Freestanding hierarchical nickel molybdate@reduced graphene oxide@nickel aluminum layered double hydroxides nanoarrays assembled from well-aligned uniform nanosheets as binder-free electrode materials for high performance supercapacitors

Tuning the interface of MIMII(OH)F@MIMII1-xS (MⅠ: Ni, Co; MⅡ: Co, Fe) by atomic replacement strategy toward high performance overall water splitting

Constructing heterostructure is considered as one of the most promising strategies to reveal high efficiency hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) performance. Nevertheless, it is highly challenging to obtain stable interfaces and sufficient active sites via conventional method. In addition, Ni, Co and Fe elements share the valence electron structures of 3d6-84s2, the appropriate integration of these metals to induce synergistic effect in multicomponent electrocatalysts can enhance electrochemical activity. Herein, in this work, the MIMII(OH)F@MIMII1-xS (NiFe(OH)F@NiFe1-xS, NiCo(OH)F@NiCo1-xS, CoFe(OH)F@CoFe1-xS) autogenous heterostructure on nickel foam are constructed. As a result, NiFe(OH)F@NiFe1-xS-0.05, NiCo(OH)F@NiCo1-xS-0.05, and CoFe(OH)F@CoFe1-xS-0.05 demonstrate outstanding overpotential for HER (70 mV, 90 mV, 81 mV at -10 mA cm-2) and OER (370 mV, 470 mV, 370 mV at 10 mA cm-2) in alkaline electrolyte, while the overpotential for HER is 176 mV, 189 mV, 167 mV at -10 mA cm-2 and corresponding OER is 290 mV, 390 mV, 300 mV at 10 mA cm-2 in simulated seawater, respectively. In addition, the NiFe, NiCo, CoFe-based electrolyzer acquire favorable overall water splitting activity in alkaline (1.72 V, 1.87 V, 1.66 V) and simulated seawater (1.73 V, 1.75 V, 1.69 V) at 10 mA cm-2. Overall, the above results authenticate the feasibility of developing autogenous heterostructure electrocatalysts for providing hydrogen and oxygen in alkaline and simulated seawater.

High-performance aqueous rechargeable nickel//bismuth batteries with Bi2MoO6@rGO and Co0.5Ni0.5MoO4@rGO as electrode materials

Aqueous rechargeable nickel–bismuth batteries have surfaced as a prospective energy storage and conversion system because of their merits of good safety, high power density, and low cost.

Hydrangea-like NiMoO4-Ag/rGO as Battery-type electrode for hybrid supercapacitors with superior stability

It is a great challenge to design electrode materials with good stability and high specific capacitance for supercapacitors. Herein, a three-dimensional (3D) hydrangea-like NiMoO₄ micro-architecture with Ag nanoparticles anchored on the surface has been designed by adding EDTA-2Na, which was assembled with reduced graphene oxide (rGO) and named as NiMoO₄-Ag/rGO composite. Benefiting from the synergetic contributions of structural and componential properties, NiMoO₄-Ag/rGO composite exhibits a high specific capacitance of 566.4 C g^-1 at 1 A g^-1, and great cycling performance with 90.5% capacitance retention after 1000 cycles at 10 A g^-1. The NiMoO₄-Ag/rGO electrode shows an enhanced cycling stability due to the two-dimensional towards two-dimensional (2D-2D) interface coupling between rGO and NiMoO₄ nanosheets, and the stable 3D hydrangea-like micro-architecture. Moreover, NiMoO₄-Ag/rGO with 5-15 nm pore structure and enhanced conductivity exhibits improved charge transfer and ions diffusion. Besides, NiMoO₄-Ag/rGO//AC capacitor displays an outstanding energy density of 40.98 Wh kg^-1 at 800 kW kg^-1, and an excellent cycling performance with 73.3% capacitance retention at 10 A g^-1 after 8000 cycles. The synthesis of NiMoO₄-Ag/rGO composite can provide an effective strategy to solve the poor electrochemical stability and slow electron/ion transfer of NiMoO₄ material as supercapacitors electrode.

Structure-designed synthesis of hollow/porous cobalt sulfide/phosphide based materials for optimizing supercapacitor storage properties and hydrogen evolution reaction

Cobalt-based transition metal phosphides/sulfides have been viewed as promising candidates for supercapacitor (SCs) and hydrogen evolution reaction (HER) featured with their intrinsic merits. Nevertheless, the sluggish reaction kinetics and drastic volume expansion upon electrochemical process hinder their commercial application. In this work, the hollow/porous cobalt sulfide/phosphide based nanocuboids (C-CoP₄ and CoS₂ HNs) with superior specific surface area are achieved by employing a novel chemical etching-phosphatization/sulfuration strategy. The hollow/porous structure could offer rich active sites and shorten electrons/ions diffusion length. In virtue of their structural advantage, the obtained C-CoP₄ and CoS₂ HNs perform superior specific capacitance, fast charge/discharge rate and beneficial cycling stability. The advanced asymmetrical supercapacitors assembled by C-CoP₄ and CoS₂ HNs deliver exceptional energy density, respectively. Furthermore, when employed as hydrogen evolution reaction electrocatalysts, C-CoP₄ and CoS₂ HNs yield favorable electrocatalytic activity. These findings shed fundamental insight on the design of dual-functional transition metal phosphide/sulfide based materials for optimizing hydrogen evolution reaction and supercapacitor storage properties.

