Controlled hydrothermal synthesis of bismuth oxychloride/bismuth oxybromide/bismuth oxyiodide composites exhibiting visible-light photocatalytic degradation of 2-hydroxybenzoic acid and crystal violet

Photocatalytic Degradation of Crystal Violet on Cu, Zn Doped BiVO4 Particles

Fabrication of codoped photocatalysts is a developing area of research. Herein, we explore the visible light photocatalytic properties of Cu, Zn codoped BiVO4 particles. Doping lower valent cations (Cu and Zn) makes the BiVO4 surface more acidic and enables us to target the basic crystal violet (CV) dye. The adopted hydrothermal protocol of synthesis results in the formation of Cu-Zn codoped monoclinic BiVO4 particles. Undoped monoclinic BiVO4, prepared by the same protocol, showed significant formation of oxygen vacancies. XPS analyses confirm the coexistence of Cu2+/Cu+ and Zn2+ dopants. Increased dopant percentage reduced oxygen vacancies. XRD indicates that Cu2+/Cu+ or Zn2+ dopants generally substitute Bi3+ in BiVO4. All photocatalysis activities for CV degradation are reported under near-neutral pH conditions. A typical codoped BiVO4 photocatalyst with 1% Zn and 2% Cu demonstrated the best CV degradation photocatalytic activity. The activity of this Zn, Cu codoped photocatalyst is better than that of pure, Zn-doped, and Cu-doped BiVO4 samples. Active species trapping experiments indicated the possible photocatalysis mechanism. The photocatalysts exhibited appropriate recyclability and photostability.

Construction of Embedded Sulfur-Doped g-C3N4/BiOBr S-Scheme Heterojunction for Highly Efficient Visible Light Photocatalytic Degradation of Organic Compound Rhodamine B

Constructing S-scheme heterojunction catalysts is a key challenge in visible-light catalysed degradation of organic pollutants. Most heterojunction materials are reported to face significant obstacles in the separation of photogenerated electron-hole pairs owing to differences in the material size and energy barriers. In this study, sulfur-doped g-C3N4 oxidative-type semiconductor materials are synthesized and then coupled with BiOBr reductive-type semiconductor to form S-g-C3N4/BiOBr S-scheme heterojunction. A strong and efficient internal electric field is established between the two materials, facilitating the separation of photogenerated electron-hole pairs. Notably, in situ XPS proved that after visible light irradiation, Bi3+ is converted into Bi(3+ɑ)+, and a large number of photogenerated holes are produced on the surface of BiOBr, which oxidized and activated H2O into •OH.  •OH cooperated with •O2 - and 1O2 to attack Rhodamine B (RhB) molecules to achieve deep oxidation mineralization. The composite material is designed with a LUMO energy level higher than that of RhB, promoting the sensitization of RhB by injecting photogenerated electrons into the heterojunction, thereby enhancing the photocatalytic performance to 22.44 times that of pure g-C3N4. This study provides a new perspective on the efficient degradation of organic molecules using visible light catalysis.

Facile preparation of low temperature carbon dots with long-wavelength emission and their sensing applications for crystal violet

Crystal violet (CV) is one of the main components of common fungicides in daily life, which has inhibitory effect on gram-positive bacteria. However, CV remains in the environment for a long time and have potential risk of disease. Therefore, it is necessary to develop effective methods for detecting CV. Low-temperature carbon dots (LT-CDs) are studied to provide a new idea for the development of CDs green preparation technology from the perspective of low energy consumption. In this experiment, LT-CDs with long-wavelength emission were prepared based on the oxidation, cross-linking polymerization and Schiff base reaction using o-phenylenediamine and hydroquinone as carbon source at low temperature, and were characterized by various techniques. It was found that LT-CDs could be used as a fluorescent probe for quantitative detection of CV based on the inner filter effect, and the practicability of the method was verified by real samples.

