Insight on the plasmonic Z-scheme mechanism underlying the highly efficient photocatalytic activity of silver molybdate/silver vanadate composite in rhodamine B degradation

Effective photocatalytic inactivation of Microcystis aeruginosa by Ag3VO4/BiVO4 heterojunction under visible light

In recent years, photocatalytic technology has been increasingly used for the treatment of algal blooms in water bodies due to its high efficiency and environmental advantages. However, conventional semiconductor materials suffer from high electron-hole recombination rate, low carrier mobility and weak surface adsorption ability, which made their photocatalytic performance limited. Therefore, the photocatalytic performance of the composites can be improved by coupling another semiconductor material to form a heterojunction to accelerate electron transfer. In this study, a novel composite Ag3VO4/BiVO4 (ABV) photocatalyst was successfully prepared by in-situ deposition method for the photocatalytic inactivation of Microcystis aeruginosa (M. aeruginosa) under visible light. The photocatalyst showed excellent photocatalytic activity, and the degradation rate of M. aeruginosa chlorophyll a was up to 99.8% within 4 h under visible light. During the photocatalytic degradation, the morphology of algae cells, the permeability of cell membrane, the organic matter inside and outside the cells, the antioxidant system and the soluble protein were seriously damaged. Moreover, three cycle experiments showed that the prepared ABV photocatalyst had high reusability. Finally, a possible mechanism of M. aeruginosa inactivation was proposed. In general, the synthesized ABV photocatalyst can effectively inactivate cyanobacteria under visible light and provided a new method for M. aeruginosa removal in water.

Jointly augmented photocatalytic NO removal by S-scheme Bi12SiO20/Ag2MoO4 heterojunctions with surface oxygen vacancies

The deep oxidation of NO molecules to NO₃^- species with the avoidance of toxic NO₂ generation is a big and challengeable concern, which can be solved by the rational design and construction of catalytic systems with satisfactory structural and optical features. For such, in this investigation binary composites Bi₁₂SiO₂₀/Ag₂MoO₄ (BSO-XAM) were fabricated through a facile mechanical ball-milling route. From microstructural and morphological analyses, heterojunction structures with surface oxygen vacancies (OVs) were simultaneously created, contributing to the enhanced visible-light absorption, reinforced migration and separation of charge carries, and further boosted generation of reactive species such as superoxide radicals and singlet oxygen. Based on the density-functional theory (DFT) calculations, surface OVs induced the strengthened adsorption and activation of O₂, H₂O, and NO molecules and oxidation of NO to NO₂, while heterojunction structures were beneficial for the continuous oxidation of NO₂ to NO₃^- species. Thus, the heterojunction structures with surface OVs synergistically guaranteed the augmented photocatalytic NO removal and constrained NO₂ generation of BSO-XAM through a typical S-scheme model. This study may provide scientific guidances for the photocatalytic control and removal of NO at ppb level by Bi₁₂SiO₂₀-based composites through the mechanical ball-milling protocol.

A review on plasmonic-based heterojunction photocatalysts for degradation of organic pollutants in wastewater

Organic pollutants in wastewater are the biggest problem facing the world today due to population growth, rapid increase in industrialization, urbanization, and technological advancement. There have been numerous attempts to use conventional wastewater treatment techniques to address the issue of worldwide water contamination. However, conventional wastewater treatment has a number of shortcomings, including high operating costs, low efficiency, difficult preparation, fast recombination of charge carriers, generation of secondary waste, and limited light absorption. Therefore, plasmonic-based heterojunction photocatalysts have attracted much attention as a promising method to reduce organic pollutant problems in water due to their excellent efficiency, low operating cost, ease of fabrication, and environmental friendliness. In addition, plasmonic-based heterojunction photocatalysts contain a local surface plasmon resonance that enhances the performance of photocatalysts by improving light absorption and separation of photoexcited charge carriers. This review summarizes the major plasmonic effects in photocatalysts, including hot electron, local field effect, and photothermal effect, and explains the plasmonic-based heterojunction photocatalysts with five junction systems for the degradation of pollutants. Recent work on the development of plasmonic-based heterojunction photocatalysts for the degradation of various organic pollutants in wastewater is also discussed. Lastly, the conclusions and challenges are briefly described and the direction of future development of heterojunction photocatalysts with plasmonic materials is explored. This review could serve as a guide for the understanding, investigation, and construction of plasmonic-based heterojunction photocatalysts for various organic pollutants degradation.

