Surface-defect-rich mesoporous NH2-MIL-125 (Ti)@Bi2MoO6 core-shell heterojunction with improved charge separation and enhanced visible-light-driven photocatalytic performance

Recent advances in application of metal-organic frameworks (MOFs) as adsorbent and catalyst in removal of persistent organic pollutants (POPs)

The presence of persistent organic pollutants (POPs) in the aquatic environment is causing widespread concern due to their bioaccumulation, toxicity, and possible environmental risk. These contaminants are produced daily in large quantities and released into water bodies. Traditional wastewater treatment plants are ineffective at degrading these pollutants. As a result, the development of long-term and effective POP removal techniques is critical. In water, adsorption removal and photocatalytic degradation of POPs have been identified as energy and cost-efficient solutions. Both technologies have received a lot of attention for their efforts to treat the world's wastewater. Photocatalytic removal of POPs is a promising, effective, and long-lasting method, while adsorption removal of persistent POPs represents a simple, practical method, particularly in decentralized systems and isolated areas. It is critical to develop new adsorbents/photocatalysts with the desired structure, tunable chemistry, and maximum adsorption sites for highly efficient removal of POPs. As a class of recently created multifunctional porous materials, Metal-organic frameworks (MOFs) offer tremendous prospects in adsorptive removal and photocatalytic degradation of POPs for water remediation. This review defines POPs and discusses current research on adsorptive and photocatalytic POP removal using emerging MOFs for each type of POPs.

Anisotropic phenanthroline-based ruthenium polymers grafted on a titanium metal-organic framework for efficient photocatalytic hydrogen evolution

Conjugated polymers and titanium-based metal-organic framework (Ti-MOF) photocatalysts have demonstrated promising features for visible-light-driven hydrogen production. We report herein a strategy of anisotropic phenanthroline-based ruthenium polymers (PPDARs) over Ti-MOF, a tunable platform for efficient visible-light-driven photocatalytic hydrogen evolution reaction (HER). Several analytical methods including X-ray absorption spectroscopy (XAS) revealed the judicious integration of the surface-active polymer over the Ti-MOF reinforcing the catalytic activity over the broad chemical space. PPDAR-4 polyacrylate achitecture led to a substantial increase in the H₂ evolution rate of 2438 µmolg^-1h^-1 (AQY: 5.33%) compared to pristine Ti-MOF (238 µmol g^-1 h^-1). The separation of photogenerated charge carriers at the PPDAR-4/Ti-MOF interface was confirmed by the optical and electrochemical investigations. The experimental, as well as theoretical data, revealed their physical and chemical properties which are positively correlated with the H₂ generation rate. This offers a new avenue in creating polymer-based MOF robust photocatalysts for sustainable energy.

Nanoengineered metal-organic framework for adsorptive and photocatalytic mitigation of pharmaceuticals and pesticide from wastewater

Rapidly expanding water pollution has transformed into significant dangers around the world. In recent years, the pharmaceutical and agriculture field attained enormous progress to meet the necessities of health and life; however, discharge of trace amounts of pharmaceuticals and pesticides into water significantly have a negative influence on human health and the environment. Contamination with these pollutants also constitutes a great threat to the aquatic ecosystem. To deal with the harmful impacts of such pollutants, their expulsion has attracted researchers' interest a lot, and it became essential to figure out techniques suitable for the removal of these pollutants. Thus, many researchers have devoted their efforts to improving the existing technology or providing an alternative strategy to solve this environmental problem. One of the attractive materials for this purpose is metal-organic frameworks (MOFs) due to their superior high surface area, high porosity, and the tunable features of their structures and function. Among various techniques of wastewater treatment, such as biological treatment, advanced oxidation process and membrane technologies, etc., metal-organic frameworks (MOFs) materials are tailorable porous architectures and are viably used as adsorbents or photocatalysts for wastewater treatment due to their porosity, tunable internal structure, and large surface area. MOFs are synthesized by various methods such as solvo/hydrothermal, sonochemical, microwave and mechanochemical methods. Most common method used for the synthesis of MOFs is solvothermal/hydrothermal methods. Herein, this review aims at providing a comprehensive overview of the latest advances in MOFs and their derivatives, focusing on the following aspects: synthesis and applications. This review comprehensively highlights the application of MOFs and nano-MOFs to remove pharmaceuticals and pesticides from wastewater. For the past years, transition metal-based MOFs have been concentrated as photocatalyst/adsorbents in treating contaminated water. However, work on main group metal-based MOFs is not so abundant. Hence, the foremost objective of this review is to present the latest material and references concerning main group element-based MOFs and nanoscale materials derived from them towards wastewater treatment. It summarizes the possible research challenges and directions for MOFs and their derivatives as catalysts applied to wastewater treatment in the future. With the context of recent pioneering studies on main group elements-based MOFs and their derivatives; we hope to stimulate some possibilities for further development, challenges and future perspectives in this field have been highlighted.

