Experimental and computational investigations on the anti-corrosive and adsorption behavior of 7-N,N'-dialkyaminomethyl-8-Hydroxyquinolines on C40E steel surface in acidic medium

Origanum Grosii Extracts as Novel Eco-Friendly Corrosion Inhibitors for Mild Steel In HCl Medium

Two green inhibitors extracted from an endemic species (Origanum grosii (Og)) using two solvents of different polarity (water and ethanol), OgW (aqueous extract) and OgE (ethanolic extract), were used for the anticorrosion of mild steel (M steel) in a 1 M HCl medium. Anticorrosive performance of OgW and OgE was assessed using standard electrochemical techniques, EIS/PDP measurements, weight loss method and SEM/EDX surface analysis. The results show that OgW achieves a maximum inhibition efficiency of 92 % and that the extract in aqueous medium (more polar) is more efficient than the extract in ethanolic medium (less polar). Both extracts act as mixed inhibitors and their corrosion process is predominantly governed by a charge transfer. Concentration and temperature effect was studied and shown that they are two antagonistic parameters for the evolution of inhibitory effectiveness of both OgW and OgE. The adsorption isotherms of the two inhibitors OgE and OgW obey to the Langmuir adsorption model. Moreover, the examination of SEM images and EDX spectra support a deposit of both extracts on the metal surface by an adsorption phenomenon. Besides, theoretical approach of the molecular structures of the major compounds M-OgW and M-OgE and inhibition efficiency was examined via DFT calculations and molecular dynamics simulations and it was consistent with the experimental findings.

Adsorption and Inhibition Mechanisms of New Pyrazole Derivatives for Carbon Steel Corrosion in Hydrochloric Acid Solutions Based on Experimental, Computational, and Theoretical Calculations

The study aims to synthesize two green pyrazole compounds, N-((1H-pyrazol-1-yl)methyl)-4-nitroaniline (L4) and ethyl 5-methyl-1-(((4-nitrophenyl)amino)methyl)-1H-pyrazole-3-carboxylate (L6), and test their action as corrosion inhibitors for carbon steel (CS) in a 1 M HCl solution. Both chemical and electrochemical methods, namely, gravimetric measurements (WL), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS), were used to assess the efficiency of the investigated molecules. DFT calculations at B3LYP/6-31++G (d, p) and molecular dynamics simulation were used to carry out quantum chemical calculations in order to link their electronic characteristics with the findings of experiments. The organic products exhibited good anticorrosion ability, with maximum inhibition efficiencies (IE %) of 91.8 and 90.8% for 10-3 M L6 and L4, respectively. In accordance with PDP outcomes, L6 and L4 inhibitors act as mixed-type inhibitors. Assessment of the temperature influence evinces that both L4 and L6 are chemisorbed on CS. The adsorption of L4 and L6 on CS appears to follow the Langmuir isotherm. Scanning electron microscopy and UV-visible disclose the constitution of a barrier layer, limiting the accessibility of corrosive species to the CS surface. Theoretical studies were performed to support the results derived from experimental techniques (WL, PDP, and EIS).

Assessment of New Imidazol Derivatives and Investigation of Their Corrosion-Reducing Characteristics for Carbon Steel in HCl Acid Solution

This study assessed the corrosion inhibitory and adsorption properties of two imidazol derivatives, namely 5-((2,4,5-triphenyl-1H-imidazol-1-yl)methyl)quinolin-8-ol (TIMQ) and 5-((2-(4-chlorophenyl)-4,5-diphenyl-1H-imidazol-1-yl)methyl)quinolin-8-ol (CDIQ), on carbon steel (CS) in 1 M of HCl using electrochemical methods, including electrochemical impedance spectroscopy (EIS), potentiodynamic polarization measurements (PDP), UV–visible spectroscopy (UV–v), scanning electron microscopy (SEM), and molecular modeling. The findings showed that TIMQ and CDIQ were potent inhibitors with inhibition efficiencies of 94.8% and 95.8%, respectively. The potentiodynamic polarization experiments showed that the inhibitors worked as mixed-type inhibitors, and the impedance investigations supported the improvement of a protective layer for the inhibitor on the metal surface. Each inhibitor was adsorbed onto the carbon steel surfaces, according to the Langmuir adsorption method. The steel was shielded from acidic ions by an adsorbed coating of the inhibitor molecules, according to SEM. Density functional theory (DFT) calculations and molecular dynamics (MD) simulations were used to inspect the results, and a good correlation was found between these results and those of the study. This information can be applied to determine the effectiveness of inhibitors in a HCl acid solution.

