Highly fluorinated F-APP-TiO2 particle with hierarchical core-shell structure and its application in multifunctional superamphiphobic surface: Mechanical robustness, self-recovery and flame retardancy

A review of self-cleaning photocatalytic surface: Effect of surface characteristics on photocatalytic activity for NO

Self-cleaning surface has attracted much attention in the field of photocatalytic degradation of NO due to its dirt pickup resistance and self-cleaning effect under the action of rainwater. In this review, the factors affecting NO degradation efficiency were analyzed in terms of photocatalyst characteristics and environmental conditions combined with the photocatalytic degradation mechanism. The feasibility of photocatalytic degradation of NO on superhydrophilic, superhydrophobic and superamphiphobic surfaces was discussed. Furthermore, the effect of special surface characteristics of self-cleaning on photocatalytic NO was highlighted and the improvement of the long-term effect using three self-cleaning surfaces on photocatalytic NO was evaluated and summarized. Finally, the conclusion and outlook were proposed related to the self-cleaning surface for photocatalytic degradation of NO. In future research, the comprehensive effects of the characteristics of photocatalytic materials, self-cleaning characteristics and environmental factors on the photocatalytic degradation of NO and the actual application effects of such self-cleaning photocatalytic surfaces should be further clarified in combination with the engineering. It is believed that this review can provide some theoretical basis and support for the development of self-cleaning surfaces in the field of photocatalytic degradation of NO.

An intumescent flame-retardant system based on carboxymethyl cellulose for flexible polyurethane foams with outstanding flame retardancy, antibacterial properties, and mechanical properties

A novel and eco-friendly intumescent flame-retardant system based on sodium carboxymethyl cellulose (CMC) was established for wide-used flexible polyurethane foams (FPUFs). FPUF-(APP₆CMC₁)GN₁ with extremely uniform coatings extinguished and reached the UL-94 V-0 rating, and presented an improvement of thermal insulation properties. Moreover, there was a 58 % reduction in peak heat release rate for FPUF-(APP₆CMC₁)GN₁ compared with that of FPUF, and the microstructure analysis of char residues indicated that a perfect intumescent char layer had formed on the surface of FPUFs. Especially, CMC and GN enhanced the compactness and stability of char layers. Therefore, little volatile production was generated under the protection of physical layers in the high temperature as evaluated during the thermal degradation processes. Meanwhile, the flame-retardant FPUFs remained the ideal mechanical properties and obtained excellent antibacterial properties, and the antibacterial rates of E.coli and S.aureus were 99.9 % (FPUF-(APP₆CMC₁)GN₁). This work provides an eco-friendlier strategy for the design of multi-function FPUFs.

Bio-based phytic acid@polyurushiol‑titanium complex coated cotton fabrics with durable flame retardancy for oil-water separation

Bio-based hydrophobic coating modified cotton fabrics with durable flame retardancy are of high interest in the application of oil-water separation for not only avoiding the use of hazardous substances but also improving the fire safety during use. Herein, phytic acid@Polyurushiol‑titanium complex coated cotton fabric was developed using the facile dip-coating method involving the sequential immersion in the solution of poly(ethyleneimine), phytic acid, titanium oxide, and urushiol. The underlying coating accommodated abundance of phytic acid, which imparted excellent flame retardancy to cotton fabric, and the top coating composed of the polyurushiol‑titanium complex endowed cotton fabric with high hydrophobicity that the water contact angle (WCA) was up to 149.8°. The hydrophobicity also guaranteed effective protection of the underlying phytic acid against chemical solvents and abrasion. Besides, the hydrophobic coating allowed cotton fabric for good self-cleaning and effective oil-water separation. Therefore, the preparation of phytic acid@polyurushiol‑titanium complex coated cotton fabric offers a promising approach to construct durable biomass-coated cellulose-based fabric with multifunctionality.

