Effective combination of CuFeO2 with high temperature resistant Nb-doped TiO2 nanotube arrays for CO2 photoelectric reduction

Recent Advances in Electrochemical, Photochemical, and Photoelectrochemical Reduction of CO2 to C2+ Products

Environmental problems such as global warming are one of the most prominent global challenges. Researchers are investigating various methods for decreasing CO₂ emissions. The CO₂ reduction reaction via electrochemical, photochemical, and photoelectrochemical processes has been a popular research topic because the energy it requires can be sourced from renewable sources. The CO₂ reduction reaction converts stable CO₂ molecules into useful products such as CO, CH₄ , C₂ H₄ , and C₂ H₅ OH. To obtain economic benefits from these products, it is important to convert them into hydrocarbons above C₂ . Numerous investigations have demonstrated the uniqueness of the CC coupling reaction of Cu-based catalysts for the conversion of CO₂ into useful hydrocarbons above C₂ for electrocatalysis. Herein, the principle of semiconductors for photocatalysis is briefly introduced, followed by a description of the obstacles for C₂₊ production. This review presents an overview of the mechanism of hydrocarbon formation above C₂ , along with advances in the improvement, direction, and comprehension of the CO₂ reduction reaction via electrochemical, photochemical, and photoelectrochemical processes.

Progress and perspectives on 1D nanostructured catalysts applied in photo(electro)catalytic reduction of CO2

Reducing CO₂ into value-added chemicals and fuels by artificial photosynthesis (photocatalysis and photoelectrocatalysis) is one of the considerable solutions to global environmental and energy issues. One-dimensional (1D) nanostructured catalysts (nanowires, nanorods, nanotubes and so on.) have attracted extensive attention due to their superior light-harvesting ability, co-catalyst loading capacity, and high carrier separation rate. This review analyzed the basic principle of the photo(electro)catalytic CO₂ reduction reaction (CO₂ RR) briefly. The preparation methods and properties of 1D nanostructured catalysts are introduced. Next, the applications of 1D nanostructured catalysts in the field of photo(electro)catalytic CO₂ RR are introduced in detail. In particular, we introduced the design of composite catalysts with 1D nanostructures, for example loading 0D, 1D, 2D, and 3D materials on a 1D nanostructured semiconductor to construct a heterojunction to optimize the photo-response range, carrier separation and transport efficiency, CO₂ adsorption and activation capacity, and stability of the catalyst. Finally, the development prospects of 1D nanostructured catalysts are discussed and summarized. This review can provide guidance for the rational design of advanced catalysts for photo(electro)catalytic CO₂ RR.

Nanocrystals of CuCoO2 derived from MOFs and their catalytic performance for the oxygen evolution reaction

In this work, two different solvothermal synthesis routes were employed to prepare MOF-derived CuCoO₂ (CCO) nanocrystals for electrocatalytic oxygen evolution reaction (OER) application. The effects of the reductants (ethylene glycol, methanol, ethanol, and isopropanol), NaOH addition, the reactants, and the reaction temperature on the structure and morphology of the reaction product were investigated. In the first route, Cu-BTC derived CCO (CCO1) nanocrystals with a size of ∼214 nm and a specific surface area of 4.93 m² g^-1 were prepared by using Cu-BTC and Co(NO₃)₂·6H₂O as the Cu and Co source, respectively. In the second route, ZIF-67 derived CCO (CCO2) nanocrystals with a size of ∼146 nm and a specific surface area of 11.69 m² g^-1 were prepared by using ZIF-67 and Cu(NO₃)₂·3H₂O as the Co and Cu source, respectively. Moreover, the OER performances of Ni foam supported CCO1 (Ni@CCO1) and CCO2 (Ni@CCO2) electrodes were evaluated in 1.0 M KOH solution. Ni@CCO2 demonstrates a better OER catalytic performance with a lower overpotential of 394.5 mV at 10 mA cm^-2, a smaller Tafel slope of 82.6 mV dec^-1, and long-term durability, which are superior to those of some previously reported delafossite oxide or perovskite oxide catalysts. This work reveals the preparation method and application potential of CCO electrocatalysts by using Cu-BTC/ZIF-67 as the precursor, providing a new approach for the preparation of delafossite oxide CCO and the enhancement of their OER performances.

