Fabrication of highly durable polysiloxane-zinc oxide (ZnO) coated polyethylene terephthalate (PET) fabric with improved ultraviolet resistance, hydrophobicity, and thermal resistance

Quorum Sensing in Gram-Negative Bacteria: Strategies to Overcome Antibiotic Resistance in Ocular Infections

Truly miraculous medications and antibiotics have helped save untold millions of lives. Antibiotic resistance, however, is a significant issue related to health that jeopardizes the effectiveness of antibiotics and could harm everyone's health. Bacteria, not humans or animals, become antibiotic-resistant. Bacteria use quorum-sensing communication routes to manage an assortment of physiological exercises. Quorum sensing is significant for appropriate biofilm development. Antibiotic resistance occurs when bacteria establish a biofilm on a surface, shielding them from the effects of infection-fighting drugs. Acylated homoserine lactones are used as autoinducers by gram-negative microscopic organisms to impart. However, antibiotic resistance among ocular pathogens is increasing worldwide. Bacteria are a significant contributor to ocular infections around the world. Gram-negative microscopic organisms are dangerous to ophthalmic tissues. This review highlights the use of elective drug targets and treatments, for example, combinational treatment, to vanquish antibiotic-resistant bacteria. Also, it briefly portrays anti-biotic resistance brought about by gram-negative bacteria and approaches to overcome resistance with the help of quorum sensing inhibitors and nanotechnology as a promising medication conveyance approach to give insurance of anti-microbials and improve pathways for the administration of inhibitors of quorum sensing with a blend of anti-microbials to explicit target destinations and penetration through biofilms for treatment of ocular infections. It centres on the methodologies to sidestep the confinements of ocular anti-biotic delivery with new visual innovation.

Structural evolution and barrier properties in biaxially stretched polyethylene terephthalate/hydroxy-terminated polybutadiene films

This paper aims to investigate the crystallization and barrier properties of oxygen-scavenging polyethylene terephthalate films (OSP) at different stretching ratios and stretching rates. The results show that with the increase of the stretching ratio, more regular lamellar crystal was formed in the biaxially stretched OSP films, and the amorphous phase thickness between lamellae and the long period decreased. The presence of oxygen scavenger acted as heterogeneous nucleation, further promoting the crystallization of the OSP films. This was conducive to prolong the diffusion path of gas molecules through the film. Furthermore, the increase of the stretching ratio expanded the “active” oxygen barrier area of the oxygen scavengers. Thus, the barrier performance of the biaxially stretched OSP films was improved significantly. In addition, the variation of crystallinity and properties of OSP films with the stretching ratio was consistent with the variation with the stretching rate, but the stretching ratio had a greater impact. It was also found that the increase of the stretching ratio and the introduction of oxygen scavenger both increased the stretching strength of the OSP films, while the biaxially stretched OSP film maintained good optical properties.

Applications of nanotechnology in smart textile industry: A critical review

Background

In recent years, nanotechnology has been playing an important role in designing smart fabrics. Nanomaterials have been employed to introduce in a sustainable manner, antimicrobial, ultraviolet resistant, electrically conductive, optical, hydrophobic and flame-retardant properties into textiles and garments. Nanomaterial based smart devices are now also being integrated with the textiles so as to perform various functions such as energy harvesting and storage, sensing, drug release and optics. These advancements have found wide applications in the fashion industry and are being developed for wider use in defence, healthcare and on-body energy harnessing applications.

Aim of review

The objective of this work is to provide an insight into the current trends of using nanotechnology in the modern textile industries and to inspire and anticipate further research in this field. This review provides an overview of the most current advances concerning on-body electronics research and the wonders which could be realized by nanomaterials in modern textiles in terms of total energy reliance on our clothes.

Key scientific concepts of review

The work underlines the various methods and techniques for the functionalization of nanomaterials and their integration into textiles with an emphasis on cost-effectiveness, comfort, wearability, energy conversion efficiency and eco-sustainability. The most recent trends of developing various nanogenerators, supercapacitors and photoelectronic devices on the fabric are highlighted, with special emphasis on the efficiency and wearability of the textile. The potential nanotoxicity associated with the processed textiles due to the tendency of these nanomaterials to leach into the environment along with possible remediation measures are also discussed. Finally, the future outlook regarding progress in the integration of smart nano-devices on textile fabrics is provided.

