 30-times adsorption- regeneration cycles.

Facile Synthesis of MOFs-Templated Carbon Aerogels with Enhanced Tetracycline Adsorption Performance

Three-dimensional aerogels have great potential for antibiotic removal from aqueous solution due to their excellent solution mass transfer channels and special morphology. Herein, the metal ions were bound with alginate to form alginate-Fe, alginate-Cu, and alginate-Fe-Cu hydrogels, then they were used as nucleation sites for metal organic framework (MOF) growth to obtain MAlgs gels, respectively. Considering the aqueous environmental stability of MOFs particles, the alginate and MOF particles in MAlgs aerogels were pyrolyzed as templates to obtain the derived carbon aerogel CMAlgs. The results showed that the adsorption capacity of MAlgs-Fe-Cu aerogel was higher than that of MAlg-Cu and MAlg-Fe aerogels, up to ~130 mg·g−1. The adsorption performance of carbon aerogel CMAlg-Cu decreased obviously because of the decrease of pore size and oxygen-containing functional groups. The adsorption process is a combination of physical adsorption and chemical adsorption. In addition, CMAlgs aerogels exhibit better recyclability than MAlgs aerogels. This work provides a new strategy for fabricating MOFs-templated in-situ grown carbon aerogels for water purification.

Graphene-based materials for metronidazole degradation: A comprehensive review

Due to its cytotoxic effect, metronidazole (MNZ) is a drug commonly used to treat bacterial, protozoal, and microaerophilic bacterial infections. After consumption, it undergoes a series of metamorphic reactions that lead to the degradation of oxidized, acetylated, and hydrolyzed metabolites in the environment. To eliminate such pollutants, due to their high potential, adsorption and photocatalysis extensive processes are used in which graphene can be used to improve efficiency. This review analyses the use of graphene as an absorbent and catalyst with a focus on absorption and photocatalytic degradation of MNZ by graphene-based materials (GBMs). The parameters affecting the adsorption, and photocatalytic degradation of MNZ are investigated and discussed. Besides, the basic mechanisms occurring in these processes are summarized and analyzed. This work provides a theoretical framework that can direct future research in the field of MNZ removal from aqueous solutions.

Efficient Congo Red Removal Using Porous Cellulose/Gelatin/Sepiolite Gel Beads: Assembly, Characterization, and Adsorption Mechanism

Porous sustainable cellulose/gelatin/sepiolite gel beads were fabricated via an efficient 'hydrophilic assembly-floating droplet' two-step method to remove Congo red (CR) from wastewater. The beads comprised microcrystalline cellulose and gelatin, forming a dual network framework, and sepiolite, which acted as a functional component to reinforce the network. The as-prepared gel beads were characterized using FTIR, SEM, XRD, and TGA, with the results indicating a highly porous structure that was also thermally stable. A batch adsorption experiment for CR was performed and evaluated as a function of pH, sepiolite addition, contact time, temperature, and initial concentration. The kinetics and isotherm data obtained were in agreement with the pseudo-second-order kinetic model and the Langmuir isotherm, with a maximum monolayer capacity of 279.3 mg·g^-1 for CR at 303 K. Moreover, thermodynamic analysis demonstrated the spontaneous and endothermic nature of the dye uptake. Importantly, even when subjected to five regeneration cycles, the gel beads retained 87% of their original adsorption value, suggesting their suitability as an efficient and reusable material for dye wastewater treatments.

Modern Carbon-Based Materials for Adsorptive Removal of Organic and Inorganic Pollutants from Water and Wastewater

