Monodisperse manganese oxide nanoparticles: Synthesis, characterization, and chemical reactivity

Oxidative stress modulating nanomaterials and their biochemical roles in nanomedicine

Many pathological conditions are predominantly associated with oxidative stress, arising from reactive oxygen species (ROS); therefore, the modulation of redox activities has been a key strategy to restore normal tissue functions. Current approaches involve establishing a favorable cellular redox environment through the administration of therapeutic drugs and redox-active nanomaterials (RANs). In particular, RANs not only provide a stable and reliable means of therapeutic delivery but also possess the capacity to finely tune various interconnected components, including radicals, enzymes, proteins, transcription factors, and metabolites. Here, we discuss the roles that engineered RANs play in a spectrum of pathological conditions, such as cancer, neurodegenerative diseases, infections, and inflammation. We visualize the dual functions of RANs as both generator and scavenger of ROS, emphasizing their profound impact on diverse cellular functions. The focus of this review is solely on inorganic redox-active nanomaterials (inorganic RANs). Additionally, we deliberate on the challenges associated with current RANs-based approaches and propose potential research directions for their future clinical translation.

Graphene oxide-manganese oxide composite as an electrocatalyst for simultaneous detection of manganese- and chromium-contaminated water

The development of a sensitive and selective electrochemical sensor for simultaneous quantification of manganese (Mn(II)) and chromium (Cr(VI)) using composite of graphene oxide (GO) and manganese oxide modified screen printed carbon electrode (GO-Mn2O3/SPCE) is reported for the first time. The good sensing performance is achieved by mixing GO prepared by modified Hummer's method (GO-H) with proper particle size of Mn2O3 (241 nm). The mechanism of this sensor is based on the formation of Mn-O and Cr-O on the modified electrode with assistance of oxygen moieties provided by both Mn2O3 NPs and GO. The analytical performances were investigated by measuring electrochemical signal of Mn(II) and Cr(VI) by using square-wave cathodic stripping voltammetry (SWCSV). This sensor holds low electrode-to-electrode variation (relative standard deviation (RSD) < 4%) with a good limit of detection (LOD) at about 6.67 and 11.20 μg⋅L-1 for Mn(II) and Cr(VI), respectively. Applicability of this sensor was demonstrated by measuring Mn(II) and Cr(VI) in tap water samples with recovery of 90.77-103.45% and 82.34-103.73% for Mn(II) and Cr(VI) determinations, respectively. With the contribution of both GO and Mn2O3 as electrocatalysts, this developed sensor is capable to be used for water quality monitoring in real samples.

Amorphous K-Buserite Microspheres for High-Performance Aqueous Zn-Ion Batteries and Hybrid Supercapacitors

Aqueous Zn-ion batteries (AZIBs) and Zn-ion hybrid supercapacitors (AZHSCs) are considered promising energy-storage alternatives to Li-ion batteries due to the attractive merits of low-price and high-safety. However, the lack of suitable cathode materials always hinders their large-scale application. Herein, amorphous K-buserite microspheres (denoted as K-MnO_x ) are reported as cathode materials for both AZIBs and AZHSCs, and the energy-storage mechanism is systematically revealed. It is found that K-MnO_x is composed of rich amorphous K-buserite units, which can irreversibly be transformed into amorphous Zn-buserite units in the first discharge cycle. Innovatively, the transformed Zn-buserite acts as active materials in the following cycles and is highly active/stable for fast Zn-diffusion and superhigh pseudocapacitance, enabling the achievement of high-efficiency energy storage. In the AZIBs, K-MnO_x delivers 306 mAh g^-1 after 100 cycles at 0.1 A g^-1 with 102% capacity retention, while in the AZHSCs, it shows 515.0/116.0 F g^-1 at 0.15/20.0 A g^-1 with 92.9% capacitance retention at 5.0 A g^-1 after 20 000 cycles. Besides, the power/energy density of AZHSCs device can reach up to 16.94 kW kg^-1 (at 20 A g^-1 )/206.7 Wh kg^-1 (at 0.15 A g^-1 ). This work may provide some references for designing next-generation aqueous energy-storage devices with high energy/power density.

Facile synthesis of single-crystalline MnO2 nanowire arrays with high photothermal catalytic activity

A simple process has been developed to form single-crystalline β-MnO₂ nanowire arrays (NWAs) with a large surface area of 125 m² g^-1 on a glass plate working as a highly active three dimensional (3D) photothermal catalyst under the illumination of near infrared light due to the efficient light harvesting and heat confinement near the reaction field in addition to the large surface area.

