Ultrathin Beta-Nickel hydroxide nanosheets grown along multi-walled carbon nanotubes: A novel nanohybrid for enhancing flame retardancy and smoke toxicity suppression of unsaturated polyester resin

Fire-safe unsaturated polyester resin nanocomposites based on MAX and MXene: a comparative investigation of their properties and mechanism of fire retardancy

Recently, MXene, as a novel graphene-like nanomaterial, has been found to bestow good flame-retardant and smoke-suppression properties to polymers mainly due to the physical barrier effect of its 2D nanosheets. However, a comprehensive investigation of its chemical components as an important factor for these properties has not been conducted to date. To address this issue, herein, MXene (Ti₃C₂T_x) and MAX (Ti₃AlC₂) were introduced into unsaturated polyester resin (UPR) at same amounts (2.0 wt%). Their structures are different (multilayer for MXene and bulk for MAX), but the chemical components are similar; therefore, it is important to study the influence of the chemical components of MXene on the fire-safety properties of polymers. In this study, 2 wt% MAX was added to the UPR, and the peak heat release rate (PHRR), the total smoke production (TSP), and carbon monoxide production (COP) of the resulting material were reduced by 11.04%, 19.08%, and 15.79%, respectively; these findings demonstrate the important role of the chemical components of MAX: Ti exerts a catalytic attenuation effect on the UPR nanocomposites during combustion. Moreover, a better fire-safety property of the MXene/UPR nanocomposites (reduction of PHRR by 29.56%, TSP by 25.26%, and COP by 31.58%) than that of the MAX/UPR nanocomposites was achieved, which was due to the physical barrier effect of the MXene nanosheets. This study verifies that in addition to the physical barrier effect, the chemical components play a very important role in the fire safety enhancement of MXene-based nanocomposites.

Synergistic Effect of Hexaphenoxycyclotriphosphazene and Aluminium Tri-Hydroxide on Flame Retardancy and Smoke Suppression of Epoxy Resin

Flame retardancy and smoke suppression of polymer materials are key problems to be considered for applications that have a potential fire hazard. This study selected hexaphenoxycyclotriphosphazene (HPCTP) and aluminium tri-hydroxide (ATH) powder as an integrated flame retardant treatment in epoxy resin (EP) which is usually used as the matrix of a composite. The characteristics of flame retardancy and smoke suppression were investigated. The results showed that when treated with HPCTP and ATH, the resin exhibits superior properties, resisting flame development and smoke release. Based on analysis of the surface structure of the burned materials by scanning electron microscopy–energy dispersive spectroscopy and X-ray photoelectron spectroscopy, it was confirmed that HPCTP and ATH can attract a lot of heat to slow down decomposition of the resin and produce a comprehensive protection system consisting of a non-flammable gas and solid phases during burning. Non-flammable gas can reduce the concentration of flammable gas to inhibit combustion. In addition, H2O vapour can also reduce the concentration of flammable gas to inhibit combustion. Meanwhile, solid phase films can insulate air to slow down combustion and smoke release.