Hollow mesoporous silica nanotubes modified with palladium nanoparticles for environmental catalytic applications

Two-dimensional Aluminum Oxide Nanosheets Decorated with Palladium Oxide Nanodots for Highly Stable and Selective Hydrogen Sensing

Hydrogen (H₂ ) sensing materials such as semiconductor metal oxides may suffer from poor long-term stability against humidity and unsatisfactory selectivity against other interfering gases. To address the above issues, highly stable and selective H₂ sensing built with palladium oxide nanodots decorating aluminum oxide nanosheets (PdO NDs//Al₂ O₃ NSs) has been achieved via combined template synthesis, photochemical deposition, and oxidation. Typically, the PdO NDs//Al₂ O₃ NSs are observed with thin NSs (≈17 nm thick) decorated with nanodots (≈3.3 nm in diameter). Beneficially, the sensor prototypes built with PdO NDs//Al₂ O₃ NSs show excellent long-term stability for 278 days, high selectivity against interfering gases, and outstanding stability against humidity at 300 °C. Remarkably, the sensor prototypes enable detection of a wide-range of 20 ppm - 6 V/V% H₂ , and the response and recovery times are ≈5 and 16 s to 1 V/V% H₂ , respectively. Theoretically, the heterojunctions of PdO NDs-Al₂ O₃ NSs with a large specific surface ratio and Al₂ O₃ NSs as the support exhibit excellent stability and selective H₂ sensing. Practically, a sensing device integrated with the PdO NDs//Al₂ O₃ NSs sensor prototype is simulated for detecting H₂ with reliable sensing response.

Series of TM-OFs as a Platform for Efficient Catalysis and Multifunctional Luminescence Sensing

Three novel porous transition-metal-organic frameworks (TM-OFs), formulated as [Co₃(DCPN)₂(μ₂-OH₂)₄(H₂O)₄](DMF)₂ (1), [Cd₃(DCPN)₂(μ₂-OH₂)₄(H₂O)₄](DMF)₂ (2), and [CdK(DCPN)(DMA)] (3), have been successfully prepared via solvothermal conditions based on a 5-(3',6'-dicarboxylic phenyl) nicotinic carboxylic acid (H₃DCPN) ligand. 1 and 2 both have the same porous 3D network structure with the point symbol of {4¹⁰·6¹⁴·8⁴}·{4⁵·6}₂ based on trinuclear ({Co₃} or {Cd₃}) clusters, indicating a one-dimensional porous channel, and possess excellent water and thermal stability; 3 also displays a porous 3D network structure with a 4-connected sra topology based on the heteronuclear metal cluster {CdK}. Complex 1 can be used to load Pd nanoparticles (Pd NPs) via a wetness impregnation strategy to obtain Pd@1. The reduction of nitrophenols (2-NP, 3-NP, 4-NP) by Pd@1 in aqueous solution shows outstanding conversion, excellent rate constants (k), and remarkable cycling stability due to the synergistic effect of complex 1 and Pd NPs. Luminescence sensing tests confirmed that 2 is a reliable multifunctional chemical sensor with high selectivity and sensitivity for low concentrations of Fe³⁺, Cr₂O₇^2-, CPFX, and NFX. Specifically, 2 shows a fluorescence enhancement behavior toward fluoroquinolone antibiotics (CPFX and NFX), which has not been reported previously in the literature. Moreover, the rational mechanism of fluorescence sensing was also systematically investigated by various detection means and theoretical calculations.

Functional Nanohybrids and Nanocomposites Development for the Removal of Environmental Pollutants and Bioremediation

World population growth, with the consequent consumption of primary resources and production of waste, is progressively and seriously increasing the impact of anthropic activities on the environment and ecosystems. Environmental pollution deriving from anthropogenic activities is nowadays a serious problem that afflicts our planet and that cannot be neglected. In this regard, one of the most challenging tasks of the 21st century is to develop new eco-friendly, sustainable and economically-sound technologies to remediate the environment from pollutants. Nanotechnologies and new performing nanomaterials, thanks to their unique features, such as high surface area (surface/volume ratio), catalytic capacity, reactivity and easy functionalization to chemically modulate their properties, represent potential for the development of sustainable, advanced and innovative products/techniques for environmental (bio)remediation. This review discusses the most recent innovations of environmental recovery strategies of polluted areas based on different nanocomposites and nanohybrids with some examples of their use in combination with bioremediation techniques. In particular, attention is focused on eco-friendly and regenerable nano-solutions and their safe-by-design properties to support the latest research and innovation on sustainable strategies in the field of environmental (bio)remediation.

