Sustainable production of nanoporous carbons: Kinetics and equilibrium studies in the removal of atrazine

Occurrence, ecological risk, and advanced removal methods of herbicides in waters: a timely review

Coastal pollution caused by the importation of agricultural herbicides is one of the main environmental problems that directly affect the coastal primary productivity and even the safety of human seafood. It is urgent to evaluate the ecological risk objectively and explore feasible removal strategies. However, existing studies focus on the runoff distribution and risk assessment of specific herbicides in specific areas, and compared with soil environment, there are few studies on remediation methods for water environment. Therefore, we systematically reviewed the current situation of herbicide pollution in global coastal waters and the dose-response relationships of various herbicides on phytoplankton and higher trophic organisms from the perspective of ecological risks. In addition, we believe that compared with the traditional single physical and chemical remediation methods, biological remediation and its combined technology are the most promising methods for herbicide pollution remediation currently. Therefore, we focus on the application prospects, challenges, and management strategies of new bioremediation systems related to biology, such as constructed wetlands, membrane bioreactor processes, and microbial co-metabolism, in order to provide more advanced methods for reducing herbicide pollution in the water environment.

Experimental and Theoretical Estimations of Atrazine's Adsorption in Mangosteen-Peel-Derived Nanoporous Carbons

Nanoporous carbons were prepared via chemical and physical activation from mangosteen-peel-derived chars. The removal of atrazine was studied due to the bifunctionality of the N groups. Pseudo-first-order, pseudo-second-order, and intraparticle pore diffusion kinetic models were analyzed. Adsorption isotherms were also analyzed according to the Langmuir and Freundlich models. The obtained results were compared against two commercially activated carbons with comparable surface chemistry and porosimetry. The highest uptake was found for carbons with higher content of basic surface groups. The role of the oxygen-containing groups in the removal of atrazine was estimated experimentally using the surface density. The results were compared with the adsorption energy of atrazine theoretically estimated on pristine and functionalized graphene with different oxygen groups using periodic DFT methods. The energy of adsorption followed the same trend observed experimentally, namely the more basic the pH, the more favored the adsorption of atrazine. Micropores played an important role in the uptake of atrazine at low concentrations, but the presence of mesoporous was also required to inhibit the pore mass diffusion limitations. The present work contributes to the understanding of the interactions between triazine-based pollutants and the surface functional groups on nanoporous carbons in the liquid-solid interface.

Performance of a C-containing Cu-based photocatalyst for the degradation of tartrazine: Comparison of performance in a slurry and CPC photoreactor under artificial and natural solar light

A carbon-containing Cu-based material (Cu@C) was used as photocatalyst for the degradation of a commonly food-industry azo-dye (tartrazine, also called Y5), under solar light at laboratory and pilot scale photoreactors. Important performance parameters such as dark adsorption capacity, catalyst́s loading and initial concentration of the dye were first optimized in a slurry photoreactor at laboratory scale under artificial solar light following the kinetics of degradation of the dye. Afterwards, the photocatalytic activity was investigated at pilot scale in a compound parabolic collector (CPC) photoreactor operating for 10 h of irradiation. The degradation of tartrazine is among the highest values reported for alternative metal oxide semiconductors, in both photoreactor configurations. Catalytic data revealed a 3 times faster degradation kinetics of tartrazine in the CPC photoreactor under natural solar light than in the slurry reactor under artificial solar light. This behavior indicates that a moderate photon flux in the CPC is more adequate to operate with the prepared photocatalyst, as it minimizes the recombination of charge carriers in the catalyst. This is important, since most of the photocatalytic tests designed to evaluate the activity of novel materials are frequently carried out under simulated solar light and disregard the impact of photon flux in outdoor conditions.

Optimization, equilibrium, adsorption behaviour of Cu/Zn/Fe LDH and LDHBC composites towards atrazine reclamation in an aqueous environment

Cu-Zn-Fe Layered double hydroxides (LDH) and LDH dispersed on bamboo biochar (LDHBC) was used to study the adsorption of Atrazine by characterizing the adsorption kinetics, isotherms and response surface methodology (RSM) to reveal interactive effects of pH, adsorbent dosage and adsorbate initial concentration towards LDH optimum performance. The estimate of parameters determined for Langmuir isotherm quantities were in the range (21.84-37.91 mg/g) for LDH and (63.64-87.04 mg/g) for LDHBC. Regeneration and reusability after five cycles detected that the adsorption efficiencies of the adsorbents were reduced to 36% for LDH and 66% for LDHBC. Box Behnken design analysis could further reveal optimized conditions for higher Atrazine removal by LDH up to 74.8%. The adsorption mechanisms could be determined by π-π interactions occurring at the interfaces by hydrogen bonding and pore filling effects.

TiO2-Modified Magnetic Nanoparticles (Fe3O4) with Antibacterial Properties

This paper presents the synthesis and characteristics of Fe₃O₄/C/TiO₂ hybrid magnetic nanomaterials with antibacterial properties. The materials used were obtained using a microwave-assisted two-stage precipitation method. In the first stage, magnetite nanoparticles (Fe₃O₄) were prepared with the precipitation method, during which an additional glucose layer was placed on them. Next, the surface of Fe₃O₄ nanoparticles was covered by TiO₂. It was observed that the addition of carbon and titanium dioxide caused a decrease in the average size of magnetite crystallites from 15.6 to 9.2 nm. Materials with varying contents of anatase phase were obtained. They were characterized in terms of phase composition, crystallite size, specific surface area, surface charge and the kinds of function groups on the surface. The results show a successful method of synthesizing hybrid magnetic nanoparticles, stable in a solution, with antibacterial properties under direct solar light irradiation. Compared to classical materials based on TiO₂ and used for water disinfection, the obtained photocatalytic nanomaterials have magnetic properties. Owing to this fact, they can be easily removed from water once their activity under direct irradiance in a given process has completed.

