Highly porous self-assembly of nitrogen-doped graphene quantum dots over reduced graphene sheets for photo-electrocatalytic electrode

Probing the Closed Association of Oligoquinoline Foldamers by Time-Resolved Fluorescence Anisotropy

The metal-mediated dimerization of oligoquinoline foldamers terminated at one end with an oligo(phenylenevinylene) and at the other with a carboxylic acid (OPV-QnA, where n = 4, 8, 17, and 33), and the complexation of OPV-Q8A and Q16A was promoted in chloroform by the addition of a concentrated 16 M aqueous sodium hydroxide solution. UV-vis absorption and time-resolved fluorescence anisotropy (TRFA) experiments were conducted to determine, respectively, the concentration and the average rotational time ⟨ϕ⟩ of the mixture of unassociated and associated foldamers across a range of foldamer concentrations spanning 5 orders of magnitude. Plots of ⟨ϕ⟩ as a function of acid group concentration revealed that ⟨ϕ⟩ increased with increasing foldamer concentration only when the foldamer solution in chloroform was vigorously mixed with the 16 M sodium hydroxide aqueous solution. Furthermore, all plots showed that ⟨ϕ⟩ reached a plateau at high foldamer concentration. The increase in ⟨ϕ⟩ reflected the association of foldamers into larger objects through metal ion coordination with the carboxylate anions generated by deprotonation of the carboxylic acid of OPV-QnA with NaOH, while the plateau obtained at high foldamer concentration indicated that these interactions led to the dimerization of the foldamers via a closed association mechanism. Analysis of the ⟨ϕ⟩ trends yielded the equilibrium constants (K) describing the foldamer dimerization, whose value equaled 1.0 (±0.2) × 106 M-1 for the three longer OPV-QnA foldamers, but was about 10 times smaller for the shortest one (n = 4). Association of OPV-Q8A and Q16A yielded a complex with a ⟨ϕ⟩ matching that of OPV-Q24A, and K for this complexation was similar to that for dimerization. These experiments illustrate the robust nature of TRFA as an experimental method to probe the size of rigid, self-assembled foldamers in solution.

Application of nanoparticles in breast cancer treatment: a systematic review

It is estimated that cancer is the second leading cause of death worldwide. The primary or secondary cause of cancer-related mortality for women is breast cancer. The main treatment method for different types of cancer is chemotherapy with drugs. Because of less water solubility of chemotherapy drugs or their inability to pass through membranes, their body absorbs them inadequately, which lowers the treatment's effectiveness. Drug specificity and pharmacokinetics can be changed by nanotechnology using nanoparticles. Instead, targeted drug delivery allows medications to be delivered to the targeted sites. In this review, we focused on nanoparticles as carriers in targeted drug delivery, their characteristics, structure, and the previous studies related to breast cancer. It was shown that nanoparticles could reduce the negative effects of chemotherapy drugs while increasing their effectiveness. Lipid-based nanocarriers demonstrated notable results in this instance, and some products that are undergoing various stages of clinical trials are among the examples. Nanoparticles based on metal or polymers demonstrated a comparable level of efficacy. With the number of cancer cases rising globally, many researchers are now looking into novel treatment approaches, particularly the use of nanotechnology and nanoparticles in the treatment of cancer. In order to help clinicians, this article aimed to gather more information about various areas of nanoparticle application in breast cancer therapy, such as modifying their synthesis and physicochemical characterization. It also sought to gain a deeper understanding of the mechanisms underlying the interactions between nanoparticles and biologically normal or infected tissues.

Green synthesis of iron-doped graphene quantum dots: an efficient nanozyme for glucose sensing

Single-atom nanozymes with well-defined atomic structures and electronic coordination environments can effectively mimic the functions of natural enzymes. However, the costly and intricate preparation processes have hindered further exploration and application of these single-atom nanozymes. In this study, we presented a synthesis technique for creating Fe-N central single-atom doped graphene quantum dot (FeN/GQDs) nanozymes using a one-step solvothermal process, where individual iron atoms form strong bonds with graphene quantum dots through nitrogen coordination. Unlike previous studies, this method significantly simplifies the synthesis conditions for single-atom nanozymes, eliminating the need for high temperatures and employing environmentally friendly precursors derived from pineapple (ananas comosus) leaves. The resulting FeN/GQDs exhibited peroxidase-like catalytic activity and kinetics comparable to that of natural enzymes, efficiently converting H2O2 into hydroxyl radical species. Leveraging their excellent peroxide-like activity, FeN/GQDs nanozymes have been successfully applied to construct a colorimetric biosensor system characterized by remarkably high sensitivity for glucose detection. This achievement demonstrated a promising approach to designing single-atom nanozymes with both facile synthesis procedures and high catalytic activity, offering potential applications in wearable sensors and personalized health monitoring.

