Noble metal-free NiS2 with rich active sites loaded g-C3N4 for highly efficient photocatalytic H2 evolution under visible light irradiation

Influence of Cocatalysts (Ni, Co, and Cu) and Synthesis Method on the Photocatalytic Activity of Exfoliated Graphitic Carbon Nitride for Hydrogen Production

Exfoliated graphitic carbon nitride (ex-g-CN) was synthesized and loaded with non-noble metals (Ni, Cu, and Co). The synthesized catalysts were tested for hydrogen production using a 300-W Xe lamp equipped with a 395 nm cutoff filter. A noncommercial double-walled quartz-glass reactor irradiated from the side was used with a 1 g/L catalyst in 20 mL of a 10 vol% triethanolamine aqueous solution. For preliminary screening, the metal-loaded ex-g-CN was synthesized using the incipient wetness impregnation method. The highest hydrogen production was observed on the Ni-loaded ex-g-CN, which was selected to assess the impact of the synthesis method on hydrogen production. Ni-loaded ex-g-CN was synthesized using different synthesis methods: incipient wetness impregnation, colloidal deposition, and precipitation deposition. The catalysts were characterized by X-ray powder diffraction, X-ray photoelectron spectroscopy, nitrogen adsorption using the Brunauer-Emmett-Teller method, and transmission electron microscopy. The Ni-loaded ex-g-CN synthesized using the colloidal method performed best with a hydrogen production rate of 43.6 µmol h^-1 g^-1. By contrast, the catalysts synthesized using the impregnation and precipitation methods were less active, with 28.2 and 10.1 µmol h^-1 g^-1, respectively. The hydrogen production performance of the suspended catalyst (440 µmol m^-2 g^-1) showed to be superior to that of the corresponding immobilized catalyst (236 µmol m^-2 g^-1).

Improved polyhydroxybutyrate production by Cupriavidus necator and the photocatalyst graphitic carbon nitride from fructose under low light intensity

The photocatalyst graphitic carbon nitride (g-C₃N₄) is known to photostimulate the production of the bioplastic polyhydroxybutyrate (PHB) by Cupriavidus necator. In previous studies, the combination of C. necator and g-C₃N₄ increased PHB yield from either an organic or inorganic carbon substrate under a light intensity of 4200 lx. Here, different parameters including light intensity, pH, temperature, nitrogen and carbon concentrations, aeration, and inoculum size were explored to maximize PHB production by hybrid photosynthesis from fructose and visible light. A g-C₃N₄/C. necator culture grown with a lower light intensity of 2100 lx, an inoculum size of 128.30 × 10⁶ CFU ml^-1, and constant aeration produced 7.16 g l^-1 d^-1 PHB with a product yield from fructose of 60.94%. Furthermore, the ratio of incident photons harvested by g-C₃N₄ converted into NADPH+H⁺ by C. necator for PHB production was improved to 19.74% after the process optimization. In comparison, the PHB production rate of a non-optimized g-C₃N₄/C. necator system exposed to 4200 lx was only 2.94 g l^-1 d^-1 with a product yield from fructose of 33.29%. These results demonstrate that hybrid photosynthesis productivity can be significantly augmented by decreasing light intensity and adjusting other parameters, which is promising for future bioproduction applications.

Highly dispersed NiS2 quantum dots as a promising cocatalyst bridged by acetylene black significantly improved the photocatalytic H2 evolution performance of g-C3N4 nanosheets

In this work, ternary nanocomposite (CNs-AB/NiS2) as a novel efficient H2 evolution photocatalyst without the use of noble metals was successfully synthesized by depositing acetylene black (AB) and ultra-fine NiS2 nanoparticles on the surface of CNs (g-C3N4) through ultrasonic dispersion and chemical vapor deposition methods, respectively. It was revealed that the loaded AB and NiS2 nanoparticles have significantly improved the photocatalytic H2 evolution efficiency of the CNs by improving the photogenerated electron-hole pair separation, visible light absorption and hydrogen evolution kinetics. Besides acting as a cocatalyst, AB served as a conductive electron bridge between CNs and NiS2, which accelerated the effective transfer of electrons from CNs to NiS2 and improved the H2 evolution kinetics of the NiS2 cocatalyst. The H2 evolution experiments revealed that the ternary photocatalyst CNs-AB/NiS210 displayed a H2 evolution rate of up to 2434.85 μmoL g-1 h-1, which was a 1.41 times enhancement compared to that of the binary composite CNs-NiS210 and was 12.43 times higher than that of the pure CNs. Moreover, the ternary photocatalyst CNs-AB/NiS210 not only exhibited excellent photocatalytic activity and stability in the tests, but provided a novel idea for the development of high-efficiency catalysts free of noble metals as well.

