Facile synthesis of macroporous zwitterionic hydrogels templated from graphene oxide-stabilized aqueous foams

Recent advances in nanomaterial-stabilized pickering foam: Mechanism, classification, properties, and applications

Pickering foam is a type of foam stabilized by solid particles known as Pickering stabilizers. These solid stabilizers adsorb at the liquid-gas interface, providing superior stability to the foam. Because of its high stability, controllability, versatility, and minimal environmental impact, nanomaterial-stabilized Pickering foam has opened up new possibilities and development prospects for foam applications. This review provides an overview of the current state of development of Pickering foam stabilized by a wide range of nanomaterials, including cellulose nanomaterials, chitin nanomaterials, silica nanoparticles, protein nanoparticles, clay mineral, carbon nanotubes, calcium carbonate nanoparticles, MXene, and graphene oxide nanosheets. Particularly, the preparation and surface modification methods of various nanoparticles, the fundamental properties of nanomaterial-stabilized Pickering foam, and the synergistic effects between nanoparticles and surfactants, functional polymers, and other additives are systematically introduced. In addition, the latest progress in the application of nanomaterial-stabilized Pickering foam in the oil industry, food industry, porous functional material, and foam flotation field is highlighted. Finally, the future prospects of nanomaterial-stabilized Pickering foam in different fields, along with directions for further research and development directions, are outlined.

New horizons on advanced nanoscale materials for Cultural Heritage conservation

Nanomaterials have permeated numerous scientific and technological fields, and have gained growing importance over the past decades also in the preservation of Cultural Heritage. After a critical overview of the main nanomaterials adopted in art preservation, we provide new insights into some highly relevant gels, which constitute valuable tools to selectively remove dirt or other unwanted layers from the surface of works of art. In particular, the recent "twin-chain" gels, obtained by phase separation of two different PVAs and freeze-thawing, were considered as the most performing gel systems for the cleaning of Cultural Heritage. Three factors are crucial in determining the final gel properties, i.e., pore size, pore connectivity, and surface roughness, which belong to the micro/nanodomain. The pore size is affected by the molecular weight of the phase-separating PVA polymer, while pore connectivity and tortuosity likely depend on interconnections formed during gelation. Tortuosity greatly impacts on cleaning capability, as the removal of matter at the gel-target interface increases with the uploaded fluid's residence time at the interface (higher tortuosity produces longer residence). The gels' surface roughness, adaptability and stickiness can also be controlled by modulating the porogen amount or adding different polymers to PVA. Finally, PVA can be partially replaced with different biopolymers yielding gels with enhanced sustainability and effective cleaning capability, where the selection of the biopolymer affects the gel porosity and effectiveness. These results shed new light on the effect of micro/nanoscale features on the cleaning performances of "twin-chain" and composite gels, opening new horizons for advanced and "green"/sustainable gel materials that can impact on fields even beyond art preservation, like drug-delivery, detergency, food industry, cosmetics and tissue engineering.

Porous superabsorbent composites prepared from aqueous foam template and application evaluation

Rapid water absorption is very important for the application of superabsorbent polymers under dry or semi-dry conditions, but there are currently few relevant studies. In this context, a novel porous superabsorbent of chitosan-grafted acrylic copolymer-2-acrylamido-2-methylpropanesulfonic acid/sapindus mukorossi pericarp/calcined oil shale semi-coke (CS-g-P(AA-co-AMPS)/SMP/COSSC) was prepared by a green and convenient foam template method, which was triggered by redox polymerization. The rich pore structure of the porous superabsorbent was conducive to accelerating the water absorption rate. It only took 15 min to reach a swelling capacity of 650 g g-1 in distilled water. Soil experiments show that even with the addition of 0.5 wt% porous superabsorbent, the soil water retention time can be extended to 7 days. Finally, it was applied to the growth of cabbage seeds and it was found that the growth was significantly improved. Based on these excellent properties, we expect to provide a valuable reference for the preparation of fast-absorbing materials through the green water-based foam template method, contributing to sustainable agriculture.

Sponge-like Cryogels from Liquid-Liquid Phase Separation: Structure, Porosity, and Diffusional Gel Properties

