Branched alkyldimethylamine oxide surfactants: An effective strategy for the design of high concentration/low viscosity surfactant formulations

Synthesis of new defoamer agents and characterization of cementitious formulations

The production of cementitious formulations involves the addition of chemical additives essential for the optimization of many properties. Superplasticizers are considered additives of great interest but when mixed with concrete they lead to an undesirable increase of air content, with the consequent development of foam. This can adversely affect both mechanical properties and workability, therefore, the use of an antifoam agent is also necessary which should be able to prevent or destroy the foam. This work aims to synthesize esters derived from the reaction of glycine betaine with saturated and unsaturated fatty alcohols of different chain lengths. The reaction products were analyzed by 1H NMR analysis, and the stability of antifoam agents in a superplasticizer solution was studied through foaming tests according to the Ross-Miles method. At the same time, their effectiveness in the cementitious systems was evaluated through flow Table tests. Finally, the effectiveness of the antifoam agents was quantified through an image analysis software, Image J, which allowed the investigation of the contents of the bubble in concrete samples. All synthesized antifoams showed properties superior to the commercial product, especially defoamers containing saturated fatty alcohols. It has been found that alcohols with too small or too long carbon chains were not effective. In particular, it was verified the optimal range of carbon atoms number contained in the antifoam chain which included between 12 and 14.

Water Sorption and Structural Properties of Human Airway Mucus in Health and Muco-Obstructive Diseases

Muco-obstructive diseases change airway mucus properties, impairing mucociliary transport and increasing the likelihood of infections. To investigate the sorption properties and nanostructures of mucus in health and disease, we investigated mucus samples from patients and cell cultures (cc) from healthy, chronic obstructive pulmonary disease (COPD), and cystic fibrosis (CF) airways. Atomic force microscopy (AFM) revealed mucin monomers with typical barbell structures, where the globule to spacer volume ratio was the highest for CF mucin. Accordingly, synchrotron small-angle X-ray scattering (SAXS) revealed more pronounced scattering from CF mucin globules and suggested shorter carbohydrate side chains in CF mucin and longer side chains in COPD mucin. Quartz crystal microbalance with dissipation (QCM-D) analysis presented water sorption isotherms of the three types of human airway mucus, where, at high relative humidity, COPD mucus had the highest water content compared to cc-CF and healthy airway mucus (HAM). The higher hydration of the COPD mucus is consistent with the observation of longer side chains of the COPD mucins. At low humidity, no dehydration-induced glass transition was observed in healthy and diseased mucus, suggesting mucus remained in a rubbery state. However, in dialyzed cc-HAM, a sorption-desorption hysteresis (typically observed in the glassy state) appeared, suggesting that small molecules present in mucus suppress the glass transition.

Effects of Counterion on the Formation and Hydration Behavior of α-Form Hydrated Crystals (α-Gels)

α-Form hydrated crystals form a lamellar gel in which the alkyl chains of the amphiphilic molecules are hexagonally arranged within bilayers below the gel-liquid crystal phase transition temperature. In practice, the lamellar gel network with excess water is called an "α-gel", particularly in the cosmetics industry. In this study, the hydration or water sorption of amphiphilic materials in water vapor was assessed using a humidity-controlled quartz crystal microbalance with dissipation monitoring (QCM-D) technique. The amphiphilic materials used in this study were hexadecyl phosphate salts neutralized with L-arginine (C16P-Arg), CsOH (C16P-Cs), KOH (C16P-K), and NaOH (C16P-Na). Small- and wide-angle X-ray scattering measurements revealed that C16P-Arg and C16P-Cs yielded α-form hydrated crystals. Humidity-controlled QCM-D measurements demonstrated that C16P-Arg and C16P-Cs more readily underwent hydration or water sorption than C16P-K and C16P-Na. The key conclusion is that the significant hydration ability of C16P-Arg and C16P-Cs promotes the formation of the corresponding α-form hydrated crystals.

Anti-corrosive non-aqueous DBSA/MEA lamellar liquid crystal lubrication system

HYPOTHESIS

Since lamellar liquid crystals (LLCS) could be used for lubrication, many LLCS systems have been constructed to improve lubrication performance. However, most studies focused on the LLCS of the water system, and its corrosiveness brought some limitations to its application. Therefore, it is necessary to construct a non-aqueous LLCS system with good lubrication and anti-corrosion properties to improve its applicability.

EXPERIMENTS

Anionic surfactant dodecyl benzene sulfonic acid (DBSA) was used to construct non-aqueous LLCS in different solvents, including monoethanolamine (MEA) and diethanolamine (DEA). DBSA/H₂O LLCS system was constructed for comparison. The LLCS was characterized by polarizing microscope (POM), small-angle X-ray scattering (SAXS), and rheology. Its microstructure was discussed. Meanwhile, we evaluated the lubrication and anti-corrosion performance of LLCS. Its lubrication mechanism was explained through tribology tests and X-ray photoelectron spectrometer (XPS) analysis of the wear scar surface. Its anti-corrosion mechanism was investigated by using the weightlessness method, electrochemical test method, and quantum chemical theoretical calculations.

FINDINGS

The DBSA/MEA non-aqueous LLCS system showed better lubrication performance than DBSA/DEA and DBSA/H₂O LLCS. It can adsorb on the surface of the friction pair to form a lubrication friction film, which plays a better role in reducing friction and wear. The DBSA/MEA LLCS is less corrosive to metals because it can effectively isolate oxygen and water in the air between friction pairs. Furthermore, the lone pair electrons in the 2p orbital of the N atom in the MEA molecule could coordinate with the 3d empty orbital of the Fe atom, forming a protective film on the metal surface, which plays a good anti-corrosion effect. This work not only enriched the study of non-aqueous LLCS but also expanded its potential applications in the field of lubrication.

