Assessing the efficiency of imidazolium-based ionic liquids on the phase behavior of a synthetic biomedical thermoresponsive polymer

Deep eutectic solvents induced changes in the phase transition behavior of smart polymers: a sustainable future approach

Deep eutectic solvents (DESs) are considered "green" and "sustainable" alternatives to conventional organic solvents and ionic liquids (ILs) due to their characteristic properties and relatively low costs. DESs are considered IL analogs and have attracted consideration as benign media formulations for the synthesis of novel polymers because they satisfy the principle of sustainability. Over the past few years, the use of DESs has resulted in novel pathways for the synthesis of novel materials, biomaterials, functional materials, and ionic soft materials. Furthermore, DESs have been widely applied in the science, industrial, engineering, and technological fields. On the other hand, stimulus-responsive (smart) polymers have been widely utilized in intelligent devices owing to their virtues of good processibility, stimuli and environmental sensitivity, responsivity, and so on. With the introduction of a DES into the smart polymeric matrices, their potential characteristics, biocompatibility, and flexibility endow the corresponding DES-based polymeric materials with intriguing properties, which in turn will broaden their applications in various domains of polymer science and material chemistry. Substantial research has been done in the fabrication of DES-based polymeric materials. Numerous studies have extensively investigated the effects of DESs on biomolecules such as proteins/enzymes and nucleic acids, whereas few have addressed the impact of DESs on the aggregation and phase transition behaviors of smart polymers. This review focuses on mechanistic insights, aggregation behavior, and interactions between smart polymers and DESs. Opportunities and future research perspectives in this blossoming arena are also discussed. It is hoped that this review will pave futuristic pathways for the design and development of advanced DES-based polymeric materials and biomaterials for various applications.

Ionic Liquids Mediated Micellization of Pluronic Copolymers: Aggregation Behavior of Amphiphilic Triblock Copolymers

Understanding the micellization of amphiphilic triblock copolymers, especially Pluronics can play a persuasive role in engineering "smart" formulations for drug delivery applications. Their underlying self-assembly in the presence of designer solvents such as ionic liquids (ILs) provides combinatorial benefits of unique munificent properties of ILs and copolymers. The complex molecular interactions in the Pluronic copolymers/ILs mixed system influence the aggregation mechanism of copolymers depending on various aspects with no standardized factors to govern the structure-property relationship, which led to the practical applications. Here, we summarized recent progress in understanding the micellization process of IL-Pluronic mixed systems. Special emphasis was given to pure Pluronic systems (i.e., PEO-PPO-PEO) without any structural modifications, such as copolymerization with other functional groups, and ILs having cholinium and imidazolium groups. We expect that the correlation between existing/developing experimental and theoretical studies will provide the necessary basis and impetus for successful utilization in drug delivery applications.

Albumin-loaded thermo/pH dual-responsive nanogels based on sodium alginate and poly (N-vinyl caprolactam)

During the past decades, many researchers have tried to encapsulate medicines in biopolymer nanogels as injectable medicines. In the present study, dual-responsive bovine serum albumin (BSA)-loaded nanogels prepared from sodium alginate grafted poly (N-vinyl caprolactam) (PNVCL) have been reported. First, PNVCL-g-sodium alginate (PNVCL-g-Alg) was synthesized through free radical polymerization, and then nanogels were obtained from ionic crosslinking of sodium alginate in the presence of BSA. FTIR spectra showed that PNVCL-g-Alg nanogels were successfully prepared. Turbidimetry and rheometry analyses demonstrated the cloud point temperature near the human body. Particle size was evaluated using FE-SEM and dynamic light scattering and it was found that the size of particles in dry and swollen state are about 30 and 280 nm, respectively. The effect of temperature and pH on BSA release was evaluated. By comparing the drug release behavior, we found that the release of the protein at the temperature above the cloud point is faster than that at the temperature below the cloud point. The pH sensitivity of BSA-loaded PNVCL-g-Alg was evaluated at pH 5.5 and 7.4 and showed that the drug release was faster at acidic pH than at neutral pH.

