Facile synthesis of bimetallic (In,Ga)2(O,S)3 oxy-sulfide nanoflower and its enhanced photocatalytic activity for reduction of Cr(VI)

Correlation between biomedical and structural properties of Zn/Sr modified calcium phosphates

This study investigates the correlation between the biomedical and structural properties of Zn/Sr-modified Calcium Phosphates (ZnSr-CaPs) synthesized via the sol-gel combustion method. X-ray diffraction (XRD) analysis revealed the presence of Ca10(PO4)6(OH)2 (HAp), CaCO3, and Ca(OH)2 phases in the undoped sample, while the additional phase, Ca3(PO4)2 (β-TCP) was formed in modified samples. X-ray absorption near-edge structure (XANES) analysis demonstrated the incorporation of Sr into the lattice, with a preference for occupying the Ca1 sites in the HAp matrix. The introduction of Zn, furthermore, led to the formation of ZnO and CaZnO2 species. The ZnSr-CaPs exhibited significant antibacterial activity attributed to the generation of reactive oxygen species by ZnO, the oxidation reaction of CaZnO2, and the presence of Sr ions. Cytotoxicity tests revealed a correlation between the variation in ZnO content and cellular viability, with lower ZnO concentrations corresponding to higher cell viability. Additionally, the cooperative effects of Zn and Sr ions were found to enhance the bioactivity of CaPs, despite ZnO hindering the apatite formation process. These findings contribute to the deep understanding of the diverse role in modulating the antibacterial, cytotoxic, and bioactive properties of ZnSr-CaPs, offering potential applications in the field of biomaterials.

Single-Step Synthesis of Fe-Doped Ni3S2/FeS2 Nanocomposites for Highly Efficient Oxygen Evolution Reaction

Due to the sluggish kinetic reaction, the electrolytic oxygen evolution reaction (OER) is one of the obstacles in driving overall water splitting for green hydrogen production. In this study, we demonstrate a strategy to improve the OER performance of Ni₃S₂. The effect of addition of different FeCl₂ contents during the hydrothermal process on the OER activity is systematically evaluated. We found that all samples upon the addition of FeCl₂ produced Fe-doped Ni₃S₂ and FeS₂ to form a nanocomposite. Their OER performances strongly depend on the amount of FeCl₂, where the NSF-0.25 catalyst with 0.25 mmol FeCl₂ added during the hydrothermal synthesis shows the best OER performance. Its overpotential was 230 mV versus RHE and it achieves a high current density of 100 mA·cm^-2, which was much lower than that of pristine Ni₃S₂ (320 mV) or RuO₂ (370 mV) as the benchmark OER catalyst. The postcharacterizations reveal that NSF-0.25 has gone through an in situ phase transformation into an Fe-NiOOH phase during the OER test. This study presents a simple method and a low-cost material to improve the OER performance with in situ formation of oxyhydroxide.

Investigation of Antibacterial Activity and Cell Viability of Ag/Mg and Ag/Zn Co-doped Hydroxyapatite Derived from Natural Limestone

Improving the antibacterial activity to avoid infections and keeping the biocompatibility at a safe level of HAp-based materials is highly important for biomedical applications. In this work, we investigate the antibacterial activity of 2.5Ag/2.5Mg co-doped HAp and 2.5Ag/2.5Zn co-doped HAp toward Escherichia coli bacteria. Moreover, their biocompatibility for osteoblastic cells (MC3T3-E1 cells) was also evaluated. The physical properties were characterized with necessary characterization tools such as X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Brunauer-Emmett-Teller. Both 2.5Ag/2.5Mg and 2.5Ag/2.5Zn co-doped HAp consist of hydroxyapatite (HAp) and beta calcium triphosphate (β-TCP) phases. The antibacterial test reveals that 2.5Ag/2.5Mg co-doped HAp or 2.5Ag/2.5Zn co-doped HAp has an outstanding antibacterial activity with a killing rate of 99 ± 1%. More importantly, the cell viability for osteoblast cells with 2.5Ag/2.5Mg and 2.5Ag/2.5Zn co-doped HAp promotes the proliferation much more effectively than 2.5Ag-doped HAp or 5Ag-doped HAp.

Synthesis of hydroxide-enriched cerium-doped oxy-sulfide catalyst for visible light-assisted reduction of Cr(vi)

Semiconductor catalysts are significantly attractive materials for different cutting-edge applications, including the detoxification of toxic pollutants.

