Ice-templated geopolymer beads for dye removal

Synergistic adsorption of methylene blue using ternary composite of phosphoric acid geopolymer, calcium alginate, and sodium lauryl sulfate

The removal of dyes from the aquatic ecosystem is necessary being a major threat to life. For enhanced remediation of methylene blue (MB) dye, a new ternary biopolymer-geopolymer-surfactant composite adsorbent is synthesized by combining phosphoric acid geopolymer (PAGP), calcium alginate (Alg), and sodium lauryl sulfate (SLS). During the synthesis of the composites, PAGP and SLS were mixed with the alginate matrix, producing porous hybrid beads. The PAGP-SLS-alginate (PSA) beads prepared were characterized using different analytical tools, i.e., scanning electron microscopy (SEM), Fourier transform infrared spectrophotometry (FTIR), X-ray diffractometry (XRD), surface area and porosimetery (SAP), and thermogravimetric analysis (TGA). To ascertain the ideal conditions for the adsorption process, a batch reactor procedure was used to investigate the effects of several parameters on MB adsorption, including pH (2, 4, 6, 8, 10), PSA adsorbent dosage (0.06-0.12 g), MB concentration (50-500 mg/L), contact time (15 to 300 min), and temperature (25, 35, and 45 °C). The SEM investigation indicated that ~ 1860 μm-sized PSA beads with 6-8 μm voids are generated. Based on XRD, FTIR, and SAP examinations, the material is amorphous, having numerous functional groups and an average pore size of 6.42 nm. Variation of pH has a little effect on the adsorption process, and the pH of 7.44 was found to be the pHpzc of the PSA beads. According to the findings of the batch study, equilibrium adsorption was obtained in 270-300 min, showing that the adsorption process was moderately slow-moving and effective. The dye adsorption linearly increased with initial dye concentration over concentration range of 50-500 mg/L and reciprocally decreased with rise in temperature. 0.06 g adsorbent dose, 25 °C, pH10, and 270 min were found to be the better conditions for adsorption experiments. Langmuir isotherm fitted well compared to Freundlich, Temkin, and Dubinin-Radushkevich (DR) isotherm models on the experimental data, and the maximum adsorption capacity(qmax) calculated was 1666.6 mg. g-1. Pseudo-second-order (PSO) kinetics model and multi steps (two) intra particle diffusion (IPD) model fitted well on the adsorption kinetics data. The system's entropy, Gibbs free energy, and change in enthalpy were measured and found to be -109.171 J. mol-1. K-1, - 8.198 to - 6.014 kJ. mol-1, and - 40.747 kJ. mol-1. Thermodynamics study revealed that adsorption process is exothermic, energetically favorable and resulting in the decrease in randomness. Chemisorption is found to be the dominant mechanism as confirmed by pH effect, Langmuir isotherm, PSO kinetics, IPD model, and thermodynamics parameters. PSA beads were successfully regenerated using ethanol in a course of 120 min and re-used for five times. To sum up, the PSA adsorbent's impressive adsorption capability of 1666.66 mg/g highlights its potential as a successful solution for methylene blue removal. The results of this study add to the expanding corpus of information on sophisticated adsorption materials and demonstrate PSA's potential for real-world uses in wastewater treatment and environmental clean-up.

Porous titania beads for remediation of arsenic contamination from acid mine drainage

Hierarchically porous titania beads with and without amine functionalisation have been developed and tested as adsorbents for removal of highly toxic As(V) from environments affected by acid mine drainage (AMD). The unique acid stability of the titania framework enables these adsorbents to function in highly acidified environments and their granular form facilitates practical deployment under continuous flow conditions. Herein, both non-functionalised and amine-functionalised titania beads have been demonstrated to selectively remove As(V) from simulated and real AMD solutions at pH 2.6. Novel selectivity for As(V) over Na(I), Mg(II), Al(III), Si(VI), Ca(II), Co(II), Cu(II), Zn(II), Nd(III) and Ho(III) was achieved, with competing element concentrations similar to or up to an order of magnitude greater than that of As(V). Although Fe(III) and some Fe(II) were also adsorbed by the titania beads, Fe adsorption did not inhibit As(V) adsorption, indicating different adsorption mechanisms for these two elements. The As(V) adsorption capacity of the titania beads decreased from ∼20 mg/g from pure As(V) solution to ∼10 mg/g from real AMD solution, demonstrating the importance of adsorbent testing under applied conditions. Amine functionalisation increased the kinetics of adsorption, but the non-functionalised titania beads showed greater selectivity for As(V) over Fe(II) and Fe(III) and hence were considered preferable for As remediation applications. Nevertheless, the functionalisation ability of the porous titania beads makes them a promising, flexible technology for remediation of a wide range of AMD affected environments.