Effect of Imidazolium Nitrate Ionic Liquids on Conformational Changes of Poly(N-vinylcaprolactam)

Detailed information about molecular interactions and conformational changes of polymeric components in the presence of ionic liquids (ILs) is essential for designing novel polymeric ionic liquid-based biomaterials. In biomaterials science and technology, thermoresponsive polymers (TRPs) are widely viewed as potential candidates for the fabrication of biorelated medical devices. Here, we synthesized thermoresponsive poly(N-vinyl-caprolactam) (PVCL) polymer and investigated the effects of imidazolium-based ILs (1-ethyl-3-methyl imidazolium nitrate and 1-butyl-3-methylimidazolium nitrate) with common anion and different cations on the phase transition behavior of PVCL aqueous solution. The impact of ILs on the phase transition behavior of PVCL was monitored by using UV-visible absorption spectra, steady-state fluorescence spectroscopy, thermal fluorescence spectroscopy, and temperature dependent dynamic light scattering. Results showed significant changes in the absorbance, molecular interactions, agglomeration, and coil to globule transition behaviors of PVCL in the presence of two ILs. PVCL aqueous solution showed significant conformational changes after the addition of ILs.

Ultralow-cost portable device for cesium detection via perovskite fluorescence

Public anxiety and concern from cesium pollution in oceans have been back on the agenda since tons of nuclear waste water were announced to be poured into oceans. Cesium ion can easily enter organisms and bioaccumulate in animals and plants, thus its harm is chronic to humans through food chains. Here we showed a kind of hybrid ionic liquid membrane (HILM) for detection of cesium ion in seawater through CsPbBr₃ perovskite fluorescence. With sustainability in mind, HILM was built frugally. The lowest cost of HILM is below 3 cents per piece. The HILM can detect cesium ion quickly with eye-readable fluorescence signal. Ultracheap, portable, easy-to-use on-site detection device could offer benefit for personal security and applications in environment science and ecology in the future decades.

Gold nanospheres/nanorods as highly promising candidates for the hydrophilic/hydrophobic balance of poly(N-vinylcaprolactam): A thoughtful design of nanocomposites

A thermally induced solubility alterations of widely accepted thermoresponsive polymer poly (N-vinylcaprolactam) (PVCL) tethered to gold nanoparticles (AuNPs) surface is characterized by different biophysical techniques such as steady state fluorescence,...

Biological Stimuli-Induced Phase Transition of a Synthesized Block Copolymer: Preferential Interactions between PNIPAM-b-PNVCL and Heme Proteins

The beguiling world of functional polymers is dominated by thermoresponsive polymers with unique structural and molecular attributes. Limited work has been reported on the protein-induced conformational transition of block copolymers; furthermore, the literature lacks a clear understanding of the influence of proteins on the phase behavior of thermoresponsive copolymers. Herein, we have synthesized poly(N-isopropylacrylamide)-b-poly(N-vinylcaprolactam) (PNIPAM-b-PNVCL) by RAFT polymerization using N-isopropylacrylamide and N-vinylcaprolactam. Furthermore, using various biophysical techniques, we have explored the effect of cytochrome c (Cyt c), myoglobin (Mb), and hemoglobin (Hb) with varying concentrations on the aggregation behavior of PNIPAM-b-PNVCL. Absorption and steady-state fluorescence spectroscopy measurements were performed at room temperature to examine the copolymerization effect on fluorescent probe binding and biomolecular interactions between PNIPAM-b-PNVCL and proteins. Furthermore, temperature-dependent fluorescence spectroscopy and dynamic light scattering studies were performed to get deeper insights into the lower critical solution temperature (LCST) of PNIPAM-b-PNVCL. Small-angle neutron scattering (SANS) was also employed to understand the copolymer behavior in the presence of heme proteins. With the incorporation of proteins to PNIPAM-b-PNVCL aqueous solution, LCST has been varied to different extents owing to the preferential, molecular, and noncovalent interactions between PNIPAM-b-PNVCL and proteins. The present study can pave new insights between heme proteins and block copolymer interactions, which will help design biomimetic surfaces and aid in the strategic fabrication of copolymer-protein bioconjugates.

The role of osmolytes in the temperature-triggered conformational transition of poly(N-vinylcaprolactam): an experimental and computational study

