Facile synthesis of flower-like CoFe2O4 particles for efficient sorption of aromatic organoarsenicals from aqueous solution

Rare [Cu4I2]2+ cationic cluster-based metal-organic framework and hierarchical porous composites design for effective detection and removal of roxarsone and antibiotics

Fluorescence quenching induced by photoinduced electron transfer (PET) stands as an effective strategy for identifying water pollutants. Herein, a novel (4, 8)-connected three-dimensional framework Cu(I)-MOF ([Cu2I(tpt)]n) with unique 8-connected [Cu4I2]2+ cationic clusters is designed by employing the nitrogen-rich ligand (Htpt = 5-[4(1H-1,2,4-triazol-1-yl)]phenyl-2H-tetrazole). Water-stabilized Cu(I)-MOF exhibits outstanding fluorescence properties, facilitating its application in detecting organic pollutants in water. Benefiting from the fact that the Cu(I)-MOF possesses a higher lowest unoccupied molecular orbitals (LUMO) energy level than that of the analyte, the rapid d-PET can occur, entitling Cu(I)-MOF to a sensitive fluorescence quenching response to roxarsone (ROX), nitrofurazone (NFZ) and nitrofurantoin (NFT) (with detection limits as low as 0.13 µM, 0.15 µM, and 0.13 µM, respectively). The nitrogen-containing sites of melamine foam (MF) are utilized to facilitate the anchoring and growth of Cu-MOF crystals, which enables the preparation of hierarchical microporous - macroporous Cu(I)-MOF/MF composites. The ordered porous structure of Cu(I)-MOF/MF provides cavities and open sites for the efficient removal of ROX (qmax = 210.6 mg∙g-1), NFZ (qmax = 111.5 mg∙g-1) and NFT (qmax = 238.9 mg∙g-1) from water. This characteristic endows the Cu(I)-MOF/MF with rapid and recyclable adsorption capacity. Therefore, this work provides valuable insights to address the problem of detection and removal of pollutants in the aquatic environment.

Optimizing magnetic, dielectric, and antimicrobial performance in chitosan-PEG-Fe2O3@NiO nanomagnetic composites

There is a growing interest in eco-friendly and cost-effective organic-inorganic nanocomposites due to their alignment with the principles of "green" chemistry, as well as their biocompatibility and non-toxicity. This study focused on producing Chitosan-PEG-Fe2O3@NiO nanomagnetic composites to improve the stability, dielectric properties, and antimicrobial effectiveness of these nanocomposite materials. The process involved synthesizing Fe2O3@NiO via sol-gel and polymerizing chitosan-PEG. The nanocomposites were characterized by XRD, TEM, FTIR, optical, dielectric, and VSM. Incorporating Fe2O3@NiO significantly improved stability, and the interaction with Fe2O3 during the sol-gel process facilitated the formation of NiFe2O4 with an increase in the crystallinity within the chitosan-PEG matrix. The study examined optical and dielectric properties, highlighting that the 3 NiO-doped chitosan-PEG-Fe2O3 composites had high electrical conductivity (1.8 ∗ 10-3 S/cm) and a significant dielectric constant (106 at low frequencies). As the ratio of NiO NPs within the chitosan-PEG-Fe2O3 increases, the energy band gap of chitosan-PEG-Fe2O3 films decreases up to 3.7 eV. This decrease is owing to the quantum confinement effect. These composites also demonstrated improved antimicrobial activity against E. coli and S. aureus and higher activity in the presence of nanomagnetic particles. The minimum inhibitory concentrations of CS-PEG-Fe2O3/NiO NPs against (Bacillus cereus, M. luteus, S. aureus and (S. enterica, H. pylori, E. coli) were (22-35 mm) and (21-34 mm), respectively.

Phenylarsonics in concentrated animal feeding operations: Fate, associated risk, and treatment approaches

Phenylarsonics are present as additives in animal feed in some countries. As only a small fraction of these additives is metabolized in animals, they mostly end up in the environment. A comprehensive investigation of the fate of these additives is crucial for evaluating their risks. This review aims to provide a clear understanding of the transformation mechanism of phenylarsonics in vivo and in vitro and to evaluate their fate and associated risks. Degradation of phenylarsonics releases toxic As species (mainly as inorganic arsenic (iAs)). Trivalent phenylarsonics are the metabolites or biotic degradation intermediates of phenylarsonics. The cleavage of As groups from trivalent phenylarsonics catalyzed by C-As lyase or other unknown pathways generates arsenite (As(III)). As(III) can be further oxidized to arsenate (As(V)) and methylated to methyl-arsenic species. The half-lives associated with abiotic degradation of phenylarsonics ranged from a few minutes to tens of hours, while those associated with biotic degradation ranged from several days to hundreds of days. Abiotic degradation resulted in a higher yield of iAs than biotic degradation. The use of phenylarsonics led to elevated total As and iAs levels in animal products and environmental matrices, resulting in As exposure risk to humans. The oxidation of phenylarsonics to As(V) facilitated the sorptive removal of As, which provides a general approach for treating these compounds. This review provides solid evidence that the use of phenylarsonics has adverse effects on both human health and environmental safety, and therefore, supports their withdrawal from the global market.