Non-Leaching, Rapid Bactericidal and Biocompatible Polyester Fabrics Finished with Benzophenone Terminated N-halamine

Pathogenic bacteria can proliferate rapidly on porous fabrics to form bacterial plaques/biofilms, resulting in potential sources of cross-transmissions of diseases and increasing cross-infection in public environments. Many works on antibacterial modification of cotton fabrics have been reported, while very few works were reported to endow poly(ethylene terephthalate) (PET) fabrics with non-leaching antibacterial function without compromising their innate physicochemical properties though PET is the most widely used fabric. Therefore, it is urgent to impart the PET fabrics with non-leaching antibacterial activity. Herein, a novel N-halamine compound, 1-chloro-3-benzophenone-5,5-dimethylhydantoin (Cl-BPDMH), was developed to be covalently bonded onto PET fabrics, rendering non-leaching antibacterial activity while negligible cytotoxicity based on contact-killing principle. Bacterial was easily adhered to Cl-BPDMH finished PET fabrics, and then it was inactivated quickly within 10 s. Furthermore, the breaking strength, breaking elongation, tearing strength, water vapor permeability, air permeability and whiteness of Cl-BPDMH finished PET fabrics were improved obviously compared to raw PET fabrics. Hence, this work developed a facile approach to fabricate multifunctional synthetic textiles to render outstanding and rapid bactericidal activity without compromising their physicochemical properties and biocompatibility.

Supplementary Information

The online version contains supplementary material available at 10.1007/s42765-021-00100-z.

Influence of Ti-Si-N Nanocomposite Coating on Heat Radiation Resistance of Fireproof Fabrics

Fireproof fabrics are commonly used for protection of fireguards. Such materials must be characterized by improved heat resistance, especially to radiation and flame. In this paper, fireproof fabric (NATAN and PROTON—trademark names) was covered with Ti-Si-N nanocomposite reflective coating using magnetron sputtering. The fabrics were subjected to heat radiation of heat flux density from 0.615 to 2.525 kW/m². A testing stage equipped with a heat source, thermal imaging camera and thermocouples was used. Two variants of the coatings were studied: Ti-Si and (Ti,Si)N considering different thicknesses of layers. The temperature increment and time to reach the pain threshold (60 °C) which corresponds approximately to a 2nd-degree burn according to Henriques criterion were analyzed. In addition, the microstructural analysis of the samples using a scanning electron microscope (SEM) equipped with energy dispersive spectroscopy (EDS) system was performed. The improvement of heat resistance showed for Ti-Si-coated PROTON and NATAN for all tested heat flux densities. Time to reach 60 °C for PROTON fabric increased maximally from 11.23 s (without coating) to 13.13 s (Ti-Si coating) for heat flux density of 0.615 kW/m² and for NATAN—maximally from 7.76 s (without coating) to 11.30 s (Ti-Si coating) for the same heat flux density.

Photocatalytic Behaviour of Zinc Oxide Nanostructures on Surface Activation of Polymeric Fibres

Zinc oxide (ZnO) in various nano forms (nanoparticles, nanorods, nanosheets, nanowires and nanoflowers) has received remarkable attention worldwide for its functional diversity in different fields i.e., paints, cosmetics, coatings, rubber and composites. The purpose of this article is to investigate the role of photocatalytic activity (role of photogenerated radical scavengers) of nano ZnO (nZnO) for the surface activation of polymeric natural fibres especially cotton and their combined effect in photocatalytic applications. Photocatalytic behaviour is a crucial property that enables nZnO as a potential and competitive candidate for commercial applications. The confirmed features of nZnO were characterised by different analytical tools, i.e., scanning electron microscopy (SEM), field emission SEM (FESEM) and elemental detection spectroscopy (EDX). These techniques confirm the size, morphology, structure, crystallinity, shape and dimensions of nZnO. The morphology and size play a crucial role in surface activation of polymeric fibres. In addition, synthesis methods, variables and some of the critical aspects of nZnO that significantly affect the photocatalytic activity are also discussed in detail. This paper delineates a vivid picture to new comers about the significance of nZnO in photocatalytic applications.

