Nanozirconia supported ruthenium(0) nanoparticles: Highly active and reusable catalyst in hydrolytic dehydrogenation of ammonia borane

Ultrafast joule-heating-assisted O, N dual-doping of unfunctionalized carbon enhances Ru nanoparticle-catalyzed hydrogen production

The development of a rapid and convenient strategy to regulate the surface microenvironment of inert carbon supports, along with the physicochemical properties of their supported metal nanoparticles, is essential for enhancing catalytic performance. In this study, we describe a straightforward and efficient solid-state microwave method that utilizes a household microwave oven to achieve the co-doping of oxygen and nitrogen in unfunctionalized carbon black (ONCB) using urea as a nitrogen source. The microwave solid-state treatment of commercial carbon black (CB) with urea not only introduces a significant number of heteroatomic functional groups but also substantially increases the pore size and pore volume of the matrix. These enhancements facilitate the uniform growth and dispersion of ultrafine Ru nanoparticles on the surface of ONCB. Consequently, the Ru/ONCB catalyst provides abundant catalytic active sites and mass transfer channels, thereby improving catalytic performance for hydrogen evolution from ammonia borane hydrolysis (ABH). The turnover frequency of Ru/ONCB for ABH reaches 4529 ± 238 min-1 (determined based on Ru dispersion), surpassing a range of analogues and many previously reported carbon-supported Ru catalysts. This study presents a simple and rapid strategy to regulate the surface microenvironment of unfunctionalized carbon support, thereby enhancing the catalytic performance of its supported metal nanoparticles for catalytic hydrogen generation.

Reducible tungsten(VI) oxide-supported ruthenium(0) nanoparticles: highly active catalyst for hydrolytic dehydrogenation of ammonia borane

Reducible WO3 powder with a mean diameter of 100 nm is used as support to stabilize ruthenium(0) nanoparticles. Ruthenium(0) nanoparticles are obtained by NaBH4 reduction of ruthenium(III) precursor on the surface of WO3 support at room temperature. Ruthenium(0) nanoparticles are uniformly dispersed on the surface of tungsten(VI) oxide. The obtained Ru0/WO3 nanoparticles are found to be active catalysts in hydrolytic dehydrogenation of ammonia borane. The turnover frequency (TOF) values of the Ru0/WO3 nanocatalysts with the metal loading of 1.0%, 2.0%, and 3.0% wt. Ru are 122, 106, and 83 min-1, respectively, in releasing hydrogen gas from the hydrolysis of ammonia borane at 25.0 °C. As the Ru0/WO3 (1.0% wt. Ru) nanocatalyst with an average particle size of 2.6 nm provides the highest activity among them, it is extensively investigated. Although the Ru0/WO3 (1.0% wt. Ru) nanocatalyst is not magnetically separable, it has extremely high reusability in the hydrolysis reaction as it preserves 100% of initial catalytic activity even after the 5th run of hydrolysis. The high activity and reusability of Ru0/WO3 (1.0% wt. Ru) nanocatalyst are attributed to the favorable metal-support interaction between the ruthenium(0) nanoparticles and the reducible tungsten(VI) oxide. The high catalytic activity and high stability of Ru0/WO3 nanoparticles increase the catalytic efficiency of precious ruthenium in hydrolytic dehydrogenation of ammonia borane.

Recent Advances and Perspectives on Supported Catalysts for Heterogeneous Hydrogen Production from Ammonia Borane