Glycerol photocatalytic oxidation to higher value-added compounds via bismuth oxyhalide photocatalysts

Bismuth oxyhalides (BiOX) including BiOCl, BiOBr, and BiOI, were well synthesized using solvothermal technique and then used in the aqueous phase photooxidation of glycerol as a catalyst. The as-synthesized BiOBr could achieve the highest glycerol transformation of around 85.6% in 8 h under ultraviolet light (UV) irradiation among as-synthesized BiOXs. Moreover, the BiOBr/TiO2 heterojunction was also prepared through an ethylene glycol-assisted solvothermal process. This new BiOBr/TiO2 heterostructure exhibited excellent photocatalytic activity (97.4%) for the oxidation of glycerol compared with pure BiOBr (74%) under ultraviolet light irradiation at 6 h. This obtained behavior was confirmed by more produced OH• radicals of BiOBr/TiO2.

Novel fabrication of the recyclable Bi7O9I3/chitosan and BiOI/chitosan heterostructure with improved photocatalytic activity for degradation of dimethyl phthalate under visible light

Among the bismuth oxyhalides, bismuth oxide has the shortest band gap and high absorption power in the visible light region. Dimethyl phthalate (DMP) has been identified as endocrine-disrupting plasticizer and emerging pollutant, which was selected as the target pollutant to evaluate the efficacy of the studied catalytic process. In this work, Bi₇O₉I₃/chitosan and BiOI/chitosan were efficaciously synthesized by the hydrothermal process method. Characterizing prepared photocatalysts was done by employing transmission electron microscopy, X-ray diffraction, scanning electron microscopy energy-dispersive spectroscopy, and diffuse reflectance spectroscopy. For this study, the test design was performed using the Box-Behnken Design (BBD) method in which the variables of pH, Bi₇O₉I₃/chitosan dose, and dimethyl phthalate concentration were examined for the catalytic removal of dimethyl phthalate in the presence of visible light. Our detected results disclosed that the order of efficiency in DMP removal was as follows: Bi₇O₉I₃/chitosan > BiOI/chitosan > Bi₇O₉I₃ > BiOI. Also, the maximum pseudo-first-order kinetic coefficient for Bi₇O₉I₃/chitosan was 0.021 (min)^-1. When the synthesized catalysts were exposed to visible light irradiation, the predominant active species were O₂^- and h⁺ for degradation of DMP. The study on the reuse of Bi₇O₉I₃/chitosan showed that this catalyst could be reused 5 times without significant reduction in efficiency, which indicates the cost-effectiveness and environmental friendliness of using this catalyst.

Photocatalytic CO2 Reduction to CH4 and Dye Degradation Using Bismuth Oxychloride/Bismuth Oxyiodide/Graphitic Carbon Nitride (BiOmCln/BiOpIq/g-C3N4) Nanocomposite with Enhanced Visible-Light Photocatalytic Activity

The use of visible-light-driven photocatalysts in wastewater treatment, photoreduction of CO2, green solar fuels, and solar cells has elicited substantial research attention. Bismuth oxyhalide and its derivatives are a group of visible-light photocatalysts that can diminish electron–hole recombination in layered structures and boost photocatalytic activity. The energy bandgap of these photocatalysts lies in the range of visible light. A simple hydrothermal method was applied to fabricate a series of bismuth oxychloride/bismuth oxyiodide/grafted graphitic carbon nitride (BiOmCln/BiOpIq/g-C3N4) sheets with different contents of g-C3N4. The fabricated sheets were characterized through XRD, TEM, SEM-EDS, XPS, UV-vis DRS, PL, and BET. The conversion efficiency of CO2 reduction to CH4 of BiOmCln/BiOpIq of 4.09 μmol g−1 can be increased to 39.43 μmol g−1 by compositing with g-C3N4. It had an approximately 9.64 times improvement. The photodegradation rate constant for crystal violet (CV) dye of BiOmCln/BiOpIq of k = 0.0684 can be increased to 0.2456 by compositing with g-C3N4. It had an approximately 3.6 times improvement. The electron paramagnetic resonance results and the quenching effects indicated that 1O2, •OH, h+, and •O2− were active species in the aforementioned photocatalytic degradation. Because of their heterojunction, the prepared ternary nanocomposites possessed the characteristics of a heterojunction of type II band alignment.

