How the interaction of PVP-stabilized Ag nanoparticles with models of cellular membranes at the air-water interface is modulated by the monolayer composition

Photocatalytic Degradation of Bacterial Lipopolysaccharides by Peptide-Coated TiO2 Nanoparticles

In this study, we report the degradation of smooth and rough lipopolysaccharides (LPS) from Gram-negative bacteria and of lipoteichoic acid (LTA) from Gram-positive bacteria by peptide-coated TiO2 nanoparticles (TiO2 NPs). While bare TiO2 NPs displayed minor binding to both LPS and LTA, coating TiO2 NPs with the antimicrobial peptide LL-37 dramatically increased the level of binding to both LPS and LTA, decorating these uniformly. Importantly, peptide coating did not suppress reactive oxygen species generation of TiO2 NPs; hence, UV illumination triggered pronounced degradation of LPS and LTA by peptide-coated TiO2 NPs. Structural consequences of oxidative degradation were examined by neutron reflectometry for smooth LPS, showing that degradation occurred preferentially in its outer O-antigen tails. Furthermore, cryo-TEM and light scattering showed lipopolysaccharide fragments resulting from degradation to be captured by the NP/lipopolysaccharide coaggregates. The capacity of LL-37-TiO2 NPs to capture and degrade LPS and LTA was demonstrated to be of importance for their ability to suppress lipopolysaccharide-induced activation in human monocytes at simultaneously low toxicity. Together, these results suggest that peptide-coated photocatalytic NPs offer opportunities for the confinement of infection and inflammation.

Recent Progress in the Applications of Langmuir-Blodgett Film Technology

Langmuir-Blodgett (LB) film technology is an advanced technique for the preparation of ordered molecular ultra-thin films at the molecular level, which transfers a single layer of film from the air/water interface to a solid substrate for the controlled assembly of molecules. LB technology has continually evolved over the past century, revealing its potential applications across diverse fields. In this study, the latest research progress of LB film technology is reviewed, with emphasis on its latest applications in gas sensors, electrochemical devices, and bionic films. Additionally, this review evaluates the strengths and weaknesses of LB technology in the application processes and discusses the promising prospects for future application of LB technology.

The Past and the Future of Langmuir and Langmuir-Blodgett Films

The Langmuir-Blodgett (LB) technique, through which monolayers are transferred from the air/water interface onto a solid substrate, was the first method to allow for the controlled assembly of organic molecules. With its almost 100 year history, it has been the inspiration for most methods to functionalize surfaces and produce nanocoatings, in addition to serving to explore concepts in molecular electronics and nanoarchitectonics. This paper provides an overview of the history of Langmuir monolayers and LB films, including the potential use in devices and a discussion on why LB films are seldom considered for practical applications today. Emphasis is then given to two areas where these films offer unique opportunities, namely, in mimicking cell membrane models and exploiting nanoarchitectonics concepts to produce sensors, investigate molecular recognitions, and assemble molecular machines. The most promising topics for the short- and long-term prospects of the LB technique are also highlighted.

Interactions of model airborne particulate matter with dipalmitoyl phosphatidylcholine and a clinical surfactant Calsurf

HYPOTHESIS

Lung surfactant protects lung tissue and reduces the surface tension in the alveoli during respiration. Particulate matter with an aerodynamic diameter of less than 2.5 μm (PM_2.5), which invades primely through inhalation, can deposit on and interact with the surfactant layer, leading to changes in the biophysical and morphological properties of the lung surfactant.

EXPERIMENTS

Langmuir monolayers of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) and clinical surfactant Calsurf were investigated with a PM_2.5 model injected into the water subphase, which were characterized by surface pressure-area isotherms, Brewster angle microscopy, atomic force microscopy, fluorescent microscopy, and x-ray photoelectron spectroscopy. The binding between DPPC/Calsurf and PM_2.5 was studied using isothermal titration calorimetry.

FINDINGS

PM_2.5 induced the expansion of the monolayers at low surface pressure (п) and film condensation at high п. Aggregation of PM_2.5 mainly occurred at the interface of liquid expanded/liquid condensed (LE/LC) phases. PM_2.5 led to slimmer and ramified LC domains on DPPC and the reduction of nano-sized condensed domains on Calsurf. Both DPPC and Calsurf showed fast binding with PM_2.5 through complex binding modes attributed to the heterogeneity and amphiphilic property of PM_2.5. This study improves the fundamental understanding of PM_2.5-lung surfactant interaction and shows useful implications of the toxicity of PM_2.5 through respiration process.

Peptidoglycans modulating the interaction of a bactericide compound with lipids at the air-water interface

A known monoterpene, named γ-terpineol, was incorporated in mixed Langmuir monolayers composed of dipalmitoyl-phosphoethanolamine (DPPE) and peptidoglycans as a model of microbial membranes. Surface pressure and surface potential isotherms, dynamical surface rheology, Brewster angle microscopy (BAM), and infrared spectroscopy were employed to characterize the compound-membrane interactions. The compound expanded the monolayers denoting repulsive interactions. At 30 mN/m, the monolayer presented lower viscoelastic and in-plane elasticity parameters and an increased all-trans/gauche conformers ratio for the alkyl chains, confirming molecular order. The morphology of the monolayer was analyzed by BAM, which revealed a heterogeneous distribution of γ-terpineol along the mixed monolayer, which tends to segregate. In conclusion, the compound changes the thermodynamic, electric, rheological, morphological, and structural properties of the peptidoglycan-DPPE monolayer, which may be essential to understand, at the molecular level, the action of bioactives in selected membrane models.