Nickel/Cobalt Molybdate Hollow Rods Induced by Structure and Defect Engineering as Exceptional Electrode Materials for Hybrid Supercapacitor

Oxygen defects and hollow structures positively impact pseudocapacitive properties of diffusion/surface-controlled processes, a component of critical importance when building high-performance supercapacitors. Hence, we fabricated hollow nickel/cobalt molybdate rods with O-defects (D-H-NiMoO₄ @CoMoO₄ ) through a soft-template and partial reduction method, enhancing D-H-NiMoO₄ @CoMoO₄ 's electrochemical performance, yielding a specific capacitance of 1329 F g^-1 , and demonstrating excellent durability with 95.8 % capacity retention after 3000 cycles. D-H-NiMoO₄ @CoMoO₄ was used as the positive electrode to construct an asymmetric supercapacitor, displaying an energy density of up to 34.13 Wh kg^-1 and demonstrating good predisposition towards practical applications. This work presents an effective approach to fabricate and use hollow nickel/cobalt molybdate rods with O-defects as pseudocapacitor material for high-performance capacitive energy storage devices.

Electrochemical sensor for rutin detection based on N-doped mesoporous carbon nanospheres and graphene

A new electrochemical sensor shows great sensing performance to rutin and high selectivity towards even 13 interfering species and realizes detection of rutin in real samples such as human serum.

Bimetallic FeNi-MIL-88-derived NiFe2O4@Ni–Mn LDH composite electrode material for a high performance asymmetric supercapacitor

A novel NiFe₂O₄@Ni–Mn LDH/NF composite was synthesized by deriving bimetallic FeNi-MIL-88, and has potential application as a high-performance supercapacitor.

Hydrothermal synthesis of cobalt telluride nanorods for a high performance hybrid asymmetric supercapacitor

Cobalt telluride nanostructured materials have demonstrated various applications, particularly in energy generation and storage. A high temperature and reducing atmosphere are required for the preparation of cobalt telluride-based materials, which makes this a difficult and expensive process. The development of a facile route for producing the desirable nanostructure of cobalt telluride remains a great challenge. We demonstrated a simple hydrothermal method for preparing cobalt telluride nanorods (CoTe NRs) and telluride nanorods (Te NRs) for supercapacitor applications. The morphology of CoTe NRs and Te NRs was analyzed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The prepared CoTe NR electrode material exhibited a high specific capacity of 170 C g⁻¹ at a current density of 0.5 A g⁻¹ with an exceptional cyclic stability. The asymmetric supercapacitor was assembled using CoTe NRs and orange peel-derived activated carbon (OPAA-700) as a positive and negative electrode, respectively. The fabricated device delivered a high energy density of 40.7 W h kg⁻¹ with a power density of 800 W kg⁻¹ at 1 A g⁻¹ current density. When the current density was increased to 30 A g⁻¹, the fabricated device delivered a high power density of 22.5 kW kg⁻¹ with an energy density of 16.3 W h kg⁻¹. The fabricated asymmetric supercapacitor displayed a good cyclic stability performance for 10 000 cycles at a high current density of 30 A g⁻¹ and retained 85% of its initial capacity for after 10 000 cycles. The prepared materials indicate their applicability for high performance energy storage devices.

A one-step hydrothermal derived cobalt telluride nanorods and activated carbon-based hybrid asymmetric supercapacitor delivered a high energy (40.7 W h kg⁻¹) and power density (22.5 kW kg⁻¹) with an electrochemical stability of 85% for 10000 cycles.

Facile Dual-Ligand Modulation Tactic toward Nickel-Cobalt Sulfides/Phosphides/Selenides as Supercapacitor Electrodes with Long-Term Durability and Electrochemical Activity

The use of high electrochemical active binary nickel-cobalt sulfides/phosphides/selenides (Ni-Co-X, X = S, P, Se) as electrochemical energy storage materials still has a space for improvement because they become electrochemically unstable during long-term use. Herein, a facile and cost-effective dual-ligand synergistic modulation tactic is described to substantially improve the durability of Ni-Co-X (X = S, P, Se) at the atomic level by partially substituting S, P, and Se ligands into the nickel-cobalt hydroxide precursor, respectively. Remarkably, the dual-ligand electrodes on Ni-foam achieve superior durability and high electrochemical activity when used as positive electrodes in supercapacitors. Impressively, the density functional theory calculations demonstrate that the OH ligand in NiCo₂(MOH)_x (M = S, P, Se) could attract electrons from metal-S/metal-P/metal-Se bonds to the metal-O bond, enhancing the binding energy of metal-S/metal-P/metal-Se bonds and improving the long-term durability of Ni-Co-X (X = S, P, Se) in alkaline electrolytes. Moreover, OH and S/P/Se ligands could effectively alter the electron structure and result in favorable electrochemical activity. Overall, this tactic could offer an exciting avenue to achieve long-term durability and electrochemical activity of supercapacitor electrodes simultaneously.

Mo-Based crystal POMOFs with a high electrochemical capacitor performance

The capacitor performance of newly synthesized crystalline POMOFs was higher than those of the majority of reported POMOF-, state-of-the-art MOF- and POM-based materials.

Fabrication of double-shell hollow NiO@N-C nanotubes for a high-performance supercapacitor

Rational fabrication of carbon-based materials hybridized with transition-metal oxides is crucial for the design of supercapacitor electrodes with superior properties.