Facile design of ultrafine Co7Fe3 nanoparticles coupled with nitrogen-doped porous carbon nanosheets for non-enzymatic glucose detection

Bimetallic metal-organic framework-derived bamboo-like N-doped carbon nanotube-encapsulated Ni-doped MoC nanoparticles for water oxidation

Molybdenum carbide materials with unique electronic structures have received special attention as water-splitting catalysts, but their structural stability in the alkaline water electrolysis process is not satisfactory. This study reports an in situ pyrolysis method for preparing NiMo-based metal-organic framework (MOF)-derived chain-mail oxygen evolution reaction (OER) electrocatalysts and bamboo-like N-doped carbon nanotube (NCNT)-encapsulated Ni-doped MoC nanoparticles (NiMoC-NCNTs). The NCNTs can provide chain mail shells to protect the inner highly reactive Ni-doped MoC cores from electrochemical corrosion by the alkaline electrolyte and regulate their catalytic properties through charge redistribution. Benefiting from high N-doping with abundant pyridinic moieties and abundant active sites of the periodic bamboo-like nodes, the as-prepared NiMoC-NCNTs display an outstanding activity for the OER with an overpotential of 310 mV at 10 mA cm-2 and a superior long-term stability of 50 h. Density functional theory calculations reveal that the excellent electrocatalytic activity of NiMoC-NCNTs comes from the electron transfer from NiMoC nanoparticles to NCNTs, resulting in a decrease in the local work function at the carbon surface and optimized free efficiencies of OER intermediates on C sites. This work provides an effective approach to improve the structural stability of fragile catalysts by equipping them with carbon-based chain.

Facile synthesis of ultrafine iron-cobalt (FeCo) nanocrystallite-embedded boron/nitrogen-codoped porous carbon nanosheets: Accelerated water splitting catalysts

Designing two-dimensional (2D) porous carbon nanosheets is expected to boost the water splitting efficiency of low-cost iron (Fe) and cobalt (Co)-based catalysts. Nevertheless, the aggregations, tedious preparation procedures, and expensive precursors for synthesizing 2D porous carbon nanosheets have hindered their widespread application. Herein, for the first time, we developed a low-cost method for large-scale and rapid synthesis of the three-dimensional (3D) hierarchically porous architectures self-assembled by the ultrafine FeCo nanoparticles embedded and boron/nitrogen-codoped 2D porous carbon nanosheets (denoted as FeCo@BNPCNS). The optimal FeCo@BNPCNS-900 exhibited abundant porous channels, a large surface area, and vast carbon edges/defects. Therefore, 8.10 at% electrochemically active boron (B)/nitrogen (N) centers were doped into the porous carbon nanosheets. In an alkaline solution, the optimal FeCo@BNPCNS-900 nanosheets revealed excellent hydrogen evolution reaction (HER) electrocatalytic activity, surpassing commercial 20 wt% Pt/C. For instance, the HER potential at 10 mA cm-2 [-50.6 mV vs. reversible hydrogen electrode (RHE)] of FeCo@BNPCNS-900 was even 19.3 mV more positive than that of commercial 20 wt% Pt/C (-69.9 mV vs. RHE). Meanwhile, its oxygen evolution reaction (OER) catalytic activity was just a little worse than ruthenium oxide (RuO2). The water electrolysis cell of FeCo@BNPCNS-900 nanosheets just required a small voltage of 1.589 V for full water splitting to achieve 10 mA cm-2, even 70.3 mV more negative than that of the state-of-the-art 20 wt% Pt/C||RuO2 benchmark (1.660 V) with outstanding stability. The perfect 3D hierarchically porous and honeycomb-like architecture, abundant porous channels/mesopores, and uniformly dispersed electrocatalytically active sites on FeCo@BNPCNS-900 nanosheets were responsible for the outstanding water splitting performance. Finally, this study provides an efficient strategy for the large-scale, rapid, and low-cost synthesis of 2D porous carbon nanosheets without using any template, surfactant, or expensive precursors.

An electrochemically fabricated cobalt iron oxyhydroxide bifunctional electrode for an anion exchange membrane water electrolyzer

For an anion exchange membrane water electrolyzer (AEMWE), exploring bifunctional electrodes with low cost and high efficiency is a crucial task for future renewable energy systems. Herein, we report a simple method to fabricate cobalt iron oxyhydroxide (Co_zFe_1-zO_xH_y) bifunctional electrodes for AEMWEs. The bifunctional electrodes were prepared via one-pot electrodeposition on Ti paper (TP). By adjusting the electrodeposition conditions, the morphology and composition of Co_zFe_1-zO_xH_y/TP could be controlled. The Co₆₅Fe₃₅O_xH_y/TP electrode demonstrated the highest activity for overall water electrolysis owing to the maximized synergy effect between Co and Fe. The bifunctional activities of Co₆₅Fe₃₅O_xH_y/TP were well retained at -50 and 50 mA cm^-2 for 12 h. Co₆₅Fe₃₅O_xH_y/TP, which shows the highest bifunctional activity, was employed in an AEMWE single cell as the anode and cathode. The AEMWE single cell employing Co₆₅Fe₃₅O_xH_y/TP showed a current density of 0.605 A cm^-2 at a cell voltage of 2.0 V_cell. The calculated energy efficiency of the single cell is 55.7% at 2.0 A cm^-2, which is comparable with those of the state-of-the-art AEMWE single cells with bifunctional electrodes. Furthermore, the cell voltage of the single cell with Co₆₅Fe₃₅O_xH_y/TP showed negligible degradation for 50 h at 0.6 A cm^-2.

Hollow CoFe-based hybrid composites derived from unique S-modulated coordinated transition bimetal complexes for efficient oxygen evolution from water splitting under alkaline conditions

The oxygen evolution reaction (OER) is an important reaction in water splitting. However, the high cost and slow-rate catalysts hinder commercial applications. Although an important process for manufacturing of hollow structures, it is difficult to construct complicated hollow structures with an excellent and regulable shape for multi-component materials. In this study, we demonstrate that sulfur-Co,Fe bimetallic nitrogen carbon hollow composite hybrids (x-S-CoFe@NC) can be synthesized by regulating the amount of sulfur and using the hydrothermal method. For OER, 32-S-CoFe@NC exhibits excellent electrocatalytic activity with a low overpotential of 232 mV, which is higher than those of 0-S-CoFe@NC (270 mV), 23-S-CoFe@NC (247 mV), and RuO₂ (243 mV) catalysts at 10 mA cm^-2. In addition, with air as the cathode, a rechargeable Zn-air battery with outstanding long-life cycling stability for 80 hours based on 32-CoFe@NC + Pt/C is proposed. The advanced technique described here supplies a new route for preparing hollow transition bimetal carbon hybrids with an adjustable composite arrangement for electrocatalysis and water splitting.

Porous Carbon Substrate Improving the Sensing Performance of Copper Nanoparticles Toward Glucose

An accurate sensor to rapidly determine the glucose concentration is of significant importance for the human body health, as diabetes has become a very high incidence around the world. In this work, copper nanoparticles accommodated in porous carbon substrates (Cu NP@PC), synthesized by calcinating the filter papers impregnated with copper ions at high temperature, were designed as the electrode active materials for electrochemical sensing of glucose. During the formation of porous carbon, the copper nanoparticles spontaneously accommodated into the formed voids and constituted the half-covered composites. For the electrochemical glucose oxidation, the prepared Cu NP@PC composites exhibit much superior catalytic activity with the current density of 0.31 mA/cm2 at the potential of 0.55 V in the presence of 0.2 mM glucose. Based on the high electrochemical oxidation activity, the present Cu NP@PC composites also exhibit a superior glucose sensing performance. The sensitivity is determined to be 84.5 μA /(mmol.L) with a linear range of 0.01 ~ 1.1 mM and a low detection limit (LOD) of 2.1 μmol/L. Compared to that of non-porous carbon supported copper nanoparticles (Cu NP/C), this can be reasonable by the improved mass transfer and strengthened synergistic effect between copper nanoparticles and porous carbon substrates.

Switching the solubility of electroactive ionic liquids for designing high energy supercapacitor and low potential biosensor

Ionic liquids are regarded as one of the most prodigious materials for sustainable technological developments with superior performance and versatility. Hence, in this study, we have reported the design and synthesis of electroactive disubstituted ferrocenyl ionic liquids (Fc-ILs) with two different counter anions and demonstrated the significance of their anion tuneable physicochemical characteristics towards multifunctional electrochemical applications. The Fc-IL synthesized with chloride counter anion (Fc-Cl-IL) displays water-solubility and can be used as a redox additive in the fabrication of supercapacitor. Supercapacitor device with Fc-Cl-IL based redox electrolyte exhibits outstanding energy and power densities of 91 Wh kg^-1 and 20.3 kW kg^-1, respectively. Meanwhile, ferrocenyl IL synthesized with perchlorate anion (Fc-ClO₄-IL) exhibits water-insolubility and can serve as a redox mediator towards construction of a glucose biosensor. The biosensor comprising Fc-ClO₄-IL is able to detect glucose at an exceptionally lower potential of 0.2 V, with remarkable sensitivity and selectivity. This study implies that the introduction of electroactive ILs could afford supercapacitor devices with high energy and power densities and biosensors with less detection potential.

