Functional modification of breathable polyacrylonitrile/polyurethane/TiO2 nanofibrous membranes with robust ultraviolet resistant and waterproof performance

Multifunctional polyacrylonitrile-SiO2/TiO2 hollow particle nanofibrous membranes with robust ultraviolet resistance and antibacterial effect

Encapsulation of triethoxyoctylsilane-modified SiO2/TiO2 hollow particles (M-HPs) in polyacrylonitrile (PAN) nanofibrous membranes achieves robust ultraviolet (UV) resistance (UPF value of 1529.31) and broad-spectrum antibacterial effects, surpassing the performance of commercial solid TiO2 nanoparticles.

Fabrication of Waterborne Silicone-Modified Polyurethane Nanofibers for Nonfluorine Elastic Waterproof and Breathable Membranes

Waterproof and breathable membranes have a huge market demand in areas, such as textiles and medical protection. However, existing fluorinated nanofibrous membranes, while possessing good waterproof and breathable properties, pose health and environmental hazards. Consequently, fabricating fluorine-free, eco-friendly waterborne membranes by integrating outstanding waterproofing, breathability, and robust mechanical performance remains a significant challenge. Herein, we successfully prepared waterborne silicone-modified polyurethane nanofibrous membranes with excellent elasticity, waterproofing, and breathability properties through waterborne electrospinning, using a small quantity of poly(ethylene oxide) as a template polymer and in situ doping of the poly(carbodiimide) crosslinking agent, followed by a simple hot-pressing treatment. The silicone imparted the nanofibrous membrane with high hydrophobicity, and the crosslinking agent enabled its stable porous structure. The hot-pressing treatment (120 °C) further reduced the pore size and improved the water resistance. This environmentally friendly nanofibrous membrane showed a high elongation at break of 428%, an ultra-high elasticity of 67.5% (160 cycles under 400% tensile strain), an air transmission of 13.2 mm s-1, a water vapor transmission rate of 5476 g m-2 d-1, a hydrostatic pressure of 51.5 kPa, and a static water contact angle of 137.9°. The successful fabrication of these environmentally friendly, highly elastic membranes provides an important reference for applications in healthcare, protective textiles, and water purification.

Use of Electrospinning for Sustainable Production of Nanofibers: A Comparative Assessment of Smart Textiles-Related Applications

Textile production is a major component of the global industry, with sales of over USD 450 billion and estimations of an 84% increase in their demand in the next 20 years. In recent decades, protective and smart textiles have played important roles in the social economy and attracted widespread popularity thanks to their wide spectrum of applications with properties, such as antimicrobial, water-repellent, UV, chemical, and thermal protection. Towards the sustainable manufacturing of smart textiles, biodegradable, recycled, and bio-based plastics are used as alternative raw materials for fabric and yarn production using a wide variety of techniques. While conventional techniques present several drawbacks, nanofibers produced through electrospinning have superior structural properties. Electrospinning is an innovative method for fiber production based on the use of electrostatic force to create charged threads of polymer solutions. Electrospinning shows great potential since it provides control of the size, porosity, and mechanical resistance of the fibers. This review summarizes the advances in the rapidly evolving field of the production of nanofibers for application in smart and protective textiles using electrospinning and environmentally friendly polymers as raw materials, and provides research directions for optimized smart fibers in the future.

Tri-Layered Bicomponent Microfilament Composite Fabric for Highly Efficient Cold Protection

Functional thin fabric with highly efficient cold protection properties are attracting the great attention of long-term dressing in a cold environment. Herein, a tri-layered bicomponent microfilament composite fabric comprised of a hydrophobic layer of PET/PA@C6 F13 bicomponent microfilament webs, an adhesive layer of LPET/PET fibrous web, and a fluffy-soft layer of PET/Cellulous fibrous web is designed and also successfully been fabricated through a facile process of dipping, combined with thermal belt bonding. The prepared samples exhibit a large resistance to wetting of alcohol, a high hydrostatic pressure of 5530 Pa, and brilliant water slipping properties, owing to the presence of dense micropores ranging from 25.1 to 70.3 µm, as well as to the smooth surface with an arithmetic mean deviation of surface roughness (Sa) ranging from 5.112 to 4.369 µm. Besides, the prepared samples exhibited good water vapor permeability, and a tunable CLO value ranging from 0.569 to 0.920, in addition to the fact that it exhibited a very suitable working temperature range of -5 °C to 15 °C. Additionally, it also showed excellent clothing tailorability including high mechanical strength with a remarkably soft texture and lightweight foldability that suitable for cold outdoor clothing applications.