Ammonia borane (AB), a liquid hydrogen storage material, has attracted increasing attention for hydrogen utilization because of its high hydrogen content. However, the slow kinetics of AB hydrolysis and the indefinite catalytic mechanism remain significant problems for its large-scale practical application. Thus, the development of efficient AB hydrolysis catalysts and the determination of their catalytic mechanisms are significant and urgent. A summary of the preparation process and structural characteristics of various supported catalysts is presented in this paper, including graphite, metal-organic frameworks (MOFs), metal oxides, carbon nitride (CN), molybdenum carbide (MoC), carbon nanotubes (CNTs), boron nitride (h-BN), zeolites, carbon dots (CDs), and metal carbide and nitride (MXene). In addition, the relationship between the electronic structure and catalytic performance is discussed to ascertain the actual active sites in the catalytic process. The mechanism of AB hydrolysis catalysis is systematically discussed, and possible catalytic paths are summarized to provide theoretical considerations for the designing of efficient AB hydrolysis catalysts. Furthermore, three methods for stimulating AB from dehydrogenation by-products and the design of possible hydrogen product-regeneration systems are summarized. Finally, the remaining challenges and future research directions for the effective development of AB catalysts are discussed.

Formation and selected catalytic properties of ruthenium, rhodium, osmium and iridium nanoparticles

The synthesis and applications in catalysis of nanoparticles formed from ruthenium, rhodium, osmium and iridium have been reviewed.

Hydrolytic Dehydrogenation of Ammonia Borane Attained by Ru-Based Catalysts: An Auspicious Option to Produce Hydrogen from a Solid Hydrogen Carrier Molecule

Chemical hydrogen storage stands as a promising option to conventional storage methods. There are numerous hydrogen carrier molecules that afford satisfactory hydrogen capacity. Among them, ammonia borane has attracted great interest due to its high hydrogen capacity. Great efforts have been devoted to design and develop suitable catalysts to boost the production of hydrogen from ammonia borane, which is preferably attained by Ru catalysts. The present review summarizes some of the recent Ru-based heterogeneous catalysts applied in the hydrolytic dehydrogenation of ammonia borane, paying particular attention to those supported on carbon materials and oxides.

Dispersions of Zirconia Nanoparticles Close to the Phase Boundary of Surfactant-Free Ternary Mixtures

The achievement of a homogeneous dispersion of nanoparticles is of paramount importance in supporting their technological application. In wet processing, stable dispersions were largely obtained via surfactant or surface functionalization: although effective, the use of dispersant can alter, or even impair, the functional properties of the resulting nanostructured systems. Herein, we report a novel integrated modeling and experimental approach to obtain stable ZrO₂ nanoparticle (NP) dispersions at native dimensions (about 5 nm) in homogeneous ternary mixtures of solvents (i.e., water, ethanol, and 1,2-dichlorobenzene) without any further surface functionalization. A miscibility ternary diagram was computed exploiting the universal quasi-chemical functional-group activity coefficient (UNIFAC) model, which was then experimentally validated. Dynamic light scattering (DLS) on these mixtures highlights that nanometric structures, resembling nanoemulsion droplets, form close to the mixture two-phase boundary, with a size that depends on the ternary mixture composition. ZrO₂-NPs were then synthesized following a classic sol-gel approach and characterized by XRD and Raman spectroscopy. ZrO₂-NPs were dispersed in HCl and mixed with different mixtures of ethanol and 1,2-dichlorobenzene (DCB), obtaining homogeneous and stable dispersions. These dispersions were then studied by means of DLS as a function of DCB concentration, observing that the nanoparticles can be dispersed at their native dimensions when the mass fraction of DCB was lower than 60%, whereas the increase of the hydrophobic solvent leads to the NPs' agglomeration and sedimentation. The proposed approach not only offers specific guidelines for the design of ZrO₂-NPs dispersions in a ternary solvent mixture but can also be extended to other complex solvent mixtures in order to achieve stable dispersions of nanoparticles with no functionalization.