A high-efficiency mediator-free Z-scheme Bi2MoO6/AgI heterojunction with enhanced photocatalytic performance

A high-efficiency Z-scheme Bi₂MoO₆/AgI heterojunction was designed and fabricated via in situ growth of AgI on Bi₂MoO₆. Its photocatalytic activity was investigated with the degradation of malachite green (MG). After 40 min of visible light irradiation, near complete degradation of MG (20 mg/L) occurred when BA11 (Bi₂MoO₆:AgI = 1:1, 2.0 g/L) was present, while only 29.0% and 49.7% of the MG could be degraded in the presence of Bi₂MoO₆ and AgI, respectively. The excellent photocatalytic activity of BA11 results from strong visible light absorption and the low recombination efficiency of photogenerated electron-hole pairs induced by the formation of heterojunction. Density function theory (DFT) calculations revealed that the formation of built-in electric field at the interface between Bi₂MoO₆ and AgI facilitates the effective separation and transfer of photogenerated charge carriers. Results of reuse experiments indicated that the heterostructured photocatalyst has excellent stability. Radical scavenging experiments and electron spin resonance spectra showed that superoxide radicals (O₂^-) and hydroxyl radicals (OH) were the major reactive oxygen species in the photocatalytic system. The photocatalytic degradation pathway of MG was proposed based on the organic degradation intermediates detected. These findings demonstrate that the mediator-free Z-scheme Bi₂MoO₆/AgI heterojunction could serve as a promising photocatalyst in photocatalytic treatment of organic pollutants.

Efficient degradation of roxarsone and simultaneous in-situ adsorption of secondary inorganic arsenic by a combination of Co3O4-Y2O3 and peroxymonosulfate

Roxarsone (ROX), as one of aromatic organoarsenic compounds (AOCs), is extensively used in livestock industry, which tends to transform into high-toxic inorganic arsenic in environments. Herein, a bifunctional Co₃O₄-Y₂O₃, possessing extremely excellent catalytic and adsorption performance due to the synergy of Co₃O₄ and Y₂O₃, was designed and employed to activate peroxymonosulfate (PMS) for the elimination of ROX and the simultaneous in-situ adsorption of secondary inorganic arsenic, in which Co₃O₄ acted as the primary catalyst, and Y₂O₃ served as the main adsorbent. 50 μM (3.75 mg-As/L) of ROX was almost completely degraded, coupled with the conversion of As(III) to As(V) in the system of Co₃O₄-Y₂O₃ (0.2 g/L) and PMS (0.5 mM) within 15 min at initial pH 7. Meanwhile, > 99.3% of the secondary As(V) would be removed within 120 min. The reactive oxygen species (ROS) were identified to be ^•OH, SO₄^•-, and ¹O₂, which were responsible for the ROX degradation and the formation of As(V). Simultaneously, the produced As(V) were effectively adsorbed via the ligand/anion exchange with surface -OH and CO₃^2- anions of Co₃O₄-Y₂O₃. The possible degradation pathways of ROX were further proposed on the basis of the intermediates identification. Our findings may provide an insight into the degradation of AOCs and the simultaneous removal of secondary inorganic arsenic via the PMS activation with Co₃O₄-Y₂O₃.

Adsorption and desorption of phenylarsonic acid compounds on metal oxide and hydroxide, and clay minerals

Adsorption and desorption of p-arsanilic acid (p-ASA) and roxarsone (ROX) on six soil minerals, including hematite (α-Fe₂O₃), goethite (α-FeOOH), ferrihydrite (Fe(OH)₃), aluminum oxide (α-Al₂O₃), manganese oxide (γ-MnO₂), and kaolinite, were studied, and the impact of solution matrices on their adsorption was systematically evaluated. Adsorption of p-ASA/ROX on the metal (hydro)oxide and clay minerals occurred quickly (mostly within 2 h), and could be well described by the pseudo second-order kinetic model. The apparent maximum adsorption capacities of α-Fe₂O₃, α-FeOOH, Fe(OH)₃, α-Al₂O₃, γ-MnO₂, and kaolinite (at an initial pH of 7.0) for p-ASA were 1.7, 0.9, 2.5, 0.08, 1.1, and 0.02 μmol/m², while those for ROX were 1.6, 0.7, 2.4, 0.1, 0.5, and 0.05 μmol/m², respectively. Besides adsorbing p-ASA/ROX, γ-MnO₂ also caused their oxidation. Experimental results suggest that formation of inner-sphere complexes through the arsonic acid group is the primary mechanism for adsorption of p-ASA/ROX on iron (hydro)oxides and γ-MnO₂, while outer-sphere complexation plays a critical role in their adsorption on α-Al₂O₃ and kaolinite. Adsorption of p-ASA/ROX on the metal (hydro)oxide and clay minerals was affected by solution pH, co-existing metal ions (Ca²⁺, Mg²⁺, Al³⁺, Cu²⁺, Fe³⁺, and Zn²⁺), oxyanions (H₂PO₄^-, HCO₃^-, and SO₄^2-), and humic acid. The solid-to-liquid partition coefficients of p-ASA during the desorption from α-Fe₂O₃, α-FeOOH, Fe(OH)₃, α-Al₂O₃, γ-MnO₂, and kaolinite were 0.47, 2.69, 4.38, 0.03, 30.4, and 0.1 L/g, while those of ROX were 0.28, 1.68, 3.48, 0.02, 4.0, and 0.02 L/g, respectively. Agricultural soils with lower contents of organic carbon exhibited higher adsorption capacities towards p-ASA/ROX, which indicates that soil minerals play a key role in the adsorption of phenylarsonic acid compounds while organic matter could have strong inhibitory effect. These findings could help better understand and predict the transport and fate of p-ASA/ROX in surface soils with low contents of organic matter.

The intrinsic microstructure of supramolecular hydrogels derived from α-cyclodextrin and pluronic F127: nanosheet building blocks and hierarchically self-assembled structures

Supramolecular hydrogels derived from the self-assembly of α-cyclodextrin with pluronic F127 were found to be built up with polypseudorotaxane nanosheets with a thickness of 30-40 nm and possessed flower-like hierarchically assembled structures. The findings in this work could provide critical guidance for material design for biomedical purposes.