Biomedical industries are widely exploring the use of thermo-responsive polymers (TRPs) in the advanced development of drug delivery and in many other pharmaceutical applications. There is a great need to investigate the use of less toxic and more (bio-)compatible TRPs employing several additives, which could modify the conformational transition behavior of TRPs in aqueous solution. To move forward in this aspect, we have chosen the less toxic bio-based polymer poly(N-vinylcaprolactam) (PVCL) and three different methylamine-based osmolytes, trimethylamine N-oxide (TMAO), betaine and sarcosine, in order to investigate their particular interactions with the polymer segments in PVCL and therefore the corresponding changes in the thermo-responsive conformational behavior. Several biophysical techniques, UV-visible spectroscopy, fluorescence spectroscopy, dynamic light scattering (DLS) and laser Raman spectroscopy, as well as classical computer simulation methods such as molecular dynamics are employed in the current work. All the studied methylamines are found to favor the hydrophobic collapse of the polymer thus stabilizing the globular state of PVCL. Sarcosine is observed to cause the maximum decrease in lower critical solution temperature (LCST) of PVCL followed by TMAO and then betaine. The differences observed in the LCST values of PVCL in the presence of these molecules can be attributed to the different polymer-osmolyte interactions. The less sterically hindered N atom in the case of sarcosine causes a significant difference in the phase transition temperature values of PVCL compared to betaine and TMAO, where the nitrogen atom is buried by three methyl groups attached to it.

Efficacy of several additives to modulate the phase behavior of biomedical polymers: A comprehensive and comparative outlook

Several new classes of polymeric materials are being introduced with unique properties. Thermoresponsive polymers (TRPs) are one of the most fascinating and emerging class of biomaterials in biomedical research. The design of TRPs with good response to temperature and its ability to exhibit coil to globular transition behavior near to physiological temperature made them more promising materials in the field of biomaterials and biomedicines. Instead of numerous studies on TRPs, the mechanistic interplay among several additives and TRPs is still not understood clearly and completely. The lack of complete understanding of biomolecular interactions of various additives with TRPs is limiting their applications in interdisciplinary science as well as pharmaceutical industry. There is a great need to provide a collective and comprehensive information of various additives and their behavior on widely accepted biopolymers, TRPs such as poly(N-isopropylacrylamide) (PNIPAM), poly(vinyl methyl ether) (PVME), poly(N-vinylcaprolactum) (PVCL) and poly(ethylene glycol)-poly(propylene glycol)-poly(ethylene glycol) (PEG-PPG-PEG) in aqueous solution. Obviously, as the literature on the influence of various additives on TRPs is very vast, therefore we focus our review only on these four selected TRPs. Additives such as polyols, methylamines, surfactants and denaturants basically made the significant changes in water structure associated to polymer via their entropy variation which is the direct influence of their directly or indirectly binding abilities. Eventually, this review addresses a brief overview of the most recent literature of applications based phase behavior of four selected TRPs in response to external stimuli. The work enhances the knowledge for use of TRPs in the advanced development of drug delivery system and in many more pharmaceutical applications. These kinds of studies provide powerful impact in exploring the utility range of polymeric materials in various field of science.

The Influence of Initiator Concentration on Selected Properties on Poly-N-Vinylcaprolactam Nanoparticles

The thermosensitive polymers of N-vinylcaprolactam P1, P2, P3, P4, and P5 were synthesized via the surfactant free precipitation polymerization (SFPP) at 70 °C in the presence of cationic initiator 2,2’-azobis[2-methylpropionamidine] dihydrochloride (AMPA). The influence of various concentrations of initiator AMPA on particle size, aggregation and lower critical temperature solution (LCST) was investigated by dynamic light scattering (DLS) measurement. The conductivity was measured in the course of the synthesis and during temperature decrease of the reaction mixtures. The polymers were characterized by Attenuated Total Reflectance-Fourier Transform Infrared spectroscopy (ATR-FTIR), ¹H NMR, and thermogravimetric analysis. Thermal parameters of the degradations process were investigated using thermogravimetric analysis (TGA/DTA) under non-isothermal conditions in N₂ atmosphere. The samples were characterized by powder X-ray diffraction analysis (PXRD).The hydrodynamic diameter (HD), polydispersity index (PDI) and zeta potential (ZP) were measured in aqueous dispersions of the synthesized polymers in temperature 18–45 °C. HD and PDI values at 18 °C were 137.23 ± 67.65 nm (PDI = 0.53 ± 0.18), 83.40 ± 74.46 nm (PDI = 0.35 ± 0.08), 22.11 ± 0.29 nm (PDI = 0.45 ± 0.05), 29.27 ± 0.50 nm (PDI = 0.41 ± 0.04), 39.18 ± 0.57 nm (PDI = 0.38 ± 0.01) for P1, P2, P3, P4, and P5, respectively. The aqueous solutions of the obtained polymers at 18–45 °C had a positive charge. ZP’s for P1, P2, P3, P4, and P5 polymers at 18 °C were 11.64 ± 4.27 mV, 12.71 ± 3.56 mV, 3.24 ± 0.10 mV, 0.77 ± 0.28 mV, 1.78 ± 0.56 mV respectively. The LCST range was between 32 and 38 °C. We conclude that the concentration of initiator affects the size of obtained polymeric spheres and theirs LCST.