Construction of Ag2CO3/BiOBr/CdS ternary composite photocatalyst with improved visible-light photocatalytic activity on tetracycline molecule degradation

Photocatalytic degradation was considered as a best strategy for the removal of antibiotic drug pollutants from wastewater. The photocatalyst of ABC (Ag₂CO₃/BiOBr/CdS) composite synthesized by hydrothermal and precipitation method. The ABC composite used to investigate the degradation activity of tetracycline (TC) under visible light irradiation. The physicochemical characterization methods (e.g. scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution-transmission electron microscopy (HR-TEM), ultraviolet visible spectroscopy (UV), photoluminescence (PL) and time resolved photoluminescence (TRPL) clearly indicate that the composite has been construct successfully that enhances the widened visible light absorption, induces charge transfer and separation efficiency of electron - hole pairs. The photocatalytic activity of all samples was examined through photodegradation of tetracycline in aqueous medium. The photocatalytic degradation rate of ABC catalyst could eliminate 98.79% of TC in 70 min, which is about 1.5 times that of Ag₂CO_3, 1.28 times that of BiOBr and 1.1 times that of BC catalyst, respectively. The role of operation parameters like, TC concentration, catalyst dosage and initial pH on TC degradation activity were studied. Quenching experiment was demonstrated that ·OH and O₂^·- were played a key role during the photocatalysis process that was evidently proved in electron paramagnetic resonance (EPR) experiment. In addition, the catalyst showed good activity perceived in reusability and stability test due to the synergistic effect between its components. The mechanism of degradation of TC in ABC composite was proposed based on the detailed analysis. The current study will give an efficient and recyclable photocatalyst for antibiotic aqueous pollutant removal.

2D MoS2/BiOBr van der Waals heterojunctions by liquid-phase exfoliation as photoelectrocatalysts for hydrogen evolution

As a semiconductor used for the photocatalytic hydrogen evolution reaction (HER), BiOBr has received intensive attention in recent years. However, the high recombination of photoexcited charge carriers results in poor photocatalytic efficiency. The combination with other photoactive semiconductors might represent a valuable approach to deal with the intrinsic limitations of the material. Given that BiOBr has a 2D structure, we propose a simple liquid-phase exfoliation method to peel BiOBr microspheres into few-layer nanosheets. By tuning the weight ratio between the precursors, we prepare a series of 2D MoS₂/BiOBr van der Waals (vdW) heterojunctions and study their behaviour as (photo)electrocatalysts for the HER, finding dramatic differences as a function of weight composition. Moreover, we found that pristine 2D BiOBr and the heterojunctions, with the exception of the 1% MoS₂/BiOBr composition, undergo photocorrosion, with BiOBr being reduced to metallic Bi. These findings provide useful guidelines to design novel 2D material-based (photo)electrocatalysts for the production of sustainable fuels.

High-Throughput Strategies for the Design, Discovery, and Analysis of Bismuth-Based Photocatalysts

Bismuth-based nanostructures (BBNs) have attracted extensive research attention due to their tremendous development in the fields of photocatalysis and electro-catalysis. BBNs are considered potential photocatalysts because of their easily tuned electronic properties by changing their chemical composition, surface morphology, crystal structure, and band energies. However, their photocatalytic performance is not satisfactory yet, which limits their use in practical applications. To date, the charge carrier behavior of surface-engineered bismuth-based nanostructured photocatalysts has been under study to harness abundant solar energy for pollutant degradation and water splitting. Therefore, in this review, photocatalytic concepts and surface engineering for improving charge transport and the separation of available photocatalysts are first introduced. Afterward, the different strategies mainly implemented for the improvement of the photocatalytic activity are considered, including different synthetic approaches, the engineering of nanostructures, the influence of phase structure, and the active species produced from heterojunctions. Photocatalytic enhancement via the surface plasmon resonance effect is also examined and the photocatalytic performance of the bismuth-based photocatalytic mechanism is elucidated and discussed in detail, considering the different semiconductor junctions. Based on recent reports, current challenges and future directions for designing and developing bismuth-based nanostructured photocatalysts for enhanced photoactivity and stability are summarized.