Polyacrylonitrile/UV329/titanium oxide composite nanofibrous membranes with enhanced UV protection and filtration performance

Ultraviolet (UV) radiation is extremely dangerous to humans and can contribute to immunosuppression, erythema, early ageing and skin cancer. UV protection finishing may greatly influence the handling and permeability of fabrics, while UV-proof fibres can guarantee close contact between UV-resistant agents and fabric without affecting the handling of the fabric. In this study, polyacrylonitrile (PAN)/UV absorber 329 (UV329)/titanium dioxide (TiO₂) composite nanofibrous membranes with complex, highly efficient UV resistance were fabricated via electrospinning. UV329 was included in the composite to further strengthen the UV resistance properties via absorption function, while TiO₂ inorganic nanoparticles were added to provide UV shielding function. The presence of UV329 and TiO₂ in the membranes was confirmed using Fourier-transform infrared spectroscopy, which also showed the absence of chemical bonds between PAN and the anti-UV agents. The PAN/UV329/TiO₂ membranes exhibited a UV protection factor of 1352 and a UVA transmittance of 0.6%, which indicate their extraordinary UV resistance properties. Additionally, filtration performance was investigated in order to expand the application field of the UV-resistant PAN/UV329/TiO₂ membranes, and the composite nanofibrous membranes showed a UV filtration efficiency of 99.57% and a pressure drop of 145 Pa. The proposed multi-functional nanofibrous membranes have broad application prospects in outdoor protective clothing and window air filters.

Colorless, Transparent, and High-Performance Polyurethane with Intrinsic Ultraviolet Resistance and Its Anti-UV Mechanism

Polyurethane (PU) is a widely used polymer material that will age under prolonged exposure to ultraviolet (UV) light, shortening the service life. Several methods have been used to prepare the anti-UV PU, including adding nonreactive anti-UV additives, functional fillers, and biological antioxidant molecules. However, the nonreactive anti-UV additives may migrate during long-term use, the functional fillers may damage the mechanical properties and seriously reduce the light transmittance of the sample, and the biological antioxidant molecules will inevitably color the sample. To solve these problems, in this work, a benzotriazole UV absorber (Chiguard R-455) was introduced into the PU molecular chains by in situ polymerization to prepare the nonmigrating intrinsic anti-UV PU sample with high performance and colorless transparency. The anti-UV PU samples exhibit light transmittance of over 88% in the visible range and superior mechanical properties with tensile strength higher than 65 MPa and elongation at break higher than 900%. After 24 h UV irradiation (200 W, 365 nm), the tensile strength and elongation at break of pure PU sample are significantly reduced to only 8.9 and 15.8% of the original one, respectively. On the contrary, the addition of Chiguard R-455 will endow the PU sample with excellent anti-UV performance. After 24 h UV irradiation, the tensile strength (67.2 ± 1.6 MPa) and elongation at break (917.4 ± 30.0%) of PU-0.5% (the content of Chiguard R-455 is only 0.5 wt %) have changed little compared with the sample without irradiation (67.4 ± 3.5 MPa and 919.4 ± 26.5%). Additionally, the anti-UV mechanism of the PU sample is systematically studied. This work provides a feasible method for preparing colorless, transparent, high-performance, nonmigrating intrinsic UV-shielding PU samples, which can be used as a UV light-shielding material in various fields with visible and aesthetic requirements, such as protection fields and wearable products.

Acid and alkali-resistant fabric-based triboelectric nanogenerator for self-powered intelligent monitoring of protective clothing in highly corrosive environments

The corrosion of materials severely limits the application scenarios of triboelectric nanogenerators (TENGs), especially in laboratories, chemical plants and other fields where leakage of chemically corrosive solutions is common. Here, we demonstrate a chemical-resistant triboelectric nanogenerator (CR-TENG) based on polysulfonamide (PSA) and polytetrafluoroethylene (PTFE) non-woven fabrics. The CR-TENG can stably harvest biological motion energy and perform intelligent safety protection monitoring in a strong corrosive environment. After treatment with strong acid and alkali solution for 7 days, the fabric morphology, diameter, tensile properties and output of CR-TENG are not affected, showing high reliability. CR-TENG integrated into protective equipment can detect the working status of protective equipment in real time, monitor whether it is damaged, and provide protection for wearers working in high-risk situations. In addition, the nonwoven-based CR-TENG has better wearing comfort and is promising for self-powered sensing in harsh environments.