Emerging Separation Applications of Surface Superwettability

Human beings are facing severe global environmental problems and sustainable development problems. Effective separation technology plays an essential role in solving these challenges. In the past decades, superwettability (e.g., superhydrophobicity and underwater superoleophobicity) has succeeded in achieving oil/water separation. The mixture of oil and water is just the tip of the iceberg of the mixtures that need to be separated, so the wettability-based separation strategy should be extended to treat other kinds of liquid/liquid or liquid/gas mixtures. This review aims at generalizing the approach of the well-developed oil/water separation to separate various multiphase mixtures based on the surface superwettability. Superhydrophobic and even superoleophobic surface microstructures have liquid-repellent properties, making different liquids keep away from them. Inspired by the process of oil/water separation, liquid polymers can be separated from water by using underwater superpolymphobic materials. Meanwhile, the underwater superaerophobic and superaerophilic porous materials are successfully used to collect or remove gas bubbles in a liquid, thus achieving liquid/gas separation. We believe that the diversified wettability-based separation methods can be potentially applied in industrial manufacture, energy use, environmental protection, agricultural production, and so on.

In Situ, One-Pot Method to Prepare Robust Superamphiphobic Cotton Fabrics for High Buoyancy and Good Antifouling

Multifunctional superamphiphobic cotton fabrics are in high demand. However, preparation of such fabrics is often difficult or complicated. Herein, a novel superamphiphobic fabric is constructed by a simple one-pot method with an in situ growth process. Under suitable alkaline conditions, dopamine (DA) can be oxidized to benzoquinone. Meanwhile, 3-aminopropyltriethoxysilane (APTES), 1H,1H,2H,2H-perfluorodecyltriethoxysilane (FAS-17) molecules undergo the hydrolysis reaction and bond together. Besides, benzoquinone can react with APTES by Schiff base and hollow nanoclusters can be finally obtained because of the steric hindrance effect of benzene ring and long alkyl chain. Such nanoclusters are formed on the surface of fabric, which endows the fabric with extreme liquid repellence. The effects of pH value and DA concentration on the surface morphology and lyophobic properties of the fabric are systematically studied. The water and pump oil contact angles of the superamphiphobic fabric obtained under the optimal reaction conditions can reach 160 and 151°, respectively. The lyophobicity of the fabric is maintained even after undergoing various harsh tests, showing significant durability and stability. In addition, the superamphiphobic fabric exhibits good antifouling and strong buoyancy ability. The superamphiphobic fabric can load 35 and 27.4 times its own weight in water and oil, respectively, which shows great potential in the field of functional textiles such as swimming suits, protective clothing, and life jackets in the future.

A strategy for preparing controllable, superhydrophobic, strongly sticky surfaces using SiO2@PVDF raspberry core-shell particles

In nature, wetting by water droplets on superhydrophobic materials is governed by the Cassie-Baxter or Wenzel models. Moreover, sticky properties, derived from these types of wettings, are required for a wide range of applications involving superhydrophobic materials. As a facile new strategy, a method employing a gaseous fluorine precursor to fabricate core-shell particles, comprising perfectly shaped fluorine shells with adjustable adhesive strength, is described in this paper. Silica was used as the hydrophilic core, while polyvinylidene fluoride (PVDF) was used for the hydrophobic shell coating, forming a raspberry-like shape. In addition, controlling the amount of PVDF coated on the silica surface enabled the water droplets to come into contact with both the PVDF of the shell and the silica of the core, thereby controlling both the superhydrophobicity and the adhesive strength. Thus, the synthesized particles formed a structured coating with controllable stickiness and contact angles of 131-165°. Furthermore, on surfaces with high adhesivity, the water droplets remained stable at tilt angles of 90° and 180° even under a strong centrifugal force, whereas on surfaces with low adhesivity, the water droplets slid off when the substrate was tilted at 4°.