Photoreduction of carbon dioxide and photodegradation of organic pollutants using alkali cobalt oxides MCoO2 (M = Li or Na) as catalysts

The recycling of lithium batteries should be prioritized, and the use of discarded alkali metal battery electrode materials as photocatalysts merits research attention. This study synthesized alkali metal cobalt oxide (MCoO₂, M = Li or Na) as a photocatalyst for the photoreduction of CO₂ and degradation of toxic organic substances. The optimized NaCoO₂ and LiCoO₂ photocatalysts increased the photocatalytic CO₂-CH₄ conversion rate to 21.0 and 13.4 μmol g^-1 h^-1 under ultraviolet light irradiation and to 16.2 and 5.3 μmol g^-1 h^-1 under visible light irradiation, which is 17 times higher than that achieved by TiO₂ P25. The rate constants of the optimized reactions of crystal violet (CV) with LiCoO₂ and NaCoO₂ were 2.29 × 10^-2 and 4.35 × 10^-2 h^-1, respectively. The quenching effect of the scavengers and electron paramagnetic resonance in CV degradation indicated that active O₂^•-, ¹O₂, and h⁺ play the main role, whereas ^•OH plays a minor role for LiCoO₂. The hyperfine splitting of the DMPO-^•OH and DMPO-^•CH₃ adducts was a_N = 1.508 mT, a_Hβ = 1.478 mT and a_N = 1.558 mT, a_Hβ = 2.267 mT, respectively, whereas the hyperfine splitting of DMPO^+• was a_N = 1.475 mT. The quenching effect also indicated that active O₂^•- and h⁺ play the main role and that ^•OH and ¹O₂ play a minor role for NaCoO₂. The hyperfine splitting of the DMPO-^•OH and DMPO^+• adducts was a_N = 1.517 mT, a_Hβ = 1.489 mT and a_N = 1.496 mT, respectively. Discarded alkali metal battery electrode materials can be reused as photocatalysts to address environmental pollution.

A facile synthesis of palladium nanoparticles decorated bismuth oxybromide nanostructures with exceptional photo-antimicrobial activities

Assessing the interaction between microbes and nanocatalysts for finding an inclusive, proactive and deep understanding of nanoparticles-based toxicity is vital for discovering their broad range of applications. Palladium based photocatalysts owing to their unique fundamental characteristics and brilliant physicochemical potential have gained immense interest in environment remediation as disinfection system. In the present study, we report synthesis of a novel palladium nanoparticles decorated bismuth oxybromide (Pd/BiOBr) nanostructures using an energy efficient solution-based method, having excellent photocatalytic antibacterial action. The synthesized nanomaterials was thoroughly characterized using various analytical techniques. The photocatalytic antibacterial efficiency of Pd/BiOBr was evaluated against some common pathogenic strains of Gram-positive and Gram-negative bacteria (Pseudomonas fluorescens, Pseudomonas aeruginosa, Escherichia coli, Aeromonas salmonicida, Salmonella typhimurium, Klebsiella pneumoniae, Bacillus subtilis). In our results Pd/BiOBr showed excellent photocatalytic disinfection efficacy with > 99.9% bacterial inactivation. A very low concentration of Pd/BiOBr (0.5 µg/mL) effectively inhibited the bacterial growth in response to just 2 h of visible light irradiation, while 1 µg/mL of Pd/BiOBr completely killed all the tested bacterial strains proving their magnificent bactericidal potential. The developed materials with exceptional antibacterial broad range efficiency can be used in different photocatalytic disinfection systems including water purification systems, biofilm exclusion and combating differential antibiotic resistance.