Cobalt ferrite supported platinum nanoparticles: Superb catalytic activity and outstanding reusability in hydrogen generation from the hydrolysis of ammonia borane

In this work, platinum(0) nanoparticles are deposited on the surface of magnetic cobalt ferrite forming magnetically separable Pt⁰/CoFe₂O₄ nanoparticles, which are efficient catalysts in H₂ generation from the hydrolysis of ammonia borane. Catalytic activity of Pt⁰/CoFe₂O₄ nanoparticles decreases with the increasing platinum loading, parallel to the average particle size. Pt⁰/CoFe₂O₄ (0.23% wt. Pt) nanoparticles have an average diameter of 2.30 ± 0.47 nm and show an extraordinary turnover frequency of 3628 min^-1 in releasing 3.0 equivalent H₂ per mole of ammonia borane from the hydrolysis at 25.0 °C. Moreover, the magnetically separable Pt⁰/CoFe₂O₄ nanoparticles possess high reusability retaining 100% of their initial catalytic activity even after ten runs of hydrolysis. The superb catalytic activity and outstanding reusability make the Pt⁰/CoFe₂O₄ nanoparticles very attractive catalysts for the hydrogen generation systems in portable and stationary fuel cell applications.

Recent developments of nanocatalyzed liquid-phase hydrogen generation

Hydrogen is the most effective and sustainable carrier of clean energy, and liquid-phase hydrogen storage materials with high hydrogen content, reversibility and good dehydrogenation kinetics are promising in view of "hydrogen economy". Efficient, low-cost, safe and selective hydrogen generation from chemical storage materials remains challenging, however. In this Review article, an overview of the recent achievements is provided, addressing the topic of nanocatalysis of hydrogen production from liquid-phase hydrogen storage materials including metal-boron hydrides, borane-nitrogen compounds, and liquid organic hydrides. The state-of-the-art catalysts range from high-performance nanocatalysts based on noble and non-noble metal nanoparticles (NPs) to emerging single-atom catalysts. Key aspects that are discussed include insights into the dehydrogenation mechanisms, regenerations from the spent liquid chemical hydrides, and tandem reactions using the in situ generated hydrogen. Finally, challenges, perspectives, and research directions for this area are envisaged.

Synergism of ultrafine RuCo alloy nanoparticles on graphite carbon nitride for an efficient ammonia borane hydrolysis

Synergism of ultrafine RuCo alloy nanoparticles on graphite carbon nitride were achieved for an efficient ammonia borane hydrolysis.

Ru Nanoparticles Embedded in Cubic Mesoporous Silica SBA-1 as Highly Efficient Catalysts for Hydrogen Generation from Ammonia Borane

Cubic mesoporous silica SBA-1 functionalized with carboxylic acid (-COOH), namely S1B-C10, is used as a support to fabricate and confine Ru nanoparticles (NPs). The uniformly dispersed organic functional groups in SBA-1 are beneficial in attracting Ru cations, and as a result, homogenously distributed small sized Ru NPs are formed within the mesopores. The prepared Ru@S1B-C10 is utilized as a catalyst for H2 generation from the hydrolysis of ammonia borane (AB). The Ru@S1B-C10 catalyst demonstrates high catalytic activity for H2 generation (202 mol H2 molRu min−1) and lower activation energy (24.13 kJ mol−1) due to the small sized Ru NPs with high dispersion and the support’s interconnected mesoporous structure. The nanosized Ru particles provide abundant active sites for the catalytic reaction to take place, while the interconnected porous support facilitates homogenous transference and easy dispersal of AB molecules to the active sites. The catalyst demonstrates good recycle ability since the accumulation and leaking of NPs throughout catalysis can be effectively prevented by the support.

The Recycling of Spent Ammonia Borane with HBr/AlBr3 and Other HX/AlX3 -Based Schemes

Although the development and application of a BNH_x -waste recycling process is one of the major prerequisites for the use of ammonia borane as hydrogen source material, most research groups in the field have focused on AB hydrogen release and only few groups have worked on the development of energetically viable recycling schemes. In our work we target the development of a closed recycling process containing three desired steps: superacid break-up of the BNH_x -waste, catalytic hydrodehalogenation of the generated boron halide, and base-exchange between Et₃ NBH₃ and ammonia. Catalytic hydrodehalogenation provides a convenient means to generate B-H bonds using molecular hydrogen, avoiding potentially energetically expensive reduction reagents.