Highly efficient In-Mo(O,S)2 oxy-sulfide for degradation of organic pollutants under visible light irradiation: An example of photocatalyst on its dye selectivity

Environmentally toxic organic pollutants, namely methylene blue (MB), neutral red (NR), Rhodamine B (RhB), and methyl orange (MO) dyes contain highly toxic, carcinogenic, non-biodegradable, and colored pigments which cause harm for humans and aquatic organisms even at low concentrations. To detoxify these toxic organic pollutants from the wastewater, the bimetallic solid solution-typed In-Mo(O,S)₂ catalyst with various indium (In) contents were synthesized at low temperature through a simple precipitation method. The morphological, structural, chemical compositions, electrochemical and optical properties of the catalysts were thoroughly characterized. The photodegradation performance of the In-Mo(O,S)₂ catalysts over the cationic, anionic and neutral dyes were studied under visible light irradiation. It has been observed that the photocatalytic activity was enhanced as In was added to the Mo(O,S)₂ catalyst, and In-Mo(O,S)₂-20 was found to be the best composition to completely degrade four organic dyes. The dye degradation had rate constant values of 9.5 × 10^-2 min^-1, 6.3 × 10^-2 min^-1, 4.4 × 10^-2 min^-1, and 15.7 × 10^-1 min^-1 for MB (20 ppm), NR (20 ppm), RhB (10 ppm), and MO (10 ppm) dyes, respectively. The active species for degradation of MB is different from those for RhB and MO. Single phase In-Mo(O,S)₂-20 capable to degrade four kinds of dyes at a fast rate is a good photocatalyst.

Highly efficient visible-light-driven reduction of Cr(vi) from water by porphyrin-based metal–organic frameworks: effect of band gap engineering on the photocatalytic activity

Highly efficient visible-light-assisted photocatalytic reduction of Cr(vi) to Cr(iii) from aqueous phase using Zr(iv)-porphyrin MOFs, Zr₆(μ₃-OH)₈(OH)₈(MTCPP)₂, (PCN-222(M)) (M = H₂, Zn^II, Cu^II, Ni^II, Co^II, Fe^IIICl, and Mn^IIICl) is presented.

Synthesis and application of V2O5-CeO2 nanocomposite catalyst for enhanced degradation of methylene blue under visible light illumination

Methylene blue dye is among the toxic, mutagenic, and carcinogenic pollutants. Hence, its treatment via photocatalytic degradation is an important remediation method for the sake of a healthy environment. Herein, the V₂O₅-CeO₂ nanocomposite catalysts were synthesized via a simple precipitation-thermal decomposition approach and used for the photodegradation of methylene blue in the presence of H₂O₂ as an effective electron scavenger under visible light illumination. The nanocomposite catalysts were systematically characterized to investigate the effects of V₂O₅ with the aids of X-ray, morphology, light absorption, catalytic activity, and charge transfer properties of the nanocomposite catalysts. The VC-2 nanocomposite prepared with NH₄VO₃:CeO₂ molar ratios at 0.15:1 was found to be the best efficient catalyst where ≥98% of methylene blue was degraded within 25 min irradiation time. From the kinetics analysis, its rate constant was found to be higher than those of the pure V₂O₅ and CeO₂ catalysts by a factor of 12.0 and 13.5, respectively. The plausibly mechanistic elucidation of charge transfer and utilization of reactive species are conspicuous allegations of the combined effects of the nanocomposite catalyst, H₂O₂ sacrificial agent, and visible light for the photodegradation of the dye.

Synthesis of oxy-sulfide based nanocomposite catalyst for visible light-driven reduction of Cr(VI)

The oxy-sulfide based V₂O₅@(In,Ga)₂(O,S)₃ nanocomposite catalyst, at different weight percentages of V₂O₅, was successfully synthesized via a simplistic procedural route for the detoxification of hazardous Cr(VI). The two pure catalysts were intimately allied and used for visible light-driven reduction of hazardous Cr(VI). The nanocomposite catalysts were characterized to observe the effects of V₂O₅ on crystal phase, morphology, light absorption, catalytic activity, and electrical properties. Compared to all, 40% V₂O₅ loaded nanocomposite catalyst, designated as VOS-2, exhibited the best-reducing capability. It completely reduced toxic Cr(VI) at 2 min under visible light illumination. From the kinetics, it was found that the rate constant of the nanocomposite catalyst was improved by a factor of 3.6 compared to the host nanoflower catalyst. The plausible mechanism of charge transfer process across the interfacial region indicates the diminished recombination probability of photogenerated charge carriers. Therefore, the nanocomposite catalyst is promising for enhanced reduction of Cr(VI) in the Cr-based industrial activities, which is significantly relevant for environmental remediation.

Highly enhanced photocatalytic Cr(vi) reduction using In-doped Zn(O,S) nanoparticles

Efficient photocatalytic reduction of highly toxic hexavalent chromium pollutants obtained from wastewater has become the focus of research these days due to their ecological and environmental influence.