Bioinspired Metal-Intermetallic Laminated Composites for the Fabrication of Superhydrophobic Surfaces with Responsive Wettability

Hundreds of copper and titanium foils were applied to prepare biomimetic metal-intermetallic laminated composites by diffusion bonding. The cross sections of the obtained diffusion bonded bulks were etched selectively with FeCl₃ solution to get regular microarray structures. This kind of microstructure was controlled accurately and promptly by simple parameter adjustment. The etched surfaces were modified with 1-dodecanethiol, and the water contact angles (WCAs) were measured. The relationship between the microstructure and wettability of the achieved material was discussed, and the reason for the anisotropic wettability was also analyzed. Then etched surfaces were anodized in different electrolyte solutions to obtain different nanostructures. The morphology and chemical compositions of the surfaces were analyzed. The surfaces with CuO nanostructures by modification show superhydrophobicity with self-cleaning, on which the WCA and water sliding angle are 160.9° and 0.8°, respectively. The surfaces with TiO₂ nanostructures without modification show ultraviolet light-responsive wettability. After modification with 11-mercaptoundecanoic acid and 1-decanethiol, the surfaces also exhibit pH-responsive wettability. The superhydrophobic surfaces with responsive wettability have potential applications in biotechnology and microfluidics.

Superamphiphobic coatings with antifouling and nonflammable properties using functionalized hydroxyapatite

Functional superamphiphobic coatings have attracted much attention due to their promising application prospects in oil transportation and anti-contamination, which call for the requirements of flame retardancy.

Effect of Silica Size and Content on Superamphiphobic Properties of Silica-Fluoropolymer Core-Shell Coatings

We present a facile approach to fabricate superamphiphobic surfaces by spray coating silica-fluoropolymer core-shell particles without substrate pretreatment with an additional binder resin. A series of SiO2@poly(1H,1H,2H,2H-heptadecafluorodecyl methacrylate) (SiO2@PFMA) core-shell particles with core particles of different sizes were prepared via thiol-lactam initiated radical polymerization (TLIRP). The surface of each SiO2 particle with an average particle size of 12, 80, 150, and 350 nm was modified with (3-mercaptopropyl) trimethoxysilane and used as a seed for TLIRP. The SiO2@PFMA particles with various SiO2 sizes and contents were coated on aluminum substrates by a spray gun and then thermally treated to form a stable, rough composite layer. During the spray coating, the core-shell particles were aggregated by rapid evaporation of the solvent and then irregularly adhered to the substrate resulting in hierarchical structures. In the case of SiO2@PFMAs with low SiO2 contents, the roughness created mainly by the polymer shell disappeared during heat treatment. However, the substrates coated with SiO2@PFMAs with high SiO2 contents maintained the roughness even after heat treatment. The core-shell particles prepared with 12 nm SiO2 formed a stable superamphiphobic surface. The water/hexadecane contact and sliding angles on an aluminum plate coated with SiO2@PFMA, prepared using 12 nm silica at 46 wt% silica content (12 nm-SiO2(46)@PFMA), were 178.5°/159.2° and 1°/7°, respectively. The cross-cut tape test showed that adhesion between the 12nm-SiO2(46)@PFMA and the aluminum substrate was classified as 5B. A glass surface spray-coated with the core-shell composite particles exhibited transparent superhydrophobicity and translucent superamphiphobicity by controlling the concentration of the coating solution.

Biomimetic fog collection and its influencing factors

This review starts with the main process of fog collection and then analyzes the influencing factors that affect the efficiency of fog collection.

Robust superhydrophobic polyurea@cellulose nanocrystal coating

A multifunctional superhydrophobic PU@CNC composite coating with self-cleaning properties and mechanical durability was fabricated using a facile spraying method.

Facile preparation of a superamphiphobic fabric coating with hierarchical TiO2 particles

A functional superamphiphobic fabric coating with hierarchical TiO₂ composite particles and inorganic adhesives displays excellent mechanical robustness, good chemical stability and self-healing property by a simple spraying method.