Synthesis of Bioactive Aminomethylated 8-Hydroxyquinolines via the Modified Mannich Reaction

8-hydroxyquinoline (oxine) is a widely known and frequently used chelating agent, and the pharmacological effects of the core molecule and its derivatives have been studied since the 19th century. There are several synthetic methods to modify this core. The Mannich reaction is one of the most easily implementable examples, which requires mild reaction conditions and simple chemical reagents. The three components of the Mannich reaction are a primary or secondary amine, an aldehyde and a compound having a hydrogen with pronounced activity. In the modified Mannich reaction, naphthol or a nitrogen-containing naphthol analogue (e.g., 8-hydroxyquinoline) is utilised as the active hydrogen provider compound, thus affording the formation of aminoalkylated products. The amine component can be ammonia and primary or secondary amines. The aldehyde component is highly variable, including aliphatic and aromatic aldehydes. Based on the pharmacological relevance of aminomethylated 8-hydroxyquinolines, this review summarises their syntheses via the modified Mannich reaction starting from 8-hydroxyquinoline, formaldehyde and various amines.

Theoretical and electrochemical evaluation of tetra-cationic surfactant as corrosion inhibitor for carbon steel in 1 M HCl

Recently, scientist study the role of surfactants for carbon steel corrosion protection. In the present study, newly tetra-cationic surfactant (CS4: 1,N1'-(ethane-1,2-diyl) bis (N1, N2-didodecyl-N2-(2- (((E)-3-hydroxy-4-methoxy-benzylidene)amino)ethyl)ethane-1,2-diaminium) chloride) based on Schiff-base compound(5,5'-((1E,17E)-2,5,8,11,14,17-hexaazaoctadeca-1,17-diene-1,18-diyl)bis(2-methoxyphenol) was synthesised, purified and characterized using FTIR and ¹HNMR spectroscopy. The synthesized Tetra-cationic surfactant (CS4) was evaluated as anti-corrosion for carbon steel (CS-metal) in aggressive 1 M HCl using electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques (PDP). CS4 compound had a good surface-active property by reducing the surface tension as a result to the hydrophobic chains role. The prepared CS4 behaved as hybrid inhibitor (mixed-type) by blocking the anodic and cathodic sites. CS4 exhibited good inhibition efficiency reached 95.69%. The surface morphology of CS-metal was studied using scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS)confirming the anti-corrosive effect of CS4 compound returned into the adsorption process of CS4 molecules over CS-metal which obeyed Langmuir adsorption isotherm. The inhibitive effect of CS4 was supported by theoretical quantum chemical studies using the density functional theory (DFT), Monte Carlo (MC) and Molecular Dynamic (MD) simulation.

Gravimetric and electrochemical statistical optimizations for improving copper corrosion resistance in hydrochloric acid using thiosemicarbazone-linked 3-acetylpyridine

Thiosemicarbazone-linked 3-acetylpyridine (T3AP), was synthesized and tested on copper strips in hydrochloric acid. Gravimetric measurements and electrochemical impedance spectroscopy were used to investigate the optimized inhibitory behavior of T3AP using the response surface methodology (RSM), with the optimized result obtained using a temperature of 42.90 °C, acid concentration of 2.38 M, inhibitor concentration of 3.80 mM, and time of 18.97 h, with inhibition efficiency up to approximately 93%. Validation of the experimental and predicted RSM showed that no significant difference in the inhibition efficiency with the confidence level value up to 97% was obtained. The isotherm study shows that T3AP obeys the Langmuir isotherm adsorption model, with physisorption and chemisorption adsorption mechanisms. The effectiveness of inhibitor performance of T3AP can be visually observed using scanning electron microscopy and X-ray photoelectron spectroscopy. The characterization revealed that the reactive S and N atoms in the T3AP inhibitor form strong chemical adsorption through N-Cu and Cu-S bonds on the copper surface. Computational analysis was also carried out, and we found that the stable energy gap between the occupied and unoccupied molecular orbitals (4.6891 eV) and high binding energy (540.962 kJ mol-1) adsorption from molecular dynamics were in agreement with the experimental findings.