Bacteria Adhesion of Textiles Influenced by Wettability and Pore Characteristics of Fibrous Substrates

Bacteria adhesion on the surface is an initial step to create biofouling, which may lead to a severe infection of living organisms and humans. This study is concerned with investigating the textile properties including wettability, porosity, total pore volume, and pore size in association with bacteria adhesion. As model bacteria, Gram-negative, rod-shaped Escherichia coli and the Gram-positive, spherical-shaped Staphylococcus aureus were used to analyze the adhesion tendency. Electrospun webs made from polystyrene and poly(lactic acid) were used as substrates, with modification of wettability by the plasma process using either O2 or C4F8 gas. The pore and morphological characteristics of fibrous webs were analyzed by the capillary flow porometer and scanning electron microscopy. The substrate's wettability appeared to be the primary factor influencing the cell adhesion, where the hydrophilic surface resulted in considerably higher adhesion. The pore volume and the pore size, rather than the porosity itself, were other important factors affecting the bacteria adherence and retention. In addition, the compact spatial distribution of fibers limited the cell intrusion into the pores, reducing the total amount of adherence. Thus, superhydrophobic textiles with the reduced total pore volume and smaller pore size would circumvent the adhesion. The findings of this study provide informative discussion on the characteristics of fibrous webs affecting the bacteria adhesion, which can be used as a fundamental design guide of anti-biofouling textiles.

Low-Temperature Mineralisation of Titania-Siloxane Composite Layers

This paper deals with low-temperature mineralisation of coatings made with titania-siloxane compositions (TSC). Methyltriethoxysilane has been adopted as the precursor for the siloxane, and during its synthesis, an oligomeric siloxane condensate with methyl moieties acting as TiO2 binder has been produced. These methyl moieties, contained in TSC, provide solubility and prevent gelling, but reduce the hydrophilicity of the system, reduce the transfer of electrons and holes generated in the TiO2. In order to avoid these unfavourable effects, TSC mineralisation can be achieved by nonthermal treatment, for example, by using UV-radiation or plasma treatment. Characterisation of the siloxane was performed by gel permeation chromatography (GPC), which showed the size of the siloxane chain. Thermogravimetric analysis revealed a temperature at which the siloxane mineralises to SiO2. Printed layers of two types of TSC with different siloxane contents were studied by a scanning electron microscope (SEM), where a difference in the porosity of the samples was observed. TSC on fluorine-doped tin oxide (FTO) coated glass and microscopic glass were treated with non-thermal UV and plasma methods. TSC on FTO glass were tested by voltammetric measurements, which showed that the non-thermally treated layers have better properties and the amount of siloxane in the TSC has a great influence on their efficiency. Samples on microscopic glass were subjected to a photocatalytic decomposition test of the model pollutant Acid orange 7 (AO7). Non-thermally treated samples show higher photocatalytic activity than the raw sample.

Fabrication and Potential Applications of Highly Durable Superhydrophobic Polyethylene Terephthalate Fabrics Produced by In-Situ Zinc Oxide (ZnO) Nanowires Deposition and Polydimethylsiloxane (PDMS) Packaging

Considerable attention has been devoted to the in-situ deposition of zinc oxide (ZnO) nanowires (ZnO-NWs) on the surface of organic supports, due to their very wide applications in superhydrophobicity, UV shielding, and nanogenerators. However, the poor interfacial bond strength between ZnO-NWs and its support limits their applications. Herein, we developed a facile process to grow robust ZnO-NWs on a polyethylene terephthalate (PET) fabric surface through simultaneous radiation-induced graft polymerization, hydrothermal processing, and in-situ nano-packaging; the obtained materials were denoted as PDMS@ZnO-NWs@PET. The introduction of an adhesion and stress relief layer greatly improved the attachment of the ZnO-NWs to the support, especially when the material was subjected to extreme environment conditions of external friction forces, strong acidic or alkaline solutions, UV-irradiation and even washing with detergent for a long time. The PDMS@ZnO-NWs@PET material exhibited excellent UV resistance, superhydrophobicity, and durability. The ZnO-NWs retained on the fabric surface even after 30 cycles of accelerated washing. Therefore, this process can be widely applied as a universal approach to overcome the challenges associated with growing inorganic nanowires on polymeric support surfaces.