Effects of various alcohol sacrificial agents on hydrogen evolution based on CoS2@SCN nanomaterials and its mechanism

Visible light induced photocatalysis converted solar energy to chemical energy in the form of hydrogen. g-C₃N₄ modified by thermal oxidation etching, doped S, and nonprecious metal cocatalyst CoS₂ (CoS₂@SCN) were used for photocatalytic hydrogen production. And then the charge transfer behavior and mechanism of various alcohol sacrificial agents on hydrogen evolution was analyzed by optical characterization, impedance analysis, Mott-Schottky, and photocurrent tests. The relationship between the structure and catalytic performance was also explored using characterization methods. The results showed that CoS₂ significantly improved the light absorption of g-C₃N₄, and carrier migration and separation. And when the sacrificial agent was triethanolamine, the nanocomposite CoS₂@SCN exhibited best catalytic performance with the highest hydrogen activity of 223.6 μmol g^-1 h^-1, the minimum volume in-phase charge transfer resistance with 55.19 Ω and the maximum photocurrent and photocurrent density with 5.5 μA cm^-2 and 0.63 mA cm^-2. The more negatively charged surface of organic alcohols were, the easier they were to react with holes, thus enhanced charge transfer and hydrogen production efficiency. This report provides guidance for the selection of hydrogen producing sacrificial agents and preparation of highly charge-efficient catalysts. And it also provides a theoretical basis for hydrogen production from wastewater and environmental remediation.

Inhibition of Aspergillus flavus growth and aflatoxins production on peanuts over α-Fe2O3 nanorods under sunlight irradiation

Peanut is an important resource of edible oil and digestible protein in daily life, which is rich in the nutriments and antioxidants such as vitamins, minerals and polyphenols. However, peanut is susceptible to the contamination of Aspergillus flavus (A. flavus), which can produce highly carcinogenic toxins that brings serious threats to human health and food safety. Exploring green and effective methods to control A. flavus is meaningful. Herein, a green and economical way to control A. flavus on peanuts was demonstrated. It was found that the growth of A. flavus hyphae and germination of its spores could be inhibited in the presence of α-Fe₂O₃ nanorods under sunlight irradiation according to the agar diffusion method, flat colony counting method and fluorescence-based live/dead test. The diameter of inhibition zone was 22.3 ± 0.2 mm and the inhibition rate of spores germination was about 60 ± 5%, when the concentration of α-Fe₂O₃ was 10 mg/mL for 7 h sunlight irradiation. Most important, α-Fe₂O₃ showed the photocatalytic inhibition of A. flavus on peanuts under sunlight irradiation with the inhibition rate of about 90 ± 5%, and the production of aflatoxin B₁ and aflatoxin B₂ were reduced by 90 ± 2% and 70 ± 3%, respectively. By comparing the fat contents, protein contents, acid value, peroxide value and antioxidative compositions of peanuts, it was found that there was no obvious effect on the quality of peanuts after inhibition treatment. The findings provide a green, safe and economical strategy to control A. flavus on peanuts, which may be as a promising way to be used in food and agro-food preservation.

Crystal facets engineering and rGO hybridizing for synergistic enhancement of photocatalytic activity of nickel disulfide

Crystal facets engineering and graphene hybridizing have been proved to be effective means to improve the photocatalytic activities of semiconductor photocatalysts in recent years. However, most of these efforts are concentrated in metal oxides. In the present study, crystal facets effect on the photocatalytic activity of metal sulfide NiS₂ was studied for the first time. It was found that the {111}-faceted NiS₂ nanocrystals showed improved photocatalytic activity in the degradation of various typical pollutants in water compared with {100}-faceted NiS₂ nanocrystals. Moreover, through hybridizing with rGO nanosheets, the photocatalytic activity of the {111}-faceted NiS₂ nanocrystals can be further improved, resulting in the complete degradation of heavy metal hexavalent chromium and organic dyes. The photocatalytic mechanism was studied in detail through theory calculation and experimental characterization. It was found that both the surface energies of Ni-terminated and S-terminated {111} facets were much higher than that of {100} facets, indicating that {111} facets were more active. Besides, rGO hybridizing can realize the effective separation of photogenerated electrons and holes. The results provide important guidance for the further development of efficient metal sulfide photocatalysts.