Electrospun Nanofibrous Membranes: A Versatile Medium for Waterproof and Breathable Application

Waterproof and breathable membranes that prevent liquid water penetration, while allowing air and moisture transmission, have attracted significant attention for various applications. Electrospun nanofiber materials with adjustable pore structures, easily tunable wettability, and good pore connectivity, have shown significant potential for constructing waterproof and breathable membranes. Herein, a systematic overview of the recent progress in the design, fabrication, and application of waterproof and breathable nanofibrous membranes is provided. The various strategies for fabricating the membranes mainly including one-step electrospinning and post-treatment of nanofibers are given as a starting point for the discussion. The different design concepts and structural characteristics of each type of waterproof and breathable membrane are comprehensively analyzed. Then, some representative applications of the membranes are highlighted, involving personal protection, desalination, medical dressing, and electronics. Finally, the challenges and future perspectives associated with waterproof and breathable nanofibrous membranes are presented.

Photocatalytic Degradation of Methylene Blue and Ortho-Toluidine Blue: Activity of Lanthanum Composites LaxMOy (M: Fe, Co, Ni)

Lanthanum (La) nanocomposites LaFeO3, LaNiO3, and LaCoO3 were synthesized using a sol-gel method, and different La to-metal (Fe, Ni, or Co) ratios were attained using various concentrations of salts. The resulting composites were calcined at 540 °C and characterized by XRD, SEM-EDX, FT-IR spectroscopy, XPS, thermogravimetric analysis (TGA), and PL spectroscopy. The activity of the lanthanum composites (LaFeO3, LaNiO3, and LaCoO3) was studied using the photocatalytic degradation of methylene blue (MB) and ortho-toluidine blue (o-TB) under visible light with a wavelength below 420 nm. The change in the concentration of dyes was monitored by using the UV-Vis spectroscopy technique. All composites appeared to have some degree of photocatalytic activity, with composites possessing an orthorhombic crystal structure having higher photocatalytic activity. The LaCoO3 composite is more efficient compared with LaFeO3 and LaNiO3 for both dyes. High degradation percentages were observed for the La composites with a 1:1 metal ratio.

Recent advances in superhydrophobic polyurethane: preparations and applications

Even though polyurethane (PU) has been widely applied, its superhydrophobicity is inadequate for certain applications. As such, the development of superhydrophobic polyurethane (SHPU) has recently attracted significant attention, with numerous motivating reports in recent years. However, a comprehensive review that summarizes these state-of-the-art developments remains lacking. Thus, this review aims to fill up this gap by reviewing the recent preparation methods for SHPU based on superhydrophobic theories and principles. Three main types of methods used in promoting the hydrophobicity of PU are emphasized in this review; (1) incorporation of silicide or fluoride to lower the surface energy, (2) creation of micro/nano-scale rough surfaces by electrospinning or grafting of nanoparticles, and (3) integrating the earlier two methods to develop a synergistic approach. Furthermore, this review also discussed the various applications of SHPU in oil spill treatment, protective coating, self-healing materials and sensors.

Recent Progress in Protective Membranes Fabricated via Electrospinning: Advanced Materials, Biomimetic Structures, and Functional Applications

Electrospinning is a significant micro/nanofiber processing technology and has been rapidly developing in the past 2 decades. It has several applications, including advanced sensing, intelligent manufacturing, and high-efficiency catalysis. Here, multifunctional protective membranes fabricated via electrospinning in terms of novel material design, construction of novel structures, and various protection requirements in different environments are reviewed. To achieve excellent comprehensive properties, such as, high water vapor transmission, high hydrostatic pressure, optimal mechanical property, and air permeability, combinations of novel materials containing nondegradable/degradable materials and functional structures inspired by nature have been investigated for decades. Currently, research is mainly focused on conventional protective membranes with multifunctional properties, such as, anti-UV, antibacterial, and electromagnetic-shielding functions. However, important aspects, such as, the properties of electrospun monofilaments, development of "green electrospinning solutions" with high solid content, and approaches for enhancing adhesion between hydrophilic and hydrophobic layers are not considered. Based on this systematic review, the development of electrospinning for protective membranes is discussed, the existing gaps in research are discussed, and solutions for the development of technology are proposed. This review will assist in promoting the diversified development of protective membranes and is of great significance for fabricating advanced materials for intelligent protection.

Electrospun Nanofibers Revisited: An Update on the Emerging Applications in Nanomedicine