Rhamnolipid Self-Aggregation in Aqueous Media: A Long Journey toward the Definition of Structure–Property Relationships

The need to protect human and environmental health and avoid the widespread use of substances obtained from nonrenewable sources is steering research toward the discovery and development of new molecules characterized by high biocompatibility and biodegradability. Due to their very widespread use, a class of substances for which this need is particularly urgent is that of surfactants. In this respect, an attractive and promising alternative to commonly used synthetic surfactants is represented by so-called biosurfactants, amphiphiles naturally derived from microorganisms. One of the best-known families of biosurfactants is that of rhamnolipids, which are glycolipids with a headgroup formed by one or two rhamnose units. Great scientific and technological effort has been devoted to optimization of their production processes, as well as their physicochemical characterization. However, a conclusive structure–function relationship is far from being defined. In this review, we aim to move a step forward in this direction, by presenting a comprehensive and unified discussion of physicochemical properties of rhamnolipids as a function of solution conditions and rhamnolipid structure. We also discuss still unresolved issues that deserve further investigation in the future, to allow the replacement of conventional surfactants with rhamnolipids.

Design of functional nanoparticles by microfluidic platforms as advanced drug delivery systems for cancer therapy

Nanoparticle systems are functional carriers that can be used in the cancer therapy field for the delivery of a variety of hydrophobic and/or hydrophilic drugs. Recently, the advent of microfluidic platforms represents an advanced approach to the development of new nanoparticle-based drug delivery systems. Particularly, microfluidics can simplify the design of new nanoparticle-based systems with tunable physicochemical properties such as size, size distribution and morphology, ensuring high batch-to-batch reproducibility and consequently, an enhanced therapeutic effect in vitro and in vivo. In this perspective, we present accurate state-of-the-art microfluidic platforms focusing on the fabrication of polymer-based, lipid-based, lipid/polymer-based, inorganic-based and metal-based nanoparticles for biomedical applications.

Biodegradable and Biocompatible Silatrane Polymers

In this study, new biodegradable and biocompatible amphiphilic polymers were obtained by modifying the peripheral hydroxyl groups of branched polyethers and polyesters with organosilicon substituents. The structures of the synthesized polymers were confirmed by NMR and GPC. Organosilicon moieties of the polymers were formed by silatranes and trimethylsilyl blocks and displayed hydrophilic and hydrophobic properties, respectively. The effect of the ratio of hydrophilic to hydrophobic organosilicon structures on the surface activity and biological activity of macromolecules was studied, together with the effect on these activities of the macromolecules’ molecular weight and chemical structure. In particular, the critical micelle concentrations were determined, the effect of the structure of the polymers on their wetting with aqueous solutions on glass and parafilm was described, and the aggregation stability of emulsions was studied. Finally, the effect of the polymer structures on their antifungal activity and seed germination stimulation was examined.

Synthesis, characterization, and functional evaluation of branched dodecyl phenol polyoxyethylene ethers: a novel class of surfactants with excellent wetting properties

A series of branched dodecyl phenol polyoxyethylene ethers (b-DPEO_n) were successfully synthesized via alkylation and ethylene oxide addition reactions. The alkylation reaction was conducted by using a branched internal olefin as the raw material. Furthermore, the conversion rate of the branched dodecene was measured to be 98.1% and the selectivity towards branched dodecyl phenol (b-DP) was 95.9%. Moreover, b-DPEO_n (b-DPEO₇, b-DPEO₁₀, b-DPEO₁₂) were obtained via the reaction of ethylene oxide with b-DP. Notably, b-DPEO₁₀ can efficiently reduce the surface tension of water below 31.55 mN m⁻¹ at the critical micelle concentration (cmc) and the cmc value in water was approximately 1.3 × 10⁻² g L⁻¹ at 25 °C. The preferable wetting ability of b-DPEO₁₀ was superior to that of commercialized dodecyl phenol polyoxyethylene ether (c-DPEO_n), so it will be promoted and used in the textile and pesticide industries.

A series of branched dodecyl phenol polyoxyethylene ethers (b-DPEO_n) were successfully synthesized by using internal olefins with branches, in which branched structures promote good wetting ability.

Synthesis and pH-stimuli responsive research of gemini amine-oxide surfactants containing amides

The series of gemini amine-oxide surfactants with the formula C_nH_2n+1CONH(CH₂)₂N⁺O⁻(CH₃)–(CH₂)₃–(CH₃)N⁺O⁻(CH₂)₂NHCOC_nH_2n+1 (n = 11, 13, 15, and 17) has been synthesized successfully. Their isoelectric point and acid dissociation constant were measured to determine the ionization form of the surfactant molecules in aqueous solution within different pH values. The studies showed that the length of the hydrophobic alkyl chains had a great influence on the pH-stimuli responsive behavior of these surfactants. When n ≤ 13 (n-3-n-OA), the regularity of the pH-stimuli responsive behavior of the surfactant solutions was relatively consistent, while the surfactants with longer hydrophobic alkyl chain lengths lost this regularity (n ≥ 15). In addition, vesicles were observed in most of these surfactant aqueous solutions, with the exception of 11-3-11-OA. Moreover, the obvious flocculation phenomenon was observed within the range of pH 4–5, and they flocculated rapidly when they approached their isoelectric points. This process was reversible, which brought more possibilities for their application in drug delivery and release.

The series of gemini amine-oxide surfactants with the formula C_nH_2n+1CONH(CH₂)₂N⁺O^–(CH₃)–(CH₂)₃–(CH₃)N⁺O^– (CH₂)₂NHCOC_nH_2n+1 (n = 11, 13, 15, and 17) have been synthesized, and their pH-stimuli responsive behavior in aqueous solution has been studied.