Currently, a serious threat for living organisms and human life in particular, is water contamination with persistent organic and inorganic pollutants. To date, several techniques have been adopted to remove/treat organics and toxic contaminants. Adsorption is one of the most effective and economical methods for this purpose. Generally, porous materials are considered as appropriate adsorbents for water purification. Conventional adsorbents such as activated carbons have a limited possibility of surface modification (texture and functionality), and their adsorption capacity is difficult to control. Therefore, despite the significant progress achieved in the development of the systems for water remediation, there is still a need for novel adsorptive materials with tunable functional characteristics. This review addresses the new trends in the development of new adsorbent materials. Herein, modern carbon-based materials, such as graphene, oxidized carbon, carbon nanotubes, biomass-derived carbonaceous matrices-biochars as well as their composites with metal-organic frameworks (MOFs) and MOF-derived highly-ordered carbons are considered as advanced adsorbents for removal of hazardous organics from drinking water, process water, and leachate. The review is focused on the preparation and modification of these next-generation carbon-based adsorbents and analysis of their adsorption performance including possible adsorption mechanisms. Simultaneously, some weak points of modern carbon-based adsorbents are analyzed as well as the routes to conquer them. For instance, for removal of large quantities of pollutants, the combination of adsorption and other methods, like sedimentation may be recommended. A number of efficient strategies for further enhancing the adsorption performance of the carbon-based adsorbents, in particular, integrating approaches and further rational functionalization, including composing these adsorbents (of two or even three types) can be recommended. The cost reduction and efficient regeneration must also be in the focus of future research endeavors. The targeted optimization of the discussed carbon-based adsorbents associated with detailed studies of the adsorption process, especially, for multicomponent adsorbate solution, will pave a bright avenue for efficient water remediation.

Application of graphene-based materials for removal of tetracyclines using adsorption and photocatalytic-degradation: A review

Tetracyclines are extensively used to treat human and animal infectious diseases due to its effective antimicrobial activities. About 70-90% of its parent materials are released into the environment through urine and feces, implying they are the most frequently detected antibiotics in the environment with high ecological risks. Adsorption and photocatalysis have been promising techniques for the removal of tetracyclines due to effectiveness and efficiency. Graphene-based materials provide promising platforms for adsorptive and photocatalytic removal of tetracyclines from aqueous environment owning to distinctive remarkable physicochemical, optical, and electrical characteristics. Herein, we intensively reviewed the available literatures in order to provide comprehensive insight about the applications and mechanisms of graphene-based materials for removal of tetracyclines via adsorption and phototocatalysis. The synthesis methods of graphene-based materials, the tetracycline adsorption and photocatalytic-degradation conditions, and removal mechanisms have been extensively discussed. Finally concluding remarks and future perspectives have been deduced and recommended to stimulate further researches in the subject. The review study can be used as theoretical guideline for further researchers to improve the current approaches of material synthesis and application towards tetracyclines removal.

A facile synthesis of bismuth oxychloride-graphene oxide composite for visible light photocatalysis of aqueous diclofenac sodium

In this study, bismuth oxychloride/graphene oxide (BiOCl-GO) composite was fabricated by facile one pot hydrothermal method. The pure BiOCl and BiOCl-GO composite was characterized by X-ray diffraction, Transmission electron microscopy X-ray photoelectron spectroscopy and UV-Vis diffuse reflectance spectroscopy. The synthesized composite was then assessed for photocatalytic degradation of diclofenac sodium (DCF) in visible as well as direct solar light and UV irradiation. Results indicated that the photocatalytic removal efficiency of DCF was significantly affected by dose of catalysts, pH value and source of light. The results reveled that degradation efficiency of BiOCl-GO for DCF reduced from 100 to 34.4% with the increases in DCF initial concentration from 5 mg L^-1 to 25 mg L^-1. The solar light degradation of DCF using BiOCl-GO was achieved with apparent rate constant 0.0037 min^-1. The effect of scavengers study revealed that superoxide ions and holes were mainly responsible for DCF degradation. The regeneration study indicates that BiOCl-GO composite can be successfully recycled up to the five cycles. The study revealed the effectiveness of one pot hydrothermal method for the fabrication of BiOCl-GO composite.

Enhanced adsorption for the removal of antibiotics by carbon nanotubes/graphene oxide/sodium alginate triple-network nanocomposite hydrogels in aqueous solutions