Electrospinning (ES) has become a straightforward and customizable drug delivery technique for fabricating drug-loaded nanofibers (NFs) using various biodegradable and non-biodegradable polymers. One of NF's pros is to provide a controlled drug release through managing the NF structure by changing the spinneret type and nature of the used polymer. Electrospun NFs are employed as implants in several applications including, cancer therapy, microbial infections, and regenerative medicine. These implants facilitate a unique local delivery of chemotherapy because of their high loading capability, wide surface area, and cost-effectiveness. Multi-drug combination, magnetic, thermal, and gene therapies are promising strategies for improving chemotherapeutic efficiency. In addition, implants are recognized as an effective antimicrobial drug delivery system overriding drawbacks of traditional antibiotic administration routes such as their bioavailability and dosage levels. Recently, a sophisticated strategy has emerged for wound healing by producing biomimetic nanofibrous materials with clinically relevant properties and desirable loading capability with regenerative agents. Electrospun NFs have proposed unique solutions, including pelvic organ prolapse treatment, viable alternatives to surgical operations, and dental tissue regeneration. Conventional ES setups include difficult-assembled mega-sized equipment producing bulky matrices with inadequate stability and storage. Lately, there has become an increasing need for portable ES devices using completely available off-shelf materials to yield highly-efficient NFs for dressing wounds and rapid hemostasis. This review covers recent updates on electrospun NFs in nanomedicine applications. ES of biopolymers and drugs is discussed regarding their current scope and future outlook.

Waterborne electrospinning of fluorine-free stretchable nanofiber membranes with waterproof and breathable capabilities for protective textiles

HYPOTHESIS

Smart membranes with robust liquid water resistance and water vapor transmission capabilities have attracted growing attentions in personal protective equipment and environmental protection. However, current fluorine-free waterproof and breathable nanofibrous membranes are usually prepared through toxic solvent-based electrospinning, which raises great concerns about their environmental impacts.

EXPERIMENTS

We develop environmentally friendly fluorine-free polyurethane nanofibrous membranes with robust waterproof and breathable performances via waterborne electrospinning without post-coating treatment. The incorporation of the low surface energy long-chain alkyls and polycarbodiimide crosslinker imparts the interconnective porous channels with high hydrophobicity to waterborne fluorine-free polyurethane nanofibrous membranes.

FINDINGS

The waterborne fluorine-free nanofibrous membranes show high water contact angle of 137.1°, robust hydrostatic pressure of 35.9 kPa, desirable water vapor transmission rate of 4885 g m^-2 d^-1, excellent air permeability of 19.9 mm s^-1, good tensile elongation of 372.4%, and remarkable elasticity of 56.9%, thus offering strong potential for protective textiles and leaving no toxic solvent residues. This work could also serve as a guide for the design of green and high-performance fibrous materials used for medical hygiene, wearable electronics, water desalination, and oil/water separation.

In-situ electrospinning of thymol-loaded polyurethane fibrous membranes for waterproof, breathable, and antibacterial wound dressing application

Skin-like flexible membrane with excellent water resistance and moisture permeability is an urgent need in the wound dressing field to provide comfort and protection for the wound site. Despite efforts that have been made in the development of waterproof and breathable (W&B) membranes, the in-situ electrospinning of W&B membranes suitable for irregular wound surfaces as wound dressings still faces huge challenges. In the current work, a portable electrospinning device with multi-functions, including adjustable perfusion speed for a large range from 0.05 mL/h to 10 mL/h and high voltage up to 11 kV, was designed. The thymol-loaded ethanol-soluble polyurethane (EPU) skin-like W&B nanofibrous membranes with antibacterial activity were fabricated via the custom-designed device. Ultimately, the resultant nanofibrous membranes composed of EPU, fluorinated polyurethane (FPU), and thymol presented uniform structure, robust waterproofness with the hydrostatic pressure of 17.6 cm H₂O, excellent breathability of 3.56 kg m^-2 d^-1, the high tensile stress of 1.83 MPa and tensile strain of 453%, as well as high antibacterial activity. These results demonstrate that the new-type device has potential as a portable electrospinning apparatus for the fabrication of antibacterial membranes directly on the wound surface and puts a new way for the development of portable electrospinning devices.

Multifunctional modification of cotton using layer-by-layer finishing with chitosan, sodium lignin sulphonate and boric acid

Functionally modified fabrics produced using sustainable techniques are in huge demand in today's world. In the present work, cotton fabric was modified using layer-by-layer two-stage finishing method using a solution of chitosan in citric acid (CS) and sodium lignin sulphonate (SLS) with boric acid (BA), thus granting several performance traits like wrinkle-free, antibacterial, flame retardant, UV protection and antioxidant properties. The finished fabric was evaluated for several textile properties like tensile strength, bending length, crease recovery, whiteness index and functional properties like antibacterial activity, UV protection, flame retardancy and antioxidant properties under standard conditions. The finished cotton showed an increase in CRA, antibacterial activity in the range 70-89%, UPF in the excellent range, much higher LOI values with a decrease in heat release and antioxidant activity of higher than 93%. The novel method of multifunctional finishing of cotton by layer-by-layer technique is explored.