Sustainable approaches for removing Rhodamine B dye using agricultural waste adsorbents: A review

Rhodamine B (RhB) is among the toxic dyes due to the carcinogenic, neurotoxic effects and ability to cause several diseases for humans. The adsorption with agricultural waste adsorbent recorded high performance for the RhB removal. The current review aimed to explore the efficiency of different adsorbents which have been used in the few last years for removing RhB dye from wastewater. The data of adsorption of RhB using agricultural wastes were collected from the Scopus database in the period between 2015 and 2021. The use of agricultural wastes and adsorbents as a replacement for the activated has received high attention among researchers. The RhB removal methods by microbial enzymes and biomass occurred between 76 and 90.1%. In comparison, the adsorption with agricultural wastes such as activated carbon white sugar reached 98% within 12 min. The adsorption process has a wide range of pH (3-10) due to the zwitterionic forms of RhB. Gmelina aborea leaf activated carbon is among the agriculture wastes absorbents that exhibited 1000 mg g^-1 of the adsorption capacity. It appeared that the agricultural wastes adsorbents have a high potential for removing RhB from the wastewater.

Manganese-based advanced nanoparticles for biomedical applications: future opportunity and challenges

Nanotechnology is the most promising technology to evolve in the last decade. Recent research has shown that transition metal nanoparticles especially manganese (Mn)-based nanoparticles have great potential for various biomedical applications due to their unique fundamental properties. Therefore, globally, scientists are concentrating on the development of various new manganese-based nanoparticles (size and shape dependent) due to their indispensable utilities. Although numerous reports are available regarding the use of manganese nanoparticles, there is no comprehensive review highlighting the recent development of manganese-based nanomaterials and their potential applications in the area of biomedical sciences. The present review article provides an overall survey on the recent advancement of manganese nanomaterials in biomedical nanotechnology and other fields. Further, the future perspectives and challenges are also discussed to explore the wider application of manganese nanoparticles in the near future. Overall, this review presents a fundamental understanding and the role of manganese in various fields, which will attract a wider spectrum of the scientific community.

Green Synthesis of Ag-MnO2 Nanoparticles using Chelidonium majus and Vinca minor Extracts and Their In Vitro Cytotoxicity

Medicinal plants are often used as reducing agents to prepare metal nanoparticles through green-synthesis due to natural compounds and their potential as chemotherapeutic drugs. Thus, three types of eco-friendly Ag-MnO₂ nanoparticles (Ag-MnO₂NPs) were synthesized using C. majus (CmNPs), V. minor (VmNPs), and a 1:1 mixture of the two extracts (MNPs). These NPs were characterized using S/TEM, EDX, XRD, and FTIR methods, and their biological activity was assessed in vitro on normal keratinocytes (HaCaT) and skin melanoma cells (A375). All synthesized NPs had manganese oxide in the middle, and silver oxide and plant extract on the exterior. The NPs had different forms (polygonal, oval, and spherical), uniformly distributed, with crystalline structures and different sizes (9.3 nm for MNPs; 10 nm for VmNPs, and 32.4 nm for CmNPs). The best results were obtained with VmNPs, which reduced the viability of A375 cells up 38.8% and had a moderate cytotoxic effect on HaCaT (46.4%) at concentrations above 500 µg/mL. At the same concentrations, CmNPs had a rather proliferative effect, whereas MNPs negatively affected both cell lines. For the first time, this paper proved the synergistic action of the combined C. majus and V. minor extracts to form small and uniformly distributed Ag-MnO₂NPs with high potential for selective treatments.

OMS-2-based catalysts with controllable hierarchical morphologies for highly efficient catalytic oxidation of formaldehyde

Cryptomelane-type octahedral molecular sieve (OMS-2) catalysts are currently attracting tremendous attention due to their low-cost and remarkable thermo-catalytic activity. However, it is still difficult for OMS-2 catalysts to completely degrade formaldehyde at relatively low or even ambient temperature. In this work, OMS-2 catalysts with different ratios of length to diameter were prepared and the OMS-2-s with the minim ratio of length to diameter (1-3) exhibited the best catalytic performance than the other samples. Then, the optimized OMS-2-s nanorods were loaded on the SiO₂ nanofibers via a simultaneous electrospining-spray strategy. The evaluation for the dynamic catalytic activities of the samples showed that, the T₅₀ (HCHO conversion reached to 50%) for the OMS-2/SiO₂ nanofibrous membranes was decreased by 24 °C than the OMS-2-s nanorods. Furthermore, in the static experiment of HCHO decomposition, the composite membrane could achieve a catalytic efficiency of 52.3% at 25 °C, much higher than that of the OMS-2-s nanorods (45.9%). This work offers a new strategy to improve the catalytic efficiency of OMS-2 by controlling the morphology and loading of OMS-2 nanorods, and also designs a kind of advanced nano OMS-2-based nanofibrous membranes with hierarchical nanostructures for the highly efficient formaldehyde elimination during the practical application.