A non-mercury electrode for the voltammetric determination of butralin in foods

A modified electrode was developed with Co-Ag bimetallic nanoparticles stabilized in poly(vinylpyrrolidone) for butralin monitoring. This is the first non-mercury electrode proposed for the quantification of butralin. The bimetallic nanoparticles were characterized by spectroscopic and microscopic techniques, which showed that they are composed of a cobalt core partially covered with silver. The modified electrode was characterized by field emission gun scanning electron microscopy, energy dispersive X-ray spectroscopy and electrochemical impedance spectroscopy. The experimental parameters (pH, supporting electrolyte, accumulation step, pulse technique) were optimized. The calibration plot for butralin obtained by square wave voltammetry was linear in the range of 0.1-1.0 μmol L^-1 with limits of detection and quantification of 32 and 106 nmol L^-1, respectively. Lastly, the modified electrode was effectively implemented in the quantification of butralin in honey and apple jam samples. The results were in agreement with those furnished by UV-vis spectrometry and endorsed by statistical tests.

Langmuir films of low-dimensional nanomaterials

A large number of low-dimensional nanomaterials having different shapes and being dispersible in solvents open a fundamental question if there is a universal deposition technique for the monolayer formation. A monolayer formation of various nanomaterials at the air-water interface, also known as a Langmuir film, is a well-established technique even for the large group of the recently developed low-dimensional nanomaterials. In this review, we cover the monolayer formation of the zero-dimensional, one-dimensional and two-dimensional nanomaterials. Thanks to the formation of a Langmuir layer at the thermodynamic equilibrium, by using a suitable nanomaterial dispersion and subphase, the monolayers can be formed from all kinds of materials, ranging from the graphene oxide to the semiconducting quantum dots. In this review, we will discuss the basic requirements for the successful formation of monolayers and summarize the recent scientific advances in the field of Langmuir films.

Chain Cleavage of Bioinspired Bacterial Membranes Photoinduced by Eosin Decyl Ester

Photodynamic therapy (PDT) is promising for bacterial inactivation since cellular internalization of photosensitizers (PS) is not crucial for the treatment effectiveness. Photoinduced damage in the lipid envelope may already induce microbial inactivation, which requires PS capable of easily penetrating into the membrane. Herein, we report on the insertion of the PS eosin decyl ester (EosDec) into Langmuir films of 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), 1,2-dioleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DOPG), and cardiolipin (CLP) used as mimetic systems of bacterial membranes. Surface pressure isotherms and polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) indicated that the hydrophobic nature of EosDec favored deeper penetration in all the phospholipid monolayers. The incorporation of EosDec led to monolayer expansion, especially in the anionic DOPG and CLP owing to repulsive electrostatic interactions, and induced disorder in the lipid chains. Light irradiation of DOPE, DOPG, and CLP monolayers containing EosDec increased the rate of material loss to the subphase, which is attributed to cleavage of lipid chains triggered by contact-dependent reactions between excited states of EosDec and lipid unsaturations. The latter is key for membrane permeabilization and efficiency in microbial inactivation.

Molecular-level effects on cell membrane models to explain the phototoxicity of gold shell-isolated nanoparticles to cancer cells

Metallic nanoparticles are promising agents for photothermal cancer therapy (PTT) owing to their photostability and efficient light-to-heat conversion, but their possible aggregation remains an issue. In this paper, we report on the photoinduced heating of gold shell-isolated nanoparticles (AuSHINs) in in vitro experiments to kill human oropharyngeal (HEp-2) and breast (BT-474 and MCF-7) carcinoma cells, with cell viability reducing below 50 % with 2.2 × 10¹² AuSHINs/mL and 6 h of incubation. This toxicity to cancer cells is significantly higher than in previous works with gold nanoparticles. Considering the AuSHINs dimensions we hypothesize that cell uptake is not straightforward, and the mechanism of action involves accumulation on phospholipid membranes as the PTT target for photoinduced heating and subsequent generation of reactive oxygen species (ROS). Using Langmuir monolayers as simplified membrane models, we confirmed that AuSHINs have a larger effect on 1,2-dioleoyl-sn-glycero-3-phospho-l-serine (DOPS), believed to represent cancer cell membranes, than on 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) taken as representative of healthy eukaryotic cells. In particular, data from polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) revealed an increased conformational order of DOPS tails due to the stronger adsorption of AuSHINs. Furthermore, light irradiation reduced the stability of AuSHINs containing DOPC and DOPS monolayers owing to oxidative reactions triggered by ROS upon photoinduced heating. Compared to DOPC, DOPS lost nearly twice as much material to the subphase, which is consistent with a higher rate of ROS formation in the vicinity of the DOPS monolayer.