Rational-Designed Principles for Electrochemical and Photoelectrochemical Upgrading of CO2 to Value-Added Chemicals

The chemical transformation of carbon dioxide (CO₂ ) has been considered as a promising strategy to utilize and further upgrade it to value-added chemicals, aiming at alleviating global warming. In this regard, sustainable driving forces (i.e., electricity and sunlight) have been introduced to convert CO₂ into various chemical feedstocks. Electrocatalytic CO₂ reduction reaction (CO₂ RR) can generate carbonaceous molecules (e.g., formate, CO, hydrocarbons, and alcohols) via multiple-electron transfer. With the assistance of extra light energy, photoelectrocatalysis effectively improve the kinetics of CO₂ conversion, which not only decreases the overpotentials for CO₂ RR but also enhances the lifespan of photo-induced carriers for the consecutive catalytic process. Recently, rational-designed catalysts and advanced characterization techniques have emerged in these fields, which make CO₂ -to-chemicals conversion in a clean and highly-efficient manner. Herein, this review timely and thoroughly discusses the recent advancements in the practical conversion of CO₂ through electro- and photoelectrocatalytic technologies in the past 5 years. Furthermore, the recent studies of operando analysis and theoretical calculations are highlighted to gain systematic insights into CO₂ RR. Finally, the challenges and perspectives in the fields of CO₂ (photo)electrocatalysis are outlined for their further development.

Nanoarray Structures for Artificial Photosynthesis

Conversion and storage of solar energy into fuels and chemicals by artificial photosynthesis has been considered as one of the promising methods to address the global energy crisis. However, it is still far from the practical applications on a large scale. Nanoarray structures that combine the advantages of nanosize and array alignment have demonstrated great potential to improve solar energy conversion efficiency, stability, and selectivity. This article provides a comprehensive review on the utilization of nanoarray structures in artificial photosynthesis of renewable fuels and high value-added chemicals. First, basic principles of solar energy conversion and superiorities of using nanoarray structures in this field are described. Recent research progress on nanoarray structures in both abiotic and abiotic-biotic hybrid systems is then outlined, highlighting contributions to light absorption, charge transport and transfer, and catalytic reactions (including kinetics and selectivity). Finally, conclusions and outlooks on future research directions of nanoarray structures for artificial photosynthesis are presented.

CO2 photoelectroreduction with enhanced ethanol selectivity by high valence rhenium-doped copper oxide composite catalysts

CuO supported catalyst with high valence rhenium doping were specially studied for photoelectrocatalytic reduction of CO₂ to small molecular alcohols, which were synthesized by nitrate thermal decomposition method on anatase TiO₂ nanotube arrays (TiO₂-NTs). Photoelectrochemical measurements indicate that the high valence rhenium doping helps in improving the catalytic activity and selectivity of CuO supported catalysts. For the case of 6 wt% Re-doped CuO/TiO₂-NTs calcined at 723 K, the principal products are methanol and ethanol with yield up to 19.9 μmol and 7.5 μmol after 5 h photoelectrocatalysis at external potential of -0.4 V under simulated solar illumination. In contrast, the products catalyzed by undoped CuO/TiO₂-NTs are only methanol and formaldehyde. These results indicate that the high valence rhenium doping will promote the alcoholization process and benefit the CC coupling, leading to the selective conversion of CO₂ to ethanol. Furthermore, under suitable external potential (-0.5 V) the CO₂ conversion product is almost entirely composed of ethanol.

Recent Advances in TiO2-Based Heterojunctions for Photocatalytic CO2 Reduction With Water Oxidation: A Review

Photocatalytic conversion of CO₂ into solar fuels has gained increasing attention due to its great potential for alleviating the energy and environmental crisis at the same time. The low-cost TiO₂ with suitable band structure and high resistibility to light corrosion has proven to be very promising for photoreduction of CO₂ using water as the source of electrons and protons. However, the narrow spectral response range (ultraviolet region only) as well as the rapid recombination of photo-induced electron-hole pairs within pristine TiO₂ results in the low utilization of solar energy and limited photocatalytic efficiency. Besides, its low selectivity toward photoreduction products of CO₂ should also be improved. Combination of TiO₂ with other photoelectric active materials, such as metal oxide/sulfide semiconductors, metal nanoparticles and carbon-based nanostructures, for the construction of well-defined heterostructures can enhance the quantum efficiency significantly by promoting visible light adsorption, facilitating charge transfer and suppressing the recombination of charge carriers, resulting in the enhanced photocatalytic performance of the composite photocatalytic system. In addition, the adsorption and activation of CO₂ on these heterojunctions are also promoted, therefore enhancing the turnover frequency (TOF) of CO₂ molecules, so as to the improved selectivity of photoreduction products. This review focus on the recent advances of photocatalytic CO₂ reduction via TiO₂-based heterojunctions with water oxidation. The rational design, fabrication, photocatalytic performance and CO₂ photoreduction mechanisms of typical TiO₂-based heterojunctions, including semiconductor-semiconductor (S-S), semiconductor-metal (S-M), semiconductor-carbon group (S-C) and multicomponent heterojunction are reviewed and discussed. Moreover, the TiO₂-based phase heterojunction and facet heterojunction are also summarized and analyzed. In the end, the current challenges and future prospects of the TiO₂-based heterostructures for photoreduction of CO₂ with high efficiency, even for practical application are discussed.