One-step synthesis of core shell cellulose-silica/n-octadecane microcapsules and their application in waterborne self-healing multiple protective fabric coatings

Exploiting water-based fabric coatings outfitted with multiple protections (e.g., waterproofness, ultraviolet (UV) resistance and thermal insulation) are urgently demanded. Nevertheless, achieving the multifunction and durability poses the major challenge. In the present study, novel multifunctional cellulose/silica hybrid microcapsules were developed by one-step emulsion-solvent diffusion; these microcapsules were well dispersed into waterborne silicone resins to form waterborne multiple protective fabric coatings. Since the encapsulated phase change materials were in the core of capsules, and the hydrophobic coupling reagent and UV absorber were grafted onto the silicas in the shell of capsules, these fabric coatings exhibited high superhydrophobicity, UV protection and thermal insulation. Moreover, because hydrophobic coupling reagent and UV absorber in the shell-cellulose of capsules exhibited easy mobility, the fabric coatings displayed self-repairability of superhydrophobicity and UV protection even after being damaged chemically or mechanically. The fabric coating presented in this study could have a range of applications, covering special protective fabric, high-altitude garments as well as self-cleaning materials.

A review on the preparation, characterization and potential application of perovskites as adsorbents for wastewater treatment

Perovskite are among the popular materials utilized in many areas of modern industrialization because of their low price, high stability, excellent oxidation activity, adsorptive, catalytic, optical, magnetic, electronic and ferroelectric properties. Over the years, widespread usage of perovskite nanoparticles has been reported due to its various applications which include an environmental catalyst, fuel cells, chemical sensors, magnetic materials, oxygen permeable membranes and adsorbents for wastewater treatment. Various synthetic methods such as the sol-gel method, proteic method, Pechini method, combustion, co-precipitation, and chelating precursor method have been applied in producing perovskites. Therefore, this review assembles the current knowledge on the processes involved in the preparation of perovskites, their characterizations and potential applications in wastewater treatment. Challenges and future opportunities of perovskite-based materials are discussed as well as obstacles against their extensive uses. Conclusions have also been drawn proposing a few suggestions for future research.

Facile fabrication of fluorine-free breathable poly(methylhydrosiloxane)/polyurethane fibrous membranes with enhanced water-resistant capability

HYPOTHESIS

Ideal breathable and waterproof materials contain two key elements: hydrophobic matrix and small pore size. Current high-performing breathable waterproof membranes usually employ fluorinated materials to construct hydrophobic surface, which possess alarming potential environmental hazards. Fluorine-free waterproof agents through coating treatment to obtain hydrophobicity suffer from complicated fabrication process and poor durability. Hence, non-fluorinated chemicals incorporated into fibers via a facile one-step electrospinning may be an effective approach to attain durable hydrophobic membranes.

EXPERIMENTS

Poly(methylhydrosiloxane)/polyurethane (PMHS/PU) solution with various PMHS concentration was formulated and electrospun to fibrous membranes, followed by a facile thermal treatment process. A systematic study including morphologies, porous structure, and surface wettability was performed. Breathable waterproof performance and tensile strength were also investigated.

FINDINGS

Added PMHS imparted mighty hydrophobicity to the membranes with a water contact angle of 130.2°, and the subsequent heat treatment greatly improved waterproofness, meanwhile doubled the tensile strength. The resultant membranes exhibited robust hydrostatic pressure of 54.1 kPa, medium breathability of 9.5 kg m^-2 d^-1, and excellent stretching stress of 14.1 MPa, which can meet the requirements of general use. The presented strategy on membrane fabrication is feasible and scalable, which may be considered as an effective remedy for environmental protection.

UV-shielding alginate films crosslinked with Fe3+ containing EDTA

In this study, we fabricated a soft, transparent UV-shielding film (Alg-Fe³⁺-EDTA) by crosslinking sodium alginate with a ferric ion solution containing EDTA. The obtained films were characterized via SEM, ATR-FTIR, XRD, TG and DTG; the results indicated that the synergistic gelation of ferric alginate and alginic acid existed in Alg-Fe³⁺-EDTA film. The Alg-Fe³⁺-EDTA film performance to be optimized under the following conditions: 1.6% Fe³⁺, 0.8% EDTA, and crosslinking duration of 12 min. The Alg-Fe³⁺-EDTA film had high visible light transmittance, the UV-C (200-280 nm) and UV-B (280-315 nm) shielding rates were 100%, and the UV-A (315-400 nm) shielding rate was 98.37%; the UPF reached 50+; additionally, the tensile strength and elongation-at-break were 56.85 MPa and 10.45%, respectively, and still have ultraviolet shielding effect under water environments or after strong light irradiation. This work provides an efficient method to improve the optical and mechanical ability of ferric alginate films.