Efficient and Stable Photocatalytic Hydrogen Evolution Activity of Multi-Heterojunction Composite Photocatalysts: CdS and NiS2 Co-modified NaNbO3 Nanocubes

In this study, a NaNbO₃/CdS/NiS₂ ternary composite photocatalyst containing no precious metals was successfully prepared by a simple hydrothermal method. The prepared ternary photocatalyst has a significant improvement in photocatalytic performance of hydrogen production from water splitting under visible light irradiation. The best sample NCN40% hydrogen production rate is 4.698 mmol g⁻¹ h⁻¹, which is about 24.7 times that of pure CdS sample. In addition, the stability of the composite catalyst in the long-term photocatalytic hydrogen production cycle is also improved. The reason for the enhanced hydrogen production performance may be the optimization of the microstructure of the catalyst and the reduction of photogenerated electron-hole recombination. The construction of multi-heterojunctions (NaNbO₃-CdS, CdS–NiS₂, and NaNbO₃-NiS₂) helps to reduce the recombination of carriers. Furthermore, the in-situ-formed NiS₂ nanoparticles can serve as active sites for hydrogen evolution. All of these factors induced the improved photocatalytic activity of the as-prepared ternary photocatalyst.

Nickel-decorated g-C3N4 hollow spheres as an efficient photocatalyst for hydrogen evolution and oxidation of amines to imines

Photocatalysts composed of earth-abundant elements are highly desired for photocatalytic hydrogen evolution as well as oxidation of amines to imines without the requirement of precious metals.

Tailoring of crystalline structure of carbon nitride for superior photocatalytic hydrogen evolution

Light absorption and carrier transfer, are two sequential and complementary steps related to photocatalysis performance, whereas the collective integration of these two aspects into graphitic carbon nitride (g-C₃N₄) photocatalyst through polycondensation optimization have seldom been achieved. Herein, we report on tailoring the crystalline structure of g-C₃N₄ by avoiding the formation of incompletely reacted N-rich intermediates and selective breaking the hydrogen bonds between the layers of g-C₃N₄ simultaneously. The obtained layer plane ordered porous carbon nitride (LOP-CN) material shows efficient photocatalytic H₂ generation performance. The highest H₂ evolution rate achieved is 53.8 μmol under λ ≥ 400 nm light irradiation, which is 7.4 times higher than that of g-C₃N₄ prepared by convention thermal polycondensation. The substantially boosted photocatalytic activity is mainly ascribed to the efficient charge separation on long-range atomic order layer plane and the extended visible light harvesting ability. This work highlights the importance of crystalline structure tailoring in improving charge separation and light absorption of g-C₃N₄ photocatalyst for boosting its photocatalytic H₂ evolution activity.

Photocatalytic degradation of deoxynivalenol over dendritic-like α-Fe₂O₃ under visible light irradiation

Deoxynivalenol (DON) is a secondary metabolite produced by Fusarium, which is a trichothecene mycotoxin. As the main mycotoxin with high toxicity, wheat, barley, corn and their products are susceptible to contamination of DON. Due to the stability of this mycotoxin, traditional methods for DON reduction often require a strong oxidant, high temperature and high pressure with more energy consumption. Therefore, exploring green, efficient and environmentally friendly ways to degrade or reduce DON is a meaningful and challenging issue. Herein, a dendritic-like α-Fe₂O₃ was successfully prepared using a facile hydrothermal synthesis method at 160 °C, which was systematically characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). It was found that dendritic-like α-Fe₂O₃ showed superior activity for the photocatalytic degradation of DON in aqueous solution under visible light irradiation (λ > 420 nm) and 90.3% DON (initial concentration of 4.0 μg/mL) could be reduced in 2 h. Most of all, the main possible intermediate products were proposed through high performance liquid chromatography-mass spectrometry (HPLC-MS) after the photocatalytic treatment. This work not only provides a green and promising way to mitigate mycotoxin contamination but also may present useful information for future studies.

A N-doped graphene–cobalt nickel sulfide aerogel as a sulfur host for lithium–sulfur batteries

Herein, three-dimensional (3D) N-doped reduced graphene oxide (N-rGO) nanosheets were decorated with a uniform distribution of Co–Ni–S (CNS) nanoparticles to form the CNS/N-rGO composite as a sulfur host material for lithium–sulfur batteries. The CNS nanoparticles and N in CNS/N-rGO strongly interact with polysulfides, whereas graphene, as a conductive network, can improve its electrical conductivity. A CNS/N-rGO/sulfur composite cathode was prepared via the sulfur melting diffusion method. The electrochemical study showed that the CNS/N-rGO/sulfur cathode delivered an initial discharge capacity of 1430 mA h g⁻¹ at a current density of 0.1C. Moreover, it retained a specific capacity of 685 mA h g⁻¹ after 300 cycles at 0.5C with a coulombic efficiency of 98%, which was better than that of commercial rGO. This composite was used as a sulfur cathode for a lithium–sulfur battery, exhibiting excellent rate capability and remarkable performance in terms of long cycling stability.

Herein, three-dimensional (3D) N-doped reduced graphene oxide (N-rGO) nanosheets were decorated with a uniform distribution of Co–Ni–S (CNS) nanoparticles to form the CNS/N-rGO composite as a sulfur host material for lithium–sulfur batteries.