Co-entrapped, N-doped mesoporous carbons prepared from melamine formaldehyde resins with CoCl2 as template for hydrogen evolution

Tailored interface engineering of Co3Fe7/Fe3C heterojunctions for enhancing oxygen reduction reaction in zinc-air batteries

The rational construction of highly active and robust non-precious metal oxygen reduction electrocatalysts is a vital factor to facilitate commercial applications of Zn-air batteries. In this study, a precise and stable heterostructure, comprised of a coupling of Co3Fe7 and Fe3C, was constructed through an interface engineering-induced strategy. The coordination polymerization of the resin with the bimetallic components was meticulously regulated to control the interfacial characteristics of the heterostructure. The synergistic interfacial effects of the heterostructure successfully facilitated electron coupling and rapid charge transfer. Consequently, the optimized CST-FeCo displayed superb oxygen reduction catalytic activity with a positive half-wave potential of 0.855 V vs. RHE. Furthermore, the CST-FeCo air electrode of the liquid zinc-air battery revealed a large specific capacity of 805.6 mAh gZn-1, corresponding to a remarkable peak power density of 162.7 mW cm-2, and a long charge/discharge cycle stability of 220 h, surpassing that of the commercial Pt/C catalyst.

Melamine-Formaldehyde Polymer-Based Nanocomposite for Sunlight-Driven Photodegradation of Multiple Dyes and Their Mixture

Cadmium sulfide (CdS)-decorated, cross-linked melamine-formaldehyde polymer-based nanocomposite (MFP-CdS) has been synthesized. MFP-CdS is utilized here as a photoactive material for the photodegradation of six model organic dyes and their mixture in an aqueous medium in the presence of sunlight. The half-life values from the kinetic study of multiple dyes strongly support the importance of sunlight on the fast degradation of all six dyes compared to bulb light and control (dark) conditions. A comparative ¹H NMR analysis of the dyes and their degraded products has been performed to support the breakdown of the aromatic framework of organic dyes using MFP-CdS in sunlight. The mechanisms involved in the photodegradation of dyes have been investigated based on radical trapping studies that support the significant involvement of superoxide radicals along with holes. Moreover, the dye removal efficiency using MFP-CdS from real industrial wastewater samples is evaluated via the external spiking of organic dyes and their mixture in unknown industrial effluents where they showed similar photodegradation results. Based on the high recyclability of MFP-CdS, these are used for multiple cycles.

Lacunary polyoxometalate oriented construction of dispersed Ni3S2 confined in WO3 for electrocatalytic water splitting

Manufacturing low-cost, high-performance and earth-rich catalysts for hydrogen evolution (HER) and oxygen evolution reactions (OER) is critical to achieving sustainable green hydrogen production. Herein, we utilize lacunary Keggin-structure [PW₉O₃₄]^9- (PW₉) as a molecular pre-assembly platform to anchor Ni within a single PW₉ molecule by vacancy-directed and nucleophile-induced effects for the uniform dispersion of Ni at the atomic level. The chemical coordination of Ni with PW₉ can avoid the aggregation of Ni and favor the exposure of active sites. The Ni₃S₂ confined by WO₃ prepared from controlled sulfidation of Ni₆PW₉/Nickel Foam (Ni₆PW₉/NF) exhibited excellent catalytic activity in both 0.5 M H₂SO₄ and 1 M KOH solutions, which required only 86 mV and 107 mV overpotentials for HER at a current density of 10 mA∙cm^-2 and 370 mV for OER at 200 mA∙cm^-2. This is attributed to the good dispersion of Ni at the atomic level induced by trivacant PW₉ and the enhanced intrinsic activity by synergistic effect of Ni and W. Therefore, the construction of active phase from the atomic level is insightful to the rational design of dispersed and efficient electrolytic catalysts.

Sustainable synthesis of nitrogen-doped porous carbon with improved electrocatalytic performance for hydrogen evolution

The rational design of a sustainable synthetic pathway to develop carbonaceous materials with efficient electrocatalytic activity for energy conversion is a great challenge.

Rational design of Co embedded N,S-codoped carbon nanoplates as anode materials for high performance lithium-ion batteries

Nanoplates with uniform Co embedded N,S-codoped carbon structures are fabricated which exhibit excellent performances as LIB anode materials.