Recent advances in degradation of organic pollutant in aqueous solutions using bismuth based photocatalysts: A review

Today, a major concern associated with the environment is the water pollution occurred due to the introduction of variety of persistent organic pollutants and residual dyes from different sources (e.g., dye and dye intermediates industries, paper and pulp industries, textile industries, tannery and craft bleaching industries, pharmaceutical industries, etc.) into our natural water resources. Recently, advanced oxidation processes (AOPs) by photocatalyst have garnered great attention as a new frontier promising eco-friendly and sustainable wastewater treatment technology. Utilization of the photocatalytic technology efficiently is significant for cleaner environment. Bismuth based photocatalyst have aroused widespread attention as a visible light responsive photocatalyst for waste water treatment due to their non-toxicity, low cost, modifiable morphology, and outstanding optical and chemical properties. In this review, we have dealt with the research progress on bismuth-based photocatalysts for waste water treatment. However, it seems to give limitation over pristine photocatalysts such as slow migration of charge carriers, charge carrier recombination, low visible light absorption, etc., Various bismuth based photocatalyst and its modifications via doping, heterojunction, Z-scheme etc., are discussed in detail. Further, the strategies adopted to improve the photocatalytic activity of bismuth based photocatalyst to improve the waste water treatment (mostly drugs and dyes) are critically reviewed. Also, we have discussed the bacterial inactivation by bismuth based photocatalyst. Finally, the challenges and future aspects against bismuth based photocatalyst are explored for further research.

Recent advancement in Bi5O7I-based nanocomposites for high performance photocatalysts

Bi₅O₇I belongs to the family of bismuth oxyhalides (BiOX, X = Cl, Br, I), having a unique layered structure with an internal electrostatic field that promotes the separation and transfer of photo-generated charge carriers. Interestingly, Bi₅O₇I exhibits higher thermal stability compared to its other BiOX member compounds and absorption spectrum extended to the visible region. Bi₅O₇I has demonstrated applications in diverse fields such as photocatalytic degradation of various organic pollutants, marine antifouling, etc. Unfortunately, owing to its wide band gap of ∼2.9 eV, its absorption lies mainly in the ultraviolet region, and a tiny portion of absorption lies in the visible region. Due to limited absorption, the photocatalytic performance of pure Bi₅O₇I is still facing challenges. In order to reduce the band gap and increase the light absorption capability of Bi₅O₇I, doping and formation of heterostructure strategies have been employed, which showed promising results in the photocatalytic performance. In addition, the plasmonic heterostructures of Bi₅O₇I were also developed to further boost the efficiency of Bi₅O₇I as a photocatalyst. Here, in this review article, we present such recent efforts made for the advanced development of Bi₅O₇I regarding its synthesis, properties and applications. The strategies for photocatalytic performance enhancement have been discussed in detail. Moreover, in the conclusion section, we have presented the current challenges and discussed possible prospective developments in this field.

Polyvinyl pyrrolidone-coordinated ultrathin bismuth oxybromide nanosheets for boosting photoreduction of carbon dioxide via ligand-to-metal charge transfer

Photoreduction of CO₂ to useful ingredients remains a great challenge due to the high energy barrier of CO₂ activation and poor product selectivity. Herein, Polyvinyl pyrrolidone (PVP) coordinated BiOBr was synthesized by a facile chemical precipitation method at room temperature. The CO₂ photoreduction behaviors of PVP coordinated BiOBr were evaluated with H₂O without sacrificial agent under the simulated sunlight. The evolution rates of CO and CH₄ are 263.2 µmol g^-1h^-1 and 3.3 µmol g^-1h^-1, which are 8 times and 2 times higher than those of pure BiOBr respectively. Furthermore, the coordination of PVP on BiOBr surface enhances greatly the selectivity of product CO, which is close to 100%. Loading PVP onto BiOBr could not only induce and stabilize the oxygen vacancy, but also increase the charge density of BiOBr via the ligand to metal charge transfer (LMCT), which could be beneficial to the adsorption and activation of CO₂ molecule. The photoreduction mechanism of CO₂ for PVP coordinated BiOBr was proposed based on the improved charge density of BiOBr by the experimental results and Density functional theory (DFT) calculations. This finding provides a new pathway to boost the conversion efficiency and selectivity for the activation of CO₂ photoreduction and new molecule insights into the role of PVP in photocatalysis.