Adsorption of atrazine and 2,4-D pesticides on alternative biochars from cedar bark sawdust (Cedrella fissilis)

Bark residues of the forest species Cedrela fissilis were physically and chemically modified with zinc chloride (ZnCl₂) as an activating agent. The two modified materials were analyzed as adsorbents in removing atrazine and 2,4-D herbicides from effluents. Firstly, the precursor material and the modified ones were characterized by different techniques to identify the structural changes that occurred in the surfaces. Through TGA, it was observed that both modified materials have thermal stability close to each other and are highly superior to the precursor. X-ray diffractions proved that the amorphous structure was not altered, the three materials being highly heterogeneous and irregular. The micrographs showed that the treatments brought new spaces and cavities on the surface, especially for the material carbonized with ZnCl₂. The pH_PZC of the modified materials was close to 7.5. The physically modified material had a surface area of 47.31 m² g^-1 and pore volume of 0.0095 cm³ g^-1, whereas the carbonized material had a surface area of 98.12 m² g^-1 and pore volume of 0.0099 cm³ g^-1. Initial tests indicated that none of the adsorbents were efficient in removing 2,4-D. However, they showed good potential for removing atrazine. The Koble-Corrigan isothermal model best fits the experimental data, with a maximum capacity of 3.44 mg g^-1 and 2.70 mg g^-1 for physically modified and with ZnCl₂, respectively. The kinetic studies showed that the system tends to enter into equilibrium after 120 min, presenting good statistical indicators to the linear driving force model (LDF). The surface diffusion coefficients were 2.18×10^-9 and 2.37×10^-9 cm² s^-1 for atrazine adsorption on the physically and chemically modified materials. These results showed that the application of residues from the processing of cedar bark is promising. However, new future studies must be carried out to improve the porous development of the material and obtain greater adsorption capacities.

Effective adsorptive removal of atrazine herbicide in river waters by a novel hydrochar derived from Prunus serrulata bark

In this work, a novel and effective hydrochar was prepared by hydrothermal treatment of Prunus serrulata bark to remove the pesticide atrazine in river waters. The hydrothermal treatment has generated hydrochar with a rough surface and small cavities, favoring the atrazine adsorption. The adsorption equilibrium time was not influenced by different atrazine concentrations used, being reached after 240 min. The Elovich adsorption kinetic model presented the best adjustment to the kinetic data. The Langmuir model presented the greatest compliance to the isotherm data and indicated a higher affinity between atrazine and hydrochar, reaching a maximum adsorption capacity of 63.35 mg g^-1. Thermodynamic parameters showed that the adsorption process was highly spontaneous, endothermic, and favorable, with a predominance of physical attraction forces. In treating three real river samples containing atrazine, the adsorbent showed high removal efficiency, being above 70 %. The hydrochar from Prunus serrulata bark waste proved highly viable to remove atrazine from river waters due to its high efficiency and low precursor material cost.

Poly(β-cyclodextrin)-Activated Carbon Gel Composites for Removal of Pesticides from Water

Pesticides are widely used in agriculture to increase and protect crop production. A substantial percentage of the active substances applied is retained in the soil or flows into water courses, constituting a very relevant environmental problem. There are several methods for the removal of pesticides from soils and water; however, their efficiency is still a challenge. An alternative to current methods relies on the use of effective adsorbents in removing pesticides which are, simultaneously, capable of releasing pesticides into the soil when needed. This reduces costs related to their application and waste treatments and, thus, overall environmental costs. In this paper, we describe the synthesis and preparation of activated carbon-containing poly(β-cyclodextrin) composites. The composites were characterized by different techniques and their ability to absorb pesticides was assessed by using two active substances: cymoxanil and imidacloprid. Composites with 5 and 10 wt% of activated carbon showed very good stability, high removal efficiencies (>75%) and pesticide sorption capacity up to ca. 50 mg g-1. The effect of additives (NaCl and urea) was also evaluated. The composites were able to release around 30% of the initial sorbed amount of pesticide without losing the capacity to keep the maximum removal efficiency in sorption/desorption cycles.

Synthesis and Characterization of Magnetic Nanomaterials with Adsorptive Properties of Arsenic Ions

A new synthesis method of hybrid Fe₃O₄/C/TiO₂ structures was developed using microwave-assisted coprecipitation. The aim of the study was to examine the effect of the addition of glucose and titanium dioxide on adsorptive properties enabling removal of arsenic ions from the solution. The study involved the synthesis of pure magnetite, magnetite modified with glucose and magnetite modified with glucose and titanium dioxide in magnetite: glucose: titanium dioxide molar ratio 1:0.2:3. Materials were characterized by XRD, FT-IR, and BET methods. Magnetite and titanium dioxide nanoparticles were below 20 nm in size in obtained structures. The specific surface area of pure magnetite was approximately 79 m²/g while that of magnetite modified with titanium dioxide was above 190 m²/g. Obtained materials were examined as adsorbents used for removal As(V) ions from aqueous solutions. Adsorption of arsenic ions by pure magnetite and magnetite modified with titanium dioxide was very high, above 90% (initial concentration 10 mg/L), pH in the range from 2 to 7. The preparation of magnetic adsorbents with a high adsorption capacity of As(V) ions was developed (in the range from 19.34 to 11.83 mg/g). Magnetic properties enable the easy separation of an adsorbent from a solution, following adsorption.