Research and Application Progress of Geopolymers in Adsorption: A Review

Geopolymer is a porous inorganic material with a three-dimensional mesh structure, good mechanical properties, a simple preparation process (no sintering) and a low economic cost, and it is environmentally friendly. Geopolymer concrete has been widely used in the construction field, and many other studies have revealed that geopolymer will become one of the most promising inorganic materials with unique structure and properties. This paper provides a review of the development and current status of geopolymers and briefly explains the effects of material proportioning, experimental factors and activators on geopolymer performance. Because of the advantages of high specific surface area and high porosity, geopolymers could be used as adsorbent materials. This paper summarizes the research progresses of the adsorption of metal cations, anions, dyes, and gases by geopolymers, which emphasizes the geopolymer membranes in adsorption, and discusses the challenges and opportunities for the development of more efficient, sustainable and practical adsorption protocols.

Oleic Acid-Tailored Geopolymer Microspheres with Tunable Porous Structure for Enhanced Removal from Tetracycline in Saline Water

Tetracycline (TC) in the water body poses a huge threat to the ecological environment. There is a great challenge to develop highly efficient, green, low-cost and reusable adsorbents for TC removal from saline water. Herein, metakaolin-based geopolymer microspheres (MM) modified by oleic acid were proposed for the enhanced adsorption of TC from saline water. Experimental and characterization results showed that the introduction of oleic acid into the MM effectively adjusted the specific surface area, pore volume and zeta potential of the MM, thus accelerating the adsorption rate and enhancing the TC adsorption capacity of the MM. The adsorption process fitted well to the pseudo-second-order kinetic and Langmuir isothermal models. The Langmuir adsorption capacity of TC by the optimal MM, namely MM3 (0.3%, oleic acid), reached 645.7 mg·g−1 at 298 K, which was higher than many reported adsorbents. The adsorption process was endothermic and spontaneous. The MM3 had good adsorption performance of TC from saline water and regeneration performance. Moreover, the breakthrough curves of the MM3 in a column system were correlative with the Thomas and Yoon–Nelson models. The adsorption mechanisms of TC by the MM3 involved Van der Waals forces, electrostatic interactions, hydrogen–bonding interactions, and ion exchange.

Preparation of a surface modified fly ash-based geopolymer for removal of an anionic dye: Parameters and adsorption mechanism

Geopolymers have been recently studied as environmentally friendly and low-cost adsorbents especially for the removal of cationic species in wastewater treatment mainly because of their negative surface charge at spontaneous pH conditions. Although there are very few recent studies conducted with different geopolymer composites on anionic dyes, high cost, difficulty of the composite preparation and most importantly the necessity of very low pH values limit their usage. Hence, in this study, a simple and low-cost surface modification with CTAB was applied to a previously prepared fly ash-based geopolymer (GEO) for the removal of anionic Acid Blue 185 (AB185) without the need of strongly acidic conditions. Within this scope, the effects of CTAB dosage (1-5% by weight of GEO), adsorbent dosage (0.5-3.0 g L^-1) and initial dye concentration (10-50 mg L^-1) were studied as a function of retention time (5-300 min). For 40 min, the removal efficiency of AB185 substantially increased from 0.29 up to 79.36% for the respective GEO and its modified product with 4% CTAB (MGEO4). The efficiency increased with the adsorbent (MGEO4) dosage of up to 2.0 g L^-1 at which 89.20% was obtained for 300 min. However, a little decrease was observed down to 81.10% for 3.0 g L^-1. The efficiency values of 98.19 and 89.20% were obtained for the initial AB185 concentrations of 10 and 50 mg L^-1, respectively. The Langmuir-Hinshelwood kinetic model is highly correlated with the experimental results. The high adsorption capacity attained in a very short time suggests that the main mechanism is based on physical adsorption via the electrostatic attraction between MGEO4 and AB185. Overall results have indicated that the CTAB-modified fly ash-based geopolymer can be effectively used for the adsorption of AB185.

A novel alkali activated magnesium silicate as an effective and mechanically strong adsorbent for methylene blue removal

A novel, cheap, and easy-to-synthesize sepiolite-based alkali-activated material (Sep-AAM), synthesized by the reaction of a magnesium silicate source, sepiolite, with sodium silicate solution, demonstrating high mechanical strength and methylene blue (MB) removal performance is introduced. Kinetics data indicated that MB adsorption occurs through pseudo-second-order adsorption kinetics model, while the Langmuir isotherm model provided a better fit to adsorption isotherms. The Sep-AAM provided a removal capacity of 99.92 mg g^-1 at 50 °C, setting a new benchmark value among the materials used for this purpose. Thermodynamical parameters indicated that the adsorption of MB onto Sep-AAM was endothermic and the interaction between Sep-AAM and MB included weak chemical bonding. Regenerability of the Sep-AAM in powder and monolith forms was confirmed up to four-cycles. Structural parameters determined by several characterization tools demonstrated that the surface hydroxyl groups are responsible for the superior MB adsorption performance. The mechanical strength measurements showed that Sep-AAM in monolith form displayed a remarkable compressive strength value of 40 MPa. To establish a new approach forward on the development of AAMs for wastewater treatment, this study shows that sepiolite can effectively be utilized and Sep-AAM provides a sustainable solution for dye removal with advanced mechanical properties.