Solvent-controlled synthesis of Ti-based porphyrinic metal–organic frameworks for the selective photocatalytic oxidation of amines

The photocatalytic activity of metal-organic frameworks (MOFs) can be managed by the milieu of synthesis. Herein, N,N'-dimethylacetamide (DMA) and N,N'-diethylformamide (DEF) were employed as solvents for the synthesis of two Ti-based porphyrinic MOFs, namely Ti-PMOF-DMA and Ti-PMOF-DEF, from tetrabutyl orthotitanate and 4,4',4'',4'''-(porphine-5,10,15,20-tetrayl)tetrakis(benzoic acid). Notably, both DMA and DEF were adsorbed onto the Ti-oxo clusters of the two MOFs to shape their properties. Ti-PMOF-DMA was observed with better optoelectronic response and charge transfer than Ti-PMOF-DEF. Moreover, Ti-PMOF-DMA owned a larger pore volume than Ti-PMOF-DEF, imparting more accessible sites to benzyl amines. Ti-PMOF-DMA exhibited better activity in selective photocatalytic aerobic oxidation of benzylamine than Ti-PMOF-DEF. Irradiated by red light-emitting diodes, outstanding results for selective conversion of  benzyl amines to imines over Ti-PMOF-DMA were attained. Superoxide radical anion, generated by the electron transfer from porphyrin via Ti-oxo clusters to dioxygen, turned out to be the primary reactive oxygen species. There was generality towards aerobic oxidation of amines to imines and considerable stability for Ti-PMOF-DMA. This work provides a new perspective on the altering MOFs to enhance photocatalytic organic transformations.

Reduced graphene oxide modified Z-scheme AgI/Bi2MoO6 heterojunctions with boosted photocatalytic activity for water treatment originated from the efficient charge pairs partition and migration

In order to enhance degradation of harmful organic pollutants like Rhodamine B (RhB) dye under visible-light irradiation (λ >420 nm), a silver iodide/reduced graphene oxide/bismuth molybdate (AgI/rGO/Bi2MoO6) Z-scheme heterojunction photocatalyst was synthesized by a solvothermal process combined with an in-situ precipitation technique. The AgI (15 wt.%)/rGO/Bi2MoO6 (AGBMO-15) photocatalyst with a dosage of 0.5 g/L exhibited the highest photocatalytic activity with 98.0% RhB removal under an initial concentration of 10 mg/L within 30 min. This removal rate was approximately 65.8%, 57.7%, and 72.7% higher than that for a rGO/Bi2MoO6 (GBMO) binary composite, pure AgI powder, and pristine Bi2MoO6 nanoplates, respectively. The novel photocatalyst achieved approximately three times higher photocatalytic degradation within a shorter period of visible-light irradiation than pure Bi2MoO6. Through photoluminescence analysis and trapping experiments, this outstanding performance was attributed to the efficient separation of photogenerated electron-hole pairs owing to an internal electric field at the contact interface of AgI and Bi2MoO6, which generated more superoxide radical anions (•O2-) as primary reactive species to promote RhB degradation. Meanwhile, the rGO participated in the capture of visible-light and played a role of solid electronic medium at the AgI/Bi2MoO6 interface, which realized an effective Z-scheme electron transfer path, avoided the self oxidation of photocatalyst and prolonged the carrier life. Furthermore, the AGBMO-15 photocatalyst exhibited excellent photocatalytic degradation stability, maintaining an RhB removal rate of 96.2% after four cycles of reuse. Due to its simplicity, reusability, and controllability, the proposed photocatalyst has excellent application potential for the environmental remediation of wastewater.