GRAPHICAL ABSTRACT

Herein, the plasmonic effects in photocatalysts, such as hot electrons, local field effect, and photothermal effect, as well as the plasmonic-based heterojunction photocatalysts with five junction systems for the degradation of pollutants are explained. Recent work on plasmonic-based heterojunction photocatalysts for the degradation of various organic pollutants in wastewater such as dyes, pesticides, phenols, and antibiotics is discussed. Challenges and future developments are also described.

Antibacterial Z-scheme ZnIn2S4/Ag2MoO4 composite photocatalytic nanofibers with enhanced photocatalytic performance under visible light

Considering the biocompatibility of natural proteins and the strong photo-redox capability of Z-scheme heterojunctions, we fabricated Z-scheme ZnIn₂S₄/Ag₂MoO₄@Zein (Z ZA) photocatalytic membranes via electrospinning and in-situ precipitation for enrofloxacin (ENR) degradation. Z ZA exhibit a fiber structure wrapped with ZnIn₂S₄/Ag₂MoO₄ heterojunctions. Photocatalytic studies and various characterization results certified that the Z-scheme structure between ZnIn₂S₄ and Ag₂MoO₄ significantly increases the lifetime and separation efficiency of photogenerated carriers, which in turn enhances the photodegradation of ENR. The degradation rate of Z ZA-10 (ZnIn₂S₄/10 wt% Ag₂MoO₄@Zein) with the highest catalytic activity could reach 100% within 120 min compared with other samples. For ENR degradation, •O₂^- radicals were certified to be the primary active species by trapping experiments, and several possible conversion pathways of ENR in photocatalytic reactions were proposed. Furthermore, the antibacterial rates of Z ZA-20 (ZnIn₂S₄/20 wt% Ag₂MoO₄@Zein) against B. subtilis, P. aeruginosa, S. aureus, and E. coli could reach 90.09%, 89.78%, 84.34%, and 95.31%, respectively. Antibacterial evaluations and cytotoxicity assays demonstrated that Z ZA photocatalytic films had desirable antibacterial properties and low cytotoxicity, rendering them safe and effective for use in the treatment of antibiotic wastewater.

Ag/α-Ag2MoO4/h-MoO3 nanoparticle based microspheres: synthesis and photosensitive properties

We report a new and the most simple strategy for the synthesis of silver molybdate functional composite microspheres based on low molecular weight gelators -amino acids, silver salts and heptamolybdate ions. The resulting material shows a high photocatalytic activity with respect to the methylene blue dye degradation at neutral pH.

Plasmonic Bi-enhanced ammoniated α-MnS/Bi2MoO6 S-scheme heterostructure for visible-light-driven CO2 reduction

Low redox ability and severe photocorrosion limit the photocatalytic activity of metal sulfides. Herein, step-scheme (S-scheme) heterojunction composited by diethylenetriamine (DETA) ammoniated MnS (α-MnS) and Bi₂MoO₆ with Bi surface plasmon resonance (SPR) was successfully fabricated (Bi-5 %M/BMO). This special electron transport structure effectively suppresses the photocorrosion of α-MnS and makes photocatalysts with high redox ability. DETA was protonated to form positively charged ammonium ions and they are easy to combine with acid gas CO₂, reducing the activation energy of CO₂, building an efficient catalytic reaction system, and improving CO₂ reduction efficiency. The CO evolution rate of Bi-5 %M/BMO (61.11 μmol g^-1h^-1) is 2.42, 7.89 and 5.01 times greater than that of 5 %M/BMO, pure α-MnS hollow spheres and Bi₂MoO₆, respectively. This indicates that Bi SPR effect can promote the separation of photon-generated electron-hole pairs dramatically. The ammoniated S-scheme heterostructure decorated with the SPR effect may provide a new perspective to design heterojunction.