Mesoporous ferrihydrite-supported Pd nanoparticles for enhanced catalytic dehalogenation of chlorinated environmental pollutant

Organic chlorides are a group of ubiquitous environmental pollutants that have attracted wide attention because of their carcinogenetic effect on human. Catalytic hydrodechlorination represents one of the most promising methods for the removal of these contaminants, but it suffers from drawbacks such as catalytic inefficiency and/or instability, and the danger of using H₂ as hydrogen source. The relationship between the catalyst structure and its dehalogenation activity has not been completely understood. By combining the advantages of Pd nanocatalyst and mesoporous ferrihydrite (Fh) with its distinctive structure, here we present a new composite material with Pd nanoparticles (NPs) supported onto the Fh (Pd/Fh), which has excellent catalytic dehalogenation performance with a rapid, complete dechlorination of chlorophenol (turnover frequency 25.2 min^-1) and the ability to perform well over a wide range of pH and temperature. The superior catalytic property of Pd/Fh can be attributed to the three unique functions of Fh, including: 1) having abundant hydroxyl groups that provide interaction sites with metals for incorporating highly dispersed small Pd NPs; 2) facilitating the fast adsorption of chlorophenol onto the catalyst surface via hydrogen bonding and importantly, 3) working as an electron mediator to greatly enhance the electron transfer from iron or chemicals (e.g., NaBH₄) to the catalyst, thereby achieving a synergistic effect between Pd catalyst and support, and an enhanced dechlorination activity. In essence, this work presents a promising catalyst for the efficient dehalogenation of chlorinated environmental pollutants and provides an insight into the relationship between catalyst structure and dehalogenation activity.

Pd nanocrystal sensitization two-dimension porous TiO2 for instantaneous and high efficient H2 detection

Hydrogen (H₂) molecules are easy to leak during production, storage, transportation and usage. Because of their flammability and explosive nature, quick and reliable dectection of H₂ molecule is of great significance. Herein, an excellent H₂ gas sensor has been realized based on Pd nanocrystal sensitized two-dimensional (2D) porous TiO₂ (Pd/TiO₂). The formation of 2D porous TiO₂ with the removal of graphene oxide template has been monitored by an in-situ transmission electron microscope. It is found that the size of the GO template can be almost completely replicated by 2D TiO₂. The Pd/TiO₂ sensor exhibited an instantaneous response and a satisfactory low detection limit for H₂ detection. These excellent gas-sensing performances (good selectivity, unique linearity response and high stability) can be attributed to the unique 2D porous structure and the synergistic effect between oxidized Pd and TiO₂, including the unique adsorption properties of O₂ or/and H₂ on Pd/TiO₂, the reaction between PdO and H₂ gas, and the regulated depletion layer arising from p-type PdO to n-type TiO₂. This work demonstrates a rational design and synthesis of highly efficient H₂ sensitive materials for energy and manufacturing security.

Highly effective catalytic reduction of nitrobenzene compounds with gold nanoparticle-immobilized hydroxyapatite nanowire-sintered porous ceramic beads

A catalytic ceramic bead with micron-sized and interconnected porous channels, adjustable porosity, high catalytic activity, and long-term stability is prepared.

Spherical Polyelectrolyte Brushes as Templates to Prepare Hollow Silica Spheres Encapsulating Metal Nanoparticles

Integrating hollow silica spheres with metal nanoparticles to fabricate multifunctional hybrid materials has attracted increasing attention in catalysis, detection, and drug delivery. Here, we report a simple and general method to prepare hollow silica spheres encapsulating silver nanoparticles (Ag@SiO₂) based on spherical polyelectrolyte brushes (SPB), which consist of a polystyrene core and densely grafted poly (acrylic acid) (PAA) chains. SPB were firstly used as nanoreactors to generate silver nanoparticles in situ and then used as sacrificial templates to prepare hybrid hollow silica spheres. The resulted Ag@SiO₂ composites exhibit high catalytic activity and good reusability for the reduction of 4-nitrophenol to 4-aminophenol by NaBH₄. More importantly, this developed approach can be extended to the encapsulation of other metal nanoparticles such as gold nanoparticles into the hollow silica spheres. This work demonstrates that SPB are promising candidates for the preparation of hollow spheres with encapsulated metal nanoparticles and the resulted hybrid spheres show great potential applications in catalysis.