Intelligent antibacterial surface based on ionic liquid molecular brushes for bacterial killing and release

The prevention of bacteria-induced infections has been increasing in importance in both clinical surgery and biomedical engineering. Although great attention has been paid to designing intelligent antibacterial surfaces, the fabrication processes are still not facile and universal enough, and the antibacterial efficiencies of these surfaces are also not ideal. Herein, ionic liquid (IL) molecules of 3-(12-mercaptododecyl)-1-methyl-1H-imidazol-3-ium bromide (IL(Br)) were synthesized with the minimum inhibitory concentrations as low as 4 and 8 μg mL-1 against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), respectively. By simply immersing a polymeric substrate into the IL(Br) solution, an antibacterial surface with high killing efficiency of 99% against S. aureus (94% against E. coli) was achieved via a mussel-inspired approach. Subsequently, 97% S. aureus and 95% E. coli on the substrate could be released by simple ion-exchange of Br- with (CF3SO2)2N- due to the ion sensitivity of the IL molecular brushes. Thus, the proposed facile strategy towards a superior efficiency surface could be potentially used in intelligent antibacterial fields.

Comprehensive Insight into the Protein-Surface Biomolecular Interactions on a Smart Material: Complex Formation between Poly(N-vinyl Caprolactam) and Heme Protein

Proteins are naturally occurring biopolymers that exhibit a wide range of functional applications. Meticulous knowledge about biomolecular interactions between polymeric biomaterials and body fluids or proteins is essential for designing biospecific surfaces and understanding protein-polymer interactions beyond existing limitations. In this regard, we studied the comparative effect of heme proteins such as cytochrome c, myoglobin, and hemoglobin on the phase behavior of poly(N-vinyl caprolactam) (PVCL) aqueous solution and demonstrated various biomolecular interactions in the polymer-protein complex with the aid of various biophysical techniques. Absorption spectroscopy, steady-state fluorescence spectroscopy, Fourier transform infrared spectroscopy, dynamic light scattering studies, laser Raman spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy were carried out at room temperature to examine the changes in absorbance, fluorescence intensity, molecular interactions, particle size, agglomeration behavior, and surface morphologies. Furthermore, differential scanning calorimetry studies were also performed to analyze conformational changes, coil to globule transition, and phase behavior in the presence of proteins. With the addition of heme proteins, the lower critical solution temperature of PVCL increases toward higher temperature. The present study may help in designing smart biomaterials and stimulate more novel concepts in polymer-protein interactions. It also helps in the development of a biomimetic polymer for "smart" applications such as pulsatile drug release systems and controlled bioadhesion by temperature-mediated hydrophilic/hydrophobic switching.

How do biological stimuli modulate conformational changes of biomedical thermoresponsive polymer?

Continuing efforts to develop stimuli-responsive polymers (SRPs) as novel smart materials/biomaterials are anticipated to upgrade the quality life of humans. The details of the molecular, physico chemical and biophysical interactions between SRPs and proteins are not fully understood. Indeed, protein - polymer interactions play a major role in a wide range of biomedical/biomaterial applications. In this regard, we have demonstrated the influence of proteins (β-lactoglobulin (BLG) and stem bromelain (BM) as biological stimuli) on the phase transition behavior of biomedical thermoresponsive poly(N-isopropylacrylamide) (PNIPAM). In order to predict these, we have used a set of biophysical techniques to unveil the influence of biological stimuli on the phase transition behavior of PNIPAM. Absorption spectroscopy, steady-state fluorescence spectroscopy, Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM) were operated at room temperature to examine the changes in absorbance, fluorescence intensity, molecular interactions and surface morphologies, respectively. Furthermore, temperature dependent fluorescence spectroscopy and dynamic light scattering (DLS) studies were also performed to analyze conformational changes, agglomeration behavior, particle size, coil to globule transition and phase behavior. The significant variations obtained in the phase transition temperature values, conformational changes and agglomeration behavior clearly reflects the different molecular interplay induced in presence of biological stimuli. The results demonstrated that the added proteins act as biological stimuli via preferential interactions between the amide group of the polymer and water molecules. The present study can be useful for the design and development of the next generation smart responsive materials/biomaterials.

Influence of additives on thermoresponsive polymers in aqueous media: a case study of poly(N-isopropylacrylamide)

Thermoresponsive polymers (TRPs) in different solvent media have been studied over a long period and are important from both scientific and technical points of view.