Flexibility of inactive electrokinetic layer at charged solid-liquid interface in response to bulk ion concentration

Energy harvesting from water streaming at charged surface

Water flowing at a charged surface may produce electricity, known as streaming current/potentials, which may be traced back to the 19th century. However, due to the low gained power and efficiencies, the energy conversion from streaming current was far from usable. The emergence of micro/nanofluidic technology and nanomaterials significantly increases the power (density) and energy conversion efficiency. In this review, we conclude the fundamentals and recent progress in electrical double layers at the charged surface. We estimate the generated power by hydrodynamic energy dissipation in multi-scaling flows considering the viscous systems with slipping boundary and inertia systems. Then, we review the coupling of volume flow and current flow by the Onsager relation, as well as the figure of merits and efficiency. We summarize the state-of-the-art of electrokinetic energy conversions, including critical performance metrics such as efficiencies, power densities, and generated voltages in various systems. We discuss the advantages and possible constraints by the figure of merits, including single-phase flow and flying droplets.

Temperature-dependent dynamics of electrokinetic conservative and reactive transport in porous media: A model-based analysis

Electrokinetic techniques employ direct current electric fields to enhance the transport of amendments in low permeability porous media and have been demonstrated effective for in situ remediation of both organic contaminants and heavy metals. The application of electric potential gradients give rise to coupled chemical, hydraulic and electric fluxes, which are at the basis of the main transport mechanisms: electromigration and electroosmosis. Previous research has highlighted the significant impacts of charge interactions and fluid composition, including temperature-dependent properties such as electrolyte conductivity and density, on these transport phenomena. However, current models of electrokinetic applications often assume isothermal conditions and overlook the production of heat resulting from Joule heating. This study provides a detailed model-based investigation, systematically exploring the effects of temperature on electrokinetic conservative and reactive transport in porous media. By incorporating temperature-dependent material properties and progressively investigating the impact of temperature on each transport mechanism, we analyze the effects of temperature variations in both 1D and 2D systems. The study reveals how temperature dynamically influences the physical, chemical and electrostatic processes controlling electrokinetic transport. A temperature increase results in a higher speed of amendments delivery by both electromigration and electroosmosis and increases the kinetics of degradation reactions. The simulations also reveal a feedback mechanism in which higher aqueous conductivity results in increased Joule heating, leading to a faster temperature rise and, subsequently, to higher electrolyte conductivity. Finally, we estimate the electric energy requirements of the system at varying temperatures and show how these changes impact the rate of contaminant removal.

A theoretical understanding of ionic current through a nanochannel driven by a viscosity gradient

HYPOTHESIS

Different thermodynamic forces owing to the gradient of temperature, electrical potential, or concentration can drive ionic current through charged membranes. It has been recently shown that a viscosity gradient can drive an electrical current through a negatively charged nanochannel (Wiener and Stein, arXiv: 1807.09106). A model description of this phenomenon, based on the Maxwell-Stefan equation will help unravel the dominating physical mechanisms in so-called visco-migration.

THEORY

To understand the physical mechanisms underlying this phenomenon, we employed the Maxwell-Stefan equation to develop a 1D model and obtain a relation between the flux of solvents and the driving forces. Viscosity gradients are known to drive transport, but the development of an electrical current has not been theoretically described prior to this work.

FINDINGS

Our 1D model shows that the ionic current depends on the ideality of the solvent, though both ideal and non-ideal scenarios demonstrated good agreement with experimental data. We employed the model to understand the impact of solution bulk ionic strength and pH on the drift of ionic species with same reservoirs solution properties. Our modeling results unveiled the significant impact of bulk solution properties on the drift of ions which is in agreement with the experiments. Moreover, we have shown that the diffusion gradient along the nanochannel contributes significantly into driving ionic species if we even apply a small ionic concentration gradient to both reservoirs. Our modeling results may pave the way for finding novel applications for drift of ions in a diffusion gradient, which can be induced by connecting reservoirs of different viscosity fluids.