Large-scale abuse of antibiotics has led to serious environmental problems. Some conventional adsorbents such as several biopolymer gels have poor adsorption performance and inadequate mechanical properties. In this paper, carbon nanotubes (CNTs) and graphene oxide (GO), were combined with sodium alginate (SA) to improve the adsorption performance and other properties of traditional adsorbents. With the help of hydrogen peroxide and l-cysteine (L-cys), carbon nanotubes/l-cysteine@graphene oxide/sodium alginate (CNTs/L-cys@GO/SA) triple-network composite hydrogels were prepared. Compared with traditional hydrogels and the double-network hydrogels that are currently being developed, these triple-network composite hydrogels can exploit their three-dimensional structure to improve their adsorption capacity. The independent triple-network structure increases the three-dimensional space, so there are more pores and pollutant adsorption sites to achieve the high-efficient removal of ciprofloxacin. And the adsorption capacity of CNTs/L-cys@GO/SA hydrogels can reach 181 mg g^-1 and 200 mg g^-1 at 25 °C and 15 °C respectively in weak acidity environment. In fact, CNTs/L-cys@GO/SA hydrogels show better property at low temperature. In addition, the thermal stability, mechanical properties and swelling ability of the triple-network hydrogels have also been improved. The independent multilayer network can retain the excellent properties of the original materials and make the internal space of hydrogels larger. These multinetwork hydrogels have great potential for removing pollutants from wastewater. In addition, the CNTs/L-cys@GO/SA hydrogels show the higher adsorption capacity of ciprofloxacin under the conditions of weak acidity, low temperature and low inorganic salt concentration, so the removal of ciprofloxacin by hydrogels can also be promoted by changing environmental conditions.

A novel Poly(vinyl alcohol) / carboxymethyl cellulose / yeast double degradable hydrogel with yeast foaming and double degradable property

A novel polyvinyl alcohol/carboxymethyl cellulose/yeast double degradable hydrogel was prepared with yeast as a foaming agent. The chemical structure of the hydrogel was characterized by FTIR and XPS. The micro-structure of the hydrogel was observed by SEM. The specific surface area and pore size of hydrogel were measured by BET. Methylene blue adsorption capacity of the hydrogels were investigated and the adsorption mechanism was explored. The biodegradability of double degradable hydrogel was investigated. The results showed that yeast was encapsulated in hydrogel by electrostatic action. With the addition of yeast, not only the specific surface area and average pore size of the hydrogel increased but also methylene blue maximum adsorption capacity of the double degradable hydrogel (110 ± 3.5 mg/g) was significantly higher than that of the hydrogel without yeast (57 ± 1.9 mg/g). The adsorption mechanism was dominated by chemical adsorption and was accompanied by biodegradable and electrostatic adsorption. The kinetic data were fitted to the pseudo-second-order kinetic model reasonably well. The introduction of yeast promoted the biodegradable of hydrogel and increased the degradation rate of polyvinyl alcohol in the material with a maximum degradation rate of 45 ± 2.8%.

κ-Carrageenan/Sodium alginate double-network hydrogel with enhanced mechanical properties, anti-swelling, and adsorption capacity

The abuse of antibiotics is becoming increasingly serious, particularly in offshore aquaculture areas. Double-network polymer gel has good prospects for environmental application for the removal of antibiotics. In this work, κ-Carrageenan/Sodium Alginate (κ-car/SA) double-network hydrogels were designed and synthesized with enhanced mechanical properties, anti-swelling, and adsorption capacity. It was found that the intermolecular interaction and viscosity tend to increase with the increasing concentration of κ-carrageenan. The swelling degree of the composite hydrogel in NaCl solution presented a decreasing trend with the increase of carrageenan. SA can effectively improve the mechanical properties of κ-carrageenan composite gel and enhance its compressive resistance and elasticity. Ciprofloxacin (CIP) was used as the model pollutant for testing the adsorption performance. The results show that the Langmuir-Freundlich isotherm model is more suitable for fitting the adsorption isotherm data of CIP on gel beads, which indicates that κ-car/SA hydrogels have heterogeneous surface and different binding sites. κ-car/SA composite double-network hydrogels exhibit excellent adsorption properties for CIP (229 mg/g). The optimal adsorption capacity of κ-car/SA composite hydrogels was obtained at pH 4, and the adsorption capacity of the hydrogels increased with increasing ion concentration. FTIR spectroscopy and the Zeta potential test analyses showed that the adsorption mechanism may be explained by hydrogen bonding and the electrostatic interactions between κ-car/SA composite hydrogels and CIP. The formation of the new double-network hydrogel provided good properties and development potential for the adsorption of antibiotic in water.

Facile preparation of self-assembled hydrogels constructed from poly-cyclodextrin and poly-adamantane as highly selective adsorbents for wastewater treatment

Self-assembled hydrogel materials constructed from cyclodextrin polymer (P-CD)/adamantane-modified poly acrylic acid (PAA-Ad) were designed and prepared via host-guest interactions. It was observed that the prepared supramolecular hydrogels had an interconnected three-dimensional porous network. In addition, the obtained hydrogels showed a recovery performance and it was confirmed that the host-guest interactions between β-cyclodextrin and adamantane were the main driving force for the formation of the hydrogels. The mechanical properties of the hydrogels could be adjusted by varying the concentrations of PAA-Ad. In particular, the prepared supramolecular hydrogels exhibited superior performances in water purification. The results demonstrated that the hydrogels possessed different mechanisms in the adsorption of the four typical poisonous organic dye molecules used, including bisphenol A (BPA), 4-aminoazobenzene (N-Azo), methylene blue (MB), and rhodamine B (RhB). The hydrogels mainly adsorbed N-Azo by host-guest interaction and adsorbed BPA by host-guest interaction and hydrogen bond synergy. They also adsorbed MB and RhB by hydrogen bonding and electrostatic interaction.

Giant Microgels with CO2-Induced On-Off, Selective, and Recyclable Adsorption for Anionic Dyes

Adsorbents that are capable of controllable pollutants adsorption and release without secondary pollution are attractive in water treatment. Here, we propose eco-friendly CO₂ as a trigger to switch the charge states and collapse-expansion transition of giant microgels consisting of hydrophilic acrylamide and hydrophobic 2-(diethylamino)ethyl methacrylate and demonstrated the on-off, selective, and recyclable adsorption of anionic dyes on microgels under CO₂ stimulation. Apart from easy-handling separation from the water by a simple filtration process, the maximum adsorption capacity is as high as 821 mg g^-1, and the adsorption isotherms and kinetics obeyed Langmuir isotherm and the pseudo-second-order kinetics models, respectively. The anionic dye can also be separated from the mixture solution using CO₂-treated microgels. Moreover, a wastewater treatment prototype with microgel-packed column was fabricated. Under continuous flow condition, the dye was removed and recovered by alternative bubbling CO₂ and flushing with aqueous alkali (pH 12). Thus, this type of microgels with CO₂-induced protonation-deprotonation transition can serve as a cost-effective, environmentally friendly, and efficient adsorbent for water purification applications.

Three-dimensional graphene-based adsorbents in sewage disposal: a review

A kind of graphene functional materials based on three-dimensional (3D) porous structure is a new star for environmental application in the past decades because it not only inherits the perfect carbon crystal structure of two-dimensional (2D) graphene sheets but also exhibits several advantages such as extremely low density, high porosity, and big surface area, all which enable diverse contaminants to easily access and diffuse into 3D networks, and make these materials ideal adsorbents with superior adsorptivity and recyclability. This review aims to summarize the recent progress in constructing 3D graphene-based adsorbents (3DGBAs) with two hybrid systems such as graphene/polymers and graphene/inorganic nanomaterials, and to provide a fundamental understanding of synthetic methods for interconnecting these nanostructures, structure-property relationships, and extensive applications in environmental protection towards adsorption of heavy metals, dyes, oils, and organic pollutants. Furthermore, we make a forecast on the future development opportunities and technical challenges, which is hoped to make an inspiration for the researchers to exploit a new family of graphene-based adsorption materials. Graphical abstract ᅟ.

Graphene Oxide/BiOCl Nanocomposite Films as Efficient Visible Light Photocatalysts

A novel graphene oxide/BiOCl (GO/BiOCl) nanocomposite film was prepared via a spread coating method. In visible-light photocatalytically degrading Rhodamine B (RhB) experiments, 2 wt% GO/BiOCl could degrade 99% of RhB within 1.5 h and the rate constant was 12.2 times higher than that of pure BiOCl. The degradation efficiency still kept at 80% even after 4 recycles, evidencing the relatively good recyclability. The enhancement was attributed to the improvement of visible light adsorption and charge separation. Holes and superoxide radicals· O2- played a major role as reactive species. The values of conduction band and valence band for GO and BiOCl were calculated and a new photocatalytic mechanism of GO/BiOCl nanocomposite was proposed.