Environmental effects of stratospheric ozone depletion, UV radiation and interactions with climate change: UNEP Environmental Effects Assessment Panel, update 2019

This assessment, by the United Nations Environment Programme (UNEP) Environmental Effects Assessment Panel (EEAP), one of three Panels informing the Parties to the Montreal Protocol, provides an update, since our previous extensive assessment (Photochem. Photobiol. Sci., 2019, 18, 595-828), of recent findings of current and projected interactive environmental effects of ultraviolet (UV) radiation, stratospheric ozone, and climate change. These effects include those on human health, air quality, terrestrial and aquatic ecosystems, biogeochemical cycles, and materials used in construction and other services. The present update evaluates further evidence of the consequences of human activity on climate change that are altering the exposure of organisms and ecosystems to UV radiation. This in turn reveals the interactive effects of many climate change factors with UV radiation that have implications for the atmosphere, feedbacks, contaminant fate and transport, organismal responses, and many outdoor materials including plastics, wood, and fabrics. The universal ratification of the Montreal Protocol, signed by 197 countries, has led to the regulation and phase-out of chemicals that deplete the stratospheric ozone layer. Although this treaty has had unprecedented success in protecting the ozone layer, and hence all life on Earth from damaging UV radiation, it is also making a substantial contribution to reducing climate warming because many of the chemicals under this treaty are greenhouse gases.

Fabrication of new conductive surface-metallized UHMWPE fabric with improved thermal resistance

A new UHMWPE-based conductive fabric was successfully prepared by radiation-induced graft polymerization and subsequent post-modification, followed by electroless deposition. The chemical structure and composition of modified UHMWPE fabrics were investigated in detail by ATR-FTIR, ²⁹Si NMR, and XPS to confirm grafting and post-modification. After electroless deposition, the morphology, thermal stability, and crystal structure of original and modified fabrics were characterized by SEM, TG, DSC and XRD. Cu-deposited UHMWPE fabric exhibited much better thermal resistance than that of UHMWPE and Cu@UHMWPE-g-PAAc. In order to improve the oxidation resistance of copper-deposited fabric, nickel was processed on copper-coated UHMWPE fabric to protect the copper layer. An electromagnetic shielding effect test showed the nickel-copper coated UHMWPE fabric could shield 94.5% of the electromagnetic wave in the frequency range of 8-12 GHz. This work provides an approach for addressing the issue of poor thermal resistance of metal-coated polymeric materials due to the inherent low melting point of the organic support.

Flexible and Thermally Induced Switchable Fire Alarm Fabric Based On Layer-by-Layer Self-Assembled Silver Sheet/Fe3O4 Nanowire Composite

Textiles with fire detection will appeal for the interior decoration of houses and play a critical role in public security. Herein, we fabricated a sandwichlike fire alarm fabric (Ag@Fe₃O₄-MS) based on Fe₃O₄ nanowire (NW) arrays and fish-scale-like silver sheets, designed by in situ layer-by-layer assembly on the surface of polypropylene (PP) nonwoven fabric. The Ag@Fe₃O₄-MS sensor has fish-scale-like silver sheets as self-assembling electrode layers on the upper and lower sides of fabric, which can be tailored into various shapes and integrated into other flexible electronics. The sensor provides a real-time monitoring strategy for early warning fire detection (below 100 °C). At room temperature, the fabricated Ag@Fe₃O₄-MS sensor is electrically insulating, while it switches to an electrical conductor when exposed to flame. In view of its fast response time (2 s) and sustained working time (at least 15 min), the sensor with a connected alarm light can immediately alert people of house fires. More importantly, this sensor can provide additional real-time information on the fire location and reliable real-time monitoring of fire rekindling. The sensor was exposed to fire for successive cycles with an average response of I = 43 mA, confirming the reliable repeatability to detect fires. This ultralight, flexible Ag@Fe₃O₄-MS sensor could have broad applications in home safety. Moreover, the sandwichlike design provides a reliable strategy to modify household fabric items to provide a fire warning function.

