The curious case of SDS self-assembly in glycerol: Formation of a lamellar gel

Spherulite formation in green nonaqueous media: The impact of urea on gelation in glycerol

HYPOTHESIS

Large macroscopic assemblies formed by a surfactant, sodium dodecylsulfate (SDS), and glycerol, can be directed to assemble in a hierarchical manner by the addition of a strong hydrogen-bond donor/acceptor, such as urea.

CONTEXT

Self-assembly in complex media is important to a range of applications, for instance in biological media, which are multi-component, to industrial formulations, where additives are present for flavour, texture, and preservation. Here, the gelation and self-assembly of sodium dodecylsulfate (SDS) in glycerol is explored in the presence of an additive, urea. Urea was chosen due to its importance both fundamentally and industrially, but also because of its ability to form strong H-bonds and interact with both glycerol and SDS.

EXPERIMENTAL

To cover the variety of length scales present in the gel-like phase, a combination of optical microscopy and small-angle X-ray scattering techniques were used to probe the micro- to nanoscale.

FINDINGS

On the microscale, the formation of a spectacular spherulite phase, even at low urea contents - 0.1 wt%, upon cooling was observed, a stark difference to the microfibrillar phase observed in the absence of urea. Interestingly, the nanostructure of the two crystalline phases were similar and showed negligible differences. This suggests that urea is not involved in the SDS/glycerol microfibril formation but instead directs the assembly of spherulites by bundling the microfibrils. These ternary systems are also probed as a function of urea content, SDS concentration, and temperature. The observations in this work highlight the importance of small molecules in the self-assembly process, which is relevant both fundamentally but also industrially, where small molecules are often added to formulations.

Unusual Structural Insights Revealed by Rheo-SAXS Studies of Nonaqueous Crystalline Gels

Glycerol is a nonaqueous polar solvent and is of interest in many industrial areas due to its beneficial properties, such as green production and biocompatibility. Our previous works have shown the presence of a fibrillar phase on the microscale that consists of lamellar sodium dodecyl sulfate (SDS) crystals containing interstitial glycerol on the nanoscale. The phase is gel-like at room temperature and demonstrates shear-thinning behavior upon application of a shear. Initially, small-angle X-ray scattering coupled with rheology (rheo-SAXS) measurements were performed to elucidate the structural transition of the gel phase under an applied shear, but it became clear that the aging process of the gel has a profound impact on both the gel nanostructure and also the mechanical properties. For younger gels, both the dissolution of SDS crystallites and the alignment of the fibrillar phase were seen. However, in the aged gels, an unexpected foam was formed at shear rates γ ˙ > 700 s-1. The microscopic structure of the foam phase was imaged using polarizing light microscopy and brightfield and darkfield optical microscopy. The nanostructure of the foam phase was investigated using rheo-SAXS. The foam phase was shown to be stabilized by the presence of SDS crystallites at the air-liquid interface, and the stability of the foam is high with foam persisting even t = 3 months after formation. These results highlight the importance of investigating green nonaqueous media and the gel aging process, both of which are interesting not only on a fundamental level but also for a range of industrial applications, from personal care products and cosmetics to food science.

Urea induces (unexpected) formation of lamellar gel-phase in low concentration of cationic surfactants

HYPOTHESIS

The unexpected formation of a lamellar structure with concomitant gelation in solutions containing high urea concentration (40 wt%) and relatively low amount of cationic surfactant (3 wt%), indicates that a hierarchically structured complex is formed by both molecules.

EXPERIMENTS

Gels formed by combination of aqueous solutions of urea and C₁₂TAB, C₁₄TAB or C₁₆TAB were prepared in different proportions and their structures at microscopic and mesoscopic levels were investigated using XRD and SAXS, respectively. The elastic and viscous moduli and yield stress of the samples were determined and correlated with the composition and structuration of the gels. The lamellar structure is reversibly thermically destroyed and this process was investigated using DSC.