Predictive surface complexation model of the calcite-aqueous solution interface: The impact of high concentration and complex composition of brines

Electrochemical interactions at calcite-water interface are characterized by the zeta potential and play an important role in many subsurface applications. In this work we report a new physically meaningful surface complexation model that is proven to be efficient in predicting calcite-water zeta potentials for a wide range of experimental conditions. Our model uses a two-stage optimization for matching experimental observations. First, equilibrium constants are optimized, and the Stern layer capacitance is optimized in the second stage. The model is applied to a variety of experimental sets that correspond to intact natural limestones saturated with equilibrated solutions of low-to-high salinity, and crushed Iceland Spar sample saturated with NaCl at non-equilibrium conditions. The proposed linear correlation of the Stern layer capacitance with the ionic strength is the main novel contribution to our surface complexation model without which high salinity experiments cannot be modelled. Our model is fully predictive given accurately known conditions. Therefore, the reported parameters and modelling protocol are of significant importance for improving our understanding of the complex calcite-water interfacial interactions. The findings provide a robust tool to predict electrochemical properties of calcite-water interfaces, which are essential for many subsurface applications including hydrology, geothermal resources, CO₂ sequestration and hydrocarbon recovery.

Electroosmotic flow: From microfluidics to nanofluidics

Electroosmotic flow (EOF), a consequence of an imposed electric field onto an electrolyte solution in the tangential direction of a charged surface, has emerged as an important phenomenon in electrokinetic transport at the micro/nanoscale. Because of their ability to efficiently pump liquids in miniaturized systems without incorporating any mechanical parts, electroosmotic methods for fluid pumping have been adopted in versatile applications—from biotechnology to environmental science. To understand the electrokinetic pumping mechanism, it is crucial to identify the role of an ionically polarized layer, the so‐called electrical double layer (EDL), which forms in the vicinity of a charged solid–liquid interface, as well as the characteristic length scale of the conducting media. Therefore, in this tutorial review, we summarize the development of electrical double layer models from a historical point of view to elucidate the interplay and configuration of water molecules and ions in the vicinity of a solid–liquid interface. Moreover, we discuss the physicochemical phenomena owing to the interaction of electrical double layer when the characteristic length of the conducting media is decreased from the microscale to the nanoscale. Finally, we highlight the pioneering studies and the most recent works on electro osmotic flow devoted to both theoretical and experimental aspects.

Temperature effects on electrical double layer at solid-aqueous solution interface

Despite the significant influence of solution temperature on the structure of electrical double layer, the lack of theoretical model intercepts us to explain and predict the interesting experimental observations. In this work, we study the structure of electrical double layer as a function of thermochemical properties of the solution by proposing a phenomenological temperature dependent surface complexation model. We found that by introducing a buffer layer between the diffuse layer and stern layer, one can explain the sensitivity of zeta potential to temperature for different bulk ion concentrations. Calculation of the electrical conductance as function of thermochemical properties of solution reveals the electrical conductance not only is a function of bulk ion concentration and channel height but also the solution temperature. The present work model can provide deep understanding of micro- and nanofluidic devices functionality at different temperatures.

Emerging aqueous two-phase systems: from fundamentals of interfaces to biomedical applications

This review summarizes recent advances of aqueous two-phase systems (ATPSs), particularly their interfaces, with a focus on biomedical applications.

Electroosmotic flow velocity in DNA modified nanochannels

Electroosmotic flow (EOF) is systematically investigated in DNA grafted hard PDMS (h-PDMS) channels with size ranging from 50 nm to 2.5 μm by using the current-slope method. The effects of the DNA types, the incubation time in the process of surface modification, and the pH value, ionic concentration of electrolyte solutions, and the UV (ultraviolet) illumination on the velocity of electroosmotic flow are experimentally studied. It is found that the DNA type and the incubation time of DNAs affect the grafting density and the surface charge on the channel walls, thus influencing the EOF velocity. In the DNA modified channels, the pH effects on EOF velocity become less prominent compared with that in the pristine channels. On the contrary, UV illumination can increase the EOF velocity significantly in the DNA modified channels, whereas takes unapparent effects on EOF velocity in the pristine channels. The effects of ionic concentration on EOF are also studied in this paper. It is observed that EOF velocity is dependent on the channel size when the ionic concentration is low even without overlapped electric double layer (EDL) and is essentially independent of the channel size when the ionic concentration is high. Furthermore, with high ionic concentration and thin EDL, the EOF velocity can be enhanced by the coated DNA brushes on the channel surface.