Macroporous gels find application in several scientific fields, ranging from art restoration to wastewater filtration or cell entrapment. In this work, two-component sponge-like cryogels are challenged to assess their cleaning performances and to investigate how pores size and connectivity affect physico-chemical properties. The gels were obtained through a freeze-thaw process, exploiting a spontaneous polymer-polymer phase-separation occurring in the pre-gel solution. During the freezing step, a highly hydrolyzed polyvinyl alcohol (H-PVA) forms the hydrogel walls. The secondary components, namely a partially hydrolyzed polyvinyl alcohol (L-PVA) or polyvinyl pyrrolidone (PVP), act as modular porogens, being partially extracted during gel washing. H-PVA/L-PVA and H-PVA/PVP mixtures were studied by confocal laser scanning microscopy to unveil sols and gels morphology at the micron-scale, while small angle X-ray scattering was used to get insights about characteristic dimensions at the nanoscale. The gelation mechanism was investigated through rheology measurements, and the characteristic exponents were compared to De Gennes' scaling laws gathered from percolation. In the field of art conservation, these sponge-like gels are ideal systems for the cleaning of artistic painted surfaces. Their interconnected pores allow the diffusion of cleaning fluids at the painted interface, facilitating dirt uptake and/or detachment. This study uncovered a direct relationship linking a gel's cleaning performance to its apparent tortuosity. These findings can pave the way to fine-tuning systems with enhanced cleaning abilities, not restricted to the restoration of irreplaceable priceless works of art, but with possible application in diverse research fields.

Fabrication of Macroporous Polymers via Water-in-Water Emulsion-Templating Technique

Emulsion-templated porous polymers have attracted broad attention due to their great application prospects in many fields. However, scaling up the emulsion-templated technique from the lab to industrial production remains a great challenge, especially for systems involving an oil-in-water (o/w) emulsion template that is used normally for preparing hydrophilic porous polymers. These systems require large amounts of organic solvents to be the internal phase (i.e., major phase) of the emulsion templates, which causes a significant environmental impact and cost. Herein, a water-in-water (w/w) emulsion-templated technique is presented to prepare porous hydrophilic polymers. The w/w emulsion is prepared by mixing a PEG aqueous solution and a dextran aqueous solution with cellulose nanocrystals (CNCs) as a stabilizer. With varying the mass ratio of dextran/PEG in the range of 1/2 to 8/1, a series of dextran-rich-phase-in-PEG-rich-phase (dextran/PEG) emulsions are obtained. Subsequently, monomers, such as acrylamide, acrylic acid, and/or 2-acrylamido-2-methylpropanesulfonic acid, are introduced to the emulsions to fabricate porous hydrophilic polymers. These polymers have an open-cell structure like those of o/w emulsion-templated polymers. The system developed herein is an environmentally friendly, low cost, and universal emulsion-templated method toward porous hydrophilic polymers, which avoids the defects caused by the presence of large amounts of organic solvents in an o/w emulsion-templating method and can be moved from the lab to industrial-scale production.

Electrically conductive porous MXene-polymer composites with ultralow percolation threshold via Pickering high internal phase emulsion templating strategy

HYPOTHESIS

Constructing a segregated network in electrically conductive polymer composites (ECPCs) is an effective method to lower the electrical percolation threshold. The segregated network structure can be formed naturally via polymerizing Pickering high internal phase emulsions (HIPEs) because solid particles are assembled at water-oil interfaces. However, most Pickering stabilizers show poor electrical conductivity. In this work, we propose a facile method to prepare lightweight ECPCs with well-controlled segregated structure via Ti₃C₂T_x-stabilized HIPE templating.

EXPERIMENTS

Hydrophilic Ti₃C₂T_x flakes are delicately hydrophobized with a double-chain cation surfactant. The morphology of Ti₃C₂T_x flakes is investigated by transmission electron microscopy (TEM) and atom force microscopy (AFM). The surface properties of modified Ti₃C₂T_x are characterized by zeta potential and water contact angle tests. The stability of Ti₃C₂T_x-stabilized emulsions, and the structure of prepared ECPCs are systematically investigated.

FINDINGS

Surface modified Ti₃C₂T_x flakes are used to stabilize water-in-oil (w/o) HIPEs for the first time. After the polymerization of continuous oil phase, ECPCs are successfully prepared with closed-cell porous structure. The pore size and size distribution of porous composites can be tailored by varying the content of Ti₃C₂T_x flakes. The Ti₃C₂T_x flakes are mainly immobilized at the water-oil interface and eventually form the segregated network in composites. Combining the unique segregated network and the outstanding metallic conductivity of Ti₃C₂T_x, the prepared porous polymer composites exhibit good conductivity even with ultralow Ti₃C₂T_x content of 0.016 vol%.

The construction of bio-inspired hierarchically porous graphene aerogel for efficiently organic pollutants absorption

Three-dimensional graphene aerogel shows a wide application in many frontier domains, which have attracted extensive research interest owing to its large specific surface area and high porosity. However, it is still a great challenge to construct the ideal hierarchical pore structure while guaranteeing excellent absorption and mechanical performance. In this paper, inspired by the bio-based porous material, a hierarchical graphene aerogel with inter-connected micro-/nano-scale pore structure was constructed. The micro and nano-scale pores are generated by the bubble and nanoparticles (NPs) template, respectively. The resulting graphene aerogel (GA) presents low density, increased interfacial areas, high mechanical performance, and excellent absorption performance towards a mass of organic solvents. In combination with its high compressibility, a diverse organic solvent can be absorbed efficiently and recycled by extrusion conveniently. Besides, owing to the scattered hydrophilic sites of functional groups and NPs on the surface of GA-b/NP, it shows high adhesion properties for water droplets, thus presents great potential in high-efficiency fog collecting materials. In a word, the proposed approach presents a novel strategy for the construction of the hierarchical aerogel with light-weight and elasticity, as well as the achievement of efficient functionalization, which has great potential for the preparation of diverse functional composites.