The anti-corrosive behavior of benzo-fused N-heterocycles: an in silico study toward developing organic corrosion inhibitors

The work provides a computational protocol to predict the anti-corrosive performance of organic molecules through three successive phases of calculations; electron propagator theory (EPT), Monte Carlo (MC) simulations, and the density functional based tight-binding (DFTB) method. The protocol was applied to investigate the influence of two structural factors on the anti-corrosive performance of benzo fused-N-heterocycles (BFNHs) against the Fe(110) surface in an acidic medium; positional isomerism and the gradual insertion of nitrogen atoms in the heterocycle ring. The choice of BFNHs is attributed to their anti-corrosion activity and their use as building blocks in the molecular structure of many organic inhibitors. The findings indicate that EPT is a safe method for calculating the quantum chemical descriptors of the isolated molecules. Besides, the current work recommends using MC simulations and the DFTB method to describe the physical and chemical adsorption, respectively. Unexpected results were observed, as the gradual insertion of nitrogen atoms is not a specific factor for improving the inhibition efficiency of BFNHs. The findings were crystallized in equations linking the physical and chemical adsorption energies with the quantum chemical descriptors with a correlation exceeding 0.75. Besides, the peri steric hindrance plays an influential role in chemical adsorption. Intriguingly, the continuous introduction of nitrogen atoms does not increase the efficiency of the inhibitor along the way. For example, phthalazine exhibited better efficiency than benzotetrazine. In light of the above, the present protocol helps understand the anti-corrosive behavior of organic inhibitors and provides a feasible method to develop novel corrosion inhibitors.

pH-Triggered Release of NaNO2 Corrosion Inhibitors from Novel Colophony Microcapsules in Simulated Concrete Pore Solution

Herein, pH-sensitive microcapsules containing NaNO₂ corrosion inhibitors for protection of steel reinforced concrete were synthesized via water-in-oil-in-water (W/O/W) double emulsion using colophony as the wall material. The average microcapsule size was 79.07 μm in diameter and exhibited a high encapsulation efficiency of 83.2%. Study of the release of corrosion inhibitors from microcapsules in deionized water (DI water, pH 6.8), carbonate/bicarbonate buffer solution (CBS, pH 9.1), and simulated concrete pore solution (SCPS, pH 12.6) demonstrates that the microcapsules are sensitive to pH and display higher release in alkaline media. This is the first study of colophony as an encapsulating agent for corrosion inhibitors. Furthermore, the alkaline pH-triggered release shows the suitability of its use in reinforced concrete systems. A wide thermal stability range was also found for the colophony microcapsules up to 100 °C. These high pH environments (CBS and SCPS) present pH values above the pK_a of colophony (7.2), thus triggering enhanced inhibitor release by the ionization and deprotonation of colophony shell. The higher release in CBS and SCPS is demonstrated by the increases of the corrosion inhibitor diffusion coefficient by an order of magnitude from 3.30 × 10^-17 m²/s in DI water up to 1.66 × 10^-16 m²/s for SCPS. The release performance indicates that the proposed approach can be used to encapsulate a variety of inhibitors for the protection of steel reinforcements. After immersion in different pH solutions, the corrosion potentials of a carbon steel substrate with microcapsules containing nitrite were more noble than when immersed without microcapsules and the corrosion current densities showed comparable values to free corrosion inhibitors. The formation of a passive ferric oxide layer was confirmed by electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy.