Intrinsic acid resistance and high removal performance from the incorporation of nickel nanoparticles into nitrogen doped tubular carbons for environmental remediation

Fe doping enhanced Cr(VI) adsorption efficiency of cerium-based adsorbents: Adsorption behaviors and inner removal mechanisms

Cerium-based adsorbents possessed unique advantages of valence variability and abundant oxygen vacancies in hexavalent chromium (Cr(VI)) adsorption, but high cost and unstable properties restricted their application in Cr(VI) contained wastewater treatment. Herein, a series of bimetallic adsorbents with different cerium/iron ratios (CeFe@C) were prepared by adding inexpensive Fe into Ce-based adsorbents (Ce@C), and the effect of Fe doping on adsorption properties of Ce@C for Cr(VI) was investigated thoroughly. Compared with pristine Ce@C, CeFe@C exhibited excellent removal performance for Cr(VI), and the improved maximum adsorption capacity reached 75.11 mg/g at 25℃. Benefiting from Fe doping, CeFe@C had good regeneration property, with only 25 % decrease after five adsorption-desorption cycles. Contents of trivalent cerium (Ce(III)) and oxygen vacancies (Ov) in bimetallic adsorbents were positively correlated with divalent iron (Fe(II)) doping, indicating that the formation of Ce(III) and surface defects on Ce@C could be effectively regulated by Fe doping. Density functional theory (DFT) calculation results further proved that the doped Fe enhanced the electron transfer effectively and lowered the energy barriers of Cr(VI) adsorption onto Ce@C surface, strengthening the reduction and complexation to Cr(VI). This study provides new insights for improving the Cr(VI) removal performance by modified Ce-based adsorbents, and further promotes the utilization potentiality of low-cost and low-toxicity Ce-based adsorbents in Cr(VI)-containing wastewater treatment.

Efficient removal of hexavalent chromium by nano-cerium-based adsorbent: The critical role of valence state and oxygen vacancy

Cerium-based adsorbents have been gradually used for the adsorption removal of highly toxic Cr(VI) from wastewater due to their low toxicity and wide working pH. However, the intrinsic properties of adsorbents contribute significantly to their adsorption performance, and the relationship between them needs to be clarified. Herein, series of nano-cerium based adsorbents (Ce@Cs) with different surface defects and Ce(III) content were prepared to explore their effects on the Cr(VI) adsorption capacity. Results showed that the optimal Ce@C performed well over a wide pH range of 2.0-12.0, and the calculated Cr(VI) adsorption capacity reached 302.43 mg/g at 45 ℃. Ce(III) and surface defects in cerium-based adsorbents exhibited an important influence on the Cr(VI) adsorption performance of Ce@Cs, and their contents showed a good positive correlation with the Cr adsorption capacity (R2 =0.988 and 0.827). A series of evidences confirmed that the generated Ce(III) and oxygen vacancies could provide more sufficient coordination number to promote Cr(VI) complexation with Ce@Cs and lower the impedance of Ce@Cs to improve the reduction of Cr(VI) to low-toxic Cr(III). This work provides new insights into the Cr(VI) adsorption using cerium-based adsorbents, which helps to improve their potential in the purification of Cr(VI)-containing wastewater.

Electric Field-Assisted Uptake of Hexavalent Chromium Ions with In Situ Regeneration of Carbon Monolith Adsorbents

The uptake of hexavalent chromium (Cr(VI)) ions from wastewater is of great significance for environmental remediation and resource utilization. In this study, a self-designed instrument equipped with an oxidized mesoporous carbon monolith (o-MCM) as an electro-adsorbent is developed. o-MCM with a super hydrophilic surface displayed a high specific surface area (up to 686.5 m²  g^-1 ). With the assistance of an electric field (0.5 V), the removal capacity of Cr(VI) ions is as high as 126.6 mg g^-1 , much higher than that without an electric field (49.5 mg g^-1 ). During this process, no reduction reaction of Cr(VI) to Cr(III) ions is observed. After adsorption, the reverse electrode with 10 V is used to efficiently desorb the ions on the carbon surface. Meanwhile, the in situ regeneration of carbon adsorbents can be obtained even after ten recycles. On this basis, the enrichment of Cr(VI) ions in a special solution is achieved with the assistance of an electric field. This work lays a foundation for the uptake of heavy metal ions from wastewater with the assistance of the electric field.

Interconnected hierarchical nickel-carbon hybrids assembled by porous nanosheets for Cr(VI) reduction with formic acid

Magnetic carbon materials promise distinct advantages in the decontamination of heavy metal ions. In this work, a novel interconnected hierarchical nickel-carbon (Ni@IHC) hybrid was synthesized by combining the solvothermal method with a one-step pyrolysis under argon atmosphere. Benefitting from 3D flower-like morphology, interconnected porous nanosheets, large surface area, and abundant Ni nanoparticles, Ni@IHC hybrids can remove Cr(VI) within 25 min by using formic acid (FA) as a reductant at 25 ℃. Furthermore, the experimental parameters that can affect the material catalytic performance such as initial Cr(VI) concentration, catalyst dosage, FA concentration, and temperature were also investigated in detail. It was found that highly dispersed Ni nanoparticles contributed significantly to the reduction process. More importantly, the embedded Ni nanoparticles favor fast separation by a magnet and were helpful for the recycles use. This Ni@IHC hybrid was obtained by a facile and easy scale-up method, resulting in the fast transformation of Cr(VI) into Cr(III).