Co0.7Fe0.3 NPs confined in yolk-shell N-doped carbon: engineering multi-beaded fibers as an efficient bifunctional electrocatalyst for Zn-air batteries

The development of bifunctional catalysts with a delicate structure, high efficiency, and good durability for the oxygen evolution reaction (ORR) and oxygen evolution reaction (OER) is crucial to renewable Zn-air batteries. In this work, Co_0.7Fe_0.3 alloy nanoparticles (NPs) confined in N-doped carbon with a yolk-shell structure in multi-beaded fibers were prepared as a bifunctional electrocatalyst. The confinement structure was composed of an N-doped graphitized carbon shell and a core formed by numerous Co_0.7Fe_0.3 NPs, and was evenly threaded into a one-dimensional fiber. Moreover, this distinctive hierarchical structure featured abundant mesopores, a high BET surface area of 743.8 m² g^-1, good electronic conductivity, and uniformly distributed Co_0.7Fe_0.3/Co(Fe)-N_x coupling active sites. Therefore, the experimentally optimized Co_0.7Fe_0.3@NC_2:1-800 showed excellent OER performance (overpotential reached 314 mV at 10 mA cm^-2) that far exceeded RuO₂ (353 mV), and good ORR catalytic performance (half-wave potential of 0.827 V) comparable to Pt/C (0.818 V). Impressively, the Co_0.7Fe_0.3@NC_2:1-800 Zn-air battery delivered a higher open circuit voltage of 1.449 V, large power density of 85.7 mW cm^-2, and outstanding charge-discharge cycling stability compared with the commercial RuO₂ + 20 wt% Pt/C catalyst. This work provides new ideas for the structural design of electrocatalysts and energy conversion systems.

N,N-dicarboxymethyl Perylene-diimide modified CeCoO3: Enhanced peroxidase activity, synergetic catalytic mechanism and glutathione colorimetric sensing

N,N-dicarboxymethyl Perylene-diimide (PDI) modified CeCoO₃ nanocomposites were prepared by a two-step method. After modification with PDI molecules, the obtained PDI-CeCoO₃ nanocomposites were demonstrated to possess the heightened peroxidase-like activity, compared with that of pure CeCoO₃ nanoparticles. In the presence of H₂O₂, the heightened peroxidase-like behaviors of PDI-CeCoO₃ were evaluated by the oxidation of the colorless substrate 3,3,5,5-tetramethylbenzidine (TMB) into blue oxTMB, which was detected visually only in 4 min. Importantly, a systematic study of catalytic activity of PDI-CeCoO₃ by different means, including fluorescent probe, electrochemical data, diffuse reflection spectra together with free radical scavenger is executed, verifying that the catalytic activity were from O₂^- and electron holes (h⁺). And, the transfer of photogenerated carriers in the PDI-CeCoO₃ was the Z-scheme heterojuntion mechanism. Furthermore, the peroxidase-like activity of PDI-CeCoO₃ was significantly inhibited by Glutathione (GSH), resulting in fading of blue oxTMB. Based on this, a colorimetric assay for GSH biosensing has been developed. And, the liner range for GSH detection is from 1 to 10 μM with a detection limit of 0.658 μM. The recovery of GSH with different concentrations from 90.0% to 105.9% and the relative standard deviation (RSD) from 1.9% to 5.1%. This colorimetric sensor can be used to detect GSH in real samples.

Facile preparation of Ni nanoparticle embedded on mesoporous carbon nanorods for non-enzymatic glucose detection

Transition metal doped carbon materials are recognized as promising sensing platforms for glucose detection. Herein, a simple strategy involving crystallinity, nanostructure engineering, and pyrolysis was developed for constructing well-defined Ni nanoparticle embedded on nanoporous carbon nanorods (Ni/NCNs). A three-dimensional nickel-based metal-organic framework (Ni-MOF) was used as both a self-sacrificing template and precursor. Due to the synergistic effects between the uniformly dispersed Ni nanoparticles and the nanoporous carbon matrix, the as-prepared Ni/NCNs exhibited remarkable electrochemical activity. The fabricated Ni/NCNs glucose sensor showed excellent electrocatalytic performance with ultra-low limit of detection, wide linear detection ranges, fast response times (within 1.6 s), superior stability, and anti-interference characteristics. Moreover, the Ni/NCNs sensing platform was successfully applied to analyze glucose concentrations in human blood samples. These results showed that Ni/NCNs hold potential applications in developing enzyme-free glucose sensors.