FINDINGS

XRD revealed that, at microscopic scale, the gels are formed through crystallization of adducts containing surfactant molecules loaded into the cavities of honeycomb-like urea assemblies. Such crystalline phase arranges itself in lamellae with interplanar distance around ∼20-30 nm, which were observed by SAXS. This hierarchical structure is independent of the chain length of the cationic surfactants. The blocks of lamellae dispersed in the continuous phase form a three-dimensional rigid particulate network structure, giving the characteristic rheological behavior of a hydrogel. DSC revealed a reversible thermal transition at around 20-25 °C, beyond which the adducts and the lamellar phase are destroyed and micelles are formed. The characteristic transition temperature is independent of the chain length of the surfactant, and thus, it is not associated with their Krafft temperatures. The structures of the gels indicate that they resemble alpha-gels formed by fatty-alcohols and surfactants, although they self-assemble by different driving forces.

Co-assembly and Structure of Sodium Dodecylsulfate and other n-Alkyl Sulfates in Glycerol: n-Alkyl Sulfate-Glycerol Crystal Phase

HYPOTHESIS

Following the observation of a microfibrillar phase in sodium dodecylsulfate (SDS)-glycerol mixtures, it is hypothesized that this phase is a crystalline structure containing SDS and glycerol, where the interaction between sulfate and glycerol layers mediates the co-assembly, which also could be universal for similar systems formed by n-alkyl sulfate homologues. Experiment. n-alkyl sulfate glycerol solutions were studied using a combination of optical microscopy, small- and wide-angle X-ray scattering (SAXS/WAXS). Time-resolved SAXS was employed to determine the phase formation in SDS-glycerol-water mixtures.

FINDINGS

The microfibrillar crystalline phase was reproduced in even-chained n-alkyl sulfates with a chain length between 12 and 18 carbon atoms, where the phase lamellar period increased uniformly with the alkyl chain length. Reconstruction of electron density profiles from the diffraction patterns allowed the lamellar structural motif of the phase, the glycerol location and stoichiometry to be determined. When SDS-glycerol-water mixtures with water concentration below 6 wt% are isothermally solidified at 20 °C, SDS-glycerol crystals and/or anhydrous SDS form, where the former is inhibited by the latter at higher water concentrations. The learnings from the SDS-glycerol phase formation allows new gels to be created, utilising the glycerol-sulfate motif generating microfibrils. This expands the knowledge of the applicable formulation space for SDS-water containing mixtures.

Comparison of surfactant mass transfer with drop formation times from dynamic interfacial tension measurements in microchannels

Dynamic interfacial tension was studied experimentally during drop formation in a flow-focusing microchannel. A low viscosity silicone oil (4.6 mPa s) was the continuous phase and a mixture of 48% w/w water and 52% w/w glycerol was the dispersed phase. An anionic (sodium dodecylsulfate, SDS), a cationic (dodecyltrimethylammonium bromide, DTAB) and a non-ionic (Triton™ X-100, TX100) surfactant were added in the dispersed phase, at concentrations below and above the critical micelle concentration (CMC). For SDS and DTAB the drop size against continuous phase flowrate curves initially decreased with surfactant concentration and then collapsed to a single curve at concentrations above CMC. For TX100 the curves only collapsed at surfactant concentrations 8.6 times the CMC. From the collapsed curves a correlation of drop size with capillary number was derived, which was used to calculate the dynamic interfacial tension at times as low as 3 ms. The comparison of the surfactant mass transport and adsorption times to the interface against the drop formation times indicated that surfactant adsorption also contributes to the time required to reach equilibrium interfacial tension. Criteria were proposed for drop formation times to ensure that equilibrium interfacial tension has been reached and does not affect the drop formation.

Wet spinning of a library of carbohydrate low molecular weight gels

HYPOTHESIS

Recently, a low molecular weight hydrogel based on a carbohydrate alkyl amide has been successfully used as biomaterial for neuron cell culture and for 3D printing. Varying the molecular structure should make it possible to extend the library of carbohydrate low molecular weight hydrogels available for these applications and to improve their performances.