K2O-Metakaolin-Based Geopolymer Foams: Production, Porosity Characterization and Permeability Test

In this paper, four near-net shaped foams were produced via direct foaming, starting from a benchmark metakaolin-based geopolymer formulation. Hydrogen peroxide and metallic silicon were used in different amounts as blowing agents to change the porosity from meso- to ultra-macro-porosity. Foams were characterized by bulk densities ranging from 0.34 to 0.66 g cm⁻³, total porosity from 70% to 84%, accessible porosity from 41% to 52% and specific surface area from 47 to 94 m² g⁻¹. Gas permeability tests were performed, showing a correlation between the pore features and the processing methods applied. The permeability coefficients k₁ (Darcian) and k₂ (non-Darcian), calculated applying Forchheimer’s equation, were higher by a few orders of magnitude for the foams made using H₂O₂ than those made with metallic silicon, highlighting the differing flow resistance according to the interconnected porosity. The gas permeability data indicated that the different geopolymer foams, obtained via direct foaming, performed similarly to other porous materials such as granular beds, fibrous filters and gel-cast foams, indicating the possibility of their use in a broad spectrum of applications.

Design and modeling of the decolorization characteristics of a regenerable and eco-friendly geopolymer: Batch and dynamic flow mode treatment aspects

One of the most important environmental and health issues today is the elimination of the dye pollution from the contaminated water ecosystem. The use of geopolymers to eliminate such contaminants has recently emerged as a promising alternative. In this study, metakaolin based geopolymer (MKBG) was synthesized to be a promising adsorbent for Basic Blue 7 (BB7). To optimize the input parameters (solution pH, MKBG dose, mixing time, temperature, mixing speed, column diameter, and flow rate) towards BB7 removal by MKBG, a Box-Behnken design (BBD) was employed to develop the response model, followed by numerical optimization. The quadratic models correlating the adsorption variables to BB7 adsorption yield as responses were developed for batch and dynamic flow systems. The pseudo-second-order model accurately predicted the BB7 adsorption kinetics on MKBG. Decolorization yields of BB7 in batch and continuous systems reached 96 % and 56 %, respectively. The Langmuir model accurately described equilibrium data, thereby justifying monolayer and homogeneous adsorption. The MKBG demonstrated significant reusability up to 20 dynamic flow adsorption cycles. IR, SEM, and zeta potential measurements were used to describe the sorbent structure, and the mechanism of MKBG-BB7 interaction was assessed. Overall, MKBG offers a good application potential for the treatment of basic dye contaminated waters.

Hollow cellulose-carbon nanotubes composite beads with aligned porous structure for fast methylene blue adsorption

Polysaccharide based beads with unique porous structure have gained considerable interests due to their specific adsorption behaviors and biodegradability. The purpose of this paper was to develop hollow cellulose/carbon nanotubes composite beads with aligned porous structure which have potential applications in fast adsorption field. The composite beads were fabricated by ice template and freeze-drying technology. Different characterizations have proved that the carbon nanotubes and magnetic nanoparticles have been incorporated into the cellulose beads. Higher concentration of carbon nanotubes and cellulose would result in a larger diameter of the composite beads. The composite beads can effectively adsorb the methylene blue (MB). The pseudo-second-order model and Langmuir isotherm were best fitted to the adsorption. The composite beads showed a fast adsorption behavior towards MB with a t_1/2 of 1.07 min obtained from pseudo-second-order model. The maximum adsorption capacity was 285.71 mg g^-1 at pH 7.0. The composite beads also showed good reusability and biodegradability. We anticipate that different polysaccharides based composite beads with aligned porous structure can be obtained through the similar methods and applied in adsorption fields.

Application of gradient acid fractionation protocol to improve decolorization technology by lignin-based adsorbent

Wastewater contaminated with dyes is discharged by huge amount daily, and involved many hazardous materials. Thus, this study focused on introducing low cost, ecofriendly and available removal agent (lignin-based adsorbent). Three adsorbents, APKL-4, APKL-5 and APKL-6 were obtained using gradient acid precipitation technology and used for methylene blue (MB) removal. The samples were characterized by SEM, FT-IR and zeta potential analyzer. The results indicated that the three adsorbents exhibit significantly different adsorption behavior due to the structural differences caused by fractionation. The APKL-5 and APKL-6 have fewer hydrophilic groups in their molecules and thus have more adsorption active sites to load MB molecules. A pore structure inside of APKL-5 molecules is form in acid fractionation, which allows it to carry more MB molecules. The adsorption capacity of APKL-5 increased 3.8 times (from 345 to 1310 mg g^-1) in the alkaline solution which showing excellent pH responsiveness. This paper presents a new promising approach for preparing high efficiency, low cost and eco-friendly adsorbents and builds a foundation for developing further applications of lignin-based adsorbents.