In-situ embedding cobalt-doped copper sulfide within ultrathin carbon nanosheets for superior lithium storage performance

Pseudocapacitance-Dominated MnNb2 O6 -C Nanofiber Anode for Li-Ion Batteries

MnNb2 O6 anode has attracted much attention owing to its unique properties for holding Li ions. Unluckily, its application as a Li-ion battery anode is restricted by low capacity because of the inferior electronic conductivity and limited electron transfer. Previous studies suggest that structure and component optimization could improve its reversible capacity. This improvement is always companied by capacity increments, however, the reasons have rarely been identified. Herein, MnNb2 O6 -C nanofibers (NFs) with MnNb2 O6 nanoparticles (~15 nm) confined in carbon NFs, and the counterpart MnNb2 O6 NFs consisting of larger nanoparticles (40-100 nm) are prepared by electrospinning for clarifying this phenomenon. The electrochemical evaluations indicate that the capacity achieved by the MnNb2 O6 NF electrode presents an activation process and a degradation in subsequence. Meanwhile, the MnNb2 O6 -C NF electrode delivers high reversible capacity and ultra-stable cycling performance. Further analysis based on electrochemical behaviors and microstructure changes reveals that the partial structure rearrangement should be in charge of the capacity increment, mainly including pseudocapacitance increment. This work suggests that diminishing the dimensions of MnNb2 O6 nanoparticles and further confining them in a matrix could increase the pseudocapacitance-dominated capacity, providing a novel way to improve the reversible capacity of MnNb2 O6 and other intercalation reaction anodes.

Emerging 2D Copper-Based Materials for Energy Storage and Conversion: A Review and Perspective

2D materials have shown great potential as electrode materials that determine the performance of a range of electrochemical energy technologies. Among these, 2D copper-based materials, such as Cu-O, Cu-S, Cu-Se, Cu-N, and Cu-P, have attracted tremendous research interest, because of the combination of remarkable properties, such as low cost, excellent chemical stability, facile fabrication, and significant electrochemical properties. Herein, the recent advances in the emerging 2D copper-based materials are summarized. A brief summary of the crystal structures and synthetic methods is started, and innovative strategies for improving electrochemical performances of 2D copper-based materials are described in detail through defect engineering, heterostructure construction, and surface functionalization. Furthermore, their state-of-the-art applications in electrochemical energy storage including supercapacitors (SCs), alkali (Li, Na, and K)-ion batteries, multivalent metal (Mg and Al)-ion batteries, and hybrid Mg/Li-ion batteries are described. In addition, the electrocatalysis applications of 2D copper-based materials in metal-air batteries, water-splitting, and CO₂ reduction reaction (CO₂ RR) are also discussed. This review also discusses the charge storage mechanisms of 2D copper-based materials by various advanced characterization techniques. The review with a perspective of the current challenges and research outlook of such 2D copper-based materials for high-performance energy storage and conversion applications is concluded.

Self-induced matrix with Li-ion storage activity in ultrathin CuMnO2 nanosheets electrode

Conversion anode materials such as Mn₃O₄ draw much attention due to their considerable theoretical capacity for lithium-ion batteries (LIBs). However, poor conductivity, slow solid-state Li-ion diffusion, and huge volume expansion of the active materials during charge/discharge lead to unsatisfied electrochemical performance. Despite several strategies like nanocrystallization, fabricating hierarchical nanostructures, and introducing a matrix are valid to address these crucial issues, the achieved electrochemical performance still needs to be further enhanced. What is worse, the matrix with less or no Li-ion storage activity may lower the achieved capacity of the electrodes. Herein, ultra-thin CuMnO₂ nanosheets with the thickness of 5-8 nm were evaluated for LIBs. The ultra-thin sheet-like nanostructure offers sufficient contact areas with electrolyte and shortens the Li-ion diffusion distance. Moreover, the in-situ generated Mn and Cu along with their oxides could play the role of matrix and conductive agent in turn at different stages, relieving the stress brought by volume expansion. Therefore, the as-prepared ultra-thin CuMnO₂ nanosheets electrode displays a remarkable reversible capacity, long cycling stability, and outstanding rate capability (a reversible capacity of 1160.5 mAh g^-1 at 0.1A g^-1 was retained after 100 cycles with a capacity retention of 95.1 %, and 717.8 mAh g^-1 at 2.0 A g^-1 after 400 cycles).

Dual-carbon coupled Co5.47N composites for capacitive lithium-ion storage

Transition metal nitrides are of great interest as potential anodes for lithium-ion batteries (LIBs) owing to their high theoretical capacity. However, poor cycling stability and rate performance greatly hinder their practical applications. To better alleviate these problems, a unique 3D hierarchical nanocomposite constructed by dual carbon-coated Co_5.47N nano-grains wrapped with carbon and reduced graphene oxide (Co_5.47N@C@rGO) was synthesized through one-step simultaneous nitridation and carbonization of zeolitic imidazolate frameworks@GO precursor. The 3D hierarchical Co_5.47N@C@rGO composite can combine the good conductivity and mechanical strength of rGO and a high theoretical capacity of Co_5.47N. When explored as anode material for LIBs, Co_5.47N@C@rGO exhibits a high reversible capacity of ~860 mAh g^-1 at a current density of 1.0 A g^-1 after 500 cycles and excellent high-rate capability (665 and 573 mAh g^-1 at current densities of 3.2 and 6.4 A g^-1, respectively). The excellent electrochemical performance of Co_5.47N@C@rGO can be ascribed to its hierarchically porous structure and the synergistic effect between Co_5.47N nano-grains and rGO.