Study on the dissolution of hollow mesoporous silica nanosphere-supported nanosized platinum oxide in biorelevant media for evaluating its potential as chemotherapeutics

Platinum oxide (PtO_x) nanoparticles (NPs) have been shown to possess anticancer activity by releasing ionic Pt species under biological conditions. However, the dissolution kinetics and the changes in the chemical state of Pt during PtO_x dissolution have not yet been studied. To fill this gap, we prepared a composite (designated as PtO_x@MMT-2) containing PtO_x NPs on hollow mesoporous silica nanospheres and studied the dissolution of the material in different biorelevant media. We found that the release of Pt was retarded due to the adsorption of biomolecules on PtO_x NPs during the degradation of host silica. The biomolecules adsorption also lowered the accessibility of PtO_x NPs, resulting in the reduced catalase-like activity of the NPs. In line with the results, the cytotoxicity of PtO_x@MMT-2, which was positively correlated to the amount of Pt uptake, was reduced by biomolecules adsorption. Our findings should be applicable to other metal (oxide) NPs under biological conditions and may provide implications for the design of nanomaterials for practical therapeutic applications.

Clean synthesis of RGO/Mn3O4 nanocomposite with well-dispersed Pd nanoparticles as a high-performance catalyst for hydroquinone oxidation

In this study, a well-dispersed Pd nanoparticle (NP)-supported RGO/Mn₃O₄ (G/M/Pd) composite was synthesized by a clean synthetic route, where galvanic replacement reaction simply occurred between Mn₃O₄ and a palladium salt, thereby avoiding the use of harsh reducing and capping agents. The G/M/Pd composite served as a robust catalyst for the catalytic oxidation of hydroquinone (HQ) to benzoquinone (BQ) with H₂O₂ in an aqueous solution. Oxidation was completed in only 4 min, with a turnover frequency (TOF) of 3613 h^-1; this TOF is one hundred times those of previously reported Pd- and Ag-based catalysts. The superior performance was related to the electronic inductive effect between Mn₃O₄ and Pd NPs, which was verified by density functional theory calculations. Trapping experiments revealed that the oxidation of HQ was considerably related to the ·OH radicals generated from the decomposition of H₂O₂. In addition, the influencing factors were further investigated, including catalyst and HQ concentrations, solution pH, solvents, and various inorganic and organic interferences. Moreover, the G/M/Pd catalyst exhibits diverse applications for the catalytic oxidation of HQ derivatives with high TOFs.

Confinement of Cu nanoparticles in the nanocages of large pore SBA-16 functionalized with carboxylic acid: enhanced activity and improved durability for 4-nitrophenol reduction

Fabrication of a highly active mesoporous silica SBA-16 supported Cu nanocatalyst with superb durability for the reduction of 4-nitrophenol into 4-aminophenol.

Preparation of a magnetic mesoporous Fe3O4–Pd@TiO2 photocatalyst for the efficient selective reduction of aromatic cyanides

Fe₃O₄–Pd@TiO₂ exhibited extremely superior photocatalytic activity for the selective reduction of aromatic cyanides to aromatic primary amines.

Ultra-fine Pd nanoparticles confined in a porous organic polymer: A leaching-and-aggregation-resistant catalyst for the efficient reduction of nitroarenes by NaBH4

Porous organic polymers (POPs) containing nitrogenous substituents have potential practical applications as heterogeneous catalysts based upon controlled porous structure and surface-anchored noble metal nanoparticles (NMNPs). In this work we prepared a POP material from piperazine and cyanuric chloride starting materials (PC-POP). The PC-POP material contains numerous triazinyl moieties, thus rendering the pores hydrophobic. Subsequently, by means of a novel reverse double-solvent approach (RDSA), microdroplets of Pd(AcO)₂/CH₂Cl₂ were introduced into the hydrophobic pores of PC-POP in an aqueous environment; Pd(II) was rapidly reduced by NaBH₄ to form ultra-fine Pd NPs and confined within the pores of PC-POP at high dispersity. The extensive porosity and dispersity of the Pd NPs made the active sites readily accessible, and led to efficient mass transfer. Thus, Pd@PC-POP exhibits superior catalytic performance in catalytic reduction of various nitroarenes. Furthermore, Pd@PC-POP has excellent recyclability, without significant loss of activity nor leaching of Pd active sites during 10 successive reaction cycles. This work points to a practical and cost-effective approach to preparation of POP materials, and also for confining ultra-fine NMNPs in POPs for use as catalysts.