Fabric Composites Reinforced with Thermally Bonded and Irregularly Aligned Filaments: Preparation and Puncture Resistant Performance

This study proposes fabric composites with improved static and dynamic puncture via increasing a friction force to restrain the slide of filaments as well as the compression and abrasion between the fibers and the puncture probe. The the bi-layered shell layers of composite fabrics are composed of aramid staple fibers and nylon staple fibers and a layer of low-melting-point polyester (LPET). The nonwoven layer consisting of recycled aramid and nylon staple fibers provides a shear effect to dissipate part of the puncture energy. Reinforcing interlayers include a woven fabric and PET filaments that are circularly aggregated between the surface layers, providing isotropic filament reinforcement and strengthening the resistance against the tip of the puncture probe. The reinforcing filaments may slide after the employment of needle punching, and to compensate for this disadvantage, the LPET layers are used to thermal bond the composite fabrics and the total thickness is controlled at 2 mm. The thermally bonded fabric composites are evaluated in terms of puncture resistance, thereby examining the effects of fabric structure and thermal bonding. According to the test results, the optimal composite structure is the sample N/L/W/F/L/N, which was reinforced by the LPET adhesive layer and irregularly aligned filaments. The sample which used the LPET adhesive layer had a positive influence on static puncture resistance and dynamic puncture resistance, preventing the slide of filaments, but the poor interfacial combination only contributed to limited reinforcement.

Photocatalytically Stable Superhydrophobic and Translucent Coatings Generated from PDMS-Grafted-SiO2/TiO2@PDMS with Multiple Applications

In this paper, we present a highly efficient, cost-effective, and widely applicable functionalized SiO₂/TiO₂-polymer based coating to fabricate a translucent, fluorine-free, chemically stable, photocatalytic active, self-healable superhydrophobic coating, which consisted of two mixed functionalized particles (MFP) and polydimethylsiloxane (PDMS) in a proper ratio. Both SiO₂ and TiO₂ powders were functionalized with PDMS brushes to achieve superhydrophobicity. To maximally optimize its properties, including superhydrophobicity, transparency, and photocatalytic activity, the ratios between MFP with PDMS were carefully studied and optimized. Glass slides coated with this mixed coating (MC) showed translucence with a transparency of 75%. It also presented superior photocatalytic activity and strong UV resistance that could repeatedly degrade organic oil pollutants as many as 50 times, while still maintaining superhydrophobicity even upon exposure to UV light with a high intensity of 80 mW/cm² for as long as 36 h. When low-surface-tension oils such as dodecane wetted the MC surface, it showed excellent slippery performance and could quickly repel strong acid/alkali/hot water and even very corrosive liquids such as aqua regia. MC achieved extremely stable underoil superhydrophobicity (toward liquids including water, strong acid and base, hot water, etc.) and self-cleaning properties, not only in oils at room temperature but also in a scalded oil environment. Moreover, MC showed self-healable performance after recycled plasma treatment. The stainless steel mesh coated with MC was also used to highly efficiently separate oil-water mixtures. Moreover, harsher liquids including strong acid/alkali solutions/hot water/ice water-oil mixtures could also be successfully separated by the coated mesh. This coating was believed to largely broaden both indoor and outdoor applications for superhydrophobic surfaces.

Waterproof and Breathable Electrospun Nanofibrous Membranes

Waterproof and breathable (W&B) membranes combine fascinating properties of resistance to liquid water penetration and transmitting of water vapor, playing a key role in addressing problems related to health, resources, and energy. Electrospinning is an efficient and advanced way to construct nanofibrous materials with easily tailored wettability and adjustable pore structure, therefore providing an ideal strategy for constructing W&B membranes. In this review, recent progress on electrospun W&B membranes is summarized, involving materials design and fabrication, basic properties of electrospun W&B membranes associated with waterproofness and breathability, as well as their applications. In addition, challenges and future trends of electrospun W&B membranes are discussed.

Synthesis of fibrous LaFeO3 perovskite oxide for adsorption of Rhodamine B

The LaFeO₃ perovskite oxide decorated active carbon fibers (LFO-ACFs) based on cotton fabric waste were successfully synthesized through sol-gel loading and thermal treatment. LaFeO₃ perovskite and cotton fabric waste were combined to an eco-friendly and cheap adsorbent, which could reuse the leftover materials of textile industry and realize their functional modification. The structural, morphology/microstructure and functional groups were investigated through X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), Fourier Transform Infrared spectroscopy (FTIR), respectively. The XRD pattern suggested the cotton fabric matrix didn't influence the structure of LaFeO₃ perovskite oxide. In SEM studies, LFO-ACFs still maintained fibrous shape of the raw cotton fibers, and the EDX analysis showed that the main elements of the prepared LFO-ACFs were La, Fe, O and C. The synthesized LFO-ACF was employed for adsorption of cational dye of Rhodamine B (RhB), and the effects of adsorption parameters, i.e. pH, contact time, solution temperature and initial concentration of dye, on adsorption behavior were investigated. Results suggested the adsorption performance of LFO-ACF for RhB was nearly not affected by solution pH and its maximum adsorption capacity fitted by the Langmuir isothermal model could attain 182.6 mg/g at 293 K. The adsorption kinetics followed the pseudo-second-order equation and the regeneration of LFO-ACF could be well realized through an easy pyrolysis method.