Controlled hydrothermal synthesis of BiOxCly/BiOmBrn/g-C3N4 composites exhibiting visible-light photocatalytic activity

The first systematic synthesis of bismuth oxychloride/bismuth oxybromide/graphitic carbon nitride (BiO_xCl_y/BiO_mBr_n/g-C₃N₄) nano-composites used a controlled hydrothermal method. The structure, morphology and characteristic of BiO_xCl_y/BiO_mBr_n/g-C₃N₄ photocatalyst were measured by XRD, UV-vis-DRS, FT-IR, FE-TEM, FE-SEM-EDS, PL, BET, HR-XPS and EPR. Under visible light irradiation, the photodegradation activity was evaluated for the decolorization of crystal violet (CV) and 2-hydroxybenzoic acid (2-HBA) in aqueous solution. The catalytic performance showed that, when using sample BB2C1-4-250-30 wt% g-C₃N₄ composite as a photocatalyst, the best reaction-rate-constant (k) was 0.071 h^-1. It was 1.5 times higher than the k value of BB2C1-4-250 as a photocatalyst. From the scavenging effect of various scavengers, the results of EPR showed that reactive OH was the main scavenger, while O₂^-, h⁺ and ¹O₂ were the second scavenger in CV degradation. In this study, a possible photodegradation mechanism was proposed and discussed. In this work, our method of BiO_xCl_y/BiO_mBr_n/g-C₃N₄ preparation could be used for future mass production and the BiO_xCl_y/BiO_mBr_n/g-C₃N₄ composite materials could be applied to the environmental pollution control in future.

Peroxymonosulfate activation through 2D/2D Z-scheme CoAl-LDH/BiOBr photocatalyst under visible light for ciprofloxacin degradation

The synergistic effect between photocatalytic and peroxymonosulfate (PMS) activation has been widely applied in the field of sewage treatment. In this work, we synthesized a two-dimensional/two-dimensional (2D/2D) CoAl-LDH/BiOBr Z-scheme photocatalyst via a simple method. Then, multiple detection results demonstrated that CoAl-LDH was successfully anchored onto BiOBr, as well as formed an intimate interaction. Moreover, the photocatalytic degradation performance of the catalysts/PMS/vis system had been explored under several conditions (e.g., different catalyst doses, PMS doses, anions and pollutants). The 8 wt% CoAl-LDH/BiOBr composite exhibited the highest degradation efficiency (96%) of ciprofloxacin (CIP). In addition, radicals quenching experiments and electron paramagnetic resonance (EPR) indicated that •O₂- and ¹O₂ were the primary radicals for CIP degradation. The photoelectrochemical measurement and photoluminescence (PL) confirmed that 8 wt% CoAl-LDH/BiOBr exhibited the highest separation and transfer rate of charge carriers. The liquid chromatography-mass spectrometer (LC-MS) analysis revealed that oxidation of the piperazine ring and defluorination were the main CIP degradation pathways. Density functional theory (DFT) calculation, including the laplacian bond order (LBO) and Fukui index, which was consistent with the results of LC-MS. This study explained the superiority of the synergistic effect between photocatalysis and PMS activation on the degradation of pollutants.

Visible-light-driven photocatalysis of carbon dioxide and organic pollutants by MFeO2 (M = Li, Na, or K)

In recent years, lithium-containing ceramic materials have attracted considerable research attention as high-temperature adsorbents of carbon dioxide. The recycling of electrode materials from spent lithium-ion batteries for use as photocatalysts in recovering CO₂ and degrading organic pollutants is worthy of exploration. Solid, magnetic ferrite-containing photocatalysts are easily separated from reaction solutions by using magnetic devices. Solid catalysts (e.g., LiFeO₂, LiFe₅O₈, NaFeO₂, and K₂Fe₂O₄) were prepared through the calcination of Fe₂O₃ and M₂CO₃. CO₂ was photoreduced and crystal violet (CV) and 2-hydroxybenzoic acid (2-HBA) were photodegraded under visible light irradiation. The optimized K₂Fe₂O₄ photocatalyst increased the rate of photocatalytic conversion from CO₂ to methane at 20.9 µmol g^-1 h^-1. The catalytic efficiency indicated that the optimized reaction rate constants of CV with LiFeO₂, NaFeO₂, and K₂Fe₂O₄ were 2.98 × 10^-1, 5.32 × 10^-1, and 4.36 × 10^-1 h^-1, respectively. The quenching effect achieved through the use of various scavengers and the electron paramagnetic resonance in CV degradation revealed the substantial contribution of the reactive superoxide anion radical O₂^- and the minor roles of h⁺ and the OH radical. Its usefulness in the synthesis of solid-base catalyst MFeO₂ is promising for environmental control and relevant applications, particularly in solar energy manufacturing.