Adsorption and foaming properties of edible egg yolk peptide nanoparticles: Effect of particle aggregation

The adsorption and foaming properties of an edible colloidal nanoparticle (EYPNs), self-assembled from the food-derived, amphiphilic egg yolk peptides, were investigated, with the aim of evaluating their potential as efficient particulate stabilizers for development of aqueous food foams. The influence of particle aggregation induced by the changes of environmental conditions (mainly the pH) on these properties of EYPN systems was determined. Our results showed that the EYPNs are a highly pH-responsive system, showing the pH-dependent particle aggregation behavior, which is found to strongly affect the interfacial adsorption and macroscopic foaming behaviors of systems. Compared to high pH (6.0–9.0), the EYPNs at low pH (2.0–5.0) showed higher surface activity with a lower equilibrated surface tension as well as a higher packing density of particles and particle aggregates at the interface, probably due to the reduced electrostatic adsorption barrier. Accordingly, the EYPNs at these low pH values exhibited significantly higher foamability and foam stability. The presence of large particle clusters and/or aggregates formed at low pH in the continuous phase may contribute to the foam stability of EYPNs. These results indicate that our edible peptide-based nanoparticle EYPNs can be used as a new class of Pickering-type foam stabilizer for the design of food foams with controlled material properties, which may have sustainable applications in foods, cosmetics, and personal care products.

•

Edible nanoparticle EYPNs are efficient particulate stabilizers for making food foams.

•

EYPNs have a pH-dependent particle aggregation behavior in aqueous solutions.

•

The particle aggregation strongly affects the adsorption and foaming properties.

•

The presence of particle aggregates contributes to the foam stability of EYPNs.

•

The particle aggregates show higher surface activity and interfacial packing density.

Methyl-grafted silica nanoparticle stabilized water-in-oil Pickering emulsions with low-temperature stability

HYPOTHESIS

The viscosity of water-in-oil Pickering emulsions may dramatically increase upon cooling. The solvation of the long-chain alkyl groups grafted on the particles stabilizer is the likely cause of the strong dependence of rheological property on temperature. Thus, we hypothesize that silica nanoparticles (NPs) grafted with short-chain alkyl groups can stabilize Pickering emulsions, yielding weakly temperature-dependent rheological property.

EXPERIMENTS

Using alkyl-grafted (methyl, octyl, and octadecyl) silica NPs as emulsifiers, the rheological properties and microstructure of the water-in-oil Pickering, as well as the solvation of the silica NPs, were studied using diffusing-wave spectroscopy microrheology measurements, confocal laser scanning microscopy, and low-field nuclear magnetic resonance measurements.

FINDINGS

The use of methyl- and octadecyl-grafted silica NPs, which have almost identical optimum contact angles, to stabilize emulsions dramatically reduced the effect of cooling on the viscosity. Moreover, the emulsions stabilized by these methyl-grafted silica NPs exhibited nearly constant rheological properties as the temperature decreased from 75 to 5 °C. The nearly constant rheological properties are attributed to the nearly constant solvation in this temperature range. These materials have potential applications in the cosmetics and petroleum industries.

Eco-friendly floatable foam hydrogel for the adsorption of heavy metal ions and use of the generated waste for the catalytic reduction of organic dyes

Benefiting from their three-dimensional network structure and various functional groups, hydrogels have emerged as efficient adsorbents for the removal of heavy metal ions from wastewater. However, the obvious drawbacks of hydrogels such as generation of toxic secondary waste after adsorption and difficulty in their separation and collection limit their practical application in wastewater treatment. Herein, we introduced a facile strategy of combining mechanical frothing and in situ radical polymerization to prepare a floatable porous foam hydrogel, which not only efficiently removed Cu2+ from water, but also could be easily collected. After adsorption, to avoid the generation of secondary toxic waste, a sustainable strategy of turning the waste into useful materials was introduced. The waste of the Cu2+_ adsorbed hydrogel was processed using NaBH4 solution to obtain a Cu nanoparticle (Cu NP)-loaded composite hydrogel, which was further employed as a catalyst for the catalytic reduction of organic dyes. Thus, this work established a convenient and sustainable strategy for the preparation of an eco-friendly floatable foam hydrogel for the efficient removal of heavy metal ions such as Cu2+ from water and turning the generated waste into useful materials, which is a concept envisaged to be applicable to other heavy metal ion-adsorbed hydrogel systems and will efficiently avoid unwanted secondary pollution.