Electrospun composite nanofibre fabrics containing green reduced Ag nanoparticles as an innovative type of antimicrobial insole

In this study, polyvinyl alcohol (PVA) nanofibrous membranes containing silver nanoparticles (Ag NPs) were successfully fabricated by the combination of electrospinning and a green reduction approach. Through the electrospinning technique, uniform and smooth nanofibres can be obtained, and the Ag NPs with a narrow size distributions are well dispersed in PVA nanofibres. The investigation indicates that the mass ratio of reductant tea polyphenols and AgNO₃ play a crucial role in controlling the size of the Ag NPs. More importantly, multi-layered fabrics with a layer of PVA/Ag NP nanofibrous membrane layered onto cotton substrates were developed and applied to shoe insoles. The fabricated shoe insoles with functionalized PVA nanofibres exhibit remarkable antimicrobial activity against both E. coli and S. aureus (i.e. antibacterial rate > 99%). The creation of such an encouraging fabric could establish a new optimization methodology for producing nanoengineered functional textiles.

This study aims to develop an antimicrobial insole with an electrospun nanofibre mat which contains green reduced Ag NPs by a facile fabrication method.

Recent Progress in Magnetron Sputtering Technology Used on Fabrics

The applications of magnetron sputtering technology on the surface coating of fabrics have attracted more and more attention from researchers. Over the past 15 years, researches on magnetron sputtering coated fabrics have been mainly focused on electromagnetic shielding, bacterial resistance, hydrophilic and hydrophobic properties and structural color etc. In this review, recent progress of the technology is discussed in detail, and the common target materials, technologies and functions and characterization of coated fabrics are summarized and analyzed. Finally, the existing problems and future prospects of this developing field are briefly proposed and discussed.

Human Skin-Like, Robust Waterproof, and Highly Breathable Fibrous Membranes with Short Perfluorobutyl Chains for Eco-Friendly Protective Textiles

Flexible smart membranes with superior waterproofness and extreme breathability are highly desirable for wearable uses. However, present waterproof and breathable materials suffer from limited performance efficiency, alarming environmental risks, and complicated fabrication procedures. We report on eco-friendly fibrous membranes with human skin-like, robust waterproof, and highly breathable capabilities that can be prepared via a facile electrospinning strategy. A novel polyurethane elastomer (C4FPU) possessing double-terminal short perfluorobutyl (-C₄F₉) chain is synthesized for the first time and incorporated into the polyurethane (PU) fiber matrix, endowing the membrane with mighty and durable hydrophobicity. Additionally, the employment of AgNO₃ greatly decreased the maximum pore size ( d_max), contributing to the dramatically enhanced waterproofness. The resulting PU/C4FPU/AgNO₃ fibrous membranes exhibit comprehensive properties of exceptional hydrostatic pressure (102.8 kPa), excellent water vapor transmission rate (12.9 kg m^-2 d^-1), high mechanical property (9.8 MPa), and significant antibacterial efficacy against Escherichia coli and Staphylococcus aureus. The successful synthesis of these intriguing membranes may provide a promising candidate for the new generation of key building blocks of the upscale protective garments.

White-Light Emission of Dye-Doped Polymer Submicronic Fibers Produced by Electrospinning

Lighting and display technologies are evolving at tremendous rates nowadays; new device architectures based on new, microscopic building blocks are being developed. Besides high light-emission efficiencies, qualities including low cost, low environmental impact, flexibility, or lightweightness are sought for developing new types of devices. Electrospun polymer fibers represent an interesting type of such microscopic structures that can be employed in developing new functionalities. White-light-emitting fiber mats were prepared by the electrospinning of different dye-doped polymer solutions. Two approaches were used in order to obtain white-light emissions: the overlapping of single-dye-doped electrospun fiber mats, and the electrospinning of mixtures of different ratios of single-dye-doped polymer solutions. Scanning electron microscopy (SEM) was used to investigate the morphologies of the electrospun fibers with diameters ranging between 300 nm and 1 µm. Optical absorption and photoluminescence (PL) were evaluated for single-dye-doped submicronic fiber mats, for overlapping mats, and for fiber mats obtained from different compositions of mixtures. Depending on the ratios of the mixtures of different dyes, the luminance was balanced between blue and red emissions. Commission Internationale de L'Eclairage (CIE) measurements depict this fine-tuning of the colors' intensities, and the right composition for white-light emission of the submicronic fiber mats was found.