Investigation of the efficiency of BiOI/BiOCl composite photocatalysts using UV, cool and warm white LED light sources - Photon efficiency, toxicity, reusability, matrix effect, and energy consumption

BiOI, BiOCl, and their composites (BiOI:BiOCl) with molar ratios from 95:5 to 5:95 were synthesized and tested in the transformation of methyl orange (MO) and sulfamethoxypyridazine (SMP) antibiotic, using three various LED light sources: UV LEDs (398 nm), cool and warm white LEDs (400-700 nm). The 80:20 BiOI:BiOCl photocatalyst showed the best adsorption capacity for MO and enhanced activity compared to BiOI and BiOCl. The apparent quantum yield (Φ_app) of the MO and SMP transformation for cool and warm white light was slightly lower than for 398 nm UV radiation. The effect of methanol and 1,4-benzoquinone proved that the transformation is initiated mainly via direct charge transfer, resulting in the demethylation of MO and SO₂ extrusion from SMP. The change of photocatalytic efficiency was followed during three cycles. After the first one, the transformation rates decreased, but there was no significant difference between the second and third cycles. The decreased efficiency is most probably caused by the intermediates, whose continuous accumulation was observed during the cycles. Ecotoxicity measurements confirmed that no toxic substances were leached from the catalyst, but the transformation of both MO and SMP results in toxic intermediates. Using 80:20 BiOI:BiOCl and LED light source, the energy requirement of the removal is about half of the value determined using TiO₂ and a mercury vapor lamp. The effect of some components of wastewater (Cl^-, HCO₃^- and humic acids), pH, and two matrices on the composite photocatalysts' efficiency and stability were also investigated.

Yellow emissive Se,N-codoped carbon dots toward sensitive fluorescence assay of crystal violet

Crystal violet (CV), a hazardous dye, poses a serious threat to the environment and human health. This motivates us to develop a facile method for its sensitive detection. Herein, we demonstrate a rapid sensing of CV using a novel fluorescent nanomaterial, yellow emissive Se,N-codoped carbon dots (CDs). CDs with an intense photoluminescence peak at 566 nm are synthesized by a hydrothermal technique using selenourea and o-phenylenediamine as precursors. This material shows a high quantum yield of up to 16.7 %. It is found that the yellow fluorescence of CDs can be selectively quenched by CV, which makes them promising for CV sensing. The linearity is obeyed in the range of 0.02-1.60 μM, and the limit of detection is as low as 7.3 nM. After detailed investigations, the inner filter effect is proposed to be the sensing mechanism. For practical usage, the newly built method is applied to determine the trace amount of CV in fish tissue samples, and satisfactory results are obtained.

Fabrication of CdS-SBA-15 nanomaterials and their photocatalytic activity for degradation of salicylic acid under visible light

CdS-SBA-15 nanomaterials were synthesized by solvothermal method using cadmium nitrate as cadmium source and thiourea as sulfur source. The properties of as-prepared materials were characterized by means of XRD, FTIR, TEM, XPS, N₂ physisorption, UV-Vis DRS and PL spectra, etc. The results show as-synthesized materials have partially ordered mesoporous structure, larger specific surface area, and higher content of CdS and good crystallinity. The combination of SBA-15 and CdS did almost no reduction in the absorption light range of CdS, but greatly increased the photocapacity of the composite. The synergistic effect of CdS and SBA-15 leads to improving the photocatalytic degradation activity of salicylic acid under visible light. When the photocatalyst was 30 mg (0.75 g/L) and the concentration of salicylic acid was 10 mg/L, the maximum degradation efficiency of salicylic acid was 84.93% after 6 h of light. Photocatalytic reaction has a lower activation energy (2.90 kJ/mol), activation enthalpy (3.13 kJ/mol) and activation entropy (-281.00 J/(mol K)). The photocatalytic mechanism study demonstrates that superoxide radicals (O₂^•-) are the most key active species, e^- and h⁺ have something to do with the photocatalytic reaction, while ·OH has little to do with the photocatalytic reaction. In sum, the protection effect of SBA-15 on CdS nanomaterials makes the composite have a higher photolumination intensity and a higher photocatalytic activity.