High-efficiency upconversion process in cobalt and neodymium doped graphene QDs for biomedical applications

Multiphoton absorbing upconversion nanoparticles are emerging as bioimaging materials but are limited by the low quantum yield of their visible fluorescence. This article contains colloids of graphene quantum dots (GQDs), Neodymium, and Cobalt doped Graphene Quantum dots (Co-GQDs and Nd-GQDs) surrounded by carboxylic acids are synthesized which especially are suitable for bio applications; in this way, carboxylic acid groups exchanged by Amoxicillin as an antibiotic with bactericidal activity. The XRD diffraction method, TEM microscope, UV-Vis, and photoluminescence spectroscopies characterize the synthesized materials. The synthesized Quantum dots (QDs) exhibit upconversion properties and their emission is centered at 480 nm, but a red shift was observed with the increase of the excitation wavelength. In the emission spectra of synthesized QDs that can be related to the defect levels introduced by passivation of the QDs in the structure, the results show that with the interaction of the surface QDs with more carboxylic groups, the redshift is not observed. As the results indicate an increase in the intensity of upconversion emission is recorded for Co-GQDs and Nd-GQDs. The absolute quantum efficiency (QY) for Co-GQDs and Nd-GQDs were determined to be 41% and 100% more than GQDs respectively. DFT calculations indicate a strong bond between graphene and cobalt and Neodymium atoms. In doped materials, there are trap levels between the band gap of the GQDs which are responsible for increasing the intensity of the upconversion phenomenon.

Efficient Tuning of the Opto-Electronic Properties of Sol-Gel-Synthesized Al-Doped Titania Nanoparticles for Perovskite Solar Cells and Functional Textiles

The efficient electron transport layer (ETL) plays a critical role in the performance of perovskites solar cells (PSCs). Ideally, an unobstructed network with smooth channels for electron flow is required, which is lacking in the pristine TiO₂-based ETL. As a potential solution, here we tuned the structure of TiO₂ via optimized heteroatom doping of Al. Different concentrations (1, 2, and 3 wt%) of Al were doped in TiO₂ and were successfully applied as an ETL in PSC using spin coating. A significant difference in the structural, opto-electronic, chemical, and electrical characteristics was observed in Al-doped TiO₂ structures. The opto-electronic properties revealed that Al doping shifted the absorption spectra toward the visible range. Pure titania possesses a bandgap of 3.38 eV; however, after 1, 2, and 3% Al doping, the bandgap was linearly reduced to 3.29, 3.25, and 3.18 eV, respectively. In addition, higher light transmission was observed for Al-doped TiO₂, which was due to the scattering effects of the interconnected porous morphology of doped-TiO₂. Al-doped titania shows higher thermal stability and a 28% lower weight loss and can be operated at higher temperatures compared to undoped titania (weight loss 30%) due to the formation of stable states after Al doping. In addition, Al-doped TiO₂ showed significantly high conductivity, which provides smooth paths for electron transport. Thanks to the effective tuning of band structure and morphology of Al-doped TiO₂, a significant improvement in current densities, fill factor, and efficiency was observed in PSCs. The combined effect of better Jsc and FF renders higher efficiencies in Al-doped TiO₂, as 1, 2, and 3% Al-doped TiO₂ showed 12.5, 14.1, and 13.6% efficiency, respectively. Compared to undoped TiO₂ with an efficiency of 10.3%, the optimized 2% Al doping increased the efficiency up to 14.1%. In addition, Al-doped TiO₂ also showed improvements in antibacterial effects, required for photoactive textiles.

Enhanced Response Speed in 2D Perovskite Oxides-Based Photodetectors for UV Imaging through Surface/Interface Carrier-Transport Modulation

The long-time decay process induced by the persistent photoconductivity (PPC) in metal oxides-based photodetectors (PDs) impedes our demands for high-speed photodetectors. 2D perovskite oxides, emerging candidates for future high-performance PDs, also suffer from the PPC effect. Here, by integrating 2D perovskite Sr₂Nb₃O₁₀ (SNO) nanosheets and nitrogen-doped graphene quantum dots (NGQDs), a unique nanoscale heterojunction is designed to modulate surface/interface carrier transport for enhanced response speed. Notably, the decay time is reduced from hundreds of seconds to a few seconds. The 4%NGQDs-SNO PD exhibits excellent performance with a photocurrent of 0.47 μA, a high on-off ratio of 2.2 × 10⁴, and a fast pulse response speed (τ_decay = 67.3 ms), making it promising for UV imaging. The trap-involved decay process plays a dominant role in determining the decay time, resulting in the PPC effect in SNO PD, and the trap states mainly originate from oxygen vacancies and chemisorbed oxygen molecules. A significantly enhanced photoresponse speed in NGQDs-SNO PDs can be ascribed to the modulated surface/interface trap states and the efficient carrier pathway provided by the nanoscale heterojunction. This work provides an effective way to enhance the response speed in 2D perovskite oxides constrained by PPC via surface/interface engineering, promoting their applications in optoelectronics.