An enzyme-free electrochemical biosensor based on target-catalytic hairpin assembly and Pd@UiO-66 for the ultrasensitive detection of microRNA-21

MicroRNA-21 (miR-21) has been widely investigated as important biomarkers for cancer diagnosis and treatment. Herein, a highly sensitive nonenzymatic electrochemical biosensor based on Pd@metal-organic frameworks (Pd@UiO-66) and target-catalytic hairpin assembly (CHA) with target recycling approach has been proposed for the detection of miR-21. The proposed biosensor integrates the efficient CHA strategy and excellent electrocatalytic performance of Pd@UiO-66 nanocomposites. The concentration of miRNA-21 is related to the amount of the adsorbed electrocatalyst, leading to the different electrochemical signals for readout towards paracetamol (AP). This biosensor shows a low limit of detection of 0.713 fM with the dynamic range of 20 fM -600 pM under the optimal experimental conditions, providing a powerful platform for detecting miR-21. Furthermore, the designed biochemical self-assembly strategy of this electrochemical biosensor is promising candidate for potential applications in the analysis of other important genetic biomarkers for early diagnosis of cancers.

A novel cobalt and nitrogen co-doped mesoporous hollow carbon hemisphere as high-efficient electrocatalysts for oxygen reduction reaction

Exploring a cheap catalyst with effective activity for oxygen reduction reaction (ORR) to replace precious metal electrocatalysts has gained tremendous attention for several decades. In this study, we designed and synthesized cobalt and nitrogen supported on mesoporous hollow carbon hemisphere (Co/N/HCHs) nanocomposites by a facile and economical approach. Semisphere-shaped mesoporous hollow carbon is self-generated using silica particles as template, followed by a pyrolysis-etching process; and exhibits high electrical conductivity and high specific surface. The unique porous structure of carbon provides significant number of the abundant defective sites and shortens the mass transfer pathway, leading to a greatly enhanced electrocatalytic activity with mainly 4e^- reduction. Moreover, the synergistic effects of large electrochemically active areas and good electrical conductivity, resulting from the introduction of Co and N heteroatom, are the main reason for displaying outstanding ORR activity with a high half-wave potential of 0.8 V and the electron transfer numbers of 3.89. Furthermore, an excellent long-term stability (the current density retention of 87.0%) and superb methanol tolerance in alkaline medium are achieved. Undoubtedly, this demonstrates a potential way to strategically design the non-precious metal doped carbon catalysts for wider practical applications.

Electrochemical non-enzymatic glucose sensors: recent progress and perspectives

This review summarizes recent advances in the development of electrocatalysts for non-enzymatic glucose detection. The sensing mechanism and influencing factors are discussed, and the perspectives and challenges are also addressed.

Universal laser-assisted growth of transition metal nanoparticles on a flexible graphene electrode for a nonenzymatic glucose sensor

A universal laser-assisted method was used for the construction of transition metal nanoparticles on graphene as a glucose sensor.

Facile preparation of CoMoO4 nanorods at macroporous carbon hybrid electrocatalyst for non-enzymatic glucose detection

Glucose is a popular biosensor target due to its closely with diabetes or hypoglycemia in blood. Designing efficiency electrocatalysts for the determination of glucose is vital to develop glucose detection devices. CoMoO₄, as a kind of bimetallic oxide material, exhibits unique electrochemical properties. 3D macroporous carbon (MPC) has large specific surface area and excellent electrical conductivity, providing an effective support for loading other nano-entities to form novel composite with good synergetic effects. Herein, nanorod-like CoMoO₄ anchored onto MPC support was synthesized for the development of a promising electrochemical sensing platform for glucose. Attributing to the synergic effects between the good electrocatalytic performance of CoMoO₄ nanorods and the extraordinary electrical conductivity of 3D layered MPC, the novel CoMoO₄/MPC composites non-enzymatic sensor shows excellent electrocatalytic performance for oxidation of glucose. Under the optimum conditions, the proposed CoMoO₄/MPC hybrids provided a reliable linear range of 5 × 10^-7 to 1.08 × 10^-4 M with a low limit of detection (0.13 μM) for the detection of glucose. Meanwhile, the CoMoO₄/MPC sensing platform shows fast response time of 1.76 s, good stability and selectivity for detecting glucose. Moreover, this non-enzymatic sensor also has been successfully applied to measure glucose level in human blood samples. Therefore, the developed sensor holds a new promise for the construction of facile and sensitive non-enzymatic glucose analytical platform.