Ligand modified cellulose fabrics as support of zinc oxide nanoparticles for UV protection and antimicrobial activities

This work is a critical preventive study for providing a healthy life and enhancing people's safety at work in which introduces of highly efficient and durable UV-protection and antibacterial textiles. With this aim, ZnO nanoparticles are in situ synthesized on the modified cotton fabric to produce the multifunctional fabrics. Herein, the cotton fabric is oxidized by periodate and then treated by 4-aminobenzoic acid ligand (PABA). The modified cotton fabrics are characterized via X-ray powder diffraction, Fourier-transform infrared spectroscopy-attenuated total reflectance, scanning electron microscope, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Moreover, the anti-bacterial, UV-protection, hydrophilicity, and mechanical properties of samples are investigated. The results show that pre-oxidization cotton fabric provides better active sites for the treatment with PABA. Then, PABA treatment provides significant sites for the growth of the ZnO nanoparticles and maintains cross-linking property between oxidized cellulosic fibers and the ZnO nanoparticles which improves the formation and durability of ZnO nanoparticles. The simultaneous sample treatment with ZnO and PABA had synergistic effects on UV protection, stability, and mechanical properties. Moreover, the ZnO PABA oxidized cotton fabrics show excellent UV-protection and significant antibacterial efficacy after 20 washing cycles and 100 abrasion cycles, which can be used in advanced protective textiles.

Zinc Oxide for Functional Textile Coatings: Recent Advances

The use of ZnO for the functionalization of textile substrates is growing rapidly, since it can provide unique multifunctional properties, such as photocatalytic self-cleaning, antimicrobial activity, UV protection, flame retardancy, thermal insulation and moisture management, hydrophobicity, and electrical conductivity. This paper aims to review the recent progress in the fabrication of ZnO-functionalized textiles, with an emphasis on understanding the specificity and mechanisms of ZnO action that impart individual properties to the textile fibers. The most common synthesis and application processes of ZnO to textile substrates are summarized. The influence of ZnO concentration, particle size and shape on ZnO functionality is presented. The importance of doping and coupling procedures to enhance ZnO performance is highlighted. The need to use binding and seeding agents to increase the durability of ZnO coatings is expressed. In addition to functional properties, the cytotoxicity of ZnO coatings is also discussed. Future directions in the use of ZnO for textile functionalization are identified as well.

Growing Nano-SiO2 on the Surface of Aramid Fibers Assisted by Supercritical CO2 to Enhance the Thermal Stability, Interfacial Shear Strength, and UV Resistance

Aramid fibers (AFs) with their high Young′s modulus and tenacity are easy to degrade seriously with ultraviolet (UV) radiation that leads to reduction in their performance, causing premature failure and limiting their outdoor end use. Herein, we report a method to synthesize nano-SiO₂ on AFs surfaces in supercritical carbon dioxide (Sc-CO₂) to simultaneously improve their UV resistance, thermal stability, and interfacial shear strength (IFSS). The effects of different pressures (10, 12, 14, 16 MPa) on the growth of nanoparticles were investigated. The untreated and modified fibers were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). It was found that the nano-SiO₂-decorated fibers exhibited improvement of thermal stability and mechanical properties, and the IFSS of the nano-SiO₂ modified fibers increases by up to 64% compared with the untreated fibers. After exposure to 216 h of UV radiation, the AFs-UV shows a less decrease in tensile strength, elongation to break and tensile modulus, retaining only 73%, 91%, and 85% of the pristine AFs, respectively, while those of AFs-SiO₂-14MPa-UV retain 91.5%, 98%, and 95.5%. In short, this study presents a green method for growing nano-SiO₂ on the surface of AFs by Sc-CO₂ to enhance the thermal stability, IFSS, and UV resistance.

Synthesis, Characterization, and Antibacterial Activity of Ag₂O-Loaded Polyethylene Terephthalate Fabric via Ultrasonic Method

In this study, Ag₂O was synthesized on polyethylene terephthalate fabrics by using an ultrasonic technique with Ag ion reduction in an aqueous solution. The effects of pH on the microstructure and antibacterial properties of the fabrics were evaluated. X-ray diffraction confirmed the presence of Ag₂O on the fabrics. The fabrics were characterized by Fourier transform infrared spectroscopy, ultraviolet⁻visible spectroscopy, and wettability testing. Field-emission scanning electron microscopy verified that the change of pH altered the microstructure of the materials. Moreover, the antibacterial activity of the fabrics against Escherichia coli was related to the morphology of Ag₂O particles. Thus, the surface structure of Ag₂O particles may be a key factor of the antibacterial activity.

Preparation of ZnO nanoparticle loaded amidoximated wool fibers as a promising antibiofouling adsorbent for uranium(vi) recovery

In this study, nano-ZnO loaded amidoxime-functionalized wool fibers (wool-AO@ZnO) were synthesized by radiation-induced copolymerization and in situ co-precipitation as a novel adsorbent with good antibiofouling properties for uranium recovery.