Shedding Light on Graphene Quantum Dots: Key Synthetic Strategies, Characterization Tools, and Cutting-Edge Applications

During the last 20 years, the scientific community has shown growing interest towards carbonaceous nanomaterials due to their appealing mechanical, thermal, and optical features, depending on the specific nanoforms. Among these, graphene quantum dots (GQDs) recently emerged as one of the most promising nanomaterials due to their outstanding electrical properties, chemical stability, and intense and tunable photoluminescence, as it is witnessed by a booming number of reported applications, ranging from the biological field to the photovoltaic market. To date, a plethora of synthetic protocols have been investigated to modulate the portfolio of features that GQDs possess and to facilitate the use of these materials for target applications. Considering the number of publications and the rapid evolution of this flourishing field of research, this review aims at providing a broad overview of the most widely established synthetic protocols and offering a detailed review of some specific applications that are attracting researchers’ interest.

The electrochemical detection of prostate specific antigen on glassy carbon electrode modified with combinations of graphene quantum dots, cobalt phthalocyanine and an aptamer

Herein, a novel aptasensor is developed for the electrochemical detection of prostate specific antigen (PSA) on electrode surfaces modified using various combinations of a Cobalt phthalocyanine (CoPc), an aptamer and graphene quantum dots (GQDs). Electrochemical impedance spectroscopy (EIS) as well as differential pulse voltammetry (DPV) are employed for the detection of PSA. In both analytical techniques, linear calibration curves were observed at a concentration range of 1.2-2.0 pM. The glassy carbon electrode where CoPc and GQDs are placed on the electrode when non-covalently linked followed by addition of the aptamer (GQDs-CoPc(ππ)-aptamer (sequential)) showed the best performance with a limit of detection (LoD) as low as 0.66 pM when using DPV. The detection limits were much lower than the dangerous levels reported for PSA in males tested for prostate cancer. This electrode showed selectivity for PSA in the presence of bovine serum albumin, glucose and L-cysteine. The aptasensor showed good stability, reproducibility and repeatability, deeming it a promising early detection device for prostate cancer.

Synthesis of graphene quantum dots and their applications in drug delivery

This review focuses on the recent advances in the synthesis of graphene quantum dots (GQDs) and their applications in drug delivery. To give a brief understanding about the preparation of GQDs, recent advances in methods of GQDs synthesis are first presented. Afterwards, various drug delivery-release modes of GQDs-based drug delivery systems such as EPR-pH delivery-release mode, ligand-pH delivery-release mode, EPR-Photothermal delivery-Release mode, and Core/Shell-photothermal/magnetic thermal delivery-release mode are reviewed. Finally, the current challenges and the prospective application of GQDs in drug delivery are discussed.

Graphene Oxide: Graphene Quantum Dot Nanocomposite for Better Memristic Switching Behaviors

Tristable memristic switching provides the capability for multi-bit data storage. In this study, all-inorganic multi-bit memory devices were successfully manufactured by the attachment of graphene quantum dots (GQDs) onto graphene oxide (GO) through a solution-processable method. By means of doping GQDs as charge-trapping centers, the device indium-tin oxide (ITO)/GO:0.5 wt%GQDs/Ni revealed controllable memristic switching behaviors that were tunable from binary to ternary, and remarkably enhanced in contrast with ITO/GO/Ni. It was found that the device has an excellent performance in memristic switching parameters, with a SET1, SET2 and RESET voltage of -0.9 V, -1.7 V and 5.15 V, as well as a high ON2/ON1/OFF current ratio (103:102:1), and a long retention time (104 s) together with 100 successive cycles. The conduction mechanism of the binary and ternary GO-based memory cells was discussed in terms of experimental data employing a charge trapping-detrapping mechanism. The reinforcement effect of GQDs on the memristic switching of GO through cycle-to-cycle operation has been extensively investigated, offering great potential application for multi-bit data storage in ultrahigh-density, nonvolatile memory.

A review: recent advances in preparations and applications of heteroatom-doped carbon quantum dots

Carbon quantum dots (CQDs) are widely used in optoelectronic catalysis, biological imaging, and ion probes owing to their low toxicity, stable photoluminescence, and ease of chemical modification. However, the low fluorescence yield and monochromatic fluorescence of CQDs limit their practical applications. This review summarizes the commonly used approaches for improving the fluorescence efficiency of CQDs doped with non-metallic (heteroatom) elements. Herein, three types of heteroatom-doped CQDs have been investigated: (1) CQDs doped with a single heteroatom; (2) CQDs doped with two heteroatoms; and (3) CQDs doped with three heteroatoms. The limitations and future perspectives of doped CQDs from the viewpoint of producing CQDs for specific applications, especially for bioimaging and light emitting diodes, have also been discussed herein.