One-step preparation of superhydrophobic acrylonitrile-butadiene-styrene copolymer coating for ultrafast separation of water-in-oil emulsions

Slippery Mechanism for Enhancing Separation and Anti-fouling of the Superhydrophobic Membrane in a Water-in-Oil Emulsion: Evaluating Water Adhesion of the Membrane Surface

Water removal from water-in-oil emulsions with superhydrophobic microporous membranes is an important industrial process, where the interface property between the membrane and feed becomes critical. Here, superhydrophobic isotactic polypropylene (iPP) microporous membranes with the "lotus effect" and "rose-petal effect" were prepared via utilizing micromolding phase separation, where the former surface exhibited a water contact angle of 153° and a sliding angle of 3.2°, while the latter surface exhibited a water contact angle of 151° and adhesive characteristics. Surface topography and wettability analysis revealed that surface hydrophobicity and water adhesion could be improved by reducing the periodic distance and diameter and increasing the height of the micron-scale structure. When treating both water-in-oil emulsions and water-in-oil emulsions containing BSA pollutants, the iPP membrane with the "lotus effect" was superior to that with the "rose-petal effect" in terms of oil permeate flux, separation efficiency, anti-fouling ability, and recyclability (20 cycles). To explain this phenomenon, a "slippery" mechanism was introduced that correlated the sliding angle to the slippery surface of the iPP membrane with the "lotus effect" and its anti-water adhesion property. This work proposed a theoretical platform for investigating the effect of water adhesion on superhydrophobic membranes in terms of oil-water separation efficiency and anti-fouling ability, thereby providing a definite basis for preparing superhydrophobic membranes with efficient separation and fouling resistance capabilities.

Eco-Friendly Superhydrophobic Composites with Thermostability, UV Resistance, and Coating Transparency

Despite the market demand for biofiber assemblies endowed with superhydrophobicity being huge, the current approaches to their production are complicated, time-consuming, and even pose a serious threat to the environment. Here, we report a simple surface treatment strategy to prepare environmentally friendly superhydrophobic biofiber composites. The obtained samples have certain UV resistance properties, which are mainly determined by the titanium dioxide (TiO₂) dosage. Additionally, the sample has excellent thermal stability, and the contact angle is maintained at 153.26° after heat treatment at 140 °C for 1 h. Quite encouragingly, thermal annealing of samples can transform translucent coatings into transparent structures and increase the tensile strength. The results also showed that this strategy could be integrated into the mass production process of other biofiber components as coating, such as coated paper, pulp boards, cotton gauzes, tissues, and so forth. Due to the facile preparation and environment-friendliness, this sustainable paper-based product can be used in diversified applications: packaging and storage of liquid food, protection of ancient books, UV- and rain-proof materials, and teaching demonstrations relevant to bionics, among others.

Do Microplastics Enter Our Food Chain Via Root Vegetables? A Raman Based Spectroscopic Study on Raphanus sativus

The outburst of plastic pollution in terrestrial ecosystems poses a potential threat to agriculture and food safety. Studies have already provided evidence for the uptake of plastic microparticles by several plant species, accompanied by numerous developmental effects, using fluorescence labelling techniques. Here, we introduce the implementation of confocal Raman spectroscopy, a label-free method, for the effective detection of microplastics (MPs) accumulation in the roots of a common edible root vegetable plant, Raphanus sativus, after treatment with acrylonitrile butadiene styrene (ABS) powder. We also demonstrate the concomitant occurrence of phenotypic defects in the polymer-treated plants. We anticipate that this work can provide new insights not only into the extent of the impact this widespread phenomenon has on crop plants but also on the methodological requirements to address it.

Surface Finishing of 3D-Printed Polymers with Selected Coatings

Surface treatment of 3D-printed objects with coatings, besides protection against environmental influences, offers the improvement of visual appearance of the printed elements. In order to design an optimum surface system, the physical and chemical properties of polymers surfaces should be well-known. In the present study, 3D-printed samples of acrylonitrile-butadiene-styrene, poly(lactic acid) and poly(lactic acid) with wood flour additive were coated with three different types of coating, namely solvent borne alkyd coating, water borne acrylic coating and coating made of acrylonitrile-butadiene-styrene diluted in acetone. The surface properties of substrates and the properties of surface systems were assessed with different methods. The results revealed the surfaces of polymers having hydrophobic character, whereas the color, gloss, surface roughness and coating film thickness of coated surfaces depend on the characteristics of particular coatings. Finally, the adhesion of coatings was shown to be appropriate, but dependent on substrate surface porosity and chemical properties of both substrate surface and coating asset.

Waterproof breathable layers - A review

Waterproof breathable layers (WPBLs) can be classified into two large groups of hydrophilic nonporous and hydrophobic porous layers. These layers (e.g., fabrics, films, membranes, and meshes) can be produced by various continuous and non-continuous processes such as coating, laminating, film stretching, casting, etc. The most common methods for production, characterization, and testing of WPBLs are presented and discussed in light of recent publications. The materials with high level of waterproofness and breathability are often used in outerwear for winter sports, sailing apparel, raincoats, military/police jackets, backpacks, tents, cargo raps, footwear and etc. WPBLs can also be used for other specialized applications such as membrane distillation, oil-water filtration, and wound dressing. These applications are discussed by presenting several good examples. The main challenge in the production of these layers is to compromise between waterproofness and breathability with opposing nature. The related research gaps, challenges, and future outlook are highlighted to shed more light on the topic.

Fabrication of a PPS Microporous Membrane for Efficient Water-in-Oil Emulsion Separation

Separation of emulsified water/oil mixtures is a worldwide concern. However, poor chemical and solvent resistance of general polymeric membranes limit these membranes for application in the separation process. In this study, a poly(phenylene sulfide) (PPS) porous membrane with a rough concave topographic feature was fabricated, which exhibited excellent superoleophilicity and under-oil superhydrophobicity. The membrane is capable of separating both surfactant-free and surfactant-stabilized emulsions with a high flux. All of the water contents of the treated oils were below 300 ppm. The excellent water resistance property and cycling performance support the PPS membrane displaying an excellent reusability. Additionally, this PPS membrane was also certified to be used in strong solvents for a long time. In conclusion, the successful application of the thermally induced phase separation (TIPS) method may provide a new approach to fabricate the PPS membrane and improve its properties, and the application of the PPS membrane to separate water-in-oil emulsions is promising in practical applications.

Enhanced oil removal from water in oil stable emulsions using electrospun nanocomposite fiber mats

Fibrous mats with hydrophobic and oleophilic properties have been fabricated and used as absorbents of oil from stable water in oil emulsions.