Fast-Response and Reusable Oxytetracycline Colorimetric Strips Based on Nickel (II) Ions Immobilized Carboxymethylcellulose/Polyacrylonitrile Nanofibrous Membranes

Driven by economic interests, the abuse of antibiotics has become a significant concern for humans worldwide. As one of the most commonly used antibiotics, oxytetracycline (OTC) residue in animal-derived foods occurs occasionally, which has caused danger to humanity. However, there is still no simple and efficient solution to detect OTC residue. Here, an easily-operated colorimetric strategy for OTC detection was developed based on nickel ions (Ni2+) immobilized carboxymethylcellulose/polyacrylonitrile nanofibrous membranes (Ni@CMC/PAN NFMs). Owing to numerous O- and N-containing groups OTC has a strong tendency to complex with Ni2+ on the strips, inducing a color change from light green to yellow visible to the naked eye. The NFMs structural features, CMC functionalization process, and Ni2+ immobilization amount was carefully regulated to assure OTC detection whilst maintaining the inherent characteristics of NFMs. With the benefits of the large specific surface area (SSA) and small pore size of NFMs, the strips not only exhibited a rapid response (2 min), and low detection limit (5 nM) but also performed with good reversibility and selectivity concerning OTC detection over other antibiotics. The successful development of such enchanting nanofibrous materials may provide a new comprehension into the design and improvement of colorimetric strips.

Application of octanohydroxamic acid for liquid-liquid extraction of manganese oxides and fabrication of supercapacitor electrodes

MnO₂ and Mn₃O₄ particles were prepared by wet chemical methods and efficiently dispersed and mixed with multiwalled carbon nanotubes (MWCNT) for the fabrication of composite MnO₂-MWCNT and Mn₃O₄-MWCNT electrodes for electrochemical supercapacitors (ES). The problem of particle agglomeration was addressed by particle extraction through a liquid-liquid interface (PELLI) using octanohydroxamic acid (OHA) as a new extractor. OHA exhibited remarkable adsorption on particles due to a bidentate bonding mechanism. The use of OHA broadened the application of PELLI technology, because it allowed good extraction of particles from an aqueous phase at high pH. Moreover, OHA allowed efficient extraction by strong adsorption on particles not only at the liquid-liquid interface, but also in the bulk of an aqueous phase. Building on the advantages offered by the PELLI method and OHA as an extractor we found that Mn₃O₄-MWCNT electrodes exhibited a remarkably high capacitance of 4.2F cm^-2. Another major finding was that capacitance of Mn₃O₄-MWCNT electrodes was higher than that of MnO₂-MWCNT electrodes at active mass of 33 mg cm^-2. This finding showed processing advantages of PELLI and paved the way for applications of novel colloidal and surface modification strategies for the development of advanced ES. A conceptually new approach has been proposed based on the use of hydroxamic acids as capping agents for synthesis and extractor molecules for PELLI.

Sandwich-structured composite fibrous membranes with tunable porous structure for waterproof, breathable, and oil-water separation applications

HYPOTHESIS

In general, microporous membranes with waterproofness, breathability, and oil-water separation performance are prepared from hydrophobic raw materials and demonstrated to exhibit an interconnected porous structure. Hence, constructing porous and gradient-structured composite membranes by integrating robust hydrophobic/lipophilic polyvinylidene fluoride (PVDF) and breathable polyurethane (PU) microporous membranes could help realize a selective separation process.

EXPERIMENT

Here, novel polyvinylidene fluoride-carbon nanotube/polyurethane/polyvinylidene fluoride-carbon nanotube (PVDF-CNT/PU/PVDF-CNT) sandwich-structured microporous membranes were fabricated by sequential electrospinning. The influence of the thickness ratios of PVDF/PU/PVDF and carbon nanotube (CNT) content on the fibrous construction, porous structure, and wettability of the composite membranes was systematically studied by scanning electron microscopy (SEM), pore size, porosity and contact angle. Significantly, the effect of the fibrous construction, porous structure, and wettability on the waterproofness, breathability, and oil-water separation ability of the composite membranes was investigated.

FINDINGS

The novel separation system proved the 'complementary effect' between the PVDF and PU membranes. Further, because of the elaborate gradient construction, superior porous structure, and robust hydrophobicity-oleophilicity, the resultant membranes exhibited moderate waterproofness (38 kPa) and excellent breathability (8.63 kg m^-2 d^-1), and oil-water separation, confirming that they could be promising alternatives for numerous practical applications, such as protective clothing, treatment of oil-contaminated water, and membrane distillation.