Bismuth-rich bismuth oxyiodide microspheres with abundant oxygen vacancies as an efficient photocatalyst for nitrogen fixation

A combined bismuth-rich and defect introduction strategy was used to prepare the H-Bi₅O₇I with abundant oxygen vacancies, which can effectively yield ammonia under visible light without any organic scavengers or noble-metal cocatalysts.

Characteristics and performance of rutile/anatase/brookite TiO2 and TiO2–Ti2O3(H2O)2(C2O4)·H2O multiphase mixed crystal for the catalytic degradation of emerging contaminants

The as-synthesized rutile/anatase TiO₂ and rutile/anatase/brookite TiO₂–Ti₂O₃(H₂O)₂(C₂O₄)·H₂O, particularly rutile/anatase TiO₂, showed excellent catalytic oxidation of organic contaminants (MO and HBA).

Bismuth-Based Photocatalysts for Solar Photocatalytic Carbon Dioxide Conversion

Photocatalytic CO₂ conversion into solar fuels is an effective means for simultaneously solving both the greenhouse effect and energy crisis. In the past ten years, bismuth-based photocatalysts for environmental remediation have experienced a golden period of development. However, solar photocatalytic CO₂ conversion has only been developed over the past five years and, until now, no reviews have been published on bismuth-based photocatalysts for the photocatalytic conversion of CO₂ . For the first time, solar photocatalytic CO₂ conversion systems are reviewed herein. Synthetic methods and photocatalytic CO₂ performances of bismuth-based photocatalysts, including Sillén-structured BiOX (X=Cl, Br, I); Aurivillius-structured Bi₂ MO₆ (M=Mo, W); and Scheelite-structured BiVO₄ , Bi₂ S₃ , BiYO₃ , and BiOIO₃ , are summarized. In addition, activity-enhancing strategies for this photocatalyst family, including oxygen vacancies, bismuth-rich strategy, facet control, conventional type II heterojunction, Z-scheme heterojunction, and cocatalyst deposition, are reviewed. Finally, the main mechanistic research methods, such as in situ FTIR spectroscopy and theoretical calculations, are presented. Challenges and research trends reported in studies of bismuth-based photocatalysts for photocatalytic CO₂ conversion are discussed and summarized.

Visible-Light-Driven Photocatalytic Activity of Magnetic BiOBr/SrFe12O19 Nanosheets

Magnetic BiOBr/SrFe₁₂O₁₉ nanosheets were successfully synthesized using the hydrothermal method. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and UV-visible diffused reflectance spectra (UV-DRS), and the magnetic properties were tested using a vibration sample magnetometer (VSM). The as-produced composite with an irregular flaky-shaped aggregate possesses a good anti-demagnetization ability (Hc = 861.04 G) and a high photocatalytic efficiency. Under visible light (λ > 420 nm) and UV light-emitting diode (LED) irradiation, the photodegradation rates of Rhodamine B (RhB) using BiOBr/SrFe₁₂O₁₉ (5 wt %) (BOB/SFO-5) after 30 min of reaction were 97% and 98%, respectively, which were higher than that using BiOBr (87%). The degradation rate of RhB using the recovered BiOBr/5 wt % SrFe₁₂O₁₉ (marked as BOB/SFO-5) was still more than 85% in the fifth cycle, indicating the high stability of the composite catalyst. Meanwhile, after five cycles, the magnetic properties were still as stable as before. The radical-capture experiments proved that superoxide radicals and holes were main active species in the photocatalytic degradation of RhB.