Dual modulation steering electron reducibility and transfer of bismuth molybdate nanoparticle to boost carbon dioxide photoreduction to carbon monoxide

Owing to the exorbitant CO₂ activation energy and unsatisfactory photogenerated charge separation efficiency, CO₂ photoconversion still faces enormous challenges. In this study, a directional electron transfer channel has been established by decorating N-doped carbon quantum dots (N-CQDs) on the surface of Bi₄MoO₉ nanoparticles to ensure that more active electrons can participate in the CO₂ reduction. The conduction band of Bi₄MoO₉ nanoparticles is calculated to be -1.55 eV versus the normal hydrogen electrode (NHE), pH = 7, which is negative enough to attain the photocatalytic CO₂ reduction potential of -0.53 eV versus NHE, pH = 7. CO₂ adsorption curves and in situ Fourier transform infrared spectra reveal that N-CQDs facilitate surface CO₂ adsorption and activation, as well as CO desorption. In addition, steady-state photoluminescence and photoelectrochemical tests prove that the charge separation efficiency can be greatly enhanced by constructing N-CQDs/Bi₄MoO₉ composites. In the presence of pure water, N-CQDs/Bi₄MoO₉-2 composite achieved a CO yield of 16.22 μmol g^-1 after 5 h Xe light illumination, which was 3.24 times higher than that of pure Bi₄MoO₉ (4.98 μmol g^-1). This study offers a distinctive approach to the optimization of Bi₄MoO₉ photocatalysts and their application in energy conversion.

Fabricating a wettable microwells array onto a nitrogen plasma-treated ITO substrate: high-throughput fluorimetric platform for selective sensing of ammonia in blood using polymer-stabilized NH2-MIL-125

A high-throughput and selective fluorimetric platform has been constructed for the analysis of ammonia in blood by using a polymer-stabilized metal-organic framework (MOF) of porous NH2-MIL-125, which was coated onto a wettable microwells array constructed on an indium tin oxide (ITO) substrate. It was found that the nitrogen plasma treatment for the ITO substrate could create a super-hydrophilic interface that combined with the hydrophobic pattern yielded a wettable microwells array, enabling the condensation-based enrichment of targets from the sample droplets. Moreover, the NH2-MIL-125 MOF encapsulated using polymers could be firmly coated onto the microwells to act as fluorescent probes for sensing NH3 with enhanced responses. In addition, the use of the polymer polyvinyl pyrrolidone could protect and stabilize the crystals of NH2-MIL-125 probe in aqueous media, revealing the improved hydrophilicity and significantly depressed signal background. The as-developed fluorimetric platform, containing a MOF-coated microwells array, can enable the detection of ammonia in blood, with concentrations ranging linearly from 0.10 to 300 μM. More importantly, this plasma treatment-based fabrication route may hold promise for designing different wettable microwells arrays for the high-throughput detection of multiple targets in the fields of biomedical analysis and environmental monitoring.

A Critical Review on Metal-Organic Frameworks and Their Composites as Advanced Materials for Adsorption and Photocatalytic Degradation of Emerging Organic Pollutants from Wastewater

Water-borne emerging pollutants are among the greatest concern of our modern society. Many of these pollutants are categorized as endocrine disruptors due to their environmental toxicities. They are harmful to humans, aquatic animals, and plants, to the larger extent, destroying the ecosystem. Thus, effective environmental remediations of these pollutants became necessary. Among the various remediation techniques, adsorption and photocatalytic degradation have been single out as the most promising. This review is devoted to the compilations and analysis of the role of metal-organic frameworks (MOFs) and their composites as potential materials for such applications. Emerging organic pollutants, like dyes, herbicides, pesticides, pharmaceutical products, phenols, polycyclic aromatic hydrocarbons, and perfluorinated alkyl substances, have been extensively studied. Important parameters that affect these processes, such as surface area, bandgap, percentage removal, equilibrium time, adsorption capacity, and recyclability, are documented. Finally, we paint the current scenario and challenges that need to be addressed for MOFs and their composites to be exploited for commercial applications.