EXPERIMENTS

Thirteen molecules easy to synthetize and designed to be potentially biocompatible were prepared. They are based on gluconamide, glucoheptonamide, galactonamide, glucamide, aliphatic chains and glycine. Their gelation in water was investigated in thermal conditions and wet spinning conditions, namely by dimethylsulfoxide-water exchange under injection.

FINDINGS

Nine molecules give hydrogels in thermal conditions. By wet spinning, six molecules self-assemble fast enough, within few seconds, to form continous hydrogel filaments. Therefore, the method enables to shape by injection these mechanically fragile hydrogels, notably in the perspective of 3D printing. Depending on the molecular structure, persistent or soluble gel filaments are obtained. The microstructures are varied, featuring entangled ribbons, platelets or particles. In thermal gelation, molecules with a symmetrical polar head (galacto, glucoheptono) give flat ribbons and molecules with an asymmetrical polar head (gluco) give helical ribbons. The introduction of an extra glycine linker disturbs this trend.

Fracto-eutectogels: SDS fractal dendrites via counterion condensation in a deep eutectic solvent

Glyceline, a deep eutectic solvent comprising glycerol and choline chloride, is a green nonaqueous solvent with potential industrial applications. Molecular mechanisms of surfactant self-assembly in deep eutectic solvents are expected to differ from those in their constituent polar components and are not well understood. Here we report the observation of self-assembled SDS fractal dendrites with dimensions up to ∼mm in glyceline at SDS concentrations as low as cSDS ∼ 0.1 wt%. The prevalence of these dendritic fractal aggregates led to the formation of a gel phase at SDS concentrations above ≥1.9 wt% (the critical gelation concentration cCGC). The gel microscopic structure was visualised using polarised light microscopy (PLM); rheology measurements confirmed the formation of a colloidal gel, where the first normal stress difference was negative and the elastic modulus was dominant. Detailed nano-structural characterisation by small-angle neutron scattering (SANS) further confirmed the presence of fractal aggregates. Such SDS aggregation or gelation has not been observed in water at such low surfactant concentrations, whereas SDS has been reported to form lamellar aggregates in glycerol (a component of glyceline). We attribute the formation of the SDS fractal dendrites to the condensation of counterions (i.e. the choline ions) around the SDS aggregates - a diffusion-controlled process, leading to the aggregate morphology observed. These unprecedented results shed light on the molecular mechanisms of surfactant self-assembly in deep eutectic solvents, important to their application in industrial formulation.

Complex by design: Hydrotrope-induced micellar growth in deep eutectic solvents

HYPOTHESIS

The self-assembly of ionic surfactants in deep eutectic solvents has recently been demonstrated, opening up new possibilities in terms of the development of formulated products and templating of nanostructured materials. As it occurs in an aqueous environment, the solvophobic effect drives the formation of micelles in these solvents and specific-ion interactions alter the resulting structures. We hypothesized that the presence of hydrotropic salts would greatly affect the micellar structure in deep eutectic solvents, ultimately leading to the formation of worm-like aggregates.

EXPERIMENTS

A systematic investigation performed on hydrotrope-surfactant assemblies in neat and hydrated 1:2 choline chloride:glycerol is presented. The effect of choline salicylate on the micellization of hexadecyltrimethylammonium chloride at different hydrotrope-to-surfactant ratios was probed by contrast variation small-angle neutron scattering.

FINDINGS

Here the first investigation on salt-induced micellar growth in deep eutectic solvents is presented. The microscopic characterization of the system shows that the micelle-hydrotrope interaction in pure and hydrated deep eutectic solvents results in a significant increase in micelle elongation. The condensation of the hydrotrope on the micelle, which alters the effective monomer packing, leads to the formation of worm-like micelles with tunable morphology and flexibility. The results presented here present new possibilities in terms of self-assembly and co-assembly in neoteric solvents, where micelle morphology can be controlled through surfactant-salt interactions.