Highly Selective, Defect-Induced Photocatalytic CO2 Reduction to Acetaldehyde by the Nb-Doped TiO2 Nanotube Array under Simulated Solar Illumination

The adsorption and activation of CO₂ molecules on the surface of photocatalysts are critical steps to realize efficient solar energy-induced CO₂ conversion to valuable chemicals. In this work, a defect engineering approach of a high-valence cation Nb-doping into TiO₂ was developed, which effectively enhanced the adsorption and activation of CO₂ molecules on the Nb-doped TiO₂ surface. A highly ordered Nb-doped TiO₂ nanotube array was prepared by anodization of the Ti-Nb alloy foil and subsequent annealing at 550 °C in air for 2 h for its crystallization. Our sample showed a superior photocatalytic CO₂ reduction performance under simulated solar illumination. The main CO₂ reduction product was a higher-energy compound of acetaldehyde, which could be easily transported and stored and used to produce various key chemicals as intermediates. The acetaldehyde production rate was over ∼500 μmol·g^-1·h^-1 with good stability for repeated long-time uses, and it also demonstrated a superior product selectivity to acetaldehyde of over 99%. Our work reveals that the Nb-doped TiO₂ nanotube array could be a promising candidate with high efficiency and good product selectivity for the photocatalytic CO₂ reduction with solar energy.

One-step electrosynthesis of visible light responsive double-walled alloy titanium dioxide nanotube arrays for use in photocatalytic degradation of dibutyl phthalate

Using Ti-6Al-4V (TC4) alloy as a substrate, double-walled alloy titanium dioxide nanotube arrays (DW-ATNTAs) with a special porous inner wall and visible light response are synthesized in situ by an improved anodization method. During the anodization, the V element in the TC4 alloy converts into V₂O₅ which dominates the visible light response of DW-ATNTAs. After 3 h of irradiation with visible light, there is a nearly 97% reduction of dibutyl phthalate (DBP) by DW-ATNTAs in which the degradation kinetic constant is 50 and 7 times higher than that of titanium dioxide nanotube arrays (TNTAs) and alloy titanium dioxide layers (A-TiO₂(plate)), respectively. The richly porous inner wall structure of DW-ATNTAs can provide sufficient vacancies for adsorption and active sites for photocatalytic reaction. Furthermore, the differences in the morphology of the inner and outer walls are attributed to the thicker carbon and fluorine-rich oxide layer (C, F-rich oxide layer) resulting from a longer time that the inner wall spends in contact with the electrolyte during the anodization process. This special porous inner wall structure was formed due to the anti-corrosion properties of the alloy caused by appropriate amounts of V and Al as well as the removal of C and F elements during the calcination process.

The corrosion resistance, cytotoxicity, and antibacterial properties of lysozyme coatings on orthodontic composite arch wires

Objective: The corrosion resistance of new orthodontic composite arch wires (CAWs), which have excellent mechanical properties in a simulated oral environment, must be improved. This study explored the susceptibility to corrosion, in vitro cytotoxicity, and antibacterial properties of lysozyme-coated CAWs. Methods: Lysozyme coating of laser-welded CAW surfaces was prepared by liquid phase deposition. Four groups of CAW specimens were prepared: uncoated CAWs and CAWs coated with 20, 40, and 60 g L⁻¹ lysozyme. The surface morphology of the lysozyme coatings was characterized by atomic force microscopy. The samples were immersed in artificial saliva (AS) for 2 weeks, and corrosion morphology was then observed by scanning electron microscopy. Corrosion behavior was characterized according to weight loss and electrochemical properties. The cytotoxicity and antibacterial properties of lysozyme-coated CAWs were assessed by cell counting kit-8 assay and a live/dead bacterial test, respectively. Results: Surfaces in the three lysozyme coating groups exhibited film-like deposition, the thickness of which increased with the lysozyme concentration. Surface pitting and copper ion precipitation decreased with increasing lysozyme concentration in coatings. The corrosion tendency declined as the corrosion and pitting potentials decreased. The corrosion morphology and electrochemical parameters together indicated that lysozyme coatings increased corrosion resistance. The coatings also reduced cytotoxicity to L-929 cells and increased anti-Staphylococcus aureus ability. Conclusions: Lysozyme coating of CAW surfaces by liquid phase deposition improved the corrosion resistance of CAWs. The protective coatings improved biocompatibility and endowed the CAW surfaces with certain degrees of anti-Staphylococcus aureus activity. Different lysozyme concentrations had different protective effects, with 40 g L⁻¹ maybe being the ideal lysozyme concentration for CAW coatings.

The corrosion resistance of new orthodontic composite arch wires (CAWs), which have excellent mechanical properties in a simulated oral environment, must be improved.