In Situ Synthesis, Characterization, and Catalytic Performance of Polypyrrole Polymer-Incorporated Ag2MoO4 Nanocomposite for Detection and Degradation of Environmental Pollutants and Pharmaceutical Drugs

Material combinations of semiconductor with conducting polymer are gaining growing interest due to their enhanced activities in photocatalysis as well as electrochemical sensing. In this present work, we report a facile in situ synthesis of polypyrrole (PPy) polymer-incorporated silver molybdate (Ag₂MoO₄) nanocomposite that is utilized as a photocatalyst and electrocatalyst for the degradation of pollutant heavy metals, namely, methylene blue (MB) and heavy metal (Cr(VI)), and ciprofloxacin (CIP) and for detection of the drug, azomycin. The synthesized nanocomposite was characterized by various theoretical, spectral, and microscopic studies. Matching of the powder X-ray diffraction pattern with JCPDS no. 76-1747 confirmed the formation of α-Ag₂MoO₄/PPy. The surface topography and spherical morphology of the nanocomposite were studied using field emission-scanning electron microscopy and transmission electron microscopy. Fourier transform infrared spectral detail expounds the smooth incorporation of PPy to Ag₂MoO₄. The as-synthesized nanocomposite performs as an efficient photocatalyst in the degradation of MB (99.9%), Cr(VI) (99%), and CIP drug (99.8%) within 10 min. In addition to this, the Ag₂MoO₄/PPy-modified glassy carbon electrode (GCE) demonstrated excellent electrocatalytic activity in terms of a higher cathodic peak current and lower peak potential when compared with other modified and unmodified GCEs for the detection of azomycin. The Ag₂MoO₄/PPy/GCE displayed a broader linear response range and lower detection limit of 0.5-499 μM and 65 nM, respectively. Moreover, other potentially co-interfering compounds, such as a similar functional group-containing biological substances and inorganic species, have no interference effect toward azomycin sensing.

The effective photocatalysis and antibacterial properties of AgBr/Ag2MoO4@ZnO composites under visible light irradiation

A novel Z-scheme AgBr/Ag₂MoO₄@ZnO photocatalyst was fabricated via a hydrothermal process and in situ growth method. X-ray powder diffraction, scanning electron microscopy and transmission electron microscopy were used to determine the structure of the photocatalyst. The results showed that the composites were tightly connected by the (101) lattice plane of ZnO, the (222) plane of Ag₂MoO₄ and the (200) lattice plane of AgBr. Because of the strong redox activity and good separability of photoelectrons and holes induced by the Z-scheme structure, the photodegradation rate for ciprofloxacin (CIP) solution was 80.5% by the photocatalysis of 0.5 AgBr/Ag₂MoO₄@ZnO. In addition, more than 99.999% of Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa cells were killed within 60 min. These results demonstrate that AgBr/Ag₂MoO₄@ZnO is a promising photocatalyst, which can be used in organic pollutant degradation and the photocatalytic antibacterial area.

Renewable biomass derived porous BCN nanosheets and their adsorption and photocatalytic activities for the decontamination of organic pollutants

In this work, the preparation, characterization and removal capabilities of a novel biomass derived BC and its BCN nanocomposites are described. Possessing hierarchically porous structures, extremely large surface areas and special chemical bonds, porous BCN nanosheets have demonstrated advantages in terms of their adsorption and photocatalytic activities. The adsorption and photocatalytic activities of the as-prepared catalysts were evaluated by the degradation of RhB. The best results exhibited 97% and 95% decomposition of RhB which were obtained by using porous BCN-40 nanosheets within 120 min at 25 °C under UV light and visible light (>420 nm) irradiation respectively. The rate constant of the porous BCN-40 nanosheets for the degradation of RhB was more 16 times than that of pure h-BN. Besides, the porous BCN nanosheets showed remarkable cycling stability, maintaining a high photocatalytic activity up to 94% after 5 cycles. Furthermore, the degradation mechanisms of RhB and the photocatalytic mechanism have been explained in this paper.

In this work, the preparation, characterization and removal capabilities of a